[asterisk-users] TE205P
Hello, I am working on a project and have a few questions. I want to connect one port of the TE205p to the PSTN, and another port to the PRI port of a PBX. Basically Asterisk will sit between the PSTN and the existing PBX. Are there any gotcha's I need to be aware of? Will the existing PBX be able to dial through asterisk as if it was a PSTN connection? -- Isaac McDonald Got VoIP? [EMAIL PROTECTED] Cell: +1 253-223-8673 ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] TE205P
On Wed, 2008-04-02 at 13:26 -0700, Isaac McDonald wrote: I am working on a project and have a few questions. I want to connect one port of the TE205p to the PSTN, and another port to the PRI port of a PBX. Basically Asterisk will sit between the PSTN and the existing PBX. This will work just fine. Are there any gotcha's I need to be aware of? Will the existing PBX be able to dial through asterisk as if it was a PSTN connection? Yes, as long as you configure Asterisk correctly. -- Jared Smith Community Relations Manager Digium, Inc. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] TE205P, E1, Panasonic PBX and hang-up issues
Yes that makes more sense. Now to the problem, please post your zapata.conf as well as your zaptel.conf. Also if you don't mind downloading the config file from the Panasonic TD1232 and email to me off list so I can take a look at it and make sure the settings are ok on the panasonic side. Thank you On 5/28/07, Barry O'Donovan [EMAIL PROTECTED] wrote: On Fri 25 May 2007, C F wrote: Are you sure the panasonic is TVP 100? I have installed over 50 Panasonic systems in my life, and service many more, I have never heard of that system, and a quick google shows it's just a VoiceMail system and not a PBX. Thanks for the reply. Does D1232 Digital Super Hybrid System make more sense? Thanks, Barry On 5/23/07, Barry O'Donovan [EMAIL PROTECTED] wrote: Hey folks, I have a Digium TE205P working as a man in the middle: PRI line Asterisk/TE205P PBX The PBX is a Panasonic KX - TVP 100. Everything is working great except for one little issue. Asterisk isn't hanging up the PRI B channel when the PBX channel is hung up. I don't want to overload you with information but please ask if more is needed. I suspect I'm really hoping someone who had a similar problem with just say ah, I know what that is!. Versions in use for Zaptel, LibPRI and Asterisk are all the SVN 1.4 branch. To replicate: 1. dial a mobile (say) from one of the PBX phones; 2. when you here a ring tone, hang up the PBX phone; 3. the mobile continues to ring. The verbose output is: -- Accepting overlap call from '' to 'unspecified' on channel 0/17, span 2 -- Starting simple switch on 'Zap/48-1' -- Executing [EMAIL PROTECTED]:1] Set(Zap/48-1, RECORDFILE=/srv/recordings/live/1179858572.0) in new stack -- Executing [EMAIL PROTECTED]:2] MixMonitor(Zap/48-1, /srv/recordings/live/1179858572.0.wav|b) in new stack -- Executing [EMAIL PROTECTED]:3] SetCallerPres(Zap/48-1, allowed) in new stack -- Executing [EMAIL PROTECTED]:4] SetCallerID(Zap/48-1, 5400) in new stack -- Executing [EMAIL PROTECTED]:5] Dial(Zap/48-1, Zap/g0/0868017669) in new stack -- Requested transfer capability: 0x00 - SPEECH -- Called g0/0868017669 == Begin MixMonitor Recording Zap/48-1 -- Zap/1-1 is ringing -- Channel 0/17, span 2 got hangup request, cause 16 -- Zap/1-1 answered Zap/48-1 -- Channel 0/1, span 1 got hangup request, cause 0 -- Hungup 'Zap/1-1' == Spawn extension (pbx, 0868017669, 5) exited non-zero on 'Zap/48-1' == End MixMonitor Recording Zap/48-1 -- Hungup 'Zap/48-1' asterisk1*CLI Any suggestions or fixes that you might have from prior instances would be greatly appreciated. Thanks a million, Barry O'Donovan http://www.barryodonovan.com/ ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Kind regards, Barry O'Donovan +353 86 801 7669 http://www.barryodonovan.com/ ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] TE205P, E1, Panasonic PBX and hang-up issues
