[asterisk-users] Sangoma card dying after 1hour
Hello List I am having a rather big problem with a sangoma A104 card, I just installed to replace a Digium TE410 card, that was acting up. But now we have a problem with the sangoma card. It runs great after being started, and calls proceed as normal, but after about 1 hour, it stops being able to make and receive calls. If I run wanpipemon debug, can see that the card still receives packets from the ISDN, but when I make a call, I cant see it in wanpipemon, and asterisk just responds with a: NOTICE[17240] app_dial.c: Unable to create channel of type 'Zap' (cause 34 - Circuit/channel congestion) I am pretty shure that this is a configuration issue, but are there anything I need to be aware of when moving from a Digium card to a sangoma card? Kind Regards Jon Leren Schøpzinsky ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Sangoma card dying after 1hour
On 1/26/07, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: Hello List I am having a rather big problem with a sangoma A104 card, I just installed to replace a Digium TE410 card, that was acting up. But now we have a problem with the sangoma card. It runs great after being started, and calls proceed as normal, but after about 1 hour, it stops being able to make and receive calls. If I run wanpipemon debug, can see that the card still receives packets from the ISDN, but when I make a call, I cant see it in wanpipemon, and asterisk just responds with a: NOTICE[17240] app_dial.c: Unable to create channel of type 'Zap' (cause 34 - Circuit/channel congestion) I am pretty shure that this is a configuration issue, but are there anything I need to be aware of when moving from a Digium card to a sangoma card? Which wanpipe version? Anything lower than 2.3.4-4 should be upgraded as there are some resource leak fixes in that version. Regards, Steve ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] Sangoma card dying after 1hour
I am running the newest version, from the sangoma wiki. Jon -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Davies Sent: 26. januar 2007 10:56 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Sangoma card dying after 1hour On 1/26/07, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: > > Hello List > > I am having a rather big problem with a sangoma A104 card, I just installed > to replace a Digium TE410 card, that was acting up. > > But now we have a problem with the sangoma card. It runs great after being > started, and calls proceed as normal, but after about 1 hour, it stops being > able to make and receive calls. > > If I run wanpipemon debug, can see that the card still receives packets > from the ISDN, but when I make a call, I cant see it in wanpipemon, and > asterisk just responds with a: > > NOTICE[17240] app_dial.c: Unable to create channel of type 'Zap' (cause 34 - > Circuit/channel congestion) > > I am pretty shure that this is a configuration issue, but are there anything > I need to be aware of when moving from a Digium card to a sangoma card? Which wanpipe version? Anything lower than 2.3.4-4 should be upgraded as there are some resource leak fixes in that version. Regards, Steve ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Sangoma card dying after 1hour
Which asterisk versions etc etc? On 1/26/07, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: I am running the newest version, from the sangoma wiki. Jon -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Davies Sent: 26. januar 2007 10:56 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Sangoma card dying after 1hour On 1/26/07, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: > > Hello List > > I am having a rather big problem with a sangoma A104 card, I just installed > to replace a Digium TE410 card, that was acting up. > > But now we have a problem with the sangoma card. It runs great after being > started, and calls proceed as normal, but after about 1 hour, it stops being > able to make and receive calls. > > If I run wanpipemon debug, can see that the card still receives packets > from the ISDN, but when I make a call, I cant see it in wanpipemon, and > asterisk just responds with a: > > NOTICE[17240] app_dial.c: Unable to create channel of type 'Zap' (cause 34 - > Circuit/channel congestion) > > I am pretty shure that this is a configuration issue, but are there anything > I need to be aware of when moving from a Digium card to a sangoma card? Which wanpipe version? Anything lower than 2.3.4-4 should be upgraded as there are some resource leak fixes in that version. Regards, Steve ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] Sangoma card dying after 1hour
