Re: [asterisk-users] Google voice with no voice

[Joshua Colp]

Frank wrote:

My bad, I found it not loaded in my modules.conf.

This is now working.
What a pain. Is there a wiki page I can update in order to share the
configuration and how to have this work, with everybody ?


A wiki page for using it with the unsupported chan_gtalk / res_jabber 
combination is available at: 
https://wiki.asterisk.org/wiki/display/AST/Old+Calling+using+Google


A new channel driver for Asterisk 11 called chan_motif was written which 
replaces chan_gtalk and is fully supported. Details on using it with 
Google Voice is available at: 
https://wiki.asterisk.org/wiki/display/AST/Calling+using+Google


--
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at:  www.digium.com  & www.asterisk.org

--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
  http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Google voice with no voice

[Frank]

My bad, I found it not loaded in my modules.conf.

This is now working.
What a pain. Is there a wiki page I can update in order to share the 
configuration and how to have this work, with everybody ?


On 1/22/13 2:58 PM, Joshua Colp wrote:

Frank wrote:

Hi ,

So I tried

Answer()
Wait(1)
SendDTMF(1)

But I got an error in the console:

[Jan 22 14:54:13] WARNING[28067]: pbx.c:4458 pbx_extension_helper: No
application 'SendDTMF' for extension (gtalk_incoming, r...@gmail.com, 4)


The app_senddtmf.so module has to be built and loaded. You can load it
explicitly using "module load app_senddtmf.so". If that fails then it
was not built and you will have to look into why not.



--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
  http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Google voice with no voice

[Joshua Colp]

Frank wrote:

Hi ,

So I tried

Answer()
Wait(1)
SendDTMF(1)

But I got an error in the console:

[Jan 22 14:54:13] WARNING[28067]: pbx.c:4458 pbx_extension_helper: No
application 'SendDTMF' for extension (gtalk_incoming, r...@gmail.com, 4)


The app_senddtmf.so module has to be built and loaded. You can load it 
explicitly using "module load app_senddtmf.so". If that fails then it 
was not built and you will have to look into why not.


--
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at:  www.digium.com  & www.asterisk.org

--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
  http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Google voice with no voice

[Frank]

Hi ,

So I tried

Answer()
Wait(1)
SendDTMF(1)

But I got an error in the console:

[Jan 22 14:54:13] WARNING[28067]: pbx.c:4458 pbx_extension_helper: No 
application 'SendDTMF' for extension (gtalk_incoming, r...@gmail.com, 4)



If I do "core show application sendDTMF" , nothing comes up.

If there anything special to compile for this ?


Thanks

On 1/22/13 2:54 PM, Joshua Colp wrote:

Frank wrote:

OK, so here is the new..

By mistake, when I picked up the D70 , I pushed the 2 button.
I suddenly heard google voice saying "Okay, I'll send the caller to
voicemail". So I called again.. picked up.. I could not hear anything on
the D70.. But if I push 1 (which is the google voice option to pickup
the screened call), then the audio path works in both way.

So the real issue is that when google voice talks when I pick up to let
me know who's calling, I can't hear anything, until I press a digit.

If I press 1, I get the call connected.
If I press 2, I can hear google voice.

The question is why can't I hear google voice right away without pushing
a digit ?


This is a Google Voice "thing". Even the Google talk client itself sends
a digit of "1" when you answer the call. That being said you can do this
from inside of Asterisk dialplan with a combination of Answer, Wait, and
SendDTMF(1)



--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
  http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Google voice with no voice

[Joshua Colp]

Frank wrote:

OK, so here is the new..

By mistake, when I picked up the D70 , I pushed the 2 button.
I suddenly heard google voice saying "Okay, I'll send the caller to
voicemail". So I called again.. picked up.. I could not hear anything on
the D70.. But if I push 1 (which is the google voice option to pickup
the screened call), then the audio path works in both way.

So the real issue is that when google voice talks when I pick up to let
me know who's calling, I can't hear anything, until I press a digit.

If I press 1, I get the call connected.
If I press 2, I can hear google voice.

The question is why can't I hear google voice right away without pushing
a digit ?


This is a Google Voice "thing". Even the Google talk client itself sends 
a digit of "1" when you answer the call. That being said you can do this 
from inside of Asterisk dialplan with a combination of Answer, Wait, and 
SendDTMF(1)


--
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at:  www.digium.com  & www.asterisk.org

--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
  http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Google voice with no voice

[Frank]

OK, so here is the new..

By mistake, when I picked up the D70 , I pushed the 2 button.
I suddenly heard google voice saying "Okay, I'll send the caller to 
voicemail". So I called again.. picked up.. I could not hear anything on 
the D70.. But if I push 1 (which is the google voice option to pickup 
the screened call), then the audio path works in both way.


So the real issue is that when google voice talks when I pick up to let 
me know who's calling, I can't hear anything, until I press a digit.


If I press 1, I get the call connected.
If I press 2, I can hear google voice.

The question is why can't I hear google voice right away without pushing 
a digit ?


I tried to go into google voice configuration and remove the call 
screening, but it looks like for calls on gtalk , the screening is 
always active.


So I guess I will know that I need to press 1 or 2 from the D70 for 
everything to work. It slightly sucks, but I'll take it.






On 1/22/13 2:29 PM, Danny Nicholas wrote:

This sounds like a codec issue.  Set your verbose to 10 and retry the
incoming call.

-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 1:26 PM
To: Danny Nicholas
Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Google voice with no voice

That's idle.
If I call from D70 (working scenario) the result of the command is the same.

gtalk show channels shows this when I call from D70 (again, working
scenario):
Channel Jabber ID   Resource
  Read  Write
Gtalk/+1x@voice.googl  +1xx...@voice.google.com   srvres-MTAuMjI3
ulaw  ulaw



When I call google voice, gtalk show channels shows the following:
While ringing:
*CLI> gtalk show channels
Channel Jabber ID   Resource
  Read  Write
Gtalk/+xxx-2c8e +x...@voice.google.com   srvres-MTAuMTIu  ulaw
slin
1 active gtalk channel


Once I pick up
*CLI> -- SIP/D70-0004 answered Gtalk/+xxx-2c8e
gtalk show channels
Channel Jabber ID   Resource
  Read  Write
Gtalk/+xxx-2c8e +x...@voice.google.com   srvres-MTAuMTIu  ulaw
ulaw
1 active gtalk channel


The only difference is the WRITE column that changes from SLIN to ULAW






On 1/22/13 2:22 PM, Danny Nicholas wrote:

This is incoming, outgoing or idle (no call)?


-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 1:21 PM
To: Danny Nicholas
Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Google voice with no voice

*CLI> jabber show connections
Jabber Users and their status:
  [asterisk] r...@gmail.com - Connected

  Number of users: 1


On 1/22/13 2:14 PM, Danny Nicholas wrote:

What about "jabber show channels"?

-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 1:12 PM
To: Danny Nicholas
Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Google voice with no voice

*CLI> core show help gtalk
   gtalk show channels Show GoogleTalk channels *CLI> gtalk
show channels
Channel Jabber ID   Resource
Read  Write
0 active gtalk channels



And that's my jabber.conf
[general]
debug=no
autoprune=no
autoregister=yes
auth_policy=accept

[asterisk]
type=client
serverhost=talk.google.com
username=r...@gmail.com
secret=toor
priority=1
port=5222
usetls=yes
usesasl=yes
status=available
statusmessage="Ohai from Asterisk"
timeout=5

On 1/22/13 2:06 PM, Danny Nicholas wrote:

Does your install have a set of gtalk commands?  GV isn't a SIP call
per se, so the incoming line would be a gtalk peer.  Try these
commands from CLI Gtalk show peers Core help gtalk


-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 1:04 PM
To: Danny Nicholas
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Google voice with no voice

Hi,

No, it's not even connecting.
On the caller side, I do not see anything showing that the called
party picks up.

On the D70 side, when I pick up, I have the counter starting so I can
see the seconds going up, but no audio at all. (and the remote party
still hears ring tone)



On 1/22/13 2:02 PM, Danny Nicholas wrote:

If you needed a MITM, nothing would work now.  The incoming call is
connecting, but no voice or no connection at all?

-Original Message-----
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 11:56 AM
To: Danny Nicholas
Subject: Re: [asterisk-users] Google voice with no voice

I added port 5061 without success.
I am wondering if I used a man in the middle like

Re: [asterisk-users] Google voice with no voice

[Danny Nicholas]

This sounds like a codec issue.  Set your verbose to 10 and retry the
incoming call.

-Original Message-
From: Frank [mailto:fr...@efirehouse.com] 
Sent: Tuesday, January 22, 2013 1:26 PM
To: Danny Nicholas
Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Google voice with no voice

That's idle.
If I call from D70 (working scenario) the result of the command is the same.

gtalk show channels shows this when I call from D70 (again, working 
scenario):
Channel Jabber ID   Resource 
 Read  Write
Gtalk/+1x@voice.googl  +1xx...@voice.google.com   srvres-MTAuMjI3 
ulaw  ulaw



When I call google voice, gtalk show channels shows the following:
While ringing:
*CLI> gtalk show channels
Channel Jabber ID   Resource 
 Read  Write
Gtalk/+xxx-2c8e +x...@voice.google.com   srvres-MTAuMTIu  ulaw 
slin
1 active gtalk channel


Once I pick up
*CLI> -- SIP/D70-0004 answered Gtalk/+xxx-2c8e
gtalk show channels
Channel Jabber ID   Resource 
 Read  Write
Gtalk/+xxx-2c8e +x...@voice.google.com   srvres-MTAuMTIu  ulaw 
ulaw
1 active gtalk channel