According to your CLI output, the channel is being torn down. Is there a lag on the CLI between the inside channel and the outfacing channel getting the hangup request? Does this only happen on mobile phones? I know if I call my cell and hangup, it will continue to ring a couple or even a few more times. Thanks, Steve Totaro http://www.asteriskhelpdesk.com KB3OPB -Original Message- From: [EMAIL PROTECTED] [mailto:asterisk-users- [EMAIL PROTECTED] On Behalf Of C F Sent: Monday, May 28, 2007 6:30 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] TE205P, E1, Panasonic PBX and hang-up issues Yes that makes more sense. Now to the problem, please post your zapata.conf as well as your zaptel.conf. Also if you don't mind downloading the config file from the Panasonic TD1232 and email to me off list so I can take a look at it and make sure the settings are ok on the panasonic side. Thank you On 5/28/07, Barry O'Donovan [EMAIL PROTECTED] wrote: On Fri 25 May 2007, C F wrote: Are you sure the panasonic is TVP 100? I have installed over 50 Panasonic systems in my life, and service many more, I have never heard of that system, and a quick google shows it's just a VoiceMail system and not a PBX. Thanks for the reply. Does D1232 Digital Super Hybrid System make more sense? Thanks, Barry On 5/23/07, Barry O'Donovan [EMAIL PROTECTED] wrote: Hey folks, I have a Digium TE205P working as a man in the middle: PRI line Asterisk/TE205P PBX The PBX is a Panasonic KX - TVP 100. Everything is working great except for one little issue. Asterisk isn't hanging up the PRI B channel when the PBX channel is hung up. I don't want to overload you with information but please ask if more is needed. I suspect I'm really hoping someone who had a similar problem with just say ah, I know what that is!. Versions in use for Zaptel, LibPRI and Asterisk are all the SVN 1.4 branch. To replicate: 1. dial a mobile (say) from one of the PBX phones; 2. when you here a ring tone, hang up the PBX phone; 3. the mobile continues to ring. The verbose output is: -- Accepting overlap call from '' to 'unspecified' on channel 0/17, span 2 -- Starting simple switch on 'Zap/48-1' -- Executing [EMAIL PROTECTED]:1] Set(Zap/48-1, RECORDFILE=/srv/recordings/live/1179858572.0) in new stack -- Executing [EMAIL PROTECTED]:2] MixMonitor(Zap/48-1, /srv/recordings/live/1179858572.0.wav|b) in new stack -- Executing [EMAIL PROTECTED]:3] SetCallerPres(Zap/48-1, allowed) in new stack -- Executing [EMAIL PROTECTED]:4] SetCallerID(Zap/48-1, 5400) in new stack -- Executing [EMAIL PROTECTED]:5] Dial(Zap/48-1, Zap/g0/0868017669) in new stack -- Requested transfer capability: 0x00 - SPEECH -- Called g0/0868017669 == Begin MixMonitor Recording Zap/48-1 -- Zap/1-1 is ringing -- Channel 0/17, span 2 got hangup request, cause 16 -- Zap/1-1 answered Zap/48-1 -- Channel 0/1, span 1 got hangup request, cause 0 -- Hungup 'Zap/1-1' == Spawn extension (pbx, 0868017669, 5) exited non-zero on 'Zap/48-1' == End MixMonitor Recording Zap/48-1 -- Hungup 'Zap/48-1' asterisk1*CLI Any suggestions or fixes that you might have from prior instances would be greatly appreciated. Thanks a million, Barry O'Donovan http://www.barryodonovan.com/ ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Kind regards, Barry O'Donovan +353 86 801 7669 http://www.barryodonovan.com/ ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] TE205P, E1, Panasonic PBX and hang-up issues
Are you sure the panasonic is TVP 100? I have installed over 50 Panasonic systems in my life, and service many more, I have never heard of that system, and a quick google shows it's just a VoiceMail system and not a PBX. On 5/23/07, Barry O'Donovan [EMAIL PROTECTED] wrote: Hey folks, I have a Digium TE205P working as a man in the middle: PRI line Asterisk/TE205P PBX The PBX is a Panasonic KX - TVP 100. Everything is working great except for one little issue. Asterisk isn't hanging up the PRI B channel when the PBX channel is hung up. I don't want to overload you with information but please ask if more is needed. I suspect I'm really hoping someone who had a similar problem with just say ah, I know what that is!. Versions in use for Zaptel, LibPRI and Asterisk are all the SVN 1.4 branch. To replicate: 1. dial a mobile (say) from one of the PBX phones; 2. when you here a ring tone, hang up the PBX phone; 3. the mobile continues to ring. The