[asterisk-users] Spectralink 8002
Hello, I hope this isn't too off topic, but I'm attempting to set up a Spectralink 8002 Wifi phone with our Asterisk installation, and seem to be running into a brick well (more of a wall than others that have posted their experiences). My problem is that the phone boots, associates with the wireless, grabs an IP (tried static too - same thing), contacts the TFTP server for firmware, then says No net found and starts all over again. The phone has already sucessfully connected and downloaded firmware (the latest - 130.009) without issue. Also, each time it boots, we see the following traffic from the phone (seems to only be looking at firmware and refusing to do anything else). I've checked the admin guide, and everything seems to be set up properly. Has anyone else used these phones and had similar issues? Thanks! 0.036561 PHONE_IP - SERVER_IP TFTP Read Request, File: slnk_cfg.cfg\000, Transfer type: octet\000 0.036891 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 (last) 0.045617 PHONE_IP - SERVER_IP TFTP Acknowledgement, Block: 1 0.049106 PHONE_IP - SERVER_IP TFTP Read Request, File: pd11wsd.bin\000, Transfer type: octet\000 0.049416 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.068726 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 0.072439 PHONE_IP - SERVER_IP TFTP Read Request, File: pd11gl3.bin\000, Transfer type: octet\000 0.072729 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.095686 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 0.098958 PHONE_IP - SERVER_IP TFTP Read Request, File: pd11wsd3.bin\000, Transfer type: octet\000 0.099228 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.120597 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 0.123618 PHONE_IP - SERVER_IP TFTP Read Request, File: pi110001.bin\000, Transfer type: octet\000 0.123892 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.145259 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 -Jon -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Spectralink 8002
If memory serves, those errors you see are normal. The phone downloads the slnk_cfg.cfg to see what other files it should get. It then just downloads the first block of each file to compare with what it already has. If it is the same, it breaks the connection, which the TFTP server sees as an error. Beyond that, I'm afraid I can't be much help. On Fri, Jan 14, 2011 at 2:46 PM, Jonathan C. Bailey jbai...@co.marshall.ia.us wrote: Hello, I hope this isn't too off topic, but I'm attempting to set up a Spectralink 8002 Wifi phone with our Asterisk installation, and seem to be running into a brick well (more of a wall than others that have posted their experiences). My problem is that the phone boots, associates with the wireless, grabs an IP (tried static too - same thing), contacts the TFTP server for firmware, then says No net found and starts all over again. The phone has already sucessfully connected and downloaded firmware (the latest - 130.009) without issue. Also, each time it boots, we see the following traffic from the phone (seems to only be looking at firmware and refusing to do anything else). I've checked the admin guide, and everything seems to be set up properly. Has anyone else used these phones and had similar issues? Thanks! 0.036561 PHONE_IP - SERVER_IP TFTP Read Request, File: slnk_cfg.cfg\000, Transfer type: octet\000 0.036891 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 (last) 0.045617 PHONE_IP - SERVER_IP TFTP Acknowledgement, Block: 1 0.049106 PHONE_IP - SERVER_IP TFTP Read Request, File: pd11wsd.bin\000, Transfer type: octet\000 0.049416 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.068726 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 0.072439 PHONE_IP - SERVER_IP TFTP Read Request, File: pd11gl3.bin\000, Transfer type: octet\000 0.072729 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.095686 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 0.098958 PHONE_IP - SERVER_IP TFTP Read Request, File: pd11wsd3.bin\000, Transfer type: octet\000 0.099228 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.120597 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 0.123618 PHONE_IP - SERVER_IP TFTP Read Request, File: pi110001.bin\000, Transfer type: octet\000 0.123892 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.145259 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 -Jon -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Spectralink 8002
