[asterisk-users] asterisk hylafax iaxmodem
Hi, I have problems with asterisk and hylafax+ iaxmodem. I can successfully send faxes to Panasonic KX-FT932 fax, but with Xerox WorkCentre M20i I have problems: No carrier. This is hylafax log, maybe you can suggest me where to find ... Oct 17 07:38:48.22: [22428]: SESSION BEGIN 00041 180037052390906 Oct 17 07:38:48.22: [22428]: HylaFAX (tm) Version 4.4.2 Oct 17 07:38:48.22: [22428]: SEND FAX: JOB 27 DEST 37052390906 COMMID 00041 DEVICE '/dev/ttyIAX0' FROM 'root <[EMAIL PROTECTED]>' USER root Oct 17 07:38:48.22: [22428]: STATE CHANGE: RUNNING -> SENDING Oct 17 07:38:48.22: [22428]: <-- [12:AT+FCLASS=1\r] Oct 17 07:38:48.22: [22428]: --> [2:OK] Oct 17 07:38:48.22: [22428]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled Oct 17 07:38:48.22: [22428]: DIAL 37052390906 Oct 17 07:38:48.22: [22428]: <-- [16:ATDT37052390906\r] Oct 17 07:39:30.86: [22428]: --> [10:NO CARRIER] Oct 17 07:39:30.86: [22428]: SEND FAILED: JOB 27 DEST 37052390906 ERR [2] No carrier detected Oct 17 07:39:30.86: [22428]: SEND FAILED: JOB 27 DEST 37052390906 ERR [333] No carrier detected; too many attempts to dial Oct 17 07:39:31.86: [22428]: <-- [5:ATH0\r] Oct 17 07:39:31.86: [22428]: --> [2:OK] Oct 17 07:39:31.86: [22428]: MODEM set DTR OFF Oct 17 07:39:31.86: [22428]: MODEM set baud rate: 0 baud (flow control unchanged) Oct 17 07:39:31.86: [22428]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5) Oct 17 07:39:31.86: [22428]: SESSION END -- Pagarbiai / Best Regards, Giedrius Augys ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] asterisk hylafax iaxmodem
Giedrius Augys wrote: > Hi, > I have problems with asterisk and hylafax+ iaxmodem. I can successfully > send faxes to Panasonic KX-FT932 fax, but with Xerox WorkCentre M20i I > have problems: No carrier. This is hylafax log, maybe you can suggest > me where to find ... > > Oct 17 07:38:48.22: [22428]: SESSION BEGIN 00041 180037052390906 > Oct 17 07:38:48.22: [22428]: HylaFAX (tm) Version 4.4.2 > Oct 17 07:38:48.22: [22428]: SEND FAX: JOB 27 DEST 37052390906 COMMID > 00041 DEVICE '/dev/ttyIAX0' FROM 'root < [EMAIL PROTECTED]>' USER root > Oct 17 07:38:48.22: [22428]: STATE CHANGE: RUNNING -> SENDING > Oct 17 07:38:48.22: [22428]: <-- [12:AT+FCLASS=1\r] > Oct 17 07:38:48.22: [22428]: --> [2:OK] > Oct 17 07:38:48.22 : [22428]: MODEM set XON/XOFF/FLUSH: input ignored, > output disabled > Oct 17 07:38:48.22: [22428]: DIAL 37052390906 > Oct 17 07:38:48.22: [22428]: <-- [16:ATDT37052390906\r] > Oct 17 07:39:30.86: [22428]: --> [10:NO CARRIER] > Oct 17 07:39:30.86: [22428]: SEND FAILED: JOB 27 DEST 37052390906 ERR > [2] No carrier detected > Oct 17 07:39:30.86: [22428]: SEND FAILED: JOB 27 DEST 37052390906 ERR > [333] No carrier detected; too many attempts to dial > Oct 17 07:39:31.86: [22428]: <-- [5:ATH0\r] > Oct 17 07:39:31.86: [22428]: --> [2:OK] > Oct 17 07:39:31.86: [22428]: MODEM set DTR OFF > Oct 17 07:39:31.86: [22428]: MODEM set baud rate: 0 baud (flow control > unchanged) > Oct 17 07:39:31.86: [22428]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5) > Oct 17 07:39:31.86: [22428]: SESSION END > > > -- > Pagarbiai / Best Regards, > Giedrius Augys > > > > > ___ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users Please post your iaxmodem config file. Jonn ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] asterisk hylafax iaxmodem