verbose output is: -- Accepting overlap call from '' to 'unspecified' on channel 0/17, span 2 -- Starting simple switch on 'Zap/48-1' -- Executing [EMAIL PROTECTED]:1] Set(Zap/48-1, RECORDFILE=/srv/recordings/live/1179858572.0) in new stack -- Executing [EMAIL PROTECTED]:2] MixMonitor(Zap/48-1, /srv/recordings/live/1179858572.0.wav|b) in new stack -- Executing [EMAIL PROTECTED]:3] SetCallerPres(Zap/48-1, allowed) in new stack -- Executing [EMAIL PROTECTED]:4] SetCallerID(Zap/48-1, 5400) in new stack -- Executing [EMAIL PROTECTED]:5] Dial(Zap/48-1, Zap/g0/0868017669) in new stack -- Requested transfer capability: 0x00 - SPEECH -- Called g0/0868017669 == Begin MixMonitor Recording Zap/48-1 -- Zap/1-1 is ringing -- Channel 0/17, span 2 got hangup request, cause 16 -- Zap/1-1 answered Zap/48-1 -- Channel 0/1, span 1 got hangup request, cause 0 -- Hungup 'Zap/1-1' == Spawn extension (pbx, 0868017669, 5) exited non-zero on 'Zap/48-1' == End MixMonitor Recording Zap/48-1 -- Hungup 'Zap/48-1' asterisk1*CLI Any suggestions or fixes that you might have from prior instances would be greatly appreciated. Thanks a million, Barry O'Donovan http://www.barryodonovan.com/ ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] TE205P, E1, Panasonic PBX and hang-up issues
Hey folks, I have a Digium TE205P working as a man in the middle: PRI line Asterisk/TE205P PBX The PBX is a Panasonic KX - TVP 100. Everything is working great except for one little issue. Asterisk isn't hanging up the PRI B channel when the PBX channel is hung up. I don't want to overload you with information but please ask if more is needed. I suspect I'm really hoping someone who had a similar problem with just say ah, I know what that is!. Versions in use for Zaptel, LibPRI and Asterisk are all the SVN 1.4 branch. To replicate: 1. dial a mobile (say) from one of the PBX phones; 2. when you here a ring tone, hang up the PBX phone; 3. the mobile continues to ring. The verbose output is: -- Accepting overlap call from '' to 'unspecified' on channel 0/17, span 2 -- Starting simple switch on 'Zap/48-1' -- Executing [EMAIL PROTECTED]:1] Set(Zap/48-1, RECORDFILE=/srv/recordings/live/1179858572.0) in new stack -- Executing [EMAIL PROTECTED]:2] MixMonitor(Zap/48-1, /srv/recordings/live/1179858572.0.wav|b) in new stack -- Executing [EMAIL PROTECTED]:3] SetCallerPres(Zap/48-1, allowed) in new stack -- Executing [EMAIL PROTECTED]:4] SetCallerID(Zap/48-1, 5400) in new stack -- Executing [EMAIL PROTECTED]:5] Dial(Zap/48-1, Zap/g0/0868017669) in new stack -- Requested transfer capability: 0x00 - SPEECH -- Called g0/0868017669 == Begin MixMonitor Recording Zap/48-1 -- Zap/1-1 is ringing -- Channel 0/17, span 2 got hangup request, cause 16 -- Zap/1-1 answered Zap/48-1 -- Channel 0/1, span 1 got hangup request, cause 0 -- Hungup 'Zap/1-1' == Spawn extension (pbx, 0868017669, 5) exited non-zero on 'Zap/48-1' == End MixMonitor Recording Zap/48-1 -- Hungup 'Zap/48-1' asterisk1*CLI Any suggestions or fixes that you might have from prior instances would be greatly appreciated. Thanks a million, Barry O'Donovan http://www.barryodonovan.com/ ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] TE205P E1 PRI card and other problems
I some have problems with TE205P E1 PRI card. The Asterisk installation is as follows: Zaptel-1.2 drivers with Asterisk CVS HEAD from November First 1 TE205P E1 card with span 1 connected to the PSTN and span 2 connected to the digital E1 interface card of a Panasonic super hybrid PBX. 1 Voicetronix VPB4 card connected to the analog interface of the PBX (For dialing internal PBX extensions and mobile phones) Agents using SIP softphones use the TE205P to make outgoing calls on span 1 connected to the PSTN. Incoming calls on span 1 are bridged to span 2 and the call is passed to the PBX. TE205P seems to drop the calls from the PSTN side. This happens quite often and is causing great losses for the business. The calls being dropped are either incoming or outgoing. The reason I couldn't use Asterisk-1.2 with zaptel-1.2 drivers is that I am using the mysql realtime extensions on the system and Asterisk-1.2 seems to have problems with mysql realtime so I