Re: [asterisk-users] Problems with inbound connection and registering phone
On Tue, May 23, 2023 at 02:24:02PM -0400, Steve Matzura wrote: > I have two problems. The first is that when I dial my number from a phone on > the Internet or any phone outside my LAN, Asterisk does not respond in any > way, which means somehow my system is not picking up the fact that there's > an incoming call to it. > > > The second problem is that I thought I'd try an internal phone to see if I > could get the hello-world stuff working at the least. I thought I'd try > Zoiper, but none of the download buttons at > https://www.zoiper.com/en/voip-softphone/download/current did anything when > clicked, so I set up a spare line on a Yealink TA33 phone that is connected > to another much much older Asterisk implementation running a piece of > amateur radio gear called Allstar. The version of Asterisk used in the > Allstar project is ancient--like 1.4 or 1.6--and the configuration syntax > and options are quite different, so I didn't get lulled into thinking I'd > just clone that configuration on my newer Asterisk implementation. > > > The "Definitive Guide" shows everything about adding phones as SQL > statements, so I made some educated guesses as to what to put into > pjsip.conf. Something's obviously wrong because the phone won't authenticate > (see below). > > > Here's how I set it up in pjsip. > > > [yealink] > transport=udp > type=auth > auth_type=userpass > username=Steve > password=Steve > [yealink] type=aor > [yealink] > type = endpoint > transport = transport-udp > context = phones > disallow = all > allow = ulaw > ; allow=g729 ; uncomment if you support g729 > auth = yealink > aors = yealink > > > Here's how I set it up in extensions: > > > [phones] > exten => 101,1,Dial(PJSIP/yealink) > > Here's the error I get on the Asterisk console: > > > [May 23 13:42:56] NOTICE[45189]: res_pjsip/pjsip_distributor.c:676 > log_failed_request: Request 'REGISTER' from '"Steve" > ' failed for '192.168.1.228:5060' (callid: > 0_1554187534@192.168.1.228) - Failed to authenticate > > > What did I omit? > > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Check out the new Asterisk community forum at: https://community.asterisk.org/ > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- Henning Follmann | hfollm...@itcfollmann.com -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Problems with inbound connection and registering phone
On Tue, 23 May 2023, Steve Matzura wrote: The "Definitive Guide" shows everything about adding phones as SQL statements... I'd look for another guide. -- Thanks in advance, - Steve Edwards sedwa...@sedwards.com Voice: +1-760-468-3867 PST https://www.linkedin.com/in/steve-edwards-4244281 -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Problems with inbound connection and registering phone
On Tue, 23 May 2023, Steve Matzura wrote: ...when I dial my number from a phone on the Internet or any phone outside my LAN, Asterisk does not respond in any way, which means somehow my system is not picking up the fact that there's an incoming call to it. Or that you are not receiving any packets. Enabling SIP debugging in Asterisk can yield clues. `sudo tcpdump -i any -s 0 -v port 5060` can yield more clues. Note that tcpdump sees packets before iptables and Asterisk sees packets after iptables. If you're getting packets, sngrep and wireshark can yield even more clues. -- Thanks in advance, - Steve Edwards sedwa...@sedwards.com Voice: +1-760-468-3867 PST https://www.linkedin.com/in/steve-edwards-4244281 -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Problems with inbound connection and registering phone
I have two problems. The first is that when I dial my number from a phone on the Internet or any phone outside my LAN, Asterisk does not respond in any way, which means somehow my system is not picking up the fact that there's an incoming call to it. The second problem is that I thought I'd try an internal phone to see if I could get the hello-world stuff working at the least. I thought I'd try Zoiper, but none of the download buttons at https://www.zoiper.com/en/voip-softphone/download/current did anything when clicked, so I set up a spare line on a Yealink TA33 phone that is connected to another much much older Asterisk implementation running a piece of amateur radio gear called Allstar. The version of Asterisk used in the Allstar project is ancient--like 1.4 or 1.6--and the configuration syntax and options are quite different, so I didn't get lulled into thinking I'd just clone that configuration on my newer Asterisk implementation. The "Definitive Guide" shows everything about adding phones as SQL statements, so I made some educated guesses as to what to put into pjsip.conf. Something's obviously wrong because the phone won't authenticate (see below). Here's how I set it up in pjsip. [yealink] transport=udp type=auth auth_type=userpass username=Steve password=Steve [yealink] type = endpoint transport = transport-udp context = phones disallow = all allow = ulaw ; allow=g729 ; uncomment if you support g729 auth = yealink aors = yealink Here's how I set it up in extensions: [phones] exten => 101,1,Dial(PJSIP/yealink) Here's the error I get on the Asterisk console: [May 23 13:42:56] NOTICE[45189]: res_pjsip/pjsip_distributor.c:676 log_failed_request: Request 'REGISTER' from '"Steve" ' failed for '192.168.1.228:5060' (callid: 0_1554187534@192.168.1.228) - Failed to authenticate What did I omit? -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
