RE: [asterisk-users] Zaptel problem after upgrading to 1.2.16
Never mind - I seem to have fixed this. I had unloaded zaptel and wctdm when recompiling everything, so asterisk apparently didn't compile those modules because I assume it didn't think I had the hardware installed. All working! From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Drew Gibson Sent: Saturday, 10 March 2007 12:04 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Zaptel problem after upgrading to 1.2.16 Mark Davies wrote: Hi guys, I'm hoping I've made a silly mistake here, but I've been staring at the screen for the past few hours and I can't work it out. I upgraded to 1.2.16 recently, and am having problems with zaptel. The card is detected, I get a reasonable output from ztcfg -vv, and zttool shows the installed module (TDM400) with one FXS module. But when I start asterisk, I get an error saying that my IAX connection won't work in trunked mode because there's no timing interface. Zaptel doesn't show up in the output of show channeltypes. Should there be a problem with using the trunk version of zaptel, but 1.2.16 of asterisk? Are there any places that I can specifically load/enable the zaptel module? Is there a chan_zap.so in /usr/lib/asterisk/modules? Are you upgrading over an existing install of Asterisk, or did you remove the old ver first? I had trouble building Asterisk 1.2.15 with the 1.4 zaptel driver. Asterisk did not find the zaptel src and wouldn't build chan_zap.so. regards, Drew -- Drew Gibson Systems Administrator OANDA Corporation www.oanda.com ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel problem after upgrading to 1.2.16
On Fri, Mar 09, 2007 at 04:13:04PM +0900, Mark Davies wrote: Hi guys, I'm hoping I've made a silly mistake here, but I've been staring at the screen for the past few hours and I can't work it out. I upgraded to 1.2.16 recently, and am having problems with zaptel. The card is detected, I get a reasonable output from ztcfg -vv, and zttool shows the installed module (TDM400) with one FXS module. Can you use those modules from Asterisk? Do you get a dialtone on the phone? But when I start asterisk, I get an error saying that my IAX connection won't work in trunked mode because there's no timing interface. Zaptel doesn't show up in the output of show channeltypes. Is there any? Is chan_zap.so loaded ? Do you even have /usr/lib/asterisk/modules/chan_zap.so ? If yes: do you have a valid timing source: try zttest . Should there be a problem with using the trunk version of zaptel, but 1.2.16 of asterisk? Did the same configuration work with other versions of Asterisk 1.2? What version of Zaptel do you have? Are there any places that I can specifically load/enable the zaptel module? Do you have automatic modules loading enabled in modules.conf? -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel problem after upgrading to 1.2.16
Mark Davies wrote: Hi guys, I'm hoping I've made a silly mistake here, but I've been staring at the screen for the past few hours and I can't work it out. I upgraded to 1.2.16 recently, and am having problems with zaptel. The card is detected, I get a reasonable output from ztcfg -vv, and zttool shows the installed module (TDM400) with one FXS module. But when I start asterisk, I get an error saying that my IAX connection won't work in trunked mode because there's no timing interface. Zaptel doesn't show up in the output of show channeltypes. Should there be a problem with using the trunk version of zaptel, but 1.2.16 of asterisk? Are there any places that I can specifically load/enable the zaptel module? Is there a chan_zap.so in /usr/lib/asterisk/modules? Are you upgrading over an existing install of Asterisk, or did you remove the old ver first? I had trouble building Asterisk 1.2.15 with the 1.4 zaptel driver. Asterisk did not find the zaptel src and wouldn't build chan_zap.so. regards, Drew -- Drew Gibson Systems Administrator OANDA Corporation www.oanda.com ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] Zaptel problem after upgrading to 1.2.16
Ah! No, there isn't a chan_zap.so in /usr/lib/asterisk/modules. I installed over a previous version, however I did delete the contents of /usr/lib/asterisk/modules before compiling and installing zaptel, libpri and asterisk. What is the best way to get chan_zap.so in there? Shouldn't that get installed when I do a make install of zaptel? Cheers, Mark. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Drew Gibson Sent: Saturday, 10 March 2007 12:04 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Zaptel problem after upgrading to 1.2.16 Mark Davies wrote: Hi guys, I'm hoping I've made a silly mistake here, but I've been staring at the screen for the past few hours and I can't work it out. I upgraded to 1.2.16 recently, and am having problems with zaptel. The card is detected, I get a reasonable output from ztcfg -vv, and zttool shows the installed module (TDM400) with one FXS module. But when I start asterisk, I get an error saying that my IAX connection won't work in trunked mode because there's no timing interface. Zaptel doesn't show up in the output of show channeltypes. Should there be a problem with using the trunk version of zaptel, but 1.2.16 of asterisk? Are there any places that I can specifically load/enable the zaptel module? Is there a chan_zap.so in /usr/lib/asterisk/modules? Are you upgrading over an existing install of Asterisk, or did you remove the old ver first? I had trouble building Asterisk 1.2.15 with the 1.4 zaptel driver. Asterisk did not find the zaptel src and wouldn't build chan_zap.so. regards, Drew -- Drew Gibson Systems Administrator OANDA Corporation www.oanda.com ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Zaptel problem after upgrading to 1.2.16
Hi guys, I'm hoping I've made a silly mistake here, but I've been staring at the screen for the past few hours and I can't work it out. I upgraded to 1.2.16 recently, and am having problems with zaptel. The card is detected, I get a reasonable output from ztcfg -vv, and zttool shows the installed module (TDM400) with one FXS module. But when I start asterisk, I get an error saying that my IAX connection won't work in trunked mode because there's no timing interface. Zaptel doesn't show up in the output of show channeltypes. Should there be a problem with using the trunk version of zaptel, but 1.2.16 of asterisk? Are there any places that I can specifically load/enable the zaptel module? Any help much appreciated before I go insane... J Regards, Mark. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users