I figured that (since the firmware is current on the phone). I just can't figure why it won't connect. I did notice the phone was showing no net found and the AP MAC (or similar) right after that traffic. -Jon - Original Message - From: MrHanMan mrhan...@gmail.com To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Friday, January 14, 2011 3:32:19 PM Subject: Re: [asterisk-users] Spectralink 8002 If memory serves, those errors you see are normal. The phone downloads the slnk_cfg.cfg to see what other files it should get. It then just downloads the first block of each file to compare with what it already has. If it is the same, it breaks the connection, which the TFTP server sees as an error. Beyond that, I'm afraid I can't be much help. On Fri, Jan 14, 2011 at 2:46 PM, Jonathan C. Bailey jbai...@co.marshall.ia.us wrote: Hello, I hope this isn't too off topic, but I'm attempting to set up a Spectralink 8002 Wifi phone with our Asterisk installation, and seem to be running into a brick well (more of a wall than others that have posted their experiences). My problem is that the phone boots, associates with the wireless, grabs an IP (tried static too - same thing), contacts the TFTP server for firmware, then says No net found and starts all over again. The phone has already sucessfully connected and downloaded firmware (the latest - 130.009) without issue. Also, each time it boots, we see the following traffic from the phone (seems to only be looking at firmware and refusing to do anything else). I've checked the admin guide, and everything seems to be set up properly. Has anyone else used these phones and had similar issues? Thanks! 0.036561 PHONE_IP - SERVER_IP TFTP Read Request, File: slnk_cfg.cfg\000, Transfer type: octet\000 0.036891 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 (last) 0.045617 PHONE_IP - SERVER_IP TFTP Acknowledgement, Block: 1 0.049106 PHONE_IP - SERVER_IP TFTP Read Request, File: pd11wsd.bin\000, Transfer type: octet\000 0.049416 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.068726 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 0.072439 PHONE_IP - SERVER_IP TFTP Read Request, File: pd11gl3.bin\000, Transfer type: octet\000 0.072729 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.095686 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 0.098958 PHONE_IP - SERVER_IP TFTP Read Request, File: pd11wsd3.bin\000, Transfer type: octet\000 0.099228 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.120597 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 0.123618 PHONE_IP - SERVER_IP TFTP Read Request, File: pi110001.bin\000, Transfer type: octet\000 0.123892 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.145259 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 -Jon -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Spectralink 8002
The only time I've seen no net found on a spectralink phone is when it's out of range of the AP. That doesn't make sense if it just successfully connected to the TFTP server. What sort of AP are you connecting to? Could it have a security feature that disallows reconnects within a certain time frame? On Fri, Jan 14, 2011 at 3:39 PM, Jonathan C. Bailey jbai...@co.marshall.ia.us wrote: I figured that (since the firmware is current on the phone). I just can't figure why it won't connect. I did notice the phone was showing no net found and the AP MAC (or similar) right after that traffic. -Jon - Original Message - From: MrHanMan mrhan...@gmail.com To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Friday, January 14, 2011 3:32:19 PM Subject: Re: [asterisk-users] Spectralink 8002 If memory serves, those errors you see are normal. The phone downloads the slnk_cfg.cfg to see what other files it should get. It then just downloads the first block of each file to compare with what it already has. If it is the same, it breaks the connection, which the TFTP server sees as an error. Beyond that, I'm afraid I can't be much help. On Fri, Jan 14, 2011 at 2:46 PM, Jonathan C. Bailey jbai...@co.marshall.ia.us wrote: Hello, I hope this isn't too off topic, but I'm attempting to set up a Spectralink 8002 Wifi phone with our Asterisk installation, and seem to be running into a brick well (more of a wall than others that have posted their experiences). My problem is that the phone boots, associates with the wireless, grabs an IP (tried static too - same thing), contacts the TFTP server for firmware, then says No net found and starts all over again. The phone has already sucessfully connected and downloaded firmware (the latest - 130.009) without issue. Also, each time it boots, we see the following traffic from the phone (seems to only be looking at firmware and refusing to do anything else). I've checked the admin guide, and everything seems to be set up properly. Has anyone else used these phones and had similar issues? Thanks! 