CountryCode:1 AreaCode: 800 FAXNumber: +3705203230 LongDistancePrefix: 1 InternationalPrefix:011 DialStringRules:etc/dialrules ServerTracing: 0xFFF SessionTracing: 0xFFF RecvFileMode: 0600 LogFileMode:0600 DeviceMode: 0600 RingsBeforeAnswer: 1 SpeakerVolume: off GettyArgs: "-h %l dx_%s" LocalIdentifier:"Giedrius Augys" TagLineFont:etc/lutRS18.pcf TagLineFormat: "Nuo %%l|%c|Page %%P of %%T" MaxRecvPages: 200 # # # Modem-related stuff: should reflect modem command interface # and hardware connection/cabling (e.g. flow control). # ModemType: Class1 # use this to supply a hint # # Enabling this will use the hfaxd-protocol to set Caller*ID # #ModemSetOriginCmd: AT+VSID="%s","%d" # # If "glare" during initialization becomes a problem then take # the modem off-hook during initialization, and then place it # back on-hook when done. # #ModemResetCmds:"ATH1\nAT+VCID=1" # enables CallID display #ModemReadyCmds:ATH0 Class1AdaptRecvCmd: AT+FAR=1 Class1TMConnectDelay: 400 # counteract quick CONNECT response # # If you have trouble with V.17 receiving or sending, # you may want to enable one of these, respectively. # #Class1RMQueryCmd: "!24,48,72,96" # enable this to disable V.17receiving #Class1TMQueryCmd: "!24,48,72,96" # enable this to disable V.17sending # # You'll likely want Caller*ID display (also displays DID) enabled. # ModemResetCmds: AT+VCID=1 # enables CallID display # # The pty does not support changing parity. # PagerTTYParity: none # # If you are "missing" Caller*ID data on some calls (but not all) # and if you do not have adequate glare protection you may want to # not answer based on RINGs, but rather enable the CallIDAnswerLength # for NDID, disable AT+VCID=1 and do this: # #RingsBeforeAnswer: 0 #ModemRingResponse: AT+VRID=1 # Uncomment DATE and TIME if you really want them, but you probably don't. #CallIDPattern: "DATE=" #CallIDPattern: "TIME=" CallIDPattern: "NMBR=" CallIDPattern: "NAME=" CallIDPattern: "ANID=" #CallIDPattern: "USER="# username provided by call #CallIDPattern: "PASS="# password provided by call #CallIDPattern: "CDID="# DID context in call CallIDPattern: "NDID=" #CallIDAnswerLength:4 2007/10/17, Jonn R Taylor <[EMAIL PROTECTED]>: > > Giedrius Augys wrote: > > Hi, > > I have problems with asterisk and hylafax+ iaxmodem. I can successfully > > send faxes to Panasonic KX-FT932 fax, but with Xerox WorkCentre M20i I > > have problems: No carrier. This is hylafax log, maybe you can suggest > > me where to find ... > > > > Oct 17 07:38:48.22: [22428]: SESSION BEGIN 00041 180037052390906 > > Oct 17 07:38:48.22: [22428]: HylaFAX (tm) Version 4.4.2 > > Oct 17 07:38:48.22: [22428]: SEND FAX: JOB 27 DEST 37052390906 COMMID > > 00041 DEVICE '/dev/ttyIAX0' FROM 'root < [EMAIL