The only difference is the WRITE column that changes from SLIN to ULAW






On 1/22/13 2:22 PM, Danny Nicholas wrote:
> This is incoming, outgoing or idle (no call)?
>
>
> -Original Message-
> From: Frank [mailto:fr...@efirehouse.com]
> Sent: Tuesday, January 22, 2013 1:21 PM
> To: Danny Nicholas
> Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: Re: [asterisk-users] Google voice with no voice
>
> *CLI> jabber show connections
> Jabber Users and their status:
>  [asterisk] r...@gmail.com - Connected
> 
>  Number of users: 1
>
>
> On 1/22/13 2:14 PM, Danny Nicholas wrote:
>> What about "jabber show channels"?
>>
>> -Original Message-
>> From: Frank [mailto:fr...@efirehouse.com]
>> Sent: Tuesday, January 22, 2013 1:12 PM
>> To: Danny Nicholas
>> Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
>> Subject: Re: [asterisk-users] Google voice with no voice
>>
>> *CLI> core show help gtalk
>>   gtalk show channels Show GoogleTalk channels *CLI> gtalk
>> show channels
>> Channel Jabber ID   Resource
>>Read  Write
>> 0 active gtalk channels
>>
>>
>>
>> And that's my jabber.conf
>> [general]
>> debug=no
>> autoprune=no
>> autoregister=yes
>> auth_policy=accept
>>
>> [asterisk]
>> type=client
>> serverhost=talk.google.com
>> username=r...@gmail.com
>> secret=toor
>> priority=1
>> port=5222
>> usetls=yes
>> usesasl=yes
>> status=available
>> statusmessage="Ohai from Asterisk"
>> timeout=5
>>
>> On 1/22/13 2:06 PM, Danny Nicholas wrote:
>>> Does your install have a set of gtalk commands?  GV isn't a SIP call
>>> per se, so the incoming line would be a gtalk peer.  Try these
>>> commands from CLI Gtalk show peers Core help gtalk
>>>
>>>
>>> -Original Message-
>>> From: Frank [mailto:fr...@efirehouse.com]
>>> Sent: Tuesday, January 22, 2013 1:04 PM
>>> To: Danny Nicholas
>>> Cc: Asterisk Users Mailing List - Non-Commercial Discussion
>>> Subject: Re: [asterisk-users] Google voice with no voice
>>>
>>> Hi,
>>>
>>> No, it's not even connecting.
>>> On the caller side, I do not see anything showing that the called
>>> party picks up.
>>>
>>> On the D70 side, when I pick up, I have the counter starting so I can
>>> see the seconds going up, but no audio at all. (and the remote party
>>> still hears ring tone)
>>>
>>>
>>>
>>> On 1/22/13 2:02 PM, Danny Nicholas wrote:
>>>> If you needed a MITM, nothing would work now.  The incoming call is
>>>> connecting, but no voice or no connection at all?
>>>>
>>>> -Original Message-
>>>> From: Frank [mailto:fr...@efirehouse.com]
>>>> Sent: Tuesday, January 22, 2013 11:56 AM
>>>> To: Danny Nicholas
>>>> Subject: Re: [asterisk-users] Google voice with no voice
>>>>
>>>> I added port 5061 without success.
>>>> I am wondering if I used a man in the middle like iptel.org service,
>>>> it would work  ?
>>>>
>>>> On 1/22/13 12:00 PM,

Re: [asterisk-users] Google voice with no voice

[Frank]

That's idle.
If I call from D70 (working scenario) the result of the command is the same.

gtalk show channels shows this when I call from D70 (again, working 
scenario):
Channel Jabber ID   Resource 
Read  Write
Gtalk/+1x@voice.googl  +1xx...@voice.google.com   srvres-MTAuMjI3 
ulaw  ulaw




When I call google voice, gtalk show channels shows the following:
While ringing:
*CLI> gtalk show channels
Channel Jabber ID   Resource 
Read  Write
Gtalk/+xxx-2c8e +x...@voice.google.com   srvres-MTAuMTIu  ulaw 
slin

1 active gtalk channel


Once I pick up
*CLI> -- SIP/D70-0004 answered Gtalk/+xxx-2c8e
gtalk show channels
Channel Jabber ID   Resource 
Read  Write
Gtalk/+xxx-2c8e +x...@voice.google.com   srvres-MTAuMTIu  ulaw 
ulaw

1 active gtalk channel


The only difference is the WRITE column that changes from SLIN to ULAW






On 1/22/13 2:22 PM, Danny Nicholas wrote:

This is incoming, outgoing or idle (no call)?


-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 1:21 PM
To: Danny Nicholas
Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Google voice with no voice

*CLI> jabber show connections
Jabber Users and their status:
 [asterisk] r...@gmail.com - Connected

 Number of users: 1


On 1/22/13 2:14 PM, Danny Nicholas wrote:

What about "jabber show channels"?

-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 1:12 PM
To: Danny Nicholas
Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Google voice with no voice

*CLI> core show help gtalk
  gtalk show channels Show GoogleTalk channels *CLI> gtalk
show channels
Channel Jabber ID   Resource
   Read  Write
0 active gtalk channels



And that's my jabber.conf
[general]
debug=no
autoprune=no
autoregister=yes
auth_policy=accept

[asterisk]
type=client
serverhost=talk.google.com
username=r...@gmail.com
secret=toor
priority=1
port=5222
usetls=yes
usesasl=yes
status=available
statusmessage="Ohai from Asterisk"
timeout=5

On 1/22/13 2:06 PM, Danny Nicholas wrote:

Does your install have a set of gtalk commands?  GV isn't a SIP call
per se, so the incoming line would be a gtalk peer.  Try these
commands from CLI Gtalk show peers Core help gtalk


-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 1:04 PM
To: Danny Nicholas
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Google voice with no voice

Hi,

No, it's not even connecting.
On the caller side, I do not see anything showing that the called
party picks up.

On the D70 side, when I pick up, I have the counter starting so I can
see the seconds going up, but no audio at all. (and the remote party
still hears ring tone)



On 1/22/13 2:02 PM, Danny Nicholas wrote:

If you needed a MITM, nothing would work now.  The incoming call is
connecting, but no voice or no connection at all?

-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 11:56 AM
To: Danny Nicholas
Subject: Re: [asterisk-users] Google voice with no voice

I added port 5061 without success.
I am wondering if I used a man in the middle like iptel.org service,
it would work  ?

On 1/22/13 12:00 PM, Danny Nicholas wrote:

Each asterisk call uses 3 ports;  5060 is used to initiate the
connection
(5222 for chan_motif/google voice), then 2 consecutive ports from
the
10001-2 range are used for voice.  Since GV uses TLS, I'm
wondering if
5061 also comes into play.  I assume you started from this link:
https://wiki.asterisk.org/wiki/display/AST/Calling+using+Google


-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 10:51 AM
To: Danny Nicholas
Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Google voice with no voice

Danny,

I tried netstat -anp on a working outgoing call, and non working
incomgin, and I see that the working has "CONNECTED" status, while
the other one has nothing like that at all. Any other idea ?

Thanks



On 1/22/13 11:36 AM, Danny Nicholas wrote:

Do a "netstat -anp" during the call.  This will (hopefully) show
you where the out of range condition is occurring.

-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 10:33 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Cc: Danny Nicholas
Subject: Re: [asterisk-users] Google voice with no voice

Danny,

Thanks for the trick, that made al

Re: [asterisk-users] Google voice with no voice

[Danny Nicholas]

This is incoming, outgoing or idle (no call)?


-Original Message-
From: Frank [mailto:fr...@efirehouse.com] 
Sent: Tuesday, January 22, 2013 1:21 PM
To: Danny Nicholas
Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Google voice with no voice

*CLI> jabber show connections
Jabber Users and their status:
[asterisk] r...@gmail.com - Connected

Number of users: 1


On 1/22/13 2:14 PM, Danny Nicholas wrote:
> What about "jabber show channels"?
>
> -Original Message-
> From: Frank [mailto:fr...@efirehouse.com]
> Sent: Tuesday, January 22, 2013 1:12 PM
> To: Danny Nicholas
> Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: Re: [asterisk-users] Google voice with no voice
>
> *CLI> core show help gtalk
>  gtalk show channels Show GoogleTalk channels *CLI> gtalk 
> show channels
> Channel Jabber ID   Resource
>   Read  Write
> 0 active gtalk channels
>
>
>
> And that's my jabber.conf
> [general]
> debug=no
> autoprune=no
> autoregister=yes
> auth_policy=accept
>
> [asterisk]
> type=client
> serverhost=talk.google.com
> username=r...@gmail.com
> secret=toor
> priority=1
> port=5222
> usetls=yes
> usesasl=yes
> status=available
> statusmessage="Ohai from Asterisk"
> timeout=5
>
> On 1/22/13 2:06 PM, Danny Nicholas wrote:
>> Does your install have a set of gtalk commands?  GV isn't a SIP call 
>> per se, so the incoming line would be a gtalk peer.  Try these 
>> commands from CLI Gtalk show peers Core help gtalk
>>
>>
>> -Original Message-
>> From: Frank [mailto:fr...@efirehouse.com]
>> Sent: Tuesday, January 22, 2013 1:04 PM
>> To: Danny Nicholas
>> Cc: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [asterisk-users] Google voice with no voice
>>
>> Hi,
>>
>> No, it's not even connecting.
>> On the caller side, I do not see anything showing that the called 
>> party picks up.
>>
>> On the D70 side, when I pick up, I have the counter starting so I can 
>> see the seconds going up, but no audio at all. (and the remote party 
>> still hears ring tone)
>>
>>
>>
>> On 1/22/13 2:02 PM, Danny Nicholas wrote:
>>> If you needed a MITM, nothing would work now.  The incoming call is 
>>> connecting, but no voice or no connection at all?
>>>
>>> -Original Message-
>>> From: Frank [mailto:fr...@efirehouse.com]
>>> Sent: Tuesday, January 22, 2013 11:56 AM
>>> To: Danny Nicholas
>>> Subject: Re: [asterisk-users] Google voice with no voice
>>>
>>> I added port 5061 without success.
>>> I am wondering if I used a man in the middle like iptel.org service, 
>>> it would work  ?
>>>
>>> On 1/22/13 12:00 PM, Danny Nicholas wrote:
>>>> Each asterisk call uses 3 ports;  5060 is used to initiate the 
>>>> connection
>>>> (5222 for chan_motif/google voice), then 2 consecutive ports from 
>>>> the
>>>> 10001-2 range are used for voice.  Since GV uses TLS, I'm 
>>>> wondering if
>>>> 5061 also comes into play.  I assume you started from this link:
>>>> https://wiki.asterisk.org/wiki/display/AST/Calling+using+Google
>>>>
>>>>
>>>> -Original Message-
>>>> From: Frank [mailto:fr...@efirehouse.com]
>>>> Sent: Tuesday, January 22, 2013 10:51 AM
>>>> To: Danny Nicholas
>>>> Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
>>>> Subject: Re: [asterisk-users] Google voice with no voice
>>>>
>>>> Danny,
>>>>
>>>> I tried netstat -anp on a working outgoing call, and non working 
>>>> incomgin, and I see that the working has "CONNECTED" status, while 
>>>> the other one has nothing like that at all. Any other idea ?
>>>>
>>>> Thanks
>>>>
>>>>
>>>>
>>>> On 1/22/13 11:36 AM, Danny Nicholas wrote:
>>>>> Do a "netstat -anp" during the call.  This will (hopefully) show 
>>>>> you where the out of range condition is occurring.
>>>>>
>>>>> -Original Message-
>>>>> From: Frank [mailto:fr...@efirehouse.com]
>>>>> Sent: Tuesday, January 22, 2013 10:33 AM
>>>>> To: Asterisk Users Mailing List - Non-Commercial D

Re: [asterisk-users] Google voice with no voice

[Frank]

*CLI> jabber show connections
Jabber Users and their status:
   [asterisk] r...@gmail.com - Connected

   Number of users: 1


On 1/22/13 2:14 PM, Danny Nicholas wrote:

What about "jabber show channels"?