0.036561 PHONE_IP - SERVER_IP TFTP Read Request, File: slnk_cfg.cfg\000, Transfer type: octet\000 0.036891 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 (last) 0.045617 PHONE_IP - SERVER_IP TFTP Acknowledgement, Block: 1 0.049106 PHONE_IP - SERVER_IP TFTP Read Request, File: pd11wsd.bin\000, Transfer type: octet\000 0.049416 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.068726 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 0.072439 PHONE_IP - SERVER_IP TFTP Read Request, File: pd11gl3.bin\000, Transfer type: octet\000 0.072729 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.095686 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 0.098958 PHONE_IP - SERVER_IP TFTP Read Request, File: pd11wsd3.bin\000, Transfer type: octet\000 0.099228 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.120597 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 0.123618 PHONE_IP - SERVER_IP TFTP Read Request, File: pi110001.bin\000, Transfer type: octet\000 0.123892 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.145259 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 -Jon -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE
Re: [asterisk-users] Spectralink 8002
It's a Netgear WG102 AP with a WFS709TP wireless controller. The controller is basically a rebranded Aruba MC-800 (don't know about the APs). I've also tried on my WRT-54G at home, and it does the same thing. -Jon - Original Message - From: MrHanMan mrhan...@gmail.com To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Friday, January 14, 2011 3:45:55 PM Subject: Re: [asterisk-users] Spectralink 8002 The only time I've seen no net found on a spectralink phone is when it's out of range of the AP. That doesn't make sense if it just successfully connected to the TFTP server. What sort of AP are you connecting to? Could it have a security feature that disallows reconnects within a certain time frame? On Fri, Jan 14, 2011 at 3:39 PM, Jonathan C. Bailey jbai...@co.marshall.ia.us wrote: I figured that (since the firmware is current on the phone). I just can't figure why it won't connect. I did notice the phone was showing no net found and the AP MAC (or similar) right after that traffic. -Jon - Original Message - From: MrHanMan mrhan...@gmail.com To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Friday, January 14, 2011 3:32:19 PM Subject: Re: [asterisk-users] Spectralink 8002 If memory serves, those errors you see are normal. The phone downloads the slnk_cfg.cfg to see what other files it should get. It then just downloads the first block of each file to compare with what it already has. If it is the same, it breaks the connection, which the TFTP server sees as an error. Beyond that, I'm afraid I can't be much help. On Fri, Jan 14, 2011 at 2:46 PM, Jonathan C. Bailey jbai...@co.marshall.ia.us wrote: Hello, I hope this isn't too off topic, but I'm attempting to set up a Spectralink 8002 Wifi phone with our Asterisk installation, and seem to be running into a brick well (more of a wall than others that have posted their experiences). My problem is that the phone boots, associates with the wireless, grabs an IP (tried static too - same thing), contacts the TFTP server for firmware, then says No net found and starts all over again. The phone has already sucessfully connected and downloaded firmware (the latest - 130.009) without issue. Also, each time it boots, we see the following traffic from the phone (seems to only be looking at firmware and refusing to do anything else). I've checked the admin guide, and everything seems to be set up properly. Has anyone else used these phones and had similar issues? Thanks! 0.036561 PHONE_IP - SERVER_IP TFTP Read Request, File: slnk_cfg.cfg\000, Transfer type: octet\000 0.036891 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 (last) 0.045617 PHONE_IP - SERVER_IP TFTP Acknowledgement, Block: 1 0.049106 PHONE_IP - SERVER_IP TFTP Read Request, File: pd11wsd.bin\000, Transfer type: octet\000 0.049416 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.068726 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 0.072439 PHONE_IP - SERVER_IP TFTP Read Request, File: pd11gl3.bin\000, Transfer type: octet\000 0.072729 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.095686 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 0.098958 PHONE_IP - SERVER_IP TFTP Read Request, File: pd11wsd3.bin\000, Transfer type: octet\000 0.099228 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.120597 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 0.123618 PHONE_IP - SERVER_IP TFTP Read Request, File: pi110001.bin\000, Transfer type: octet\000 0.123892 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.145259 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 -Jon -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs
Re: [asterisk-users] Spectralink 8002
Do you see any attempt on the wireless controller from the phone to connect to anything on the network after the TFTP exchange? Any traffic at all on the network from the phone? Have you tried to capture packets with Wireshark or something similar? On Fri, Jan 14, 2011 at 4:15 PM, Jonathan C. Bailey jbai...@co.marshall.ia.us wrote: It's a Netgear WG102 AP with a WFS709TP wireless controller. The controller is basically a rebranded Aruba MC-800 (don't know about the APs). I've also tried on my WRT-54G at home, and it does the same thing. -Jon - Original Message - From: MrHanMan mrhan...@gmail.com To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Friday, January 14, 2011 3:45:55 PM Subject: Re: [asterisk-users] Spectralink 8002 The only time I've seen no net found on a spectralink phone is when it's out of range of the AP. That doesn't make sense if it just successfully connected to the TFTP server. What sort of AP are you connecting to? Could it have a security feature that disallows reconnects within a certain time frame? On Fri, Jan 14, 2011 at 3:39 PM, Jonathan C. Bailey jbai...@co.marshall.ia.us wrote: I figured that (since the firmware is current on the phone). I just can't figure why it won't connect. I did notice the phone was showing no net found and the AP MAC (or similar) right after that traffic. -Jon - Original Message - From: MrHanMan mrhan...@gmail.com To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Friday, January 14, 2011 3:32:19 PM Subject: Re: [asterisk-users] Spectralink 8002 If memory serves, those errors you see are normal. The phone downloads the slnk_cfg.cfg to see what other files it should get. It then just downloads the first block of each file to compare with what it already has. If it is the same, it breaks the connection, which the TFTP server sees as an error. Beyond that, I'm afraid I can't be much help. On Fri, Jan 14, 2011 at 2:46 PM, Jonathan C. Bailey jbai...@co.marshall.ia.us wrote: Hello, I hope this isn't too off topic, but I'm attempting to set up a Spectralink 8002 Wifi phone with our Asterisk installation, and seem to be running into a brick well (more of a wall than others that have posted their experiences). My problem is that the phone boots, associates with the wireless, grabs an IP (tried static too - same thing), contacts the TFTP server for firmware, then says No net found and starts all over again. The phone has already sucessfully connected and downloaded firmware (the latest - 130.009) without issue. Also, each time it boots, we see the following traffic from the phone (seems to only be looking at firmware and refusing to do anything else). I've checked the admin guide, and everything seems to be set up properly. Has anyone else used these phones and had similar issues? Thanks! 0.036561 PHONE_IP - SERVER_IP TFTP Read Request, File: slnk_cfg.cfg\000, Transfer type: octet\000 0.036891 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 (last) 0.045617 PHONE_IP - SERVER_IP TFTP Acknowledgement, Block: 1 0.049106 PHONE_IP - SERVER_IP TFTP Read Request, File: pd11wsd.bin\000, Transfer type: octet\000 0.049416 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.068726 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 0.072439 PHONE_IP - SERVER_IP TFTP Read Request, File: pd11gl3.bin\000, Transfer type: octet\000 0.072729 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.095686 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 0.098958 PHONE_IP - SERVER_IP TFTP Read Request, File: pd11wsd3.bin\000, Transfer type: octet\000 0.099228 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.120597 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 0.123618 PHONE_IP - SERVER_IP TFTP Read Request, File: pi110001.bin\000, Transfer type: octet\000 0.123892 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.145259 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 -Jon -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello
Re: [asterisk-users] Spectralink 8002