had to fall back on the CVS HEAD of November which works greatly with mysql and also with the TE110P card. Here is my /etc/zaptel.conf file: span=1,1,0,ccs,hdb3,crc4 span=2,0,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 bchan=32-46 dchan=47 bchan=48-62 loadzone = fr defaultzone=fr And here is my /etc/asterisk/zapata.conf ; ; Zapata telephony interface ; ; Configuration file [trunkgroups] ; Spanmap: Associates a span with a trunk group ;spanmap = zapspan,trunkgroup[,logicalspan] ;spanmap = 1,1,1 ;spanmap = 2,1,2 ;spanmap = 3,1,3 ;spanmap = 4,1,4 [channels] context=default switchtype=euroisdn pridialplan=unknown ; Overlap dialing mode (sending overlap digits) ;overlapdial=yes ; signalling=pri_net usecallerid=yes hidecallerid=no callwaiting=yes ;usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes ;canpark=yes ;cancallforward=yes ;callreturn=yes echocancel=yes echocancelwhenbridged=no rxgain=0.0 txgain=0.0 ; ; Logical groups can be assigned to allow outgoing rollover. Groups ; range from 0 to 63, and multiple groups can be specified. ; group=1 callgroup=1 pickupgroup=1 immediate=no callprogress=no group=1 signalling=pri_cpe channel=1-15 channel=17-31 group=2 signalling=pri_net channel=32-46 channel=48-62 I did some tracing and discovered that the TE205P card is sharing the IRQ with the Ethernet card, can this be the problem. If so how can I put each card on a separate IRQ (No free IRQs on the system). I also have horrible echo problems on the Voicetronix card, I have tried everything to solve the problem with no success. The only thing that seems to lessen the ECHO is to reduce the rx gain for both hardware and software, but I still get an audible echo on the line. Thanks and best regards, Antoine Megalla SAND (SA.E) www.sandvalley.net __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE205P in loopback?
All the config match. Just to make sure, how did you make your loopback cable? Which pins are conected were? Thanks in advance, -f From: "Steve Totaro" [EMAIL PROTECTED]Reply-To: Asterisk Users Mailing List - Non-Commercial Discussionasterisk-users@lists.digium.comTo: "Asterisk Users Mailing List - Non-Commercial Discussion"asterisk-users@lists.digium.comSubject: Re: [Asterisk-Users] TE205P in loopback?Date: Wed, 28 Sep 2005 22:28:02 -0700 It flashes red until the properly made cables are connected and then should turn to solid green. Again, I suspect your cableis the issue. Are all the drivers loaded? ztcfg? Asterisk running? One span set to pri_cpe and the other to pri_net? - Original Message - From: Franciraldo Cavalcante Junior To: asterisk-users@lists.digium.com Sent: Wednesday, September 28, 2005 6:47 PM Subject: Re: [Asterisk-Users] TE205P in loopback? The board flashes red without cables and continues flashing red after cables are connected. Should it flash green before? I don't see anything weird in dmegs results. From: "Steve Totaro" [EMAIL PROTECTED]Reply-To: Asterisk Users Mailing List - Non-Commercial Discussionasterisk-users@lists.digium.comTo: "Asterisk Users Mailing List - Non-Commercial Discussion"asterisk-users@lists.digium.comSubject: Re: [Asterisk-Users] TE205P in loopback?Date: Wed, 28 Sep 2005 21:12:08 -0700 If the cables are connected and the lights are still flashing red then I suspect that the cable is the issue. - Original Message - From: Franciraldo Cavalcante Junior To: asterisk-users@lists.digium.com Sent: Wednesday, September 28, 2005 5:44 PM Subject: Re: [Asterisk-Users] TE205P in loopback? I did the cable and configurationas recomended, but I may have another problem. After I run: modprobe zaptel modprobe wct2xxp I don't see the boards flashing green it's flashing red and in sync, as I implicitly understand from your message. Should it flash green and when correctly cabled and configured, keep green? How can I debug this? any help is appreciated. -f From: "Steve Totaro" [EMAIL PROTECTED]Reply-To: Asterisk Users Mailing List - Non-Commercial Discussionasterisk-users@lists.digium.comTo: "Asterisk Users Mailing List - Non-Commercial Discussion"asterisk-users@lists.digium.comSubject: Re: [Asterisk-Users] TE205P in loopback?Date: Wed, 28 Sep 2005 20:12:40 -0700 I just