-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 1:12 PM
To: Danny Nicholas
Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Google voice with no voice

*CLI> core show help gtalk
 gtalk show channels Show GoogleTalk channels *CLI> gtalk show
channels
Channel Jabber ID   Resource
  Read  Write
0 active gtalk channels



And that's my jabber.conf
[general]
debug=no
autoprune=no
autoregister=yes
auth_policy=accept

[asterisk]
type=client
serverhost=talk.google.com
username=r...@gmail.com
secret=toor
priority=1
port=5222
usetls=yes
usesasl=yes
status=available
statusmessage="Ohai from Asterisk"
timeout=5

On 1/22/13 2:06 PM, Danny Nicholas wrote:

Does your install have a set of gtalk commands?  GV isn't a SIP call
per se, so the incoming line would be a gtalk peer.  Try these
commands from CLI Gtalk show peers Core help gtalk


-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 1:04 PM
To: Danny Nicholas
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Google voice with no voice

Hi,

No, it's not even connecting.
On the caller side, I do not see anything showing that the called
party picks up.

On the D70 side, when I pick up, I have the counter starting so I can
see the seconds going up, but no audio at all. (and the remote party
still hears ring tone)



On 1/22/13 2:02 PM, Danny Nicholas wrote:

If you needed a MITM, nothing would work now.  The incoming call is
connecting, but no voice or no connection at all?

-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 11:56 AM
To: Danny Nicholas
Subject: Re: [asterisk-users] Google voice with no voice

I added port 5061 without success.
I am wondering if I used a man in the middle like iptel.org service,
it would work  ?

On 1/22/13 12:00 PM, Danny Nicholas wrote:

Each asterisk call uses 3 ports;  5060 is used to initiate the
connection
(5222 for chan_motif/google voice), then 2 consecutive ports from
the
10001-2 range are used for voice.  Since GV uses TLS, I'm
wondering if
5061 also comes into play.  I assume you started from this link:
https://wiki.asterisk.org/wiki/display/AST/Calling+using+Google


-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 10:51 AM
To: Danny Nicholas
Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Google voice with no voice

Danny,

I tried netstat -anp on a working outgoing call, and non working
incomgin, and I see that the working has "CONNECTED" status, while
the other one has nothing like that at all. Any other idea ?

Thanks



On 1/22/13 11:36 AM, Danny Nicholas wrote:

Do a "netstat -anp" during the call.  This will (hopefully) show
you where the out of range condition is occurring.

-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 10:33 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Cc: Danny Nicholas
Subject: Re: [asterisk-users] Google voice with no voice

Danny,

Thanks for the trick, that made all outgoing calls working.
Now, the issue is with incoming calls. Even if I turn off all other
phones in google voice configuration and have the calls routed to
my Google Chat only, this is what happens:

The Asterisk receives the call.
The D70 rings.
If I pick up, nothing happens (I see on the D70 display that I
picked
up) The caller still hear the ringing tone

THat's what I see on the console:

*CLI> -- Executing [r...@gmail.com@gtalk_incoming:1]
Verbose("Gtalk/+1xx-2310", "0, Incoming gtalk from
"+1xxx...@voice.google.com/srvres-MTAuMTIuMTU1LjE1Ojk4MjU="
<>") in new stack
   Incoming gtalk from
"+xxx...@voice.google.com/srvres-MTAuMTIuMTU1LjE1Ojk4MjU=" <>
  -- Executing [r...@gmail.com@gtalk_incoming:2]
Answer("Gtalk/+xx-2310", "") in new stack
  -- Executing [r...@gmail.com@gtalk_incoming:3]
Wait("Gtalk/+xx-2310", "2") in new stack
  -- Executing [r...@gmail.com@gtalk_incoming:4]
Dial("Gtalk/+xx-2310", "SIP/D70") in new stack
== Using SIP RTP CoS mark 5
  -- Called SIP/D70

*CLI>
*CLI> -- SIP/D70-0006 is ringing

*CLI> -- SIP/D70-0006 answered Gtalk/+xx-2310
== Spawn extension (gtalk_incoming, r...@gmail.com, 4)
exi

Re: [asterisk-users] Google voice with no voice

[Danny Nicholas]

What about "jabber show channels"?

-Original Message-
From: Frank [mailto:fr...@efirehouse.com] 
Sent: Tuesday, January 22, 2013 1:12 PM
To: Danny Nicholas
Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Google voice with no voice

*CLI> core show help gtalk
gtalk show channels Show GoogleTalk channels *CLI> gtalk show
channels
Channel Jabber ID   Resource 
 Read  Write
0 active gtalk channels



And that's my jabber.conf
[general]
debug=no
autoprune=no
autoregister=yes
auth_policy=accept

[asterisk]
type=client
serverhost=talk.google.com
username=r...@gmail.com
secret=toor
priority=1
port=5222
usetls=yes
usesasl=yes
status=available
statusmessage="Ohai from Asterisk"
timeout=5

On 1/22/13 2:06 PM, Danny Nicholas wrote:
> Does your install have a set of gtalk commands?  GV isn't a SIP call 
> per se, so the incoming line would be a gtalk peer.  Try these 
> commands from CLI Gtalk show peers Core help gtalk
>
>
> -Original Message-
> From: Frank [mailto:fr...@efirehouse.com]
> Sent: Tuesday, January 22, 2013 1:04 PM
> To: Danny Nicholas
> Cc: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Google voice with no voice
>
> Hi,
>
> No, it's not even connecting.
> On the caller side, I do not see anything showing that the called 
> party picks up.
>
> On the D70 side, when I pick up, I have the counter starting so I can 
> see the seconds going up, but no audio at all. (and the remote party 
> still hears ring tone)
>
>
>
> On 1/22/13 2:02 PM, Danny Nicholas wrote:
>> If you needed a MITM, nothing would work now.  The incoming call is 
>> connecting, but no voice or no connection at all?
>>
>> -Original Message-
>> From: Frank [mailto:fr...@efirehouse.com]
>> Sent: Tuesday, January 22, 2013 11:56 AM
>> To: Danny Nicholas
>> Subject: Re: [asterisk-users] Google voice with no voice
>>
>> I added port 5061 without success.
>> I am wondering if I used a man in the middle like iptel.org service, 
>> it would work  ?
>>
>> On 1/22/13 12:00 PM, Danny Nicholas wrote:
>>> Each asterisk call uses 3 ports;  5060 is used to initiate the 
>>> connection
>>> (5222 for chan_motif/google voice), then 2 consecutive ports from 
>>> the
>>> 10001-2 range are used for voice.  Since GV uses TLS, I'm 
>>> wondering if
>>> 5061 also comes into play.  I assume you started from this link:
>>> https://wiki.asterisk.org/wiki/display/AST/Calling+using+Google
>>>
>>>
>>> -Original Message-
>>> From: Frank [mailto:fr...@efirehouse.com]
>>> Sent: Tuesday, January 22, 2013 10:51 AM
>>> To: Danny Nicholas
>>> Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
>>> Subject: Re: [asterisk-users] Google voice with no voice
>>>
>>> Danny,
>>>
>>> I tried netstat -anp on a working outgoing call, and non working 
>>> incomgin, and I see that the working has "CONNECTED" status, while 
>>> the other one has nothing like that at all. Any other idea ?
>>>
>>> Thanks
>>>
>>>
>>>
>>> On 1/22/13 11:36 AM, Danny Nicholas wrote:
>>>> Do a "netstat -anp" during the call.  This will (hopefully) show 
>>>> you where the out of range condition is occurring.
>>>>
>>>> -Original Message-
>>>> From: Frank [mailto:fr...@efirehouse.com]
>>>> Sent: Tuesday, January 22, 2013 10:33 AM
>>>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>>>> Cc: Danny Nicholas
>>>> Subject: Re: [asterisk-users] Google voice with no voice
>>>>
>>>> Danny,
>>>>
>>>> Thanks for the trick, that made all outgoing calls working.
>>>> Now, the issue is with incoming calls. Even if I turn off all other 
>>>> phones in google voice configuration and have the calls routed to 
>>>> my Google Chat only, this is what happens:
>>>>
>>>> The Asterisk receives the call.
>>>> The D70 rings.
>>>> If I pick up, nothing happens (I see on the D70 display that I 
>>>> picked
>>>> up) The caller still hear the ringing tone
>>>>
>>>> THat's what I see on the console:
>>>>
>>>> *CLI> -- Executing [r...@gmail.com@gtalk_incoming:1]
>>>> Verbose("Gtalk/+1xx-231

Re: [asterisk-users] Google voice with no voice

[Frank]

*CLI> core show help gtalk
   gtalk show channels Show GoogleTalk channels
*CLI> gtalk show channels
Channel Jabber ID   Resource 
Read  Write

0 active gtalk channels



And that's my jabber.conf
[general]
debug=no
autoprune=no
autoregister=yes
auth_policy=accept

[asterisk]
type=client
serverhost=talk.google.com
username=r...@gmail.com
secret=toor
priority=1
port=5222
usetls=yes
usesasl=yes
status=available
statusmessage="Ohai from Asterisk"
timeout=5

On 1/22/13 2:06 PM, Danny Nicholas wrote:

Does your install have a set of gtalk commands?  GV isn't a SIP call per se,
so the incoming line would be a gtalk peer.  Try these commands from CLI
Gtalk show peers
Core help gtalk


-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 1:04 PM
To: Danny Nicholas
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Google voice with no voice

Hi,

No, it's not even connecting.
On the caller side, I do not see anything showing that the called party
picks up.