Could it be related to this? http://bugs.digium.com/view.php?id=8507 Did you try to contact Sangoma Support? Their replies are prompt. Regards, Alex -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Davies Sent: Friday, January 26, 2007 12:03 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Sangoma card dying after 1hour Which asterisk versions etc etc? On 1/26/07, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: > I am running the newest version, from the sangoma wiki. > > Jon > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Davies > Sent: 26. januar 2007 10:56 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Sangoma card dying after 1hour > > On 1/26/07, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: > > > > Hello List > > > > I am having a rather big problem with a sangoma A104 card, I just installed > > to replace a Digium TE410 card, that was acting up. > > > > But now we have a problem with the sangoma card. It runs great after being > > started, and calls proceed as normal, but after about 1 hour, it stops being > > able to make and receive calls. > > > > If I run wanpipemon debug, can see that the card still receives packets > > from the ISDN, but when I make a call, I cant see it in wanpipemon, and > > asterisk just responds with a: > > > > NOTICE[17240] app_dial.c: Unable to create channel of type 'Zap' (cause 34 - > > Circuit/channel congestion) > > > > I am pretty shure that this is a configuration issue, but are there anything > > I need to be aware of when moving from a Digium card to a sangoma card? > > Which wanpipe version? Anything lower than 2.3.4-4 should be upgraded > as there are some resource leak fixes in that version. > > Regards, > Steve > ___ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] Sangoma card dying after 1hour
Asterisk is version 1.2.14, zaptel 1.2.12, libpri is whatever version was with zaptel 1.2.12 :) Jon -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Davies Sent: 26. januar 2007 12:03 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Sangoma card dying after 1hour Which asterisk versions etc etc? On 1/26/07, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: > I am running the newest version, from the sangoma wiki. > > Jon > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Davies > Sent: 26. januar 2007 10:56 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Sangoma card dying after 1hour > > On 1/26/07, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: > > > > Hello List > > > > I am having a rather big problem with a sangoma A104 card, I just installed > > to replace a Digium TE410 card, that was acting up. > > > > But now we have a problem with the sangoma card. It runs great after being > > started, and calls proceed as normal, but after about 1 hour, it stops being > > able to make and receive calls. > > > > If I run wanpipemon debug, can see that the card still receives packets > > from the ISDN, but when I make a call, I cant see it in wanpipemon, and > > asterisk just responds with a: > > > > NOTICE[17240] app_dial.c: Unable to create channel of type 'Zap' (cause 34 - > > Circuit/channel congestion) > > > > I am pretty shure that this is a configuration issue, but are there anything > > I need to be aware of when moving from a Digium card to a sangoma card? > > Which wanpipe version? Anything lower than 2.3.4-4 should be upgraded > as there are some resource leak fixes in that version. > > Regards, > Steve > ___ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] Sangoma card dying after 1hour
Do you see anything in /var/log/messages? I am having a similar problem but I'm also getting some "pci fatal error!" messages. I had sangoma connect to the box and he couldn't find any config errors so we're leaning towards a hardware problem. - Jeremy -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jon Schøpzinsky Sent: Friday, January 26, 2007 7:21 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [asterisk-users] Sangoma card dying after 1hour Asterisk is version 1.2.14, zaptel 1.2.12, libpri is whatever version was with zaptel 1.2.12 :) Jon -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Davies Sent: 26. januar 2007 12:03 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Sangoma card dying after 1hour Which asterisk versions etc etc? On 1/26/07, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: > I am running the newest version, from the sangoma wiki. > > Jon > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Steve > Davies > Sent: 26. januar 2007 10:56 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Sangoma card dying after 1hour > > On 1/26/07, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: > > > > Hello List > > > > I am having a rather big problem with a sangoma A104 card, I just > > installed to replace a Digium TE410 card, that was acting up. > > > > But now we have a problem with the sangoma card. It runs great after > > being started, and calls proceed as normal, but after about 1 hour, > > it stops being able to make and receive calls. > > > > If I run wanpipemon debug, can see that the card still receives > > packets from the ISDN, but when I make a call, I cant see it in > > wanpipemon, and asterisk just responds with a: > > > > NOTICE[17240] app_dial.c: Unable to create channel of type 'Zap' > > (cause 34 - Circuit/channel congestion) > > > > I am pretty shure that this is a configuration issue, but are there > > anything I need to be aware of when moving from a Digium card to a sangoma > > card? > > Which wanpipe version? Anything lower than 2.3.4-4 should be upgraded > as there are some resource leak fixes in that version. > > Regards, > Steve > ___ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Sangoma card dying after 1hour
