Re: [asterisk-users] QueueMemberStatus
On Wed, Jul 9, 2008 at 12:00 AM, Jason Dixon [EMAIL PROTECTED] wrote: On Tue, Jul 08, 2008 at 11:00:43AM -0400, Jason Dixon wrote: On Tue, Jul 08, 2008 at 12:10:05PM +1200, Matt Riddell wrote: Action: Command Command: show queue my_queue_name ActionID: my_queue_name_12345 This does not appear to show the correct status of an extension. It appears that ExtensionState also always reports Status of -1. Are there any Actions or Commands that will report the correct status of an extension? So far the only accurate representation I've found of queue members has been the following. $ sudo /usr/sbin/asterisk -r -x show channels | grep '^SIP' SIP/241-b742e010 [EMAIL PROTECTED]:2Ring Dial(Zap/G1/411) $ sudo /usr/sbin/asterisk -r -x show queue support_queue | grep SIP SIP/207 (Ringing) has taken no calls yet SIP/203 (Not in use) has taken no calls yet SIP/202 (In use) has taken no calls yet SIP/201 (Not in use) has taken no calls yet All of the commands I've tried via the AGI have yielded incorrect results. If this sounds wrong, please let me know and I'll resume beating my head against the nearest wall. :) There is QUEUE_MEMBER_COUNT (in 1.4) and QUEUE_MEMBER (in 1.6) dialplan functions which allows to get count of members (in 1.6 also count of free / logged in members). You can use GetVar to evaluate that. Regards, Atis -- Atis Lezdins, VoIP Project Manager / Developer, [EMAIL PROTECTED] Skype: atis.lezdins Cell Phone: +371 28806004 Cell Phone: +1 800 7300689 Work phone: +1 800 7502835 ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] QueueMemberStatus
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Jason Dixon wrote: On Tue, Jul 08, 2008 at 11:00:43AM -0400, Jason Dixon wrote: On Tue, Jul 08, 2008 at 12:10:05PM +1200, Matt Riddell wrote: Action: Command Command: show queue my_queue_name ActionID: my_queue_name_12345 This does not appear to show the correct status of an extension. It appears that ExtensionState also always reports Status of -1. Are there any Actions or Commands that will report the correct status of an extension? So far the only accurate representation I've found of queue members has been the following. $ sudo /usr/sbin/asterisk -r -x show channels | grep '^SIP' SIP/241-b742e010 [EMAIL PROTECTED]:2Ring Dial(Zap/G1/411) $ sudo /usr/sbin/asterisk -r -x show queue support_queue | grep SIP SIP/207 (Ringing) has taken no calls yet SIP/203 (Not in use) has taken no calls yet SIP/202 (In use) has taken no calls yet SIP/201 (Not in use) has taken no calls yet All of the commands I've tried via the AGI have yielded incorrect results. If this sounds wrong, please let me know and I'll resume beating my head against the nearest wall. :) Looks correct. - -- Kind Regards, Matt Riddell Director ___ http://www.venturevoip.com (Great new VoIP end to end solution) http://www.venturevoip.com/news.php (Daily Asterisk News - html) http://www.venturevoip.com/newrssfeed.php (Daily Asterisk News - rss) -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.7 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFIfVfuDQNt8rg0Kp4RAhsdAKCDJ6ya2YJPpSBxPemi88mV9sUf5gCfSNg0 i/cHg7W3yYGL8apTWBejPts= =6pTt -END PGP SIGNATURE- ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] QueueMemberStatus
On Tue, Jul 08, 2008 at 12:10:05PM +1200, Matt Riddell wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Jason Dixon wrote: On Tue, Jul 08, 2008 at 12:32:17AM +0200, Philipp Kempgen wrote: Jason Dixon schrieb: I'm trying to get some useful status info on Asterisk queues. Using the Asterisk::Manager perl module, I've attempted to gather Queues and QueueStatus, but neither are useful. In fact, Queues only returns one out of four possible queues. I found references online to QueueMemberStatus, which is enabled by 'eventmemberstatus = yes' in queues.conf. I've enabled this, but I get invalid command errors through the Manager or the CLI. QueueMemberStatus is not an action (= command) but an event. Below I've pasted dumps of each Action (QueueMemberStatus, QueueStatus, Queues). If anyone can offer some alternative suggestions on how to query the number of free extensions in a queue, I'm all ears. Query the ExtensionState of each of the queue members. This makes a lot of sense. But rather than query the ExtensionState of all members, is there a simple way to query the number of free members for a particular queue? Action: Command Command: show queue my_queue_name ActionID: my_queue_name_12345 This does not appear to show the correct status of an extension. It appears that ExtensionState also always reports Status of -1. Are there any Actions or Commands that will report the correct status of an extension? Thanks, -- Jason Dixon OmniTI Computer Consulting, Inc. [EMAIL PROTECTED] 443.325.1357 x.241 ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] QueueMemberStatus
On Tue, Jul 08, 2008 at 11:00:43AM -0400, Jason Dixon wrote: On Tue, Jul 08, 2008 at 12:10:05PM +1200, Matt Riddell wrote: Action: Command Command: show queue my_queue_name ActionID: my_queue_name_12345 This does not appear to show the correct status of an extension. It appears that ExtensionState also always reports Status of -1. Are there any Actions or Commands that will report the correct status of an extension? So far the only accurate representation I've found of queue members has been the following. $ sudo /usr/sbin/asterisk -r -x show channels | grep '^SIP' SIP/241-b742e010 [EMAIL PROTECTED]:2Ring Dial(Zap/G1/411) $ sudo /usr/sbin/asterisk -r -x show queue support_queue | grep SIP SIP/207 (Ringing) has taken no calls yet SIP/203 (Not in use) has taken no calls yet SIP/202 (In use) has taken no calls yet SIP/201 (Not in use) has taken no calls yet All of the commands I've tried via the AGI have yielded incorrect results. If this sounds wrong, please let me know and I'll resume beating my head against the nearest wall. :) Thanks, -- Jason Dixon OmniTI Computer Consulting, Inc. [EMAIL PROTECTED] 443.325.1357 x.241 ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] QueueMemberStatus
I'm trying to get some useful status info on Asterisk queues. Using the
Asterisk::Manager perl module, I've attempted to gather Queues and
QueueStatus, but neither are useful. In fact, Queues only returns one
out of four possible queues.