On the D70 side, when I pick up, I have the counter starting so I can see
the seconds going up, but no audio at all. (and the remote party still hears
ring tone)



On 1/22/13 2:02 PM, Danny Nicholas wrote:

If you needed a MITM, nothing would work now.  The incoming call is
connecting, but no voice or no connection at all?

-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 11:56 AM
To: Danny Nicholas
Subject: Re: [asterisk-users] Google voice with no voice

I added port 5061 without success.
I am wondering if I used a man in the middle like iptel.org service,
it would work  ?

On 1/22/13 12:00 PM, Danny Nicholas wrote:

Each asterisk call uses 3 ports;  5060 is used to initiate the
connection
(5222 for chan_motif/google voice), then 2 consecutive ports from the
10001-2 range are used for voice.  Since GV uses TLS, I'm
wondering if
5061 also comes into play.  I assume you started from this link:
https://wiki.asterisk.org/wiki/display/AST/Calling+using+Google


-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 10:51 AM
To: Danny Nicholas
Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Google voice with no voice

Danny,

I tried netstat -anp on a working outgoing call, and non working
incomgin, and I see that the working has "CONNECTED" status, while
the other one has nothing like that at all. Any other idea ?

Thanks



On 1/22/13 11:36 AM, Danny Nicholas wrote:

Do a "netstat -anp" during the call.  This will (hopefully) show you
where the out of range condition is occurring.

-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 10:33 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Cc: Danny Nicholas
Subject: Re: [asterisk-users] Google voice with no voice

Danny,

Thanks for the trick, that made all outgoing calls working.
Now, the issue is with incoming calls. Even if I turn off all other
phones in google voice configuration and have the calls routed to my
Google Chat only, this is what happens:

The Asterisk receives the call.
The D70 rings.
If I pick up, nothing happens (I see on the D70 display that I
picked
up) The caller still hear the ringing tone

THat's what I see on the console:

*CLI> -- Executing [r...@gmail.com@gtalk_incoming:1]
Verbose("Gtalk/+1xx-2310", "0, Incoming gtalk from
"+1xxx...@voice.google.com/srvres-MTAuMTIuMTU1LjE1Ojk4MjU=" <>")
in new stack
  Incoming gtalk from
"+xxx...@voice.google.com/srvres-MTAuMTIuMTU1LjE1Ojk4MjU=" <>
 -- Executing [r...@gmail.com@gtalk_incoming:2]
Answer("Gtalk/+xx-2310", "") in new stack
 -- Executing [r...@gmail.com@gtalk_incoming:3]
Wait("Gtalk/+xx-2310", "2") in new stack
 -- Executing [r...@gmail.com@gtalk_incoming:4]
Dial("Gtalk/+xx-2310", "SIP/D70") in new stack
   == Using SIP RTP CoS mark 5
 -- Called SIP/D70

*CLI>
*CLI> -- SIP/D70-0006 is ringing

*CLI> -- SIP/D70-0006 answered Gtalk/+xx-2310
   == Spawn extension (gtalk_incoming, r...@gmail.com, 4) exited
non-zero on 'Gtalk/+xx-2310'






On 1/22/13 11:21 AM, Danny Nicholas wrote:

You are obviously getting the call connected, so the subnet issue
is

moot.

What this sounds like (pardon the pun) to me is an rtp skip issue.
The "working" calls are generating rtp connections in the allowed
range; the other calls have one or more ports outside of your rtp
range.  Verify that all of your ports defined in rtp.conf
(1-2 by default) are open in the firewall.

--

Re: [asterisk-users] Google voice with no voice

[Danny Nicholas]

Does your install have a set of gtalk commands?  GV isn't a SIP call per se,
so the incoming line would be a gtalk peer.  Try these commands from CLI
Gtalk show peers
Core help gtalk


-Original Message-
From: Frank [mailto:fr...@efirehouse.com] 
Sent: Tuesday, January 22, 2013 1:04 PM
To: Danny Nicholas
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Google voice with no voice

Hi,

No, it's not even connecting.
On the caller side, I do not see anything showing that the called party
picks up.

On the D70 side, when I pick up, I have the counter starting so I can see
the seconds going up, but no audio at all. (and the remote party still hears
ring tone)



On 1/22/13 2:02 PM, Danny Nicholas wrote:
> If you needed a MITM, nothing would work now.  The incoming call is 
> connecting, but no voice or no connection at all?
>
> -Original Message-
> From: Frank [mailto:fr...@efirehouse.com]
> Sent: Tuesday, January 22, 2013 11:56 AM
> To: Danny Nicholas
> Subject: Re: [asterisk-users] Google voice with no voice
>
> I added port 5061 without success.
> I am wondering if I used a man in the middle like iptel.org service, 
> it would work  ?
>
> On 1/22/13 12:00 PM, Danny Nicholas wrote:
>> Each asterisk call uses 3 ports;  5060 is used to initiate the 
>> connection
>> (5222 for chan_motif/google voice), then 2 consecutive ports from the
>> 10001-2 range are used for voice.  Since GV uses TLS, I'm 
>> wondering if
>> 5061 also comes into play.  I assume you started from this link:
>> https://wiki.asterisk.org/wiki/display/AST/Calling+using+Google
>>
>>
>> -Original Message-
>> From: Frank [mailto:fr...@efirehouse.com]
>> Sent: Tuesday, January 22, 2013 10:51 AM
>> To: Danny Nicholas
>> Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
>> Subject: Re: [asterisk-users] Google voice with no voice
>>
>> Danny,
>>
>> I tried netstat -anp on a working outgoing call, and non working 
>> incomgin, and I see that the working has "CONNECTED" status, while 
>> the other one has nothing like that at all. Any other idea ?
>>
>> Thanks
>>
>>
>>
>> On 1/22/13 11:36 AM, Danny Nicholas wrote:
>>> Do a "netstat -anp" during the call.  This will (hopefully) show you 
>>> where the out of range condition is occurring.
>>>
>>> -Original Message-
>>> From: Frank [mailto:fr...@efirehouse.com]
>>> Sent: Tuesday, January 22, 2013 10:33 AM
>>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>>> Cc: Danny Nicholas
>>> Subject: Re: [asterisk-users] Google voice with no voice
>>>
>>> Danny,
>>>
>>> Thanks for the trick, that made all outgoing calls working.
>>> Now, the issue is with incoming calls. Even if I turn off all other 
>>> phones in google voice configuration and have the calls routed to my 
>>> Google Chat only, this is what happens:
>>>
>>> The Asterisk receives the call.
>>> The D70 rings.
>>> If I pick up, nothing happens (I see on the D70 display that I 
>>> picked
>>> up) The caller still hear the ringing tone
>>>
>>> THat's what I see on the console:
>>>
>>> *CLI> -- Executing [r...@gmail.com@gtalk_incoming:1]
>>> Verbose("Gtalk/+1xx-2310", "0, Incoming gtalk from 
>>> "+1xxx...@voice.google.com/srvres-MTAuMTIuMTU1LjE1Ojk4MjU=" <>") 
>>> in new stack
>>>  Incoming gtalk from
>>> "+xxx...@voice.google.com/srvres-MTAuMTIuMTU1LjE1Ojk4MjU=" <>
>>> -- Executing [r...@gmail.com@gtalk_incoming:2] 
>>> Answer("Gtalk/+xx-2310", "") in new stack
>>> -- Executing [r...@gmail.com@gtalk_incoming:3] 
>>> Wait("Gtalk/+xx-2310", "2") in new stack
>>> -- Executing [r...@gmail.com@gtalk_incoming:4] 
>>> Dial("Gtalk/+xx-2310", "SIP/D70") in new stack
>>>   == Using SIP RTP CoS mark 5
>>> -- Called SIP/D70
>>>
>>> *CLI>
>>> *CLI> -- SIP/D70-0006 is ringing
>>>
>>> *CLI> -- SIP/D70-0006 answered Gtalk/+xx-2310
>>>   == Spawn extension (gtalk_incoming, r...@gmail.com, 4) exited 
>>> non-zero on 'Gtalk/+xx-2310'
>>>
>>>
>>>
>>>
>>>
>>>
>>> On 1/22/13 11:21 AM, Danny Nicholas wro

Re: [asterisk-users] Google voice with no voice

[Frank]

Hi,

No, it's not even connecting.
On the caller side, I do not see anything showing that the called party 
picks up.


On the D70 side, when I pick up, I have the counter starting so I can 
see the seconds going up, but no audio at all. (and the remote party 
still hears ring tone)




On 1/22/13 2:02 PM, Danny Nicholas wrote:

If you needed a MITM, nothing would work now.  The incoming call is
connecting, but no voice or no connection at all?

-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 11:56 AM
To: Danny Nicholas
Subject: Re: [asterisk-users] Google voice with no voice

I added port 5061 without success.
I am wondering if I used a man in the middle like iptel.org service, it
would work  ?

On 1/22/13 12:00 PM, Danny Nicholas wrote:

Each asterisk call uses 3 ports;  5060 is used to initiate the
connection
(5222 for chan_motif/google voice), then 2 consecutive ports from the
10001-2 range are used for voice.  Since GV uses TLS, I'm
wondering if
5061 also comes into play.  I assume you started from this link:
https://wiki.asterisk.org/wiki/display/AST/Calling+using+Google


-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 10:51 AM
To: Danny Nicholas
Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Google voice with no voice

Danny,

I tried netstat -anp on a working outgoing call, and non working
incomgin, and I see that the working has "CONNECTED" status, while the
other one has nothing like that at all. Any other idea ?

