Re: [asterisk-users] Asterisk + Orion E1 GSM Gateway
Hi Lex, Ok, so I switched the Sangoma for a Digium Quad E1 card, but still now luck. Here is my config, can you spot my mistake: zaptel: span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 loadzone=uk defaultzone=uk zapata: immediate=no switchtype=euroisdn signalling=pri_cpe group=1 callerid=asreceived channel = 1-15,17-31 I just cant get the E1 sync light on the Orion to light up green(according to the manual) I have tried crc on/off, pri_cpe/pri_net. I'm kinda running out of ideas! :) Lex Lethol wrote: Hi yusuf, I am working right now on a similar setup. If its the PRI type theres not so much on the syncing part. You need the PRI crossover rj45, theres info on voip-info on that and Orion has software to configure via Serial cable the E1 PRI as NET/USER and Time syncs. I setup mine via zaptel using css,hdb3,crc on the span. I am still debugging outogoing traffic but incoming is working OK. Lex On 12/18/06, yusuf [EMAIL PROTECTED] wrote: Leo Ann Boon wrote: yusuf wrote: Hi, I just got hold on an Orion E1 30 port GSM Gateway, and I am having problems trying to get the E1 link to come up. I am using Asteisk 1.2.12 with a Sangoma A101 card. I am quite familiar with E1's, both the Digium and Samgoma types, as I have successfully hooked up to many PBX's and such, but I just cant seem to get this one to work. None of the 30 channels 'come up'. What signailling, crc checking, should I be Master or slave? Sanity check: Have you read the fine manual :)? I understand Orion makes both ISDN PRI/Q.SIG and MFC/R2 type E1 channel banks. If it's the PRI type, standard zaptel with the appropriate NET/CPE setting on the CB should be ok. If it's a MFC/R2, then you'll have to try unicall. Leo Hi, crazy thing is I dont have any manual or anything, just the Gateway. From reading the 'sales' doc on the Orion site, this is a PRI/Q.SIg type. But I dont have anything else besides that. I dont even know how to get the Serial cable to work to configure the Gateway (through Minicom/Hyperterminal, there is a configuration on Orion, or so I'm told.) Can you help? -- thanks, yusuf -- thanks, yusuf -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Asterisk + Orion E1 GSM Gateway
Hi, I just got hold on an Orion E1 30 port GSM Gateway, and I am having problems trying to get the E1 link to come up. I am using Asteisk 1.2.12 with a Sangoma A101 card. I am quite familiar with E1's, both the Digium and Samgoma types, as I have successfully hooked up to many PBX's and such, but I just cant seem to get this one to work. None of the 30 channels 'come up'. What signailling, crc checking, should I be Master or slave? Anybody have experience on this? -- thanks, yusuf -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk + Orion E1 GSM Gateway
yusuf wrote: Hi, I just got hold on an Orion E1 30 port GSM Gateway, and I am having problems trying to get the E1 link to come up. I am using Asteisk 1.2.12 with a Sangoma A101 card. I am quite familiar with E1's, both the Digium and Samgoma types, as I have successfully hooked up to many PBX's and such, but I just cant seem to get this one to work. None of the 30 channels 'come up'. What signailling, crc checking, should I be Master or slave? Sanity check: Have you read the fine manual :)? I understand Orion makes both ISDN PRI/Q.SIG and MFC/R2 type E1 channel banks. If it's the PRI type, standard zaptel with the appropriate NET/CPE setting on the CB should be ok. If it's a MFC/R2, then you'll have to try unicall. Leo ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk + Orion E1 GSM Gateway
Leo Ann Boon wrote: yusuf wrote: Hi, I just got hold on an Orion E1 30 port GSM Gateway, and I am having problems trying to get the E1 link to come up. I am using Asteisk 1.2.12 with a Sangoma A101 card. I am quite familiar with E1's, both the Digium and Samgoma types, as I have successfully hooked up to many PBX's and such, but I just cant seem to get this one to work. None of the 30 channels 'come up'. What signailling, crc checking, should I be Master or slave? Sanity check: Have you read the fine manual :)? I understand Orion makes both ISDN PRI/Q.SIG and MFC/R2 type E1 channel banks. If it's the PRI type, standard zaptel with the appropriate NET/CPE setting on the CB should be ok. If it's a MFC/R2, then you'll have to try unicall. Leo Hi, crazy thing is I dont have any manual or anything, just the Gateway. From reading the 'sales' doc on the Orion site, this is a PRI/Q.SIg type. But I dont have anything else besides that. I dont even know how to get the Serial cable to work to configure the Gateway (through Minicom/Hyperterminal, there is a configuration on Orion, or so I'm told.) Can you help? -- thanks, yusuf -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk + Orion E1 GSM Gateway
Hi yusuf, I am working right now on a similar setup. If its the PRI type theres not so much on the syncing part. You need the PRI crossover rj45, theres info on voip-info on that and Orion has software to configure via Serial cable the E1 PRI as NET/USER and Time syncs. I setup mine via zaptel using css,hdb3,crc on the span. I am still debugging outogoing traffic but incoming is working OK. Lex On 12/18/06, yusuf [EMAIL PROTECTED] wrote: Leo Ann Boon wrote: yusuf wrote: Hi, I just got hold on an Orion E1 30 port GSM Gateway, and I am having problems trying to get the E1 link to come up. I am using Asteisk 1.2.12 with a Sangoma A101 card. I am quite familiar with E1's, both the Digium and Samgoma types, as I have successfully hooked up to many PBX's and such, but I just cant seem to get this one to work. None of the 30 channels 'come up'. What signailling, crc checking, should I be Master or slave? Sanity check: Have you read the fine manual :)? I understand Orion makes both ISDN PRI/Q.SIG and MFC/R2 type E1 channel banks. If it's the PRI type, standard zaptel with the appropriate NET/CPE setting on the CB should be ok. If it's a MFC/R2, then you'll have to try unicall. Leo Hi, crazy thing is I dont have any manual or anything, just the Gateway. From reading the 'sales' doc on the Orion site, this is a PRI/Q.SIg type. But I dont have anything else besides that. I dont even know how to get the Serial cable to work to configure the Gateway (through Minicom/Hyperterminal, there is a configuration on Orion, or so I'm told.) Can you help? -- thanks, yusuf -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
