Zeeshan Zakaria wrote:
I upgraded from Tormenta2 to Sangoma A101. I followed the instructions,
and installation was successful. zttool, ztcfg, all show card is
installed properly. I copied the parameters from my old working
zaptel.conf, zapata.conf and zapata-auto.conf. Verified on Sangoma
website that these files are correct. Also configured wanpipe1.conf.
But doing all this didn't start the PRI channels. It says 'no PRI
configured on span 1' on Asterisk CLI on typing 'pri show span 1'.
What am I missing here?
--
Zeeshan A Zakaria
Hi,
This is my .conf files (edited for brevity)
zaptel.conf
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
zapata.conf
switchtype=euroisdn
group=0
context=inbound
signalling=pri_net
;group=1
callerid=asreceived
channel = 1-15,17-31
wanpipe1.conf
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort= PRI
AUTO_PCISLOT= NO
PCISLOT = 1
PCIBUS = 3
FE_MEDIA= E1
FE_LCODE= HDB3
FE_FRAME= NCRC4
FE_LINE = 1
TE_CLOCK= NORMAL
ACTIVE_CH = ALL
TE_HIGHIMPEDANCE= NO
INTERFACE = V35
CLOCKING= EXTERNAL
BaudRate= 0
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
[w1g1]
PROTOCOL= HDLC
HDLC_STREAMING = NO
ACTIVE_CH = ALL
IDLE_FLAG = 0x7E
MTU = 1500
MRU = 1500
TDMV_SPAN = 1
TDMV_ECHO_OFF = NO
MULTICAST = NO
TRUE_ENCODING_TYPE = NO
[EMAIL PROTECTED] ~]# wanrouter status
Devices currently active:
wanpipe1
Wanpipe Config:
Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate |
wanpipe1| N/A | A101/2 | 201 | 1 | 1| EXT | 0 |
Wanrouter Status:
Device name | Protocol | Station | Status|
wanpipe1| AFT HDLC | N/A | Connected |
[EMAIL PROTECTED] ~]# wanrouter hwprobe
---
| Wanpipe Hardware Probe Info |
---
1 . AFT-A101u : SLOT=1 : BUS=3 : IRQ=201 : CPU=A : PORT=PRI
Card Cnt: S508=0 S514X=0 S518=0 A101-2=1 A104=0 A300=0
ecnboksburg*CLI zap show status
Description Alarms IRQbpviol CRC4
wanpipe1 card 0 OK 0 0 0
--
thanks,
yusuf
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