Thanks



On 1/22/13 11:36 AM, Danny Nicholas wrote:

Do a "netstat -anp" during the call.  This will (hopefully) show you
where the out of range condition is occurring.

-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 10:33 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Cc: Danny Nicholas
Subject: Re: [asterisk-users] Google voice with no voice

Danny,

Thanks for the trick, that made all outgoing calls working.
Now, the issue is with incoming calls. Even if I turn off all other
phones in google voice configuration and have the calls routed to my
Google Chat only, this is what happens:

The Asterisk receives the call.
The D70 rings.
If I pick up, nothing happens (I see on the D70 display that I picked
up) The caller still hear the ringing tone

THat's what I see on the console:

*CLI> -- Executing [r...@gmail.com@gtalk_incoming:1]
Verbose("Gtalk/+1xx-2310", "0, Incoming gtalk from
"+1xxx...@voice.google.com/srvres-MTAuMTIuMTU1LjE1Ojk4MjU=" <>")
in new stack
 Incoming gtalk from
"+xxx...@voice.google.com/srvres-MTAuMTIuMTU1LjE1Ojk4MjU=" <>
-- Executing [r...@gmail.com@gtalk_incoming:2]
Answer("Gtalk/+xx-2310", "") in new stack
-- Executing [r...@gmail.com@gtalk_incoming:3]
Wait("Gtalk/+xx-2310", "2") in new stack
-- Executing [r...@gmail.com@gtalk_incoming:4]
Dial("Gtalk/+xx-2310", "SIP/D70") in new stack
  == Using SIP RTP CoS mark 5
-- Called SIP/D70

*CLI>
*CLI> -- SIP/D70-0006 is ringing

*CLI> -- SIP/D70-0006 answered Gtalk/+xx-2310
  == Spawn extension (gtalk_incoming, r...@gmail.com, 4) exited
non-zero on 'Gtalk/+xx-2310'






On 1/22/13 11:21 AM, Danny Nicholas wrote:

You are obviously getting the call connected, so the subnet issue is

moot.

What this sounds like (pardon the pun) to me is an rtp skip issue.
The "working" calls are generating rtp connections in the allowed
range; the other calls have one or more ports outside of your rtp
range.  Verify that all of your ports defined in rtp.conf
(1-2 by default) are open in the firewall.

-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Frank
Sent: Tuesday, January 22, 2013 10:18 AM
To: ch...@acsdi.com; Asterisk Users Mailing List - Non-Commercial

Discussion

Subject: Re: [asterisk-users] Google voice with no voice

Chris,

I covered the whole 74.125.225.* subnet.
Even if I open the ports mentioned below for all (not limited to IP
addresses) I still have the same issue.

Have anyone ever succeeded in such configuration? :

Digium phones on 2 different private networks (2 different
buildings) Asterisk server in the internet with a public IP Use
Google Voice

Even if you have asterisk on a private network, but have the same
kind of solution working for you, I'd love to hear your story..





On 1/22/13 9:55 AM, Christopher Harrington wrote:

On Mon, Jan 21, 2013 at 9:59 PM, Frank mailto:fr...@efirehouse.com>> wrote:

Actually, the funny thing is that it works randomly.


This may be 

Re: [asterisk-users] Google voice with no voice

[Danny Nicholas]

If you needed a MITM, nothing would work now.  The incoming call is
connecting, but no voice or no connection at all?

-Original Message-
From: Frank [mailto:fr...@efirehouse.com] 
Sent: Tuesday, January 22, 2013 11:56 AM
To: Danny Nicholas
Subject: Re: [asterisk-users] Google voice with no voice

I added port 5061 without success.
I am wondering if I used a man in the middle like iptel.org service, it
would work  ?

On 1/22/13 12:00 PM, Danny Nicholas wrote:
> Each asterisk call uses 3 ports;  5060 is used to initiate the 
> connection
> (5222 for chan_motif/google voice), then 2 consecutive ports from the
> 10001-2 range are used for voice.  Since GV uses TLS, I'm 
> wondering if
> 5061 also comes into play.  I assume you started from this link:
> https://wiki.asterisk.org/wiki/display/AST/Calling+using+Google
>
>
> -Original Message-
> From: Frank [mailto:fr...@efirehouse.com]
> Sent: Tuesday, January 22, 2013 10:51 AM
> To: Danny Nicholas
> Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: Re: [asterisk-users] Google voice with no voice
>
> Danny,
>
> I tried netstat -anp on a working outgoing call, and non working 
> incomgin, and I see that the working has "CONNECTED" status, while the 
> other one has nothing like that at all. Any other idea ?
>
> Thanks
>
>
>
> On 1/22/13 11:36 AM, Danny Nicholas wrote:
>> Do a "netstat -anp" during the call.  This will (hopefully) show you 
>> where the out of range condition is occurring.
>>
>> -Original Message-
>> From: Frank [mailto:fr...@efirehouse.com]
>> Sent: Tuesday, January 22, 2013 10:33 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Cc: Danny Nicholas
>> Subject: Re: [asterisk-users] Google voice with no voice
>>
>> Danny,
>>
>> Thanks for the trick, that made all outgoing calls working.
>> Now, the issue is with incoming calls. Even if I turn off all other 
>> phones in google voice configuration and have the calls routed to my 
>> Google Chat only, this is what happens:
>>
>> The Asterisk receives the call.
>> The D70 rings.
>> If I pick up, nothing happens (I see on the D70 display that I picked
>> up) The caller still hear the ringing tone
>>
>> THat's what I see on the console:
>>
>> *CLI> -- Executing [r...@gmail.com@gtalk_incoming:1]
>> Verbose("Gtalk/+1xx-2310", "0, Incoming gtalk from 
>> "+1xxx...@voice.google.com/srvres-MTAuMTIuMTU1LjE1Ojk4MjU=" <>") 
>> in new stack
>> Incoming gtalk from
>> "+xxx...@voice.google.com/srvres-MTAuMTIuMTU1LjE1Ojk4MjU=" <>
>>-- Executing [r...@gmail.com@gtalk_incoming:2] 
>> Answer("Gtalk/+xx-2310", "") in new stack
>>-- Executing [r...@gmail.com@gtalk_incoming:3] 
>> Wait("Gtalk/+xx-2310", "2") in new stack
>>-- Executing [r...@gmail.com@gtalk_incoming:4] 
>> Dial("Gtalk/+xx-2310", "SIP/D70") in new stack
>>  == Using SIP RTP CoS mark 5
>>-- Called SIP/D70
>>
>> *CLI>
>> *CLI> -- SIP/D70-0006 is ringing
>>
>> *CLI> -- SIP/D70-0006 answered Gtalk/+xx-2310
>>  == Spawn extension (gtalk_incoming, r...@gmail.com, 4) exited 
>> non-zero on 'Gtalk/+xx-2310'
>>
>>
>>
>>
>>
>>
>> On 1/22/13 11:21 AM, Danny Nicholas wrote:
>>> You are obviously getting the call connected, so the subnet issue is
> moot.
>>> What this sounds like (pardon the pun) to me is an rtp skip issue.
>>> The "working" calls are generating rtp connections in the allowed 
>>> range; the other calls have one or more ports outside of your rtp 
>>> range.  Verify that all of your ports defined in rtp.conf
>>> (1-2 by default) are open in the firewall.
>>>
>>> -Original Message-
>>> From: asterisk-users-boun...@lists.digium.com
>>> [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Frank
>>> Sent: Tuesday, January 22, 2013 10:18 AM
>>> To: ch...@acsdi.com; Asterisk Users Mailing List - Non-Commercial
>> Discussion
>>> Subject: Re: [asterisk-users] Google voice with no voice
>>>
>>> Chris,
>>>
>>> I covered the whole 74.125.225.* subnet.
>>> Even if I open the ports mentioned below for all (not limited to IP
>>> addresses) I still have the same issue.
>>>
>>> Have anyone ever 

Re: [asterisk-users] Google voice with no voice

[Danny Nicholas]

Each asterisk call uses 3 ports;  5060 is used to initiate the connection
(5222 for chan_motif/google voice), then 2 consecutive ports from the
10001-2 range are used for voice.  Since GV uses TLS, I'm wondering if
5061 also comes into play.  I assume you started from this link:
https://wiki.asterisk.org/wiki/display/AST/Calling+using+Google


-Original Message-
From: Frank [mailto:fr...@efirehouse.com] 
Sent: Tuesday, January 22, 2013 10:51 AM
To: Danny Nicholas
Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Google voice with no voice

Danny,

I tried netstat -anp on a working outgoing call, and non working incomgin,
and I see that the working has "CONNECTED" status, while the other one has
nothing like that at all. Any other idea ?