PROTECTED]>' USER root > > Oct 17 07:38:48.22: [22428]: STATE CHANGE: RUNNING -> SENDING > > Oct 17 07:38:48.22: [22428]: <-- [12:AT+FCLASS=1\r] > > Oct 17 07:38:48.22: [22428]: --> [2:OK] > > Oct 17 07:38:48.22 : [22428]: MODEM set XON/XOFF/FLUSH: input ignored, > > output disabled > > Oct 17 07:38:48.22: [22428]: DIAL 37052390906 > > Oct 17 07:38:48.22: [22428]: <-- [16:ATDT37052390906\r] > > Oct 17 07:39:30.86: [22428]: --> [10:NO CARRIER] > > Oct 17 07:39:30.86: [22428]: SEND FAILED: JOB 27 DEST 37052390906 ERR > > [2] No carrier detected > > Oct 17 07:39:30.86: [22428]: SEND FAILED: JOB 27 DEST 37052390906 ERR > > [333] No carrier detected; too many attempts to dial > > Oct 17 07:39:31.86: [22428]: <-- [5:ATH0\r] > > Oct 17 07:39:31.86: [22428]: --> [2:OK] > > Oct 17 07:39:31.86: [22428]: MODEM set DTR OFF > > Oct 17 07:39:31.86: [22428]: MODEM set baud rate: 0 baud (flow control > > unchanged) > > Oct 17 07:39:31.86: [22428]: STATE CHANGE: SENDING -> MODEMWAIT (timeout > 5) > > Oct 17 07:39:31.86: [22428]: SESSION END > > > > > > -- > > Pagarbiai / Best Regards, > > Giedrius Augys > > > > > > > > > > ___ > > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > >http://lists.digium.com/mailman/listinfo/asterisk-users > Please post your iaxmodem config file. > > Jonn > > ___ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > -- Pagarbiai / Best Regards, Giedrius Augys
Re: [asterisk-users] asterisk hylafax iaxmodem
Witch interface are you using to send faxes, SIP, IAX, ZAP, MISDN,...,etc VoipCrazy 2007/10/17, Giedrius Augys <[EMAIL PROTECTED]>: > > CountryCode:1 > AreaCode: 800 > FAXNumber: +3705203230 > LongDistancePrefix: 1 > InternationalPrefix:011 > DialStringRules:etc/dialrules > ServerTracing: 0xFFF > SessionTracing: 0xFFF > RecvFileMode: 0600 > LogFileMode:0600 > DeviceMode: 0600 > RingsBeforeAnswer: 1 > SpeakerVolume: off > GettyArgs: "-h %l dx_%s" > LocalIdentifier:"Giedrius Augys" > TagLineFont:etc/lutRS18.pcf > TagLineFormat: "Nuo %%l|%c|Page %%P of %%T" > MaxRecvPages: 200 > # > # > # Modem-related stuff: should reflect modem command interface > # and hardware connection/cabling (e.g. flow control). > # > ModemType: Class1 # use this to supply a hint > > # > # Enabling this will use the hfaxd-protocol to set Caller*ID > # > #ModemSetOriginCmd: AT+VSID="%s","%d" > > # > # If "glare" during initialization becomes a problem then take > # the modem off-hook during initialization, and then place it > # back on-hook when done. > # > #ModemResetCmds:"ATH1\nAT+VCID=1" # enables CallID display > #ModemReadyCmds:ATH0 > > Class1AdaptRecvCmd: AT+FAR=1 > Class1TMConnectDelay: 400 # counteract quick CONNECT > response > > # > # If you have trouble with V.17 receiving or sending, > # you may want to enable one of these, respectively. > # > #Class1RMQueryCmd: "!24,48,72,96" # enable this to disable V.17receiving > #Class1TMQueryCmd: "!24,48,72,96" # enable this to disable V.17sending > > # > # You'll likely want Caller*ID display (also displays DID) enabled. > # > ModemResetCmds: AT+VCID=1 # enables