The traffic I originally posted was all (except the DHCP request/response) that the phone did since power on. That was sniffed at the output of the wireless controller (all APs tunnel back to the controller). The wireless controller shows the phone as connected, but I haven't gone much further with troubleshooting there... A call to Polycom may be in order, but I don't know what kind of support I get as an end user. -Jon - Original Message - From: MrHanMan mrhan...@gmail.com To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Friday, January 14, 2011 4:29:17 PM Subject: Re: [asterisk-users] Spectralink 8002 Do you see any attempt on the wireless controller from the phone to connect to anything on the network after the TFTP exchange? Any traffic at all on the network from the phone? Have you tried to capture packets with Wireshark or something similar? On Fri, Jan 14, 2011 at 4:15 PM, Jonathan C. Bailey jbai...@co.marshall.ia.us wrote: It's a Netgear WG102 AP with a WFS709TP wireless controller. The controller is basically a rebranded Aruba MC-800 (don't know about the APs). I've also tried on my WRT-54G at home, and it does the same thing. -Jon - Original Message - From: MrHanMan mrhan...@gmail.com To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Friday, January 14, 2011 3:45:55 PM Subject: Re: [asterisk-users] Spectralink 8002 The only time I've seen no net found on a spectralink phone is when it's out of range of the AP. That doesn't make sense if it just successfully connected to the TFTP server. What sort of AP are you connecting to? Could it have a security feature that disallows reconnects within a certain time frame? On Fri, Jan 14, 2011 at 3:39 PM, Jonathan C. Bailey jbai...@co.marshall.ia.us wrote: I figured that (since the firmware is current on the phone). I just can't figure why it won't connect. I did notice the phone was showing no net found and the AP MAC (or similar) right after that traffic. -Jon - Original Message - From: MrHanMan mrhan...@gmail.com To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Friday, January 14, 2011 3:32:19 PM Subject: Re: [asterisk-users] Spectralink 8002 If memory serves, those errors you see are normal. The phone downloads the slnk_cfg.cfg to see what other files it should get. It then just downloads the first block of each file to compare with what it already has. If it is the same, it breaks the connection, which the TFTP server sees as an error. Beyond that, I'm afraid I can't be much help. On Fri, Jan 14, 2011 at 2:46 PM, Jonathan C. Bailey jbai...@co.marshall.ia.us wrote: Hello, I hope this isn't too off topic, but I'm attempting to set up a Spectralink 8002 Wifi phone with our Asterisk installation, and seem to be running into a brick well (more of a wall than others that have posted their experiences). My problem is that the phone boots, associates with the wireless, grabs an IP (tried static too - same thing), contacts the TFTP server for firmware, then says No net found and starts all over again. The phone has already sucessfully connected and downloaded firmware (the latest - 130.009) without issue. Also, each time it boots, we see the following traffic from the phone (seems to only be looking at firmware and refusing to do anything else). I've checked the admin guide, and everything seems to be set up properly. Has anyone else used these phones and had similar issues? Thanks! 0.036561 PHONE_IP - SERVER_IP TFTP Read Request, File: slnk_cfg.cfg\000, Transfer type: octet\000 0.036891 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 (last) 0.045617 PHONE_IP - SERVER_IP TFTP Acknowledgement, Block: 1 0.049106 PHONE_IP - SERVER_IP TFTP Read Request, File: pd11wsd.bin\000, Transfer type: octet\000 0.049416 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.068726 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 0.072439 PHONE_IP - SERVER_IP TFTP Read Request, File: pd11gl3.bin\000, Transfer type: octet\000 0.072729 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.095686 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 0.098958 PHONE_IP - SERVER_IP TFTP Read Request, File: pd11wsd3.bin\000, Transfer type: octet\000 0.099228 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.120597 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed\000 0.123618 PHONE_IP - SERVER_IP TFTP Read Request, File: pi110001.bin\000, Transfer type: octet\000 0.123892 SERVER_IP - PHONE_IP TFTP Data Packet, Block: 1 0.145259 PHONE_IP - SERVER_IP TFTP Error Code, Code: File already exists, Message: No download needed