Re: [asterisk-users] TDM400p Loaded only once

2007-03-01 Thread Il Neofita 

Thank you for the answer
after

modprobe wctdm
ZT_CHANCONFIG failed on channel 1: No such device or address (6)
FATAL: Error running install command for wctdm

/proc/zaptel/ (empty)

/usr/src/asterisk/zaptel-1.2.14/xpp/utils/genzaptelconf -l (no result)



On 3/1/07, Tzafrir Cohen <[EMAIL PROTECTED]> wrote:


On Thu, Mar 01, 2007 at 06:21:38AM -0500, Il Neofita wrote:
> Hi
> when I turn on my PC I able to load the drivers and start my card,
> if I reboot the PC I have the following error
>
> ztcfg -vvv
>
> Zaptel Configuration
> ==
>
>
> Channel map:
>
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> Channel 02: FXS Kewlstart (Default) (Slaves: 02)
> Channel 03: FXS Kewlstart (Default) (Slaves: 03)
> Channel 04: FXS Kewlstart (Default) (Slaves: 04)

This is what you attempt to configure

>
> 4 channels configured.
>
> ZT_CHANCONFIG failed on channel 1: No such device or address (6)

And that is the result.

What do you see on /proc/zaptel ?

What is the output of 'xpp/utils/genzaptelconf -l' from the zaptel
source directory?

>
> This is part of my dmesg
> audit(1172747900.510:5): avc:  denied  { net_bind_service }
for  pid=1657
> comm="hidd" capability=10 scontext=system_u:system_r:bluetooth_t:s0
> tcontext=system_u:system_r:bluetooth_t:s0 tclass=capability
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> eth0: no IPv6 routers present
> [drm] Initialized drm 1.1.0 20060810
> ACPI: PCI Interrupt :01:00.0[A] -> GSI 16 (level, low) -> IRQ 19
> [drm] Initialized r128 2.5.0 20030725 on minor 0
> agpgart: Found an AGP 3.0 compliant device at :00:00.0.
> agpgart: Device is in legacy mode, falling back to 2.x
> agpgart: Putting AGP V2 device at :00:00.0 into 1x mode
> agpgart: Putting AGP V2 device at :01:00.0 into 1x mode
> audit(1172747921.184:6): avc:  denied  { getattr } for  pid=2323
> comm="pam_console_app" name="card0" dev=tmpfs ino=7969
> scontext=system_u:system_r:pam_console_t:s0-s0:
c0.c255tcontext=system_u:object_r:device_t:s0
> tclass=chr_file
> Zapata Telephony Interface Registered on major 196
> Zaptel Version: 1.2.14
> Zaptel Echo Canceller: KB1

Load of zaptel. No load of wctdm in sight.

>
> and finally this is my configuration
> fxsks=1-4
> loadzone=us
> defaultzone=us

--
   Tzafrir Cohen
icq#16849755jabber:[EMAIL PROTECTED]
+972-50-7952406   mailto:[EMAIL PROTECTED]
http://www.xorcom.com  iax:[EMAIL PROTECTED]/tzafrir
___
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

___
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [asterisk-users] TDM400p Loaded only once

2007-03-01 Thread Tzafrir Cohen 
On Thu, Mar 01, 2007 at 06:21:38AM -0500, Il Neofita wrote:
> Hi
> when I turn on my PC I able to load the drivers and start my card,
> if I reboot the PC I have the following error
> 
> ztcfg -vvv
> 
> Zaptel Configuration
> ==
> 
> 
> Channel map:
> 
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> Channel 02: FXS Kewlstart (Default) (Slaves: 02)
> Channel 03: FXS Kewlstart (Default) (Slaves: 03)
> Channel 04: FXS Kewlstart (Default) (Slaves: 04)

This is what you attempt to configure

> 
> 4 channels configured.
> 
> ZT_CHANCONFIG failed on channel 1: No such device or address (6)

And that is the result.

What do you see on /proc/zaptel ?

What is the output of 'xpp/utils/genzaptelconf -l' from the zaptel
source directory?

> 
> This is part of my dmesg
> audit(1172747900.510:5): avc:  denied  { net_bind_service } for  pid=1657
> comm="hidd" capability=10 scontext=system_u:system_r:bluetooth_t:s0
> tcontext=system_u:system_r:bluetooth_t:s0 tclass=capability
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> eth0: no IPv6 routers present
> [drm] Initialized drm 1.1.0 20060810
> ACPI: PCI Interrupt :01:00.0[A] -> GSI 16 (level, low) -> IRQ 19
> [drm] Initialized r128 2.5.0 20030725 on minor 0
> agpgart: Found an AGP 3.0 compliant device at :00:00.0.
> agpgart: Device is in legacy mode, falling back to 2.x
> agpgart: Putting AGP V2 device at :00:00.0 into 1x mode
> agpgart: Putting AGP V2 device at :01:00.0 into 1x mode
> audit(1172747921.184:6): avc:  denied  { getattr } for  pid=2323
> comm="pam_console_app" name="card0" dev=tmpfs ino=7969
> scontext=system_u:system_r:pam_console_t:s0-s0:c0.c255tcontext=system_u:object_r:device_t:s0
> tclass=chr_file
> Zapata Telephony Interface Registered on major 196
> Zaptel Version: 1.2.14
> Zaptel Echo Canceller: KB1

Load of zaptel. No load of wctdm in sight.

> 
> and finally this is my configuration
> fxsks=1-4
> loadzone=us
> defaultzone=us

-- 
   Tzafrir Cohen   
icq#16849755jabber:[EMAIL PROTECTED]
+972-50-7952406   mailto:[EMAIL PROTECTED]   
http://www.xorcom.com  iax:[EMAIL PROTECTED]/tzafrir
___
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

[asterisk-users] TDM400p Loaded only once

2007-03-01 Thread Il Neofita 

Hi
when I turn on my PC I able to load the drivers and start my card,
if I reboot the PC I have the following error

ztcfg -vvv

Zaptel Configuration
==


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)

4 channels configured.

ZT_CHANCONFIG failed on channel 1: No such device or address (6)

This is part of my dmesg
audit(1172747900.510:5): avc:  denied  { net_bind_service } for  pid=1657
comm="hidd" capability=10 scontext=system_u:system_r:bluetooth_t:s0
tcontext=system_u:system_r:bluetooth_t:s0 tclass=capability
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth0: no IPv6 routers present
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt :01:00.0[A] -> GSI 16 (level, low) -> IRQ 19
[drm] Initialized r128 2.5.0 20030725 on minor 0
agpgart: Found an AGP 3.0 compliant device at :00:00.0.
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at :00:00.0 into 1x mode
agpgart: Putting AGP V2 device at :01:00.0 into 1x mode
audit(1172747921.184:6): avc:  denied  { getattr } for  pid=2323
comm="pam_console_app" name="card0" dev=tmpfs ino=7969
scontext=system_u:system_r:pam_console_t:s0-s0:c0.c255tcontext=system_u:object_r:device_t:s0
tclass=chr_file
Zapata Telephony Interface Registered on major 196
Zaptel Version: 1.2.14
Zaptel Echo Canceller: KB1

and finally this is my configuration
fxsks=1-4
loadzone=us
defaultzone=us
___
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users