CallID display > > # > # The pty does not support changing parity. > # > PagerTTYParity: none > > # > # If you are "missing" Caller*ID data on some calls (but not all) > # and if you do not have adequate glare protection you may want to > # not answer based on RINGs, but rather enable the CallIDAnswerLength > # for NDID, disable AT+VCID=1 and do this: > # > #RingsBeforeAnswer: 0 > #ModemRingResponse: AT+VRID=1 > > # Uncomment DATE and TIME if you really want them, but you probably don't. > #CallIDPattern: "DATE=" > #CallIDPattern: "TIME=" > CallIDPattern: "NMBR=" > CallIDPattern: "NAME=" > CallIDPattern: "ANID=" > #CallIDPattern: "USER="# username provided by call > #CallIDPattern: "PASS="# password provided by call > #CallIDPattern: "CDID="# DID context in call > CallIDPattern: "NDID=" > #CallIDAnswerLength:4 > > > > > 2007/10/17, Jonn R Taylor <[EMAIL PROTECTED]>: > > > > Giedrius Augys wrote: > > > Hi, > > > I have problems with asterisk and hylafax+ iaxmodem. I can > > successfully > > > send faxes to Panasonic KX-FT932 fax, but with Xerox WorkCentre M20i I > > > have problems: No carrier. This is hylafax log, maybe you can suggest > > > me where to find ... > > > > > > Oct 17 07:38:48.22: [22428]: SESSION BEGIN 00041 180037052390906 > > > Oct 17 07:38:48.22: [22428]: HylaFAX (tm) Version 4.4.2 > > > Oct 17 07:38:48.22: [22428]: SEND FAX: JOB 27 DEST 37052390906 COMMID > > > 00041 DEVICE '/dev/ttyIAX0' FROM 'root < [EMAIL PROTECTED]>' USER root > > > Oct 17 07:38:48.22: [22428]: STATE CHANGE: RUNNING -> SENDING > > > Oct 17 07:38:48.22: [22428]: <-- [12:AT+FCLASS=1\r] > > > Oct 17 07:38:48.22: [22428]: --> [2:OK] > > > Oct 17 07:38:48.22 : [22428]: MODEM set XON/XOFF/FLUSH: input ignored, > > > output disabled > > > Oct 17 07:38:48.22: [22428]: DIAL 37052390906 > > > Oct 17 07:38: 48.22: [22428]: <-- [16:ATDT37052390906\r] > > > Oct 17 07:39:30.86: [22428]: --> [10:NO CARRIER] > > > Oct 17 07:39:30.86: [22428]: SEND FAILED: JOB 27 DEST 37052390906 ERR > > > [2] No carrier detected > > > Oct 17 07:39: 30.86: [22428]: SEND FAILED: JOB 27 DEST 37052390906 ERR > > > [333] No carrier detected; too many attempts to dial > > > Oct 17 07:39:31.86: [22428]: <-- [5:ATH0\r] > > > Oct 17 07:39:31.86: [22428]: --> [2:OK] > > > Oct 17 07:39:31.86: [22428]: MODEM set DTR OFF > > > Oct 17 07:39:31.86: [22428]: MODEM set baud rate: 0 baud (flow control > > > unchanged) > > > Oct 17 07:39:31.86: [22428]: STATE CHANGE: SENDING -> MODEMWAIT > > (timeout 5) > > > Oct 17 07:39:31.86: [22428]: SESSION END > > > > > > > > > -- > > > Pagarbiai / Best Regards, > > > Giedrius Augys > > > > > > > > > > > > > > > > > ___ > > > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > > > > > asterisk-users mailing list > > > To UNSUBSCRIBE or update options visit: > > >http://lists.digium.com/mailman/listinfo/asterisk-users > > P
Re: [asterisk-users] asterisk hylafax iaxmodem