what kinda of cable are you using to connect to the e1. isit shielded or just the generic one they give with the card? On 1/28/07, Porier, Jeremy M. <[EMAIL PROTECTED]> wrote: Do you see anything in /var/log/messages? I am having a similar problem but I'm also getting some "pci fatal error!" messages. I had sangoma connect to the box and he couldn't find any config errors so we're leaning towards a hardware problem. - Jeremy -Original Message- From: [EMAIL PROTECTED] [mailto: [EMAIL PROTECTED] On Behalf Of Jon Schøpzinsky Sent: Friday, January 26, 2007 7:21 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [asterisk-users] Sangoma card dying after 1hour Asterisk is version 1.2.14, zaptel 1.2.12, libpri is whatever version was with zaptel 1.2.12 :) Jon -Original Message- From: [EMAIL PROTECTED] [mailto: [EMAIL PROTECTED] On Behalf Of Steve Davies Sent: 26. januar 2007 12:03 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Sangoma card dying after 1hour Which asterisk versions etc etc? On 1/26/07, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: > I am running the newest version, from the sangoma wiki. > > Jon > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Steve > Davies > Sent: 26. januar 2007 10:56 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Sangoma card dying after 1hour > > On 1/26/07, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: > > > > Hello List > > > > I am having a rather big problem with a sangoma A104 card, I just > > installed to replace a Digium TE410 card, that was acting up. > > > > But now we have a problem with the sangoma card. It runs great after > > being started, and calls proceed as normal, but after about 1 hour, > > it stops being able to make and receive calls. > > > > If I run wanpipemon debug, can see that the card still receives > > packets from the ISDN, but when I make a call, I cant see it in > > wanpipemon, and asterisk just responds with a: > > > > NOTICE[17240] app_dial.c: Unable to create channel of type 'Zap' > > (cause 34 - Circuit/channel congestion) > > > > I am pretty shure that this is a configuration issue, but are there > > anything I need to be aware of when moving from a Digium card to a sangoma card? > > Which wanpipe version? Anything lower than 2.3.4-4 should be upgraded > as there are some resource leak fixes in that version. > > Regards, > Steve > ___ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] Sangoma card dying after 1hour
We made our own, but it isn't shielded. Is there something specific to sangoma regarding cabling? We've made our own for Digium and Nortel equipment and all is well. - Jeremy From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rosli Sukri Sent: Sunday, January 28, 2007 1:04 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Sangoma card dying after 1hour what kinda of cable are you using to connect to the e1. isit shielded or just the generic one they give with the card? On 1/28/07, Porier, Jeremy M. < [EMAIL PROTECTED]> wrote: Do you see anything in /var/log/messages? I am having a similar problem but I'm also getting some "pci fatal error!" messages. I had sangoma connect to the box and he couldn't find any config errors so we're leaning towards a hardware problem. - Jeremy -Original Message- From: [EMAIL PROTECTED] [mailto: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> ] On Behalf Of Jon Schøpzinsky Sent: Friday, January 26, 2007 7:21 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [asterisk-users] Sangoma card dying after 1hour Asterisk is version 1.2.14, zaptel 1.2.12, libpri is whatever version was with zaptel 1.2.12 :) Jon -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Davies Sent: 26. januar 2007 12:03 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Sangoma card dying after 1hour Which asterisk versions etc etc? On 1/26/07, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: > I am running the newest version, from the sangoma wiki. > > Jon > > -Original Message- > From: [EMAIL PROTECTED] > [mailto: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> ] On Behalf Of Steve > Davies > Sent: 26. januar 2007 10:56 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Sangoma card dying after 1hour > > On 1/26/07, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: > > > > Hello List > > > > I am having a rather big problem with a sangoma A104 card, I just > > installed to replace a Digium TE410 card, that was acting up. > > > > But now we have a problem with the sangoma card. It runs great after > > being started, and calls proceed as normal, but after about 1 hour, > > it stops being able to make and receive calls. > > > > If I run wanpipemon debug, can see that the card still receives > > packets from the ISDN, but when I make a call, I cant see it in > > wanpipemon, and asterisk just responds with a: > > > > NOTICE[17240] app_dial.c: Unable to create channel of type 'Zap' > > (cause 34 - Circuit/channel congestion) > > > > I am pretty shure that this is a configuration issue, but are there > > anything I need to be aware of when moving from a Digium card to a sangoma card? > > Which wanpipe version? Anything lower than 2.3.4-4 should be upgraded > as there are some resource leak fixes in that version. > > Regards, > Steve > ___ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk
Re: [asterisk-users] Sangoma card dying after 1hour