did this on a te410p. make a t1 crossover, cross pins one with four, and two with five. Setone span for pri_cpe and the other sidefor pri_net.boom, you are done and can start testing. the lights should turnsolid green and you shouldfirst see theD channels come up and then all theB channels, if this happens, you have done it correctly. thanks, Steve - Original Message - From: Franciraldo Cavalcante Junior To: asterisk-users@lists.digium.com Sent: Wednesday, September 28, 2005 4:46 PM Subject: [Asterisk-Users] TE205P in loopback? I'm a new * user and had just intalled A TE205P line in my Linux machine (running linux kernel 2.6.10). I would like to test the T1 interface but I don't have an ISDN PRI interface available right now. Is there a way to make some sort of loopback test? How to configure it? Do I need the cables to have tx/rx exchanged? Any help would be appreciated. - f ___--Bandwidth and Colocation sponsored by Easynews.com --Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users No virus found in this incoming message.Checked by AVG Anti-Virus.Version: 7.0.344 / Virus Database: 267.11.8/113 - Release Date: 9/27/05 ___--Bandwidth and Colocation sponsored by Easynews.com --Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___--Bandwidth and Colocation sponsored by Easynews.com --Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users No virus found in this incoming message.Checked by AVG Anti-Virus.Version: 7.0.344 / Virus Database: 267.11.8/113 - Release Date: 9/27/05 ___--Bandwidth and Colocation sponsored by Easynews.com --Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___--Bandwidth and Colocation sponsored by Easynews.com --As
[Asterisk-Users] TE205P in loopback?
I'm a new * user and had just intalled A TE205P line in my Linux machine (running linux kernel 2.6.10). I would like to test the T1 interface but I don't have an ISDN PRI interface available right now. Is there a way to make some sort of loopback test? How to configure it? Do I need the cables to have tx/rx exchanged? Any help would be appreciated. - f ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE205P in loopback?
I just did this on a te410p. make a t1 crossover, cross pins one with four, and two with five. Setone span for pri_cpe and the other sidefor pri_net.boom, you are done and can start testing. the lights should turnsolid green and you shouldfirst see theD channels come up and then all theB channels, if this happens, you have done it correctly. thanks, Steve - Original Message - From: Franciraldo Cavalcante Junior To: asterisk-users@lists.digium.com Sent: Wednesday, September 28, 2005 4:46 PM Subject: [Asterisk-Users] TE205P in loopback? I'm a new * user and had just intalled A TE205P line in my Linux machine (running linux kernel 2.6.10). I would like to test the T1 interface but I don't have an ISDN PRI interface available right now. Is there a way to make some sort of loopback test? How to configure it? Do I need the cables to have tx/rx exchanged? Any help would be appreciated. - f ___--Bandwidth and Colocation sponsored by Easynews.com --Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users No virus found in this incoming message.Checked by AVG Anti-Virus.Version: 7.0.344 / Virus Database: 267.11.8/113 - Release Date: 9/27/05 ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE205P in loopback?
Make an RJ-45 to RJ-45 cable like this: 1 - 4 2 - 5 5 - 2 4 - 1 In /usr/src/zaptel run zttool if zaptel is set up correctly and the driver is loaded, you should *not* see a red alarm. hth -Original Message- From: Franciraldo Cavalcante Junior [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 28, 2005 5:46 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] TE205P in loopback? I'm a new * user and had just intalled A TE205P line in my Linux machine (running linux kernel 2.6.10). I would like to test the T1 interface but I don't have an ISDN PRI interface available right now. Is there a way to make some sort of loopback test? How to configure it? Do I need the cables to have tx/rx exchanged? Any help would be appreciated. - f ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE205P in loopback?
