Re: [asterisk-users] PRI commands missing...
Arpit Mehta wrote: This happens when your pri line is down. This has happened a couple of times to me and the pri commands come back when the pri line is up. My guess is that your pri line is down. No. The pri commands should be there even if the span goes down. The reason why the pri commands wouldn't be there is that chan_zap didn't load for some reason. Try starting asterisk with the - options to see what chan_zap says when it tries to load. Matthew Fredrickson Hope it helps. Arpit On 10/31/07, Carlos Chavez [EMAIL PROTECTED] wrote: I have an Asterisk server running Elastix but patched to use Unicall. Everything seems to be working fine and the TE220 card is up and running with port 1 configured as PRI and port 2 as MFC/R2. We can already send and receive calls on port two but we cannot on port one. That is when we noticed that there are no PRI commands available on the Asterisk CLI. We cannot use PRI DEBUG SPAN to determine why port 1 is not receiving or sending calls. Why would this commands be missing? -- Carlos Chavez Director de Tecnología Telecomunicaciones Abiertas de México S.A. de C.V. Tel: +52-55-91169161 Ext 2001 ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Matthew Fredrickson Software/Firmware Engineer Digium, Inc. ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI commands missing...
On Thu, Nov 01, 2007 at 12:09:50PM -0500, Matthew Fredrickson wrote: Arpit Mehta wrote: This happens when your pri line is down. This has happened a couple of times to me and the pri commands come back when the pri line is up. My guess is that your pri line is down. No. The pri commands should be there even if the span goes down. The reason why the pri commands wouldn't be there is that chan_zap didn't load for some reason. Try starting asterisk with the - options to see what chan_zap says when it tries to load. Actually you need much less v-s should give less noise for the case Asterisk actually does load. -- Tzafrir Cohen icq#16849755 jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI commands missing...
Well, this happened to me one time when I forgot to compile the pri library before the asterisk! Could you have done that? on Wednesday 10/31/2007 Tzafrir Cohen([EMAIL PROTECTED]) wrote On Wed, Oct 31, 2007 at 12:06:25AM -0600, Carlos Chavez wrote: I have an Asterisk server running Elastix but patched to use Unicall. Everything seems to be working fine and the TE220 card is up and running with port 1 configured as PRI and port 2 as MFC/R2. We can already send and receive calls on port two but we cannot on port one. That is when we noticed that there are no PRI commands available on the Asterisk CLI. We cannot use PRI DEBUG SPAN to determine why port 1 is not receiving or sending calls. Why would this commands be missing? I wonder how those two should interact. The first thing chan_zap tries to do is to open all of its spans. Maybe it has failed there? Try playing with [trunkgroups] to explicitly tell it to only touch the Zaptel spans that are PRI. -- Tzafrir Cohen icq#16849755 jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici [EMAIL PROTECTED] ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI commands missing...
This also happens if zaptel fails to load. Check your messages file. John covici wrote: Well, this happened to me one time when I forgot to compile the pri library before the asterisk! Could you have done that? on Wednesday 10/31/2007 Tzafrir Cohen([EMAIL PROTECTED]) wrote On Wed, Oct 31, 2007 at 12:06:25AM -0600, Carlos Chavez wrote: I have an Asterisk server running Elastix but patched to use Unicall. Everything seems to be working fine and the TE220 card is up and running with port 1 configured as PRI and port 2 as MFC/R2. We can already send and receive calls on port two but we cannot on port one. That is when we noticed that there are no PRI commands available on the Asterisk CLI. We cannot use PRI DEBUG SPAN to determine why port 1 is not receiving or sending calls. Why would this commands be missing? I wonder how those two should interact. The first thing chan_zap tries to do is to open all of its spans. Maybe it has failed there? Try playing with [trunkgroups] to explicitly tell it to only touch the Zaptel spans that are PRI. -- Tzafrir Cohen icq#16849755 jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Thank you and have a wonderful day, Anthony Francis Rockynet VOIP (303) 444-7052 opt 2 [EMAIL PROTECTED] ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI commands missing...
