Re: [asterisk-users] Out-Going Calleriid
Perhaps your carrier has changed the way they handle outbound caller id. Could they be blocking it somehow all of a sudden? Might be worth a phone call? steve On Thu, 2008-05-08 at 08:29 +0100, Tim Guy wrote: Thanks for the heads up again guys. Still no go. It's a ISDN30 PRI on NTL(Virgin) in the UK I currently have a Mitel 3300 connected happily sending CallerID's so I know it the teleco supports it. The Mitel is set to send 01926xx so that's what I'm trying to get Asterisk to send. Running an Openvox D210E that runs with wct4xxp drivers. It definitely work before so it must be something I've done, OR, a certain driver / zaptel version Caller id in-coming is fine, just won't send out. Huff Tim p.s Sorry for the disclaimer. Should be gone on this one. This message is sent in confidence for the addressee only. Unless specifically stated, the contents are not to be disclosed to anyone other than the addressee. Unauthorised recipients must preserve this confidentiality and should please advise the sender immediately of any error in transmission. The views an opinions expressed in this e-mail message are the sender's own and do not necessarily represent the views and opinions of NS Optimum Ltd. Although this e-mail and attachments are believed to be free of any virus or other defects which may affect any computer or IT systems into which they are received, no responsibility is accepted by NS Optimum Ltd for any loss or damage arising in any way from the receipt or use thereof. Place of registration: England, Registered Office: Jenton Road, Sydenham Ind Est, Leamington Spa, Warwickshire, CV31 1XS, Registered No 3018839 ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Out-Going Calleriid
Thanks for the heads up again guys. Still no go. It's a ISDN30 PRI on NTL(Virgin) in the UK I currently have a Mitel 3300 connected happily sending CallerID's so I know it the teleco supports it. The Mitel is set to send 01926xx so that's what I'm trying to get Asterisk to send. Running an Openvox D210E that runs with wct4xxp drivers. It definitely work before so it must be something I've done, OR, a certain driver / zaptel version Caller id in-coming is fine, just won't send out. Huff Tim p.s Sorry for the disclaimer. Should be gone on this one. This message is sent in confidence for the addressee only. Unless specifically stated, the contents are not to be disclosed to anyone other than the addressee. Unauthorised recipients must preserve this confidentiality and should please advise the sender immediately of any error in transmission. The views an opinions expressed in this e-mail message are the sender's own and do not necessarily represent the views and opinions of NS Optimum Ltd. Although this e-mail and attachments are believed to be free of any virus or other defects which may affect any computer or IT systems into which they are received, no responsibility is accepted by NS Optimum Ltd for any loss or damage arising in any way from the receipt or use thereof. Place of registration: England, Registered Office: Jenton Road, Sydenham Ind Est, Leamington Spa, Warwickshire, CV31 1XS, Registered No 3018839 ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Out-Going Calleriid
Tim Guy wrote: It's a ISDN30 PRI on NTL(Virgin) in the UK I currently have a Mitel 3300 connected happily sending CallerID's so I know it the teleco supports it. The Mitel is set to send 01926xx so that's what I'm trying to get Asterisk to send. Running an Openvox D210E that runs with wct4xxp drivers. It definitely work before so it must be something I've done, OR, a certain driver / zaptel version Caller id in-coming is fine, just won't send out. If you view the asterisk debug for an outgoing call, what do you see your system sending out? My ISDN30 PRI with NTL/Virgin only sends the last 4 digits: [EMAIL PROTECTED]:10] Set(IAX2/255-8, USEROUTCID=Alastair Battrick 0255) in new stack [EMAIL PROTECTED]:23] NoOp(IAX2/255-2, CallerID set to Alastair Battrick 0255) in new stack -- Alastair Battrick ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Out-Going Calleriid
Installing a new box onto UK NTL (Virgin Media)
During testing phase the callerid worked, now it doesn't.
Can someone confirm that my syntax is right before I start ripping the
configs to bits
exten = _9.,1,Set(CALLERID(number)=01926xx)
exten = _9.,2,Dial(ZAP/1/${EXTEN:1})
Ive tried all permutations of the CALLERID (ie CALLERID(NAME) and
CALLERID(NUMBER) but it just wont work anymore.
