Re: [asterisk-users] How to enable inboundCLI forX-Lite/Asterisk phone.
Quoting "Syed Nasruddin" <[EMAIL PROTECTED]>: > > How do we adjust zaptel and asterisk for CLI??. Is there some variable > to be set??.. kindly explain keeping in view your country settings this > will give me some hint.thanks Bearing in mind that these settings are for UK BT (even on other providers here, it is different), in /etc/asterisk/zapata.conf, I enabled the following: distinctiveringaftercid=yes usecallerid=yes cidsignalling=v23 (bell and dtmf are also available - it all depends on what is used in your country and by the provider of your line) sendcalleridafter=2 (this is a UK setting - it may not be needed where you are) I also have callwaitingcallerid=yes, but not sure I have any workable use for it at present. calllerid=asreceived is applied to the FXO port (channel 4 on my card, 6 on yours it seems) As I say, these settings are not necessarily correct for other countries - in particular the signalling and need for sendcalleridafter may be different. Can you connect a caller ID display unit to the line and check that caller ID is presented? If it isn't, you will need to get that enabled too. There is one other problem I have found but it probably won't apply to other countries, so see if this gets you anywhere. -- Phil Reynolds mail: [EMAIL PROTECTED] Web: http://www.tinsleyviaduct.com/phil/ Waltham 66, Emley Moor 69, Droitwich 79, Windows 95 This message was sent using IMP, the Internet Messaging Program. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] How to enable inboundCLI forX-Lite/Asterisk phone.
How do we adjust zaptel and asterisk for CLI??. Is there some variable to be set??.. kindly explain keeping in view your country settings this will give me some hint.thanks Syed Nasruddin -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Phil Reynolds Sent: Monday, October 13, 2008 7:47 PM To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] How to enable inboundCLI forX-Lite/Asterisk phone. Quoting "Syed Nasruddin" <[EMAIL PROTECTED]>: > > Hi, > > It is not showing any CLI information even after I have placed that > NoOp(${CALLERID(all)}) function for debugging. Following message was > displayed in debug: > > Executing [EMAIL PROTECTED]:3]NoOp("ZAP/6-1","""<>") > > What should I do since it is critical to have the callee number. First off, is CLI information being presented on that line. If so, you need to adjust zaptel and asterisk so that they see it - this is a country-specific matter - what works for one may well not work for another. If CLI is not being presented on that line, you need to have that enabled. -- Phil Reynolds mail: [EMAIL PROTECTED] Web: http://www.tinsleyviaduct.com/phil/ Waltham 66, Emley Moor 69, Droitwich 79, Windows 95 This message was sent using IMP, the Internet Messaging Program. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users