try it out with shielded... we got the same problem previously, we resorted to making a short cable and wrapping it up with cooking foil and the problem appears no more On 1/29/07, Porier, Jeremy M. <[EMAIL PROTECTED]> wrote: We made our own, but it isn't shielded. Is there something specific to sangoma regarding cabling? We've made our own for Digium and Nortel equipment and all is well. - Jeremy -- *From:* [EMAIL PROTECTED] [mailto: [EMAIL PROTECTED] *On Behalf Of *Rosli Sukri *Sent:* Sunday, January 28, 2007 1:04 AM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] Sangoma card dying after 1hour what kinda of cable are you using to connect to the e1. isit shielded or just the generic one they give with the card? On 1/28/07, Porier, Jeremy M. < [EMAIL PROTECTED]> wrote: > > Do you see anything in /var/log/messages? I am having a similar problem > but I'm also getting some "pci fatal error!" messages. I had sangoma > connect to the box and he couldn't find any config errors so we're leaning > towards a hardware problem. > > - Jeremy > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Jon Schøpzinsky > Sent: Friday, January 26, 2007 7:21 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [asterisk-users] Sangoma card dying after 1hour > > Asterisk is version 1.2.14, zaptel 1.2.12, libpri is whatever version > was with zaptel 1.2.12 :) > > Jon > > -Original Message- > From: [EMAIL PROTECTED] [mailto: > [EMAIL PROTECTED] On Behalf Of Steve Davies > Sent: 26. januar 2007 12:03 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Sangoma card dying after 1hour > > Which asterisk versions etc etc? > > On 1/26/07, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: > > I am running the newest version, from the sangoma wiki. > > > > Jon > > > > -Original Message- > > From: [EMAIL PROTECTED] > > [mailto: [EMAIL PROTECTED] On Behalf Of Steve > > Davies > > Sent: 26. januar 2007 10:56 > > To: Asterisk Users Mailing List - Non-Commercial Discussion > > Subject: Re: [asterisk-users] Sangoma card dying after 1hour > > > > On 1/26/07, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: > > > > > > Hello List > > > > > > I am having a rather big problem with a sangoma A104 card, I just > > > installed to replace a Digium TE410 card, that was acting up. > > > > > > But now we have a problem with the sangoma card. It runs great after > > > being started, and calls proceed as normal, but after about 1 hour, > > > it stops being able to make and receive calls. > > > > > > If I run wanpipemon debug, can see that the card still receives > > > packets from the ISDN, but when I make a call, I cant see it in > > > wanpipemon, and asterisk just responds with a: > > > > > > NOTICE[17240] app_dial.c: Unable to create channel of type 'Zap' > > > (cause 34 - Circuit/channel congestion) > > > > > > I am pretty shure that this is a configuration issue, but are there > > > anything I need to be aware of when moving from a Digium card to a > sangoma card? > > > > Which wanpipe version? Anything lower than 2.3.4-4 should be upgraded > > as there are some resource leak fixes in that version. > > > > Regards, > > Steve > > ___ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > >http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > >http://lists.digium.com/mailman/listinfo/asterisk-users > > > ___ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ > --Bandwidth and Colocation provided by
RE: [asterisk-users] Sangoma card dying after 1hour
Hi Jon, Did you find any solution for your problem? -- Alex -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jon Schopzinsky Sent: Friday, January 26, 2007 3:21 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [asterisk-users] Sangoma card dying after 1hour Asterisk is version 1.2.14, zaptel 1.2.12, libpri is whatever version was with zaptel 1.2.12 :) Jon -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Davies Sent: 26. januar 2007 12:03 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Sangoma card dying after 1hour Which asterisk versions etc etc? On 1/26/07, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: > I am running the newest version, from the sangoma wiki. > > Jon > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Davies > Sent: 26. januar 2007 10:56 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Sangoma card dying after 1hour > > On 1/26/07, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: > > > > Hello List > > > > I am having a rather big problem with a sangoma A104 card, I just installed > > to replace a Digium TE410 card, that was acting up. > > > > But now we have a problem with the sangoma card. It runs great after being > > started, and calls proceed as normal, but after about 1 hour, it stops being > > able to make and receive calls. > > > > If I run wanpipemon debug, can see that the card still receives packets > > from the ISDN, but when I make a call, I cant see it in wanpipemon, and > > asterisk just responds with a: > > > > NOTICE[17240] app_dial.c: Unable to create channel of type 'Zap' (cause 34 - > > Circuit/channel congestion) > > > > I am pretty shure that this is a configuration issue, but are there anything > > I need to be aware of when moving from a Digium card to a sangoma card? > > Which wanpipe version? Anything lower than 2.3.4-4 should be upgraded > as there are some resource leak fixes in that version. > > Regards, > Steve > ___ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users