Zapata has the following relevant settings
usecallerid=yes
hidecallerid=no
callwaiting=yes
Im Stumped
Tim
This message is sent in confidence for the addressee only. Unless specifically
stated, the contents are not to be disclosed to anyone other than the
addressee. Unauthorised recipients must preserve this confidentiality and
should please advise the sender immediately of any error in transmission. The
views an opinions expressed in this e-mail message are the sender's own and do
not necessarily represent the views and opinions of NS Optimum Ltd. Although
this e-mail and attachments are believed to be free of any virus or other
defects which may affect any computer or IT systems into which they are
received, no responsibility is accepted by NS Optimum Ltd for any loss or
damage arising in any way from the receipt or use thereof.
Place of registration: England, Registered Office: Jenton Road, Sydenham Ind
Est, Leamington Spa, Warwickshire, CV31 1XS, Registered No 3018839
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Out-Going Calleriid
The leading 0 is not part of Caller*ID. Remove it.
Tim Guy wrote:
Installing a new box onto UK NTL (Virgin Media)
During testing phase the callerid worked, now it doesn't.
Can someone confirm that my syntax is right before I start ripping the
configs to bits
exten = _9.,1,Set(CALLERID(number)=01926xx)
exten = _9.,2,Dial(ZAP/1/${EXTEN:1})
Ive tried all permutations of the CALLERID (ie CALLERID(NAME) and
CALLERID(NUMBER) but it just wont work anymore.
Zapata has the following relevant settings
usecallerid=yes
hidecallerid=no
callwaiting=yes
Im Stumped
Tim
This message is sent in confidence for the addressee only. Unless
specifically stated, the contents are not to be disclosed to anyone other
than the addressee. Unauthorised recipients must preserve this
confidentiality and should please advise the sender immediately of any error
in transmission. The views an opinions expressed in this e-mail message are
the sender's own and do not necessarily represent the views and opinions of
NS Optimum Ltd. Although this e-mail and attachments are believed to be free
of any virus or other defects which may affect any computer or IT systems
into which they are received, no responsibility is accepted by NS Optimum Ltd
for any loss or damage arising in any way from the receipt or use thereof.
Place of registration: England, Registered Office: Jenton Road, Sydenham Ind
Est, Leamington Spa, Warwickshire, CV31 1XS, Registered No 3018839
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Consulting for Asterisk, Polycom, Sangoma, Digium, Cisco, LAN, WAN, QoS,
T-1, PRI, Frame Relay, Linux, and network design. Based near
Birmingham, AL. Now accepting clients worldwide.
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Out-Going Calleriid
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Wieling Sent: 07 May 2008 20:14 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Out-Going Calleriid The leading 0 is not part of Caller*ID. Remove it. Thanks for your mail Eric. Its not that Im afraid. Dialing my mobile I'm still getting 'Private Caller' This message is sent in confidence for the addressee only. Unless specifically stated, the contents are not to be disclosed to anyone other than the addressee. Unauthorised recipients must preserve this confidentiality and should please advise the sender immediately of any error in transmission. The views an opinions expressed in this e-mail message are the sender's own and do not necessarily represent the views and opinions of NS Optimum Ltd. Although this e-mail and attachments are believed to be free of any virus or other defects which may affect any computer or IT systems into which they are received, no responsibility is accepted by NS Optimum Ltd for any loss or damage arising in any way from the receipt or use thereof. Place of registration: England, Registered Office: Jenton Road, Sydenham Ind Est, Leamington Spa, Warwickshire, CV31 1XS, Registered No 3018839 ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Out-Going Calleriid
Tim Guy schrieb:
exten = _9.,1,Set(CALLERID(number)=01926xx)
exten = _9.,2,Dial(ZAP/1/${EXTEN:1})
Ive tried all permutations of the CALLERID (ie CALLERID(NAME) and
CALLERID(NUMBER) but it just wont work anymore.