Thanks



On 1/22/13 11:36 AM, Danny Nicholas wrote:
> Do a "netstat -anp" during the call.  This will (hopefully) show you 
> where the out of range condition is occurring.
>
> -Original Message-
> From: Frank [mailto:fr...@efirehouse.com]
> Sent: Tuesday, January 22, 2013 10:33 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Cc: Danny Nicholas
> Subject: Re: [asterisk-users] Google voice with no voice
>
> Danny,
>
> Thanks for the trick, that made all outgoing calls working.
> Now, the issue is with incoming calls. Even if I turn off all other 
> phones in google voice configuration and have the calls routed to my 
> Google Chat only, this is what happens:
>
> The Asterisk receives the call.
> The D70 rings.
> If I pick up, nothing happens (I see on the D70 display that I picked 
> up) The caller still hear the ringing tone
>
> THat's what I see on the console:
>
> *CLI> -- Executing [r...@gmail.com@gtalk_incoming:1]
> Verbose("Gtalk/+1xx-2310", "0, Incoming gtalk from 
> "+1xxx...@voice.google.com/srvres-MTAuMTIuMTU1LjE1Ojk4MjU=" <>") 
> in new stack
>Incoming gtalk from
> "+xxx...@voice.google.com/srvres-MTAuMTIuMTU1LjE1Ojk4MjU=" <>
>   -- Executing [r...@gmail.com@gtalk_incoming:2] 
> Answer("Gtalk/+xx-2310", "") in new stack
>   -- Executing [r...@gmail.com@gtalk_incoming:3] 
> Wait("Gtalk/+xx-2310", "2") in new stack
>   -- Executing [r...@gmail.com@gtalk_incoming:4] 
> Dial("Gtalk/+xx-2310", "SIP/D70") in new stack
> == Using SIP RTP CoS mark 5
>   -- Called SIP/D70
>
> *CLI>
> *CLI> -- SIP/D70-0006 is ringing
>
> *CLI> -- SIP/D70-0006 answered Gtalk/+xx-2310
> == Spawn extension (gtalk_incoming, r...@gmail.com, 4) exited 
> non-zero on 'Gtalk/+xx-2310'
>
>
>
>
>
>
> On 1/22/13 11:21 AM, Danny Nicholas wrote:
>> You are obviously getting the call connected, so the subnet issue is
moot.
>> What this sounds like (pardon the pun) to me is an rtp skip issue.  
>> The "working" calls are generating rtp connections in the allowed 
>> range; the other calls have one or more ports outside of your rtp 
>> range.  Verify that all of your ports defined in rtp.conf 
>> (10000-2 by default) are open in the firewall.
>>
>> -Original Message-
>> From: asterisk-users-boun...@lists.digium.com
>> [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Frank
>> Sent: Tuesday, January 22, 2013 10:18 AM
>> To: ch...@acsdi.com; Asterisk Users Mailing List - Non-Commercial
> Discussion
>> Subject: Re: [asterisk-users] Google voice with no voice
>>
>> Chris,
>>
>> I covered the whole 74.125.225.* subnet.
>> Even if I open the ports mentioned below for all (not limited to IP
>> addresses) I still have the same issue.
>>
>> Have anyone ever succeeded in such configuration? :
>>
>> Digium phones on 2 different private networks (2 different buildings) 
>> Asterisk server in the internet with a public IP Use Google Voice
>>
>> Even if you have asterisk on a private network, but have the same 
>> kind of solution working for you, I'd love to hear your story..
>>
>>
>>
>>
>>
>> On 1/22/13 9:55 AM, Christopher Harrington wrote:
>>> On Mon, Jan 21, 2013 at 9:59 PM, Frank >> <mailto:fr...@efirehouse.com>> wrote:
>>>
>>>   Actually, the funny thing is that it works randomly.
>>>
>>>
>>> This may be due to the fact that voice.google.com 
>>> <http://voice.google.com> actually resolves to a range of IP addresses.
>>> When you set up your firewall, it may not be inc

Re: [asterisk-users] Google voice with no voice

[Frank]

Danny,

I tried netstat -anp on a working outgoing call, and non working 
incomgin, and I see that the working has "CONNECTED" status, while the 
other one has nothing like that at all. Any other idea ?


Thanks



On 1/22/13 11:36 AM, Danny Nicholas wrote:

Do a "netstat -anp" during the call.  This will (hopefully) show you where
the out of range condition is occurring.

-Original Message-
From: Frank [mailto:fr...@efirehouse.com]
Sent: Tuesday, January 22, 2013 10:33 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Cc: Danny Nicholas
Subject: Re: [asterisk-users] Google voice with no voice

Danny,

Thanks for the trick, that made all outgoing calls working.
Now, the issue is with incoming calls. Even if I turn off all other phones
in google voice configuration and have the calls routed to my Google Chat
only, this is what happens:

The Asterisk receives the call.
The D70 rings.
If I pick up, nothing happens (I see on the D70 display that I picked up)
The caller still hear the ringing tone

THat's what I see on the console:

*CLI> -- Executing [r...@gmail.com@gtalk_incoming:1]
Verbose("Gtalk/+1xx-2310", "0, Incoming gtalk from
"+1xxx...@voice.google.com/srvres-MTAuMTIuMTU1LjE1Ojk4MjU=" <>") in new
stack
   Incoming gtalk from
"+xxx...@voice.google.com/srvres-MTAuMTIuMTU1LjE1Ojk4MjU=" <>
  -- Executing [r...@gmail.com@gtalk_incoming:2]
Answer("Gtalk/+xx-2310", "") in new stack
  -- Executing [r...@gmail.com@gtalk_incoming:3]
Wait("Gtalk/+xx-2310", "2") in new stack
  -- Executing [r...@gmail.com@gtalk_incoming:4]
Dial("Gtalk/+xx-2310", "SIP/D70") in new stack
== Using SIP RTP CoS mark 5
  -- Called SIP/D70

*CLI>
*CLI> -- SIP/D70-0006 is ringing

*CLI> -- SIP/D70-0006 answered Gtalk/+xx-2310
== Spawn extension (gtalk_incoming, r...@gmail.com, 4) exited
non-zero on 'Gtalk/+xx-2310'






On 1/22/13 11:21 AM, Danny Nicholas wrote:

You are obviously getting the call connected, so the subnet issue is moot.
What this sounds like (pardon the pun) to me is an rtp skip issue.  The
"working" calls are generating rtp connections in the allowed range; the
other calls have one or more ports outside of your rtp range.  Verify that
all of your ports defined in rtp.conf (1-2 by default) are open in
the firewall.

-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Frank
Sent: Tuesday, January 22, 2013 10:18 AM
To: ch...@acsdi.com; Asterisk Users Mailing List - Non-Commercial

Discussion

Subject: Re: [asterisk-users] Google voice with no voice

Chris,

I covered the whole 74.125.225.* subnet.
Even if I open the ports mentioned below for all (not limited to IP
addresses) I still have the same issue.

Have anyone ever succeeded in such configuration? :

Digium phones on 2 different private networks (2 different buildings)
Asterisk server in the internet with a public IP Use Google Voice

Even if you have asterisk on a private network, but have the same kind of
solution working for you, I'd love to hear your story..





On 1/22/13 9:55 AM, Christopher Harrington wrote:

On Mon, Jan 21, 2013 at 9:59 PM, Frank mailto:fr...@efirehouse.com>> wrote:

  Actually, the funny thing is that it works randomly.


This may be due to the fact that voice.google.com
<http://voice.google.com> actually resolves to a range of IP addresses.
When you set up your firewall, it may not be including all of the
possible resolutions for voice.google.com...

voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.36
voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.46
voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.33
voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.32
voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.41
voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.38
voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.35
voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.39
voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.40
voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.34
voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.37

(ie 74.125.225.32-41 and 74.125.225.46)

Since these are short TTL values (the 300 means 5 minutes) there may be
a brief period where your devices and your firewall agree, before one or
both change their mind about the IP address behind that hostname.



  I just tried out of the blue calling from D70 through Google Voice
  to a cell phone, and it worked. I hung up, redial, and no audio at

all.

Re: [asterisk-users] Google voice with no voice

[Danny Nicholas]

Do a "netstat -anp" during the call.  This will (hopefully) show you where
the out of range condition is occurring.

-Original Message-
From: Frank [mailto:fr...@efirehouse.com] 
Sent: Tuesday, January 22, 2013 10:33 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Cc: Danny Nicholas
Subject: Re: [asterisk-users] Google voice with no voice

Danny,

Thanks for the trick, that made all outgoing calls working.
Now, the issue is with incoming calls. Even if I turn off all other phones
in google voice configuration and have the calls routed to my Google Chat
only, this is what happens:

The Asterisk receives the call.
The D70 rings.
If I pick up, nothing happens (I see on the D70 display that I picked up)
The caller still hear the ringing tone

THat's what I see on the console:

*CLI> -- Executing [r...@gmail.com@gtalk_incoming:1] 
Verbose("Gtalk/+1xx-2310", "0, Incoming gtalk from
"+1xxx...@voice.google.com/srvres-MTAuMTIuMTU1LjE1Ojk4MjU=" <>") in new
stack
  Incoming gtalk from
"+xxx...@voice.google.com/srvres-MTAuMTIuMTU1LjE1Ojk4MjU=" <>
 -- Executing [r...@gmail.com@gtalk_incoming:2]
Answer("Gtalk/+xx-2310", "") in new stack
 -- Executing [r...@gmail.com@gtalk_incoming:3]
Wait("Gtalk/+xx-2310", "2") in new stack
 -- Executing [r...@gmail.com@gtalk_incoming:4]
Dial("Gtalk/+xx-2310", "SIP/D70") in new stack
   == Using SIP RTP CoS mark 5
 -- Called SIP/D70

*CLI>
*CLI> -- SIP/D70-0006 is ringing

*CLI> -- SIP/D70-0006 answered Gtalk/+xx-2310
   == Spawn extension (gtalk_incoming, r...@gmail.com, 4) exited 
non-zero on 'Gtalk/+xx-2310'






On 1/22/13 11:21 AM, Danny Nicholas wrote:
> You are obviously getting the call connected, so the subnet issue is moot.
> What this sounds like (pardon the pun) to me is an rtp skip issue.  The
> "working" calls are generating rtp connections in the allowed range; the
> other calls have one or more ports outside of your rtp range.  Verify that
> all of your ports defined in rtp.conf (1-2 by default) are open in
> the firewall.
>
> -Original Message-
> From: asterisk-users-boun...@lists.digium.com
> [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Frank
> Sent: Tuesday, January 22, 2013 10:18 AM
> To: ch...@acsdi.com; Asterisk Users Mailing List - Non-Commercial
Discussion
> Subject: Re: [asterisk-users] Google voice with no voice
>
> Chris,
>
> I covered the whole 74.125.225.* subnet.
> Even if I open the ports mentioned below for all (not limited to IP
> addresses) I still have the same issue.
>
> Have anyone ever succeeded in such configuration? :
>
> Digium phones on 2 different private networks (2 different buildings)
> Asterisk server in the internet with a public IP Use Google Voice
>
> Even if you have asterisk on a private network, but have the same kind of
> solution working for you, I'd love to hear your story..
>
>
>
>
>
> On 1/22/13 9:55 AM, Christopher Harrington wrote:
>> On Mon, Jan 21, 2013 at 9:59 PM, Frank > <mailto:fr...@efirehouse.com>> wrote:
>>
>>  Actually, the funny thing is that it works randomly.
>>
>>
>> This may be due to the fact that voice.google.com
>> <http://voice.google.com> actually resolves to a range of IP addresses.
>> When you set up your firewall, it may not be including all of the
>> possible resolutions for voice.google.com...
>>
>> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.36
>> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.46
>> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.33
>> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.32
>> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.41
>> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.38
>> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.35
>> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.39
>> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.40
>> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.34
>> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.37
>>
>> (ie 74.125.225.32-41 and 74.125.225.46)
>>
>> Since these are short TTL values (the 300 means 5 minutes) there may be
>> a brief period where your devices and your firewall agree, before one or
>> both change their mind about the IP address behind that hostname.
>>
>>
>>
>>

