On Fri, Feb 21, 2014 at 10:55 AM, Ruddy Gbaguidi wrote:
> Hi,
> Here is my scenario.
> I have a SIP call between two SIP endpoints. A calls B.
> During the ringing, B disconnects (network cable is unplugged).
>
> But A continue ringing forever (until the dial timeout) even if asterisk
> detects that B is disconnected with the qualify.
>
> Is there any setup or asterisk configuration I need to enable to have A
> close its call ?
>
> Note: when A is already talking with B, the call is hanged up on rtp
> timeout. But not during the Ringing phase.
I'm not sure it is possible to configure Asterisk to hang up during
the ringing phase when a peer/endpoint becomes unreachable. I don't
see an option or parameter for that behavior.
--
Rusty Newton
Digium, Inc. | Community Support Manager
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
direct: +1 256 428 6200
Check us out at: http://digium.com & http://asterisk.org
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