Maybe CALLERID(num) works?
Grüße,
Philipp Kempgen
--
amooma GmbH - Bachstr. 126 - 56566 Neuwied - http://www.amooma.de
Let's use IT to solve problems and not to create new ones.
Asterisk? - http://www.das-asterisk-buch.de
Geschäftsführer: Stefan Wintermeyer
Handelsregister: Neuwied B 14998
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Out-Going Calleriid
Tim Guy wrote: -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Wieling Sent: 07 May 2008 20:14 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Out-Going Calleriid The leading 0 is not part of Caller*ID. Remove it. Thanks for your mail Eric. Its not that Im afraid. Dialing my mobile I'm still getting 'Private Caller' This message is sent in confidence for the addressee only. Unless specifically stated, the contents are not to be disclosed to anyone other than the addressee. Unauthorised recipients must preserve this confidentiality and should please advise the sender immediately of any error in transmission. The views an opinions expressed in this e-mail message are the sender's own and do not necessarily represent the views and opinions of NS Optimum Ltd. Although this e-mail and attachments are believed to be free of any virus or other defects which may affect any computer or IT systems into which they are received, no responsibility is accepted by NS Optimum Ltd for any loss or damage arising in any way from the receipt or use thereof. Place of registration: England, Registered Office: Jenton Road, Sydenham Ind Est, Leamington Spa, Warwickshire, CV31 1XS, Registered No 3018839 ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Did the type of circuit you use change? That is, were you using a digital line which passed caller-id during testing, then on the new box use an analog, or a circuit which doesn't pass caller-id? Mik ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Out-Going Calleriid
On Wed, May 07, 2008 at 07:46:59PM +0100, Tim Guy wrote:
Installing a new box onto UK NTL (Virgin Media)
During testing phase the callerid worked, now it doesn't.
Can someone confirm that my syntax is right before I start ripping the
configs to bits
exten = _9.,1,Set(CALLERID(number)=01926xx)
exten = _9.,2,Dial(ZAP/1/${EXTEN:1})
Ive tried all permutations of the CALLERID (ie CALLERID(NAME) and
CALLERID(NUMBER) but it just wont work anymore.
Zapata has the following relevant settings
usecallerid=yes
hidecallerid=no
callwaiting=yes
I presume you're running a PRI or BRI line from Virgin? If you have an
analogue line it's unlikely you have the ability to set your CLID.
If you have an ISDN variant, then you should be able to set it, but
generally (depending on how the switch is set-up) only to numbers
associated with that line. It also depends on the number of digits that
the switch expects i.e. it may just be 1926xx, or it may well be
just the xx part.
Steve
--
NetTek Ltd UK mob +44-(0)7775 755503
UK +44-(0)20 79932612 / US +1-(310)8577715 / Fax +44-(0)20 7483 2455
Skype/GoogleTalk/AIM/Gizmo/Mac stevekennedyuk / MSN [EMAIL PROTECTED]
Euro Tech News Blog http://eurotechnews.blogspot.com
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Out-Going Calleriid
Tim Guy wrote:
Installing a new box onto UK NTL (Virgin Media)
During testing phase the callerid worked, now it doesn't.
Can someone confirm that my syntax is right before I start ripping the
configs to bits
exten = _9.,1,Set(CALLERID(number)=01926xx)
exten = _9.,2,Dial(ZAP/1/${EXTEN:1})
Ive tried all permutations of the CALLERID (ie CALLERID(NAME) and
CALLERID(NUMBER) but it just wont work anymore.
Zapata has the following relevant settings
usecallerid=yes
hidecallerid=no
callwaiting=yes
you may need to add
usecallingpres=yes
in zapata.conf
and also add
exten = _9.,n,SetCallerPres(allow)
before the Dial command in extensions.conf.
--
Edwin Lam [EMAIL PROTECTED]
Systems Engineer, Office General, Inc.
Ph: +1 415 439 4988 Fax: +1 415 283 3370
http://pgpkeys.mit.edu:11371/pks/lookup?op=getsearch=0xD6506D20
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