Re: [asterisk-users] Google voice with no voice

[Frank]

Danny,

Thanks for the trick, that made all outgoing calls working.
Now, the issue is with incoming calls. Even if I turn off all other 
phones in google voice configuration and have the calls routed to my 
Google Chat only, this is what happens:


The Asterisk receives the call.
The D70 rings.
If I pick up, nothing happens (I see on the D70 display that I picked up)
The caller still hear the ringing tone

THat's what I see on the console:

*CLI> -- Executing [r...@gmail.com@gtalk_incoming:1] 
Verbose("Gtalk/+1xx-2310", "0, Incoming gtalk from 
"+1xxx...@voice.google.com/srvres-MTAuMTIuMTU1LjE1Ojk4MjU=" <>") in 
new stack
 Incoming gtalk from 
"+xxx...@voice.google.com/srvres-MTAuMTIuMTU1LjE1Ojk4MjU=" <>
-- Executing [r...@gmail.com@gtalk_incoming:2] 
Answer("Gtalk/+xx-2310", "") in new stack
-- Executing [r...@gmail.com@gtalk_incoming:3] 
Wait("Gtalk/+xx-2310", "2") in new stack
-- Executing [r...@gmail.com@gtalk_incoming:4] 
Dial("Gtalk/+xx-2310", "SIP/D70") in new stack

  == Using SIP RTP CoS mark 5
-- Called SIP/D70

*CLI>
*CLI> -- SIP/D70-0006 is ringing

*CLI> -- SIP/D70-0006 answered Gtalk/+xx-2310
  == Spawn extension (gtalk_incoming, r...@gmail.com, 4) exited 
non-zero on 'Gtalk/+xx-2310'







On 1/22/13 11:21 AM, Danny Nicholas wrote:

You are obviously getting the call connected, so the subnet issue is moot.
What this sounds like (pardon the pun) to me is an rtp skip issue.  The
"working" calls are generating rtp connections in the allowed range; the
other calls have one or more ports outside of your rtp range.  Verify that
all of your ports defined in rtp.conf (1-2 by default) are open in
the firewall.

-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Frank
Sent: Tuesday, January 22, 2013 10:18 AM
To: ch...@acsdi.com; Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Google voice with no voice

Chris,

I covered the whole 74.125.225.* subnet.
Even if I open the ports mentioned below for all (not limited to IP
addresses) I still have the same issue.

Have anyone ever succeeded in such configuration? :

Digium phones on 2 different private networks (2 different buildings)
Asterisk server in the internet with a public IP Use Google Voice

Even if you have asterisk on a private network, but have the same kind of
solution working for you, I'd love to hear your story..





On 1/22/13 9:55 AM, Christopher Harrington wrote:

On Mon, Jan 21, 2013 at 9:59 PM, Frank mailto:fr...@efirehouse.com>> wrote:

 Actually, the funny thing is that it works randomly.


This may be due to the fact that voice.google.com
<http://voice.google.com> actually resolves to a range of IP addresses.
When you set up your firewall, it may not be including all of the
possible resolutions for voice.google.com...

voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.36
voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.46
voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.33
voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.32
voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.41
voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.38
voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.35
voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.39
voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.40
voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.34
voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.37

(ie 74.125.225.32-41 and 74.125.225.46)

Since these are short TTL values (the 300 means 5 minutes) there may be
a brief period where your devices and your firewall agree, before one or
both change their mind about the IP address behind that hostname.



 I just tried out of the blue calling from D70 through Google Voice
 to a cell phone, and it worked. I hung up, redial, and no audio at

all.



 On 1/21/13 10:38 PM, Frank wrote:

 Greetings all,

 I was reading the documentation tonight, and decided to try
 Google voice
 with my asterisk.

 I was able to setup iksemel, connect to google using jabber, and
 connect
 to google voice using gtalk.


 Here is my physical configuration:

 Digium D70 <-- private network 192.168.1.x --> Airport express

<-->

 Internet <--> Asterisk with public IP

 My asterisk has the following ports open:
 5060 tcp/udp from my Airport Express public IP and from
 voice.google.com &

Re: [asterisk-users] Google voice with no voice

[Danny Nicholas]

You are obviously getting the call connected, so the subnet issue is moot.
What this sounds like (pardon the pun) to me is an rtp skip issue.  The
"working" calls are generating rtp connections in the allowed range; the
other calls have one or more ports outside of your rtp range.  Verify that
all of your ports defined in rtp.conf (1-2 by default) are open in
the firewall.

-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Frank
Sent: Tuesday, January 22, 2013 10:18 AM
To: ch...@acsdi.com; Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Google voice with no voice

Chris,

I covered the whole 74.125.225.* subnet.
Even if I open the ports mentioned below for all (not limited to IP
addresses) I still have the same issue.

Have anyone ever succeeded in such configuration? :

Digium phones on 2 different private networks (2 different buildings)
Asterisk server in the internet with a public IP Use Google Voice

Even if you have asterisk on a private network, but have the same kind of
solution working for you, I'd love to hear your story..





On 1/22/13 9:55 AM, Christopher Harrington wrote:
> On Mon, Jan 21, 2013 at 9:59 PM, Frank  <mailto:fr...@efirehouse.com>> wrote:
>
> Actually, the funny thing is that it works randomly.
>
>
> This may be due to the fact that voice.google.com
> <http://voice.google.com> actually resolves to a range of IP addresses.
> When you set up your firewall, it may not be including all of the
> possible resolutions for voice.google.com...
>
> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.36
> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.46
> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.33
> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.32
> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.41
> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.38
> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.35
> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.39
> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.40
> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.34
> voice.l.google.com <http://voice.l.google.com>.300INA74.125.225.37
>
> (ie 74.125.225.32-41 and 74.125.225.46)
>
> Since these are short TTL values (the 300 means 5 minutes) there may be
> a brief period where your devices and your firewall agree, before one or
> both change their mind about the IP address behind that hostname.
>
>
>
> I just tried out of the blue calling from D70 through Google Voice
> to a cell phone, and it worked. I hung up, redial, and no audio at
all.
>
>
> On 1/21/13 10:38 PM, Frank wrote:
>
> Greetings all,
>
> I was reading the documentation tonight, and decided to try
> Google voice
> with my asterisk.
>
> I was able to setup iksemel, connect to google using jabber, and
> connect
> to google voice using gtalk.
>
>
> Here is my physical configuration:
>
> Digium D70 <-- private network 192.168.1.x --> Airport express
<-->
> Internet <--> Asterisk with public IP
>
> My asterisk has the following ports open:
> 5060 tcp/udp from my Airport Express public IP and from
> voice.google.com <http://voice.google.com>
> 10,000:20,000 from my Airport Express public IP and from
> voice.google.com <http://voice.google.com>
>
> My issue is that when I place a call with google voice, I have
> no audio
> path at all in both way.
>
> When a call is received on google voice (and sent to the D70),
> if I pick
> up, nothing happen, and the caller still hear the ringing tone.
>
>
>
> My D70 is setup as follow in the sip.conf:
> [D70]
> type=friend
> nat=yes
> qualify=yes
> directmedia=no
> host=dynamic
> secret=takapoum
> disallow=all
> allow=ulaw
> context=LocalSets
> mailbox=D70@default
>
>
> my gtalk.conf is setup as follow:
> [general]
> bindaddr=0.0.0.0
> allowguest=yes
>
> [guest]
> disallow=all
> allow=ulaw
> context=gtalk_incoming
> connection=asterisk
>
>
>
> and finally, the interesting parts in my extensions.conf are
> setup as
> follow:

Re: [asterisk-users] Google voice with no voice

[Frank]

Chris,

I covered the whole 74.125.225.* subnet.
Even if I open the ports mentioned below for all (not limited to IP 
addresses) I still have the same issue.


Have anyone ever succeeded in such configuration? :

Digium phones on 2 different private networks (2 different buildings)
Asterisk server in the internet with a public IP
Use Google Voice

Even if you have asterisk on a private network, but have the same kind 
of solution working for you, I'd love to hear your story..






On 1/22/13 9:55 AM, Christopher Harrington wrote:

On Mon, Jan 21, 2013 at 9:59 PM, Frank mailto:fr...@efirehouse.com>> wrote:

Actually, the funny thing is that it works randomly.


This may be due to the fact that voice.google.com
 actually resolves to a range of IP addresses.
When you set up your firewall, it may not be including all of the
possible resolutions for voice.google.com...

voice.l.google.com .300INA74.125.225.36
voice.l.google.com .300INA74.125.225.46
voice.l.google.com .300INA74.125.225.33
voice.l.google.com .300INA74.125.225.32
voice.l.google.com .300INA74.125.225.41
voice.l.google.com .300INA74.125.225.38
voice.l.google.com .300INA74.125.225.35
voice.l.google.com .300INA74.125.225.39
voice.l.google.com .300INA74.125.225.40
voice.l.google.com .300INA74.125.225.34
voice.l.google.com .300INA74.125.225.37

(ie 74.125.225.32-41 and 74.125.225.46)

Since these are short TTL values (the 300 means 5 minutes) there may be
a brief period where your devices and your firewall agree, before one or
both change their mind about the IP address behind that hostname.



I just tried out of the blue calling from D70 through Google Voice
to a cell phone, and it worked. I hung up, redial, and no audio at all.


On 1/21/13 10:38 PM, Frank wrote:

Greetings all,

I was reading the documentation tonight, and decided to try
Google voice
with my asterisk.

I was able to setup iksemel, connect to google using jabber, and
connect
to google voice using gtalk.


Here is my physical configuration:

Digium D70 <-- private network 192.168.1.x --> Airport express <-->
Internet <--> Asterisk with public IP

My asterisk has the following ports open:
5060 tcp/udp from my Airport Express public IP and from
voice.google.com 
10,000:20,000 from my Airport Express public IP and from
voice.google.com 

My issue is that when I place a call with google voice, I have
no audio
path at all in both way.