On Wed, 2007-10-31 at 09:41 -0600, Anthony Francis wrote: This also happens if zaptel fails to load. Check your messages file. John covici wrote: Well, this happened to me one time when I forgot to compile the pri library before the asterisk! Could you have done that? Asterisk is working with the second span with Unicall and that would not be possible unless Libpri and Zaptel are already loaded. -- Telecomunicaciones Abiertas de México S.A. de C.V. Carlos Chávez Prats Director de Tecnología +52-55-91169161 ext 2001 signature.asc Description: This is a digitally signed message part ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI commands missing...
On Wed, Oct 31, 2007 at 10:46:42AM -0600, Carlos Chavez wrote: On Wed, 2007-10-31 at 09:41 -0600, Anthony Francis wrote: This also happens if zaptel fails to load. Check your messages file. John covici wrote: Well, this happened to me one time when I forgot to compile the pri library before the asterisk! Could you have done that? Asterisk is working with the second span with Unicall and that would not be possible unless Libpri and Zaptel are already loaded. chan_unicall uses zaptel (the kernel interface) but not chan_zap.so (and not libpri, IIRC). -- Tzafrir Cohen icq#16849755 jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] PRI commands missing...
I have an Asterisk server running Elastix but patched to use Unicall. Everything seems to be working fine and the TE220 card is up and running with port 1 configured as PRI and port 2 as MFC/R2. We can already send and receive calls on port two but we cannot on port one. That is when we noticed that there are no PRI commands available on the Asterisk CLI. We cannot use PRI DEBUG SPAN to determine why port 1 is not receiving or sending calls. Why would this commands be missing? -- Carlos Chavez Director de Tecnología Telecomunicaciones Abiertas de México S.A. de C.V. Tel: +52-55-91169161 Ext 2001 ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI commands missing...
On Wed, Oct 31, 2007 at 12:06:25AM -0600, Carlos Chavez wrote: I have an Asterisk server running Elastix but patched to use Unicall. Everything seems to be working fine and the TE220 card is up and running with port 1 configured as PRI and port 2 as MFC/R2. We can already send and receive calls on port two but we cannot on port one. That is when we noticed that there are no PRI commands available on the Asterisk CLI. We cannot use PRI DEBUG SPAN to determine why port 1 is not receiving or sending calls. Why would this commands be missing? I wonder how those two should interact. The first thing chan_zap tries to do is to open all of its spans. Maybe it has failed there? Try playing with [trunkgroups] to explicitly tell it to only touch the Zaptel spans that are PRI. -- Tzafrir Cohen icq#16849755 jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI commands missing...
This happens when your pri line is down. This has happened a couple of times to me and the pri commands come back when the pri line is up. My guess is that your pri line is down. Hope it helps. Arpit On 10/31/07, Carlos Chavez [EMAIL PROTECTED] wrote: I have an Asterisk server running Elastix but patched to use Unicall. Everything seems to be working fine and the TE220 card is up and running with port 1 configured as PRI and port 2 as MFC/R2. We can already send and receive calls on port two but we cannot on port one. That is when we noticed that there are no PRI commands available on the Asterisk CLI. We cannot use PRI DEBUG SPAN to determine why port 1 is not receiving or sending calls. Why would this commands be missing? -- Carlos Chavez Director de Tecnología Telecomunicaciones Abiertas de México S.A. de C.V. Tel: +52-55-91169161 Ext 2001 ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Arpit Mehta Graduate Student Department of Computer Science Columbia University Tel: 1-646-387-5998 ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI commands missing...
On Wed, Oct 31, 2007 at 02:28:19AM -0400, Arpit Mehta wrote: This happens when your pri line is down. This has happened a couple of times to me and the pri commands come back when the pri line is up. My guess is that your pri line is down. Huh? The 'pri' command is registered by chan_zap.so when built with libpri. It does not become unavailable when no span is around. A span is known to Asterisk even when it is down. -- Tzafrir Cohen icq#16849755 jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