I did the cable and configurationas recomended, but I may have another problem. After I run: modprobe zaptel modprobe wct2xxp I don't see the boards flashing green it's flashing red and in sync, as I implicitly understand from your message. Should it flash green and when correctly cabled and configured, keep green? How can I debug this? any help is appreciated. -f From: "Steve Totaro" [EMAIL PROTECTED]Reply-To: Asterisk Users Mailing List - Non-Commercial Discussionasterisk-users@lists.digium.comTo: "Asterisk Users Mailing List - Non-Commercial Discussion"asterisk-users@lists.digium.comSubject: Re: [Asterisk-Users] TE205P in loopback?Date: Wed, 28 Sep 2005 20:12:40 -0700 I just did this on a te410p. make a t1 crossover, cross pins one with four, and two with five. Setone span for pri_cpe and the other sidefor pri_net.boom, you are done and can start testing. the lights should turnsolid green and you shouldfirst see theD channels come up and then all theB channels, if this happens, you have done it correctly. thanks, Steve - Original Message - From: Franciraldo Cavalcante Junior To: asterisk-users@lists.digium.com Sent: Wednesday, September 28, 2005 4:46 PM Subject: [Asterisk-Users] TE205P in loopback? I'm a new * user and had just intalled A TE205P line in my Linux machine (running linux kernel 2.6.10). I would like to test the T1 interface but I don't have an ISDN PRI interface available right now. Is there a way to make some sort of loopback test? How to configure it? Do I need the cables to have tx/rx exchanged? Any help would be appreciated. - f ___--Bandwidth and Colocation sponsored by Easynews.com --Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users No virus found in this incoming message.Checked by AVG Anti-Virus.Version: 7.0.344 / Virus Database: 267.11.8/113 - Release Date: 9/27/05 ___--Bandwidth and Colocation sponsored by Easynews.com --Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE205P in loopback?
If the cables are connected and the lights are still flashing red then I suspect that the cable is the issue. - Original Message - From: Franciraldo Cavalcante Junior To: asterisk-users@lists.digium.com Sent: Wednesday, September 28, 2005 5:44 PM Subject: Re: [Asterisk-Users] TE205P in loopback? I did the cable and configurationas recomended, but I may have another problem. After I run: modprobe zaptel modprobe wct2xxp I don't see the boards flashing green it's flashing red and in sync, as I implicitly understand from your message. Should it flash green and when correctly cabled and configured, keep green? How can I debug this? any help is appreciated. -f From: "Steve Totaro" [EMAIL PROTECTED]Reply-To: Asterisk Users Mailing List - Non-Commercial Discussionasterisk-users@lists.digium.comTo: "Asterisk Users Mailing List - Non-Commercial Discussion"asterisk-users@lists.digium.comSubject: Re: [Asterisk-Users] TE205P in loopback?Date: Wed, 28 Sep 2005 20:12:40 -0700 I just did this on a te410p. make a t1 crossover, cross pins one with four, and two with five. Setone span for pri_cpe and the other sidefor pri_net.boom, you are done and can start testing. the lights should turnsolid green and you shouldfirst see theD channels come up and then all theB channels, if this happens, you have done it correctly. thanks, Steve - Original Message - From: Franciraldo Cavalcante Junior To: asterisk-users@lists.digium.com Sent: Wednesday, September 28, 2005 4:46 PM Subject: [Asterisk-Users] TE205P in loopback? I'm a new * user and had just intalled A TE205P line in my Linux machine (running linux kernel 2.6.10). I would like to test the T1 interface but I don't have an ISDN PRI interface available right now. Is there a way to make some sort of loopback test? How to configure it? Do I need the cables to have tx/rx exchanged? Any help would be appreciated. - f ___--Bandwidth and Colocation sponsored by Easynews.com --Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users No virus found in this incoming message.Checked by AVG Anti-Virus.Version: 7.0.344 / Virus Database: 267.11.8/113 - Release Date: 9/27/05 ___--Bandwidth and Colocation sponsored by Easynews.com --Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___--Bandwidth and Colocation sponsored by Easynews.com --Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users No virus found in this incoming message.Checked by AVG Anti-Virus.Version: 7.0.344 / Virus Database: 267.11.8/113 - Release Date: 9/27/05 ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE205P in loopback?