I found references online to QueueMemberStatus, which is enabled by
'eventmemberstatus = yes' in queues.conf. I've enabled this, but I
get invalid command errors through the Manager or the CLI. Below I've
pasted dumps of each Action (QueueMemberStatus, QueueStatus, Queues).
If anyone can offer some alternative suggestions on how to query the
number of free extensions in a queue, I'm all ears.
$VAR1 = {
'Message' = 'Invalid/unknown command',
'Response' = 'Error'
};
$VAR1 = {
'Message' = 'Queue status will follow',
'Response' = 'Success'
};
$VAR1 = {
'Completed' = '',
'Holdtime' = '',
'Event' = 'QueueParams',
'ServicelevelPerf' = '0.0',
'Calls' = '',
'Queue' = 'support_queue',
'Weight' = '',
'ServiceLevel' = '',
'Abandoned' = '',
'Max' = ''
};
Thanks,
--
Jason Dixon
OmniTI Computer Consulting, Inc.
[EMAIL PROTECTED]
443.325.1357 x.241
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] QueueMemberStatus
Jason Dixon wrote:
I'm trying to get some useful status info on Asterisk queues. Using the
Asterisk::Manager perl module, I've attempted to gather Queues and
QueueStatus, but neither are useful. In fact, Queues only returns one
out of four possible queues.
I found references online to QueueMemberStatus, which is enabled by
'eventmemberstatus = yes' in queues.conf. I've enabled this, but I
get invalid command errors through the Manager or the CLI. Below I've
pasted dumps of each Action (QueueMemberStatus, QueueStatus, Queues).
If anyone can offer some alternative suggestions on how to query the
number of free extensions in a queue, I'm all ears.
$VAR1 = {
'Message' = 'Invalid/unknown command',
'Response' = 'Error'
};
$VAR1 = {
'Message' = 'Queue status will follow',
'Response' = 'Success'
};
$VAR1 = {
'Completed' = '',
'Holdtime' = '',
'Event' = 'QueueParams',
'ServicelevelPerf' = '0.0',
'Calls' = '',
'Queue' = 'support_queue',
'Weight' = '',
'ServiceLevel' = '',
'Abandoned' = '',
'Max' = ''
};
Thanks,
QueueMemberStatus is a manager event, not an action. The event is sent every
time that a member's status changes by default. By setting
eventmemberstatus=no,
these events will not be sent out.
The QueueStatus action causes QueueMember, QueueParams, and QueueEntry events
to
be sent out when executed. These should give information about the queue whose
status has been queried. I'm not sure how the Asterisk::Manager perl module
works, but if you can be watching for these events somehow, you should see them.
As for the final command, Queues, the output you gave would make sense if there
are no members in the queue, no callers had been handled yet, and there was no
weight or maxlen set in queues.conf. I'm not sure if that's the case in this
scenario or not.
