Re: [asterisk-users] Problems with outgoing calls
On 11 Sep 2006, at 10:29, Roy Gardner wrote: Hi, Our setup is: Asterisk 1.0.7 running on Debian 2.4.27-2-386 TE110P card ISDN 30 (UK E1 PRI) When making outgoing calls to the PSTN using call files I get the following problems: 1. No hangup detection - have to wait for time-out 2. No pickup detection - the dial-plan starts as soon as the line rings All solutions I have read seem to be based on the assumption that a X100P card is being used with analogue lines. Any help on this would be much appreciated. I have a _very_ similar setup and have not seen the problem you describe. Differences are: 1) Asterisk 1.2.9 (But I was running 1.0.9 for a long time) 2) NTL's PRI - I assume you are on BT. None the less, it should work. Do you have call files and CLI verbose output we can look at ? Tim Panton www.mexuar.com ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Problems with outgoing calls
Hi,Our setup is:Asterisk 1.0.7 running on Debian 2.4.27-2-386TE110P cardISDN 30 (UK E1 PRI)When making outgoing calls to the PSTN using call files I get the following problems:1. No hangup detection - have to wait for time-out2. No pickup detection - the dial-plan starts as soon as the line ringsAll solutions I have read seem to be based on the assumption that a X100P card is being used with analogue lines.Any help on this would be much appreciated. Dr Roy GardnerDirectorwww.psycle.comTel: 01948 780120Mob: 07713 985657 ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Problems with outgoing calls on a TE410P
I'm not a guru,but it could help if you post the dialled number as well as your extensions.conf.On 8/16/06, Nils Rasmussen < [EMAIL PROTECTED]> wrote: We make a call from a PBX through asterisk to ISDN (E1) Denmark. We use asterisk to record incoming and outgoing calls Sometimes we experience that a outgoing call doesn't get through. In the message.log we get WARNING[7594] app_dial.c: Unable to forward voice In the Master.csv we get source number but in the destination number we get a "t" and not the dialled number. Does Anyone have experience or ideas to solve this problem. Med venlig hilsen Nils Rasmussen ___--Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing listTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users-- Com os melhores cumprimentos,Marco Mouta ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Problems with outgoing calls on a TE410P
We make a call from a PBX through asterisk to ISDN (E1) Denmark. We use asterisk to record incoming and outgoing calls Sometimes we experience that a outgoing call doesn’t get through. In the message.log we get WARNING[7594] app_dial.c: Unable to forward voice In the Master.csv we get source number but in the destination number we get a “t” and not the dialled number. Does Anyone have experience or ideas to solve this problem. Med venlig hilsen Nils Rasmussen ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Problems with outgoing calls
> >I have a call generation script (very simple) to generate > >call load for testing, if that's what you're trying to accomplish. > It's > >good for generating huge call volumes for IVR testing. > >Let me know if you need it! I would be interested in the script. If it is small, maybe you could post it to share on the list? Thanks, Kevin ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Problems with outgoing calls
Thanks Scott, but I already have a script that creates a call-load. That's how I have found the "OutgoingSpoolFailed" error and the other error with calls being retried without waiting to their retry time. Has anybody found this problem? Robert T. From: "Scott Stingel" <[EMAIL PROTECTED]> Date: Fri, 26 Dec 2003 13:44:18 - I have a call generation script (very simple) to generate call load for testing, if that's what you're trying to accomplish. It's good for generating huge call volumes for IVR testing. Let me know if you need it! _ Reserva y planifica tu viaje online. http://www.msn.es/Viajes/ ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Problems with outgoing calls
Hi- As far as problem 2 is concerned, asterisk should have no problem with that call rate- one call per second, as long as the first call on a particular channel is complete before you initiate another on that same channel. I have had problems trying to initiate more than about 15 calls (on different channels) at exactly the same time, and find I have to stagger the starts a bit. I have a call generation script (very simple) to generate call load for testing, if that's what you're trying to accomplish. It's good for generating huge call volumes for IVR testing. Let me know if you need it! Scott M. Stingel Emerging Voice Technology Inc. Email: scott "at" evtmedia.com URL:www.evtmedia.com > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Asterisk List > Sent: Friday, December 26, 2003 11:58 AM > To: [EMAIL PROTECTED] > Subject: [Asterisk-Users] Problems with outgoing calls > > > Hello: > > I have found the following problems with outgoing calls with > asterisk, > compiled with an updated CVS on 22 Oct. > > 1.- Problem with retries: > Whenever I set the MaxRetries parameter, to something greater > than 0 in a > call-fille, Asterisk ignores the RetryTime parameter and > retries every file > in the outgoing folder when a new call-file is copied into > that folder. > So, if I make a call placing a call-file in the outgoing > folder, nobody > answers and my call-file stays in the outgoing folder waiting for > 'RetryTime' seconds (say 120 seconds), if another call-file > is placed in the > outgoing folder the previous call is retried inmediately before the > RetryTime finishes. > > 2.- Problem with high-volume calls: > When I put lots of call-files in then outgoing folder, from > time to time > asterisk show an error in Master.csv. The error is > OutgoingSpoolFailed, and > shows no info about the call, just "failed" as the extension. > I move one > call-file every second, but for several minutes. > > How can I avoid this two problems? > > Thanks in advance, > Robert T. > > _ > Entra de visita en las decenas de tiendas del nuevo MSN > Compras. Compara los > precios antes de comprar. http://www.msn.es/compras/ > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Problems with outgoing calls
Hello: I have found the following problems with outgoing calls with asterisk, compiled with an updated CVS on 22 Oct. 1.- Problem with retries: Whenever I set the MaxRetries parameter, to something greater than 0 in a call-fille, Asterisk ignores the RetryTime parameter and retries every file in the outgoing folder when a new call-file is copied into that folder. So, if I make a call placing a call-file in the outgoing folder, nobody answers and my call-file stays in the outgoing folder waiting for 'RetryTime' seconds (say 120 seconds), if another call-file is placed in the outgoing folder the previous call is retried inmediately before the RetryTime finishes. 2.- Problem with high-volume calls: When I put lots of call-files in then outgoing folder, from time to time asterisk show an error in Master.csv. The error is OutgoingSpoolFailed, and shows no info about the call, just "failed" as the extension. I move one call-file every second, but for several minutes. How can I avoid this two problems? Thanks in advance, Robert T. _ Entra de visita en las decenas de tiendas del nuevo MSN Compras. Compara los precios antes de comprar. http://www.msn.es/compras/ ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users