The board flashes red without cables and continues flashing red after cables are connected. Should it flash green before? I don't see anything weird in dmegs results. From: "Steve Totaro" [EMAIL PROTECTED]Reply-To: Asterisk Users Mailing List - Non-Commercial Discussionasterisk-users@lists.digium.comTo: "Asterisk Users Mailing List - Non-Commercial Discussion"asterisk-users@lists.digium.comSubject: Re: [Asterisk-Users] TE205P in loopback?Date: Wed, 28 Sep 2005 21:12:08 -0700 If the cables are connected and the lights are still flashing red then I suspect that the cable is the issue. - Original Message - From: Franciraldo Cavalcante Junior To: asterisk-users@lists.digium.com Sent: Wednesday, September 28, 2005 5:44 PM Subject: Re: [Asterisk-Users] TE205P in loopback? I did the cable and configurationas recomended, but I may have another problem. After I run: modprobe zaptel modprobe wct2xxp I don't see the boards flashing green it's flashing red and in sync, as I implicitly understand from your message. Should it flash green and when correctly cabled and configured, keep green? How can I debug this? any help is appreciated. -f From: "Steve Totaro" [EMAIL PROTECTED]Reply-To: Asterisk Users Mailing List - Non-Commercial Discussionasterisk-users@lists.digium.comTo: "Asterisk Users Mailing List - Non-Commercial Discussion"asterisk-users@lists.digium.comSubject: Re: [Asterisk-Users] TE205P in loopback?Date: Wed, 28 Sep 2005 20:12:40 -0700 I just did this on a te410p. make a t1 crossover, cross pins one with four, and two with five. Setone span for pri_cpe and the other sidefor pri_net.boom, you are done and can start testing. the lights should turnsolid green and you shouldfirst see theD channels come up and then all theB channels, if this happens, you have done it correctly. thanks, Steve - Original Message - From: Franciraldo Cavalcante Junior To: asterisk-users@lists.digium.com Sent: Wednesday, September 28, 2005 4:46 PM Subject: [Asterisk-Users] TE205P in loopback? I'm a new * user and had just intalled A TE205P line in my Linux machine (running linux kernel 2.6.10). I would like to test the T1 interface but I don't have an ISDN PRI interface available right now. Is there a way to make some sort of loopback test? How to configure it? Do I need the cables to have tx/rx exchanged? Any help would be appreciated. - f ___--Bandwidth and Colocation sponsored by Easynews.com --Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users No virus found in this incoming message.Checked by AVG Anti-Virus.Version: 7.0.344 / Virus Database: 267.11.8/113 - Release Date: 9/27/05 ___--Bandwidth and Colocation sponsored by Easynews.com --Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___--Bandwidth and Colocation sponsored by Easynews.com --Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users No virus found in this incoming message.Checked by AVG Anti-Virus.Version: 7.0.344 / Virus Database: 267.11.8/113 - Release Date: 9/27/05 ___--Bandwidth and Colocation sponsored by Easynews.com --Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE205P in loopback?
It flashes red until the properly made cables are connected and then should turn to solid green. Again, I suspect your cableis the issue. Are all the drivers loaded? ztcfg? Asterisk running? One span set to pri_cpe and the other to pri_net? - Original Message - From: Franciraldo Cavalcante Junior To: asterisk-users@lists.digium.com Sent: Wednesday, September 28, 2005 6:47 PM Subject: Re: [Asterisk-Users] TE205P in loopback? The board flashes red without cables and continues flashing red after cables are connected. Should it flash green before? I don't see anything weird in dmegs results. From: "Steve Totaro" [EMAIL PROTECTED]Reply-To: Asterisk Users Mailing List - Non-Commercial Discussionasterisk-users@lists.digium.comTo: "Asterisk Users Mailing List - Non-Commercial Discussion"asterisk-users@lists.digium.comSubject: Re: [Asterisk-Users] TE205P in loopback?Date: Wed, 28 Sep 2005 21:12:08 -0700 If the cables are connected and the lights are still flashing red then I suspect that the cable is the issue. - Original Message - From: Franciraldo Cavalcante Junior To: asterisk-users@lists.digium.com Sent: Wednesday, September 28, 2005 5:44 PM Subject: Re: [Asterisk-Users] TE205P in loopback? I did the cable and configurationas recomended, but I may have another problem. After I run: modprobe zaptel modprobe wct2xxp I don't see the boards flashing green it's flashing red and in sync, as I implicitly understand from your message. Should it flash green and when correctly cabled and configured, keep green? How can I debug this? any help is appreciated. -f From: "Steve Totaro" [EMAIL PROTECTED]Reply-To: Asterisk Users Mailing List - Non-Commercial Discussionasterisk-users@lists.digium.comTo: "Asterisk Users Mailing List - Non-Commercial