Mark Michelson
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] QueueMemberStatus
Jason Dixon schrieb: I'm trying to get some useful status info on Asterisk queues. Using the Asterisk::Manager perl module, I've attempted to gather Queues and QueueStatus, but neither are useful. In fact, Queues only returns one out of four possible queues. I found references online to QueueMemberStatus, which is enabled by 'eventmemberstatus = yes' in queues.conf. I've enabled this, but I get invalid command errors through the Manager or the CLI. QueueMemberStatus is not an action (= command) but an event. Below I've pasted dumps of each Action (QueueMemberStatus, QueueStatus, Queues). If anyone can offer some alternative suggestions on how to query the number of free extensions in a queue, I'm all ears. Query the ExtensionState of each of the queue members. Grüße, Philipp Kempgen -- http://www.das-asterisk-buch.de - http://www.the-asterisk-book.com Amooma GmbH - Bachstr. 126 - 56566 Neuwied - http://www.amooma.de Geschäftsführer: Stefan Wintermeyer, Handelsregister: Neuwied B14998 ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] QueueMemberStatus
On Tue, Jul 08, 2008 at 12:32:17AM +0200, Philipp Kempgen wrote: Jason Dixon schrieb: I'm trying to get some useful status info on Asterisk queues. Using the Asterisk::Manager perl module, I've attempted to gather Queues and QueueStatus, but neither are useful. In fact, Queues only returns one out of four possible queues. I found references online to QueueMemberStatus, which is enabled by 'eventmemberstatus = yes' in queues.conf. I've enabled this, but I get invalid command errors through the Manager or the CLI. QueueMemberStatus is not an action (= command) but an event. Below I've pasted dumps of each Action (QueueMemberStatus, QueueStatus, Queues). If anyone can offer some alternative suggestions on how to query the number of free extensions in a queue, I'm all ears. Query the ExtensionState of each of the queue members. This makes a lot of sense. But rather than query the ExtensionState of all members, is there a simple way to query the number of free members for a particular queue? Thanks, -- Jason Dixon OmniTI Computer Consulting, Inc. [EMAIL PROTECTED] 443.325.1357 x.241 ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] QueueMemberStatus
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Jason Dixon wrote: On Tue, Jul 08, 2008 at 12:32:17AM +0200, Philipp Kempgen wrote: Jason Dixon schrieb: I'm trying to get some useful status info on Asterisk queues. Using the Asterisk::Manager perl module, I've attempted to gather Queues and QueueStatus, but neither are useful. In fact, Queues only returns one out of four possible queues. I found references online to QueueMemberStatus, which is enabled by 'eventmemberstatus = yes' in queues.conf. I've enabled this, but I get invalid command errors through the Manager or the CLI. QueueMemberStatus is not an action (= command) but an event. Below I've pasted dumps of each Action (QueueMemberStatus, QueueStatus, Queues). If anyone can offer some alternative suggestions on how to query the number of free extensions in a queue, I'm all ears. Query the ExtensionState of each of the queue members. This makes a lot of sense. But rather than query the ExtensionState of all members, is there a simple way to query the number of free members for a particular queue? Action: Command Command: show queue my_queue_name ActionID: my_queue_name_12345 Or just show queues. Bear in mind that if you want to do show queues as opposed to show queue and you are using a realtime queue which has not been used, you will need to type show queue my_queue_name first before it will show up in show queues. - -- Kind Regards, Matt Riddell Director ___ http://www.venturevoip.com (Great new VoIP end to end solution) http://www.venturevoip.com/news.php (Daily Asterisk News - html) http://www.venturevoip.com/newrssfeed.php (Daily Asterisk News - rss) -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.7 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFIcrBdDQNt8rg0Kp4RAkhQAJ44LZomYhLNYRBKc4th1mG3ecfjGQCgo9vd ZvIBFNBfG/X69WxF4FkCxKw= =dbQ2 -END PGP SIGNATURE- ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] QueueMemberStatus
Lee Jenkins wrote: I've been poking for the definition of QueueMemberStatus and all the source file indicates is that it is a integer member of the member structure. Anyone know where I can find the CONSTANTS definitions? OK, I didn't know this, but QueueMemberStatus returns the same codes for channel status as defined in devicestate.h. -- Warm Regards, Lee ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] QueueMemberStatus
I've been poking for the definition of QueueMemberStatus and all the source file indicates is that it is a integer member of the member structure. Anyone know where I can find the CONSTANTS definitions? -- Warm Regards, Lee ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] QueueMemberStatus/Status Field
Lee Jenkins wrote: Hi all, Where can I find the status definitions for the status field below? Googled /web/voip-info.org and can't seem to find anything. Event: QueueMemberStatus Privilege: agent,all Queue: support Location: SIP/111 Membership: dynamic Penalty: 0 CallsTaken: 0 LastCall: 0 Status: 1 Paused: 0 I was looking for something unrelated and ran across this little gem. http://www.asteriskpbx.org/doxygen/trunk/devicestate_8h.html#4c79ce1f0eb3c1ce7c15439c63c87a34 or http://preview.tinyurl.com/2pgcwp -- Warm Regards, Lee ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] QueueMemberStatus/Status Field
Hi all, Where can I find the status definitions for the status field below? Googled /web/voip-info.org and can't seem to find anything. Event: QueueMemberStatus Privilege: agent,all Queue: support Location: SIP/111 Membership: dynamic Penalty: 0 CallsTaken: 0 LastCall: 0 Status: 1 Paused: 0 Thank you! -- Warm Regards, Lee ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] queuememberstatus overwhelms manager socket connection to asterisk
I have a test application, what it does is just connect to the asterisk manager,and listen for events. I also set the connection to receive on user, call and agent events.I Noticed that everytime the queue is empty, asterisk tends to throw too many queuememberstatus events, overwhelming the connection and therefore closesit abruptly.I also got the same result when I used telnet to connect to asterisk, and then make a call which is then forwarded to an empty queue. I'm using version 1.2.7.1 and even if the queue has its eventwhencalled set to no, the problem still persists. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