When a call is received on google voice (and sent to the D70),
if I pick
up, nothing happen, and the caller still hear the ringing tone.



My D70 is setup as follow in the sip.conf:
[D70]
type=friend
nat=yes
qualify=yes
directmedia=no
host=dynamic
secret=takapoum
disallow=all
allow=ulaw
context=LocalSets
mailbox=D70@default


my gtalk.conf is setup as follow:
[general]
bindaddr=0.0.0.0
allowguest=yes

[guest]
disallow=all
allow=ulaw
context=gtalk_incoming
connection=asterisk



and finally, the interesting parts in my extensions.conf are
setup as
follow:
;Dialing out on google voice:
exten =>
_1zxxzxx,1,Dial(Gtalk/__asterisk/+${EXTEN}@voice.__google.com 
)
  same => n,Hangup()

;Google voice incoming
[gtalk_incoming]
exten => r...@gmail.com ,1,Verbose(0,
Incoming gtalk from ${CALLERID(all)})
  same => n,Answer()
  same => n,Wait(2)
  same => n,Dial(SIP/D70)
  same => Hangup()


I would appreciate if anyone could give me a hint about the
audio path.
This is a project that we I will try to setup in a small fire
department, and before I try it, I would like to make sure that my
Digium phones will be able to get full audio path behind private
networks.

Thanks a ton for the help !

--


--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
  http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Google voice with no voice

[Christopher Harrington]

On Mon, Jan 21, 2013 at 9:59 PM, Frank  wrote:

> Actually, the funny thing is that it works randomly.
>

This may be due to the fact that voice.google.com actually resolves to a
range of IP addresses. When you set up your firewall, it may not be
including all of the possible resolutions for voice.google.com...

voice.l.google.com. 300 IN A 74.125.225.36
voice.l.google.com. 300 IN A 74.125.225.46
voice.l.google.com. 300 IN A 74.125.225.33
voice.l.google.com. 300 IN A 74.125.225.32
voice.l.google.com. 300 IN A 74.125.225.41
voice.l.google.com. 300 IN A 74.125.225.38
voice.l.google.com. 300 IN A 74.125.225.35
voice.l.google.com. 300 IN A 74.125.225.39
voice.l.google.com. 300 IN A 74.125.225.40
voice.l.google.com. 300 IN A 74.125.225.34
voice.l.google.com. 300 IN A 74.125.225.37

(ie 74.125.225.32-41 and 74.125.225.46)

Since these are short TTL values (the 300 means 5 minutes) there may be a
brief period where your devices and your firewall agree, before one or both
change their mind about the IP address behind that hostname.





> I just tried out of the blue calling from D70 through Google Voice to a
> cell phone, and it worked. I hung up, redial, and no audio at all.
>
>
> On 1/21/13 10:38 PM, Frank wrote:
>
>> Greetings all,
>>
>> I was reading the documentation tonight, and decided to try Google voice
>> with my asterisk.
>>
>> I was able to setup iksemel, connect to google using jabber, and connect
>> to google voice using gtalk.
>>
>>
>> Here is my physical configuration:
>>
>> Digium D70 <-- private network 192.168.1.x --> Airport express <-->
>> Internet <--> Asterisk with public IP
>>
>> My asterisk has the following ports open:
>> 5060 tcp/udp from my Airport Express public IP and from voice.google.com
>> 10,000:20,000 from my Airport Express public IP and from voice.google.com
>>
>> My issue is that when I place a call with google voice, I have no audio
>> path at all in both way.
>>
>> When a call is received on google voice (and sent to the D70), if I pick
>> up, nothing happen, and the caller still hear the ringing tone.
>>
>>
>>
>> My D70 is setup as follow in the sip.conf:
>> [D70]
>> type=friend
>> nat=yes
>> qualify=yes
>> directmedia=no
>> host=dynamic
>> secret=takapoum
>> disallow=all
>> allow=ulaw
>> context=LocalSets
>> mailbox=D70@default
>>
>>
>> my gtalk.conf is setup as follow:
>> [general]
>> bindaddr=0.0.0.0
>> allowguest=yes
>>
>> [guest]
>> disallow=all
>> allow=ulaw
>> context=gtalk_incoming
>> connection=asterisk
>>
>>
>>
>> and finally, the interesting parts in my extensions.conf are setup as
>> follow:
>> ;Dialing out on google voice:
>> exten => _1zxxzxx,1,Dial(Gtalk/**asterisk/+${EXTEN}@voice.**
>> google.com )
>>  same => n,Hangup()
>>
>> ;Google voice incoming
>> [gtalk_incoming]
>> exten => r...@gmail.com,1,Verbose(0, Incoming gtalk from
>> ${CALLERID(all)})
>>  same => n,Answer()
>>  same => n,Wait(2)
>>  same => n,Dial(SIP/D70)
>>  same => Hangup()
>>
>>
>> I would appreciate if anyone could give me a hint about the audio path.
>> This is a project that we I will try to setup in a small fire
>> department, and before I try it, I would like to make sure that my
>> Digium phones will be able to get full audio path behind private networks.
>>
>> Thanks a ton for the help !
>>
>> --
>> __**__**_
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>
>> http://lists.digium.com/**mailman/listinfo/asterisk-**users
>>
>
> --
> __**__**_
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>   http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   
> http://lists.digium.com/**mailman/listinfo/asterisk-**users
>



-- 
-Chris Harrington
ACSDi Office: 763.559.5800
Mobile Phone: 612.326.4248
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
   http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Google voice with no voice

[Jim Lucas]

On 1/21/2013 7:59 PM, Frank wrote:

Actually, the funny thing is that it works randomly.
I just tried out of the blue calling from D70 through Google Voice to a
cell phone, and it worked. I hung up, redial, and no audio at all.


In the past, I have had strange behaviors like this as well.  Turned out 
to be a ARP race condition with my firewall with static IP assignments. 
 As soon as the second device would ARP, I would loose connectivity 
with the first device.


Check that you have no other device using the IP address that your D70 
is using.  Also, make sure that nothing else is competing with the 
Google Voice registration.


--
Jim Lucas

--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
  http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] Google voice with no voice

[Frank]

Actually, the funny thing is that it works randomly.
I just tried out of the blue calling from D70 through Google Voice to a 
cell phone, and it worked. I hung up, redial, and no audio at all.


On 1/21/13 10:38 PM, Frank wrote:

Greetings all,

I was reading the documentation tonight, and decided to try Google voice
with my asterisk.

I was able to setup iksemel, connect to google using jabber, and connect
to google voice using gtalk.


Here is my physical configuration:

Digium D70 <-- private network 192.168.1.x --> Airport express <-->
Internet <--> Asterisk with public IP

My asterisk has the following ports open:
5060 tcp/udp from my Airport Express public IP and from voice.google.com
10,000:20,000 from my Airport Express public IP and from voice.google.com

My issue is that when I place a call with google voice, I have no audio
path at all in both way.

When a call is received on google voice (and sent to the D70), if I pick
up, nothing happen, and the caller still hear the ringing tone.



My D70 is setup as follow in the sip.conf:
[D70]
type=friend
nat=yes
qualify=yes
directmedia=no
host=dynamic
secret=takapoum
disallow=all
allow=ulaw
context=LocalSets
mailbox=D70@default


my gtalk.conf is setup as follow:
[general]
bindaddr=0.0.0.0
allowguest=yes

[guest]
disallow=all
allow=ulaw
context=gtalk_incoming
connection=asterisk



and finally, the interesting parts in my extensions.conf are setup as
follow:
;Dialing out on google voice:
exten => _1zxxzxx,1,Dial(Gtalk/asterisk/+${EXTEN}@voice.google.com)
 same => n,Hangup()

;Google voice incoming
[gtalk_incoming]
exten => r...@gmail.com,1,Verbose(0, Incoming gtalk from ${CALLERID(all)})
 same => n,Answer()
 same => n,Wait(2)
 same => n,Dial(SIP/D70)
 same => Hangup()


I would appreciate if anyone could give me a hint about the audio path.
This is a project that we I will try to setup in a small fire
department, and before I try it, I would like to make sure that my
Digium phones will be able to get full audio path behind private networks.

Thanks a ton for the help !

--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
   http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
  http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

[asterisk-users] Google voice with no voice

[Frank]

Greetings all,

I was reading the documentation tonight, and decided to try Google voice 
with my asterisk.


I was able to setup iksemel, connect to google using jabber, and connect 
to google voice using gtalk.



Here is my physical configuration:

Digium D70 <-- private network 192.168.1.x --> Airport express <--> 
Internet <--> Asterisk with public IP


My asterisk has the following ports open:
5060 tcp/udp from my Airport Express public IP and from voice.google.com
10,000:20,000 from my Airport Express public IP and from voice.google.com

My issue is that when I place a call with google voice, I have no audio 
path at all in both way.


When a call is received on google voice (and sent to the D70), if I pick 
up, nothing happen, and the caller still hear the ringing tone.




My D70 is setup as follow in the sip.conf:
[D70]
type=friend
nat=yes
qualify=yes
directmedia=no
host=dynamic
secret=takapoum
disallow=all
allow=ulaw
context=LocalSets
mailbox=D70@default


my gtalk.conf is setup as follow:
[general]
bindaddr=0.0.0.0
allowguest=yes

[guest]
disallow=all
allow=ulaw
context=gtalk_incoming
connection=asterisk



and finally, the interesting parts in my extensions.conf are setup as 
follow:

;Dialing out on google voice:
exten => _1zxxzxx,1,Dial(Gtalk/asterisk/+${EXTEN}@voice.google.com)
same => n,Hangup()

;Google voice incoming
[gtalk_incoming]
exten => r...@gmail.com,1,Verbose(0, Incoming gtalk from ${CALLERID(all)})
same => n,Answer()
same => n,Wait(2)
same => n,Dial(SIP/D70)
same => Hangup()


I would appreciate if anyone could give me a hint about the audio path.
This is a project that we I will try to setup in a small fire 
department, and before I try it, I would like to make sure that my 
Digium phones will be able to get full audio path behind private networks.


Thanks a ton for the help !

--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
  http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users