Discussion"asterisk-users@lists.digium.comSubject: Re: [Asterisk-Users] TE205P in loopback?Date: Wed, 28 Sep 2005 20:12:40 -0700 I just did this on a te410p. make a t1 crossover, cross pins one with four, and two with five. Setone span for pri_cpe and the other sidefor pri_net.boom, you are done and can start testing. the lights should turnsolid green and you shouldfirst see theD channels come up and then all theB channels, if this happens, you have done it correctly. thanks, Steve - Original Message - From: Franciraldo Cavalcante Junior To: asterisk-users@lists.digium.com Sent: Wednesday, September 28, 2005 4:46 PM Subject: [Asterisk-Users] TE205P in loopback? I'm a new * user and had just intalled A TE205P line in my Linux machine (running linux kernel 2.6.10). I would like to test the T1 interface but I don't have an ISDN PRI interface available right now. Is there a way to make some sort of loopback test? How to configure it? Do I need the cables to have tx/rx exchanged? Any help would be appreciated. - f ___--Bandwidth and Colocation sponsored by Easynews.com --Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users No virus found in this incoming message.Checked by AVG Anti-Virus.Version: 7.0.344 / Virus Database: 267.11.8/113 - Release Date: 9/27/05 ___--Bandwidth and Colocation sponsored by Easynews.com --Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___--Bandwidth and Colocation sponsored by Easynews.com --Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users No virus found in this incoming message.Checked by AVG Anti-Virus.Version: 7.0.344
Re: [Asterisk-Users] TE205P installation problem - ZT_SPANCONFIG failed on span 1 [Virus checked]
have you checked if the card is recognized by the kernel ...loaded the needed module for the card to see which modules are actually loaded: lsmod to see which pci-cards are recognized by the kernel: lspci ...the digium cards are usually detected as an unknown network device the needed module should be wct2xxp - maybe wct4xxp will do this as well modules should be installed within /lib/modules/YOUR_KERNEL_VERSION/misc/ Wichtige Vorabinformation bw computer bezieht am 01.09.2005 neue Geschäftsräume. Unsere neue Adresse+Rufnummer: bw computer Fangdieckstr. 64 (1. Stock) 22547 Hamburg T: +49 40 / 49 296 - 0 F: +49 40 / 49 296 - 100 ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] TE205P installation problem - ZT_SPANCONFIG failed on span 1
Checked modules and wct4xxp and zaptel are loaded. (if you check the makefile wct2xxp is an alias for wct4xxp) Then did a lspci and it is not sharing any IRQs Now I am doing a zttest and it hangs on Opened pseudo zap interface, measuring accuracy... Richard -- have you checked if the card is recognized by the kernel ...loaded the needed module for the card to see which modules are actually loaded: lsmod to see which pci-cards are recognized by the kernel: lspci ...the digium cards are usually detected as an unknown network device the needed module should be wct2xxp - maybe wct4xxp will do this as well modules should be installed within /lib/modules/YOUR_KERNEL_VERSION/misc/ Wichtige Vorabinformation bw computer bezieht am 01.09.2005 neue Geschäftsräume. Unsere neue Adresse+Rufnummer: bw computer Fangdieckstr. 64 (1. Stock) 22547 Hamburg T: +49 40 / 49 296 - 0 F: +49 40 / 49 296 - 100 -- ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE205P installation problem - ZT_SPANCONFIG failed on span 1 [Virus checked]
maybe check that ztdummy is NOT loaded - otherwise I don't know... - call digium Wichtige Vorabinformation bw computer bezieht am 01.09.2005 neue Geschäftsräume. Unsere neue Adresse+Rufnummer: bw computer Fangdieckstr. 64 (1. Stock) 22547 Hamburg T: +49 40 / 49 296 - 0 F: +49 40 / 49 296 - 100 ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] TE205P installation problem - ZT_SPANCONFIG failed on span 1
I have installed a new TE205P in my asterisk server. When I reboot the box the error ZT_SPANCONFIG failed on span 1: No such device or address (6) When I modprobe wct2xxp and run ztcfg -vvv loads everything correctly. So it seems that it is not loading wct2xxp at boot. I then added the following to /etc/rc.d/init.d/zaptel with no success MODULES=torisa tor2 wct4xxp wct1xxp wcfxo wcfxs wcusb wcte11xp wct2xxp RMODULES=wcusb wcfxs wcfxo wct1xxp wct4xxp tor2 torisa wcte11xp wct2xxp How do I get this to load the card correctly at boot? Thanks for any help Rich ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE205P installation problem - ZT_SPANCONFIG failed on span 1
Cavanna, Richard wrote: I have installed a new TE205P in my asterisk server. When I reboot the box the error ZT_SPANCONFIG failed on span 1: No such device or address (6) Please contact Digium tech support, they will help you with your installation. ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users