SIP, but I think I know whereis a problem. Fax is connected to d-link, and is turn on t.38 2007/10/17, voip crazy <[EMAIL PROTECTED]>: > > Witch interface are you using to send faxes, SIP, IAX, ZAP, MISDN,...,etc > > VoipCrazy > > > 2007/10/17, Giedrius Augys <[EMAIL PROTECTED]>: > > > > CountryCode:1 > > AreaCode: 800 > > FAXNumber: +3705203230 > > LongDistancePrefix: 1 > > InternationalPrefix:011 > > DialStringRules:etc/dialrules > > ServerTracing: 0xFFF > > SessionTracing: 0xFFF > > RecvFileMode: 0600 > > LogFileMode:0600 > > DeviceMode: 0600 > > RingsBeforeAnswer: 1 > > SpeakerVolume: off > > GettyArgs: "-h %l dx_%s" > > LocalIdentifier:"Giedrius Augys" > > TagLineFont:etc/lutRS18.pcf > > TagLineFormat: "Nuo %%l|%c|Page %%P of %%T" > > MaxRecvPages: 200 > > # > > # > > # Modem-related stuff: should reflect modem command interface > > # and hardware connection/cabling (e.g. flow control). > > # > > ModemType: Class1 # use this to supply a hint > > > > # > > # Enabling this will use the hfaxd-protocol to set Caller*ID > > # > > #ModemSetOriginCmd: AT+VSID="%s","%d" > > > > # > > # If "glare" during initialization becomes a problem then take > > # the modem off-hook during initialization, and then place it > > # back on-hook when done. > > # > > #ModemResetCmds:"ATH1\nAT+VCID=1" # enables CallID display > > > > #ModemReadyCmds:ATH0 > > > > Class1AdaptRecvCmd: AT+FAR=1 > > Class1TMConnectDelay: 400 # counteract quick CONNECT > > response > > > > # > > # If you have trouble with V.17 receiving or sending, > > # you may want to enable one of these, respectively. > > # > > #Class1RMQueryCmd: "!24,48,72,96" # enable this to disable > > V.17receiving > > #Class1TMQueryCmd: "!24,48,72,96" # enable this to disable V.17sending > > > > # > > # You'll likely want Caller*ID display (also displays DID) enabled. > > # > > ModemResetCmds: AT+VCID=1 # enables CallID display > > > > # > > # The pty does not support changing parity. > > # > > PagerTTYParity: none > > > > # > > # If you are "missing" Caller*ID data on some calls (but not all) > > # and if you do not have adequate glare protection you may want to > > # not answer based on RINGs, but rather enable the CallIDAnswerLength > > # for NDID, disable AT+VCID=1 and do this: > > # > > #RingsBeforeAnswer: 0 > > #ModemRingResponse: AT+VRID=1 > > > > # Uncomment DATE and TIME if you really want them, but you probably > > don't. > > #CallIDPattern: "DATE=" > > #CallIDPattern: "TIME=" > > CallIDPattern: "NMBR=" > > CallIDPattern: "NAME=" > > CallIDPattern: "ANID=" > > #CallIDPattern: "USER="# username provided by call > > #CallIDPattern: "PASS="# password provided by call > > #CallIDPattern: "CDID="# DID context in call > > CallIDPattern: "NDID=" > > #CallIDAnswerLength:4 > > > > > > > > > > 2007/10/17, Jonn R Taylor <[EMAIL PROTECTED] >: > > > > > > Giedrius Augys wrote: > > > > Hi, > > > > I have problems with asterisk and hylafax+ iaxmodem. I can > > > successfully > > > > send faxes to Panasonic KX-FT932 fax, but with Xerox WorkCentre M20i > > > I > > > > have problems: No carrier. This is hylafax log, maybe you can > > > suggest > > > > me where to find ... > > > > > > > > Oct 17 07:38:48.22: [22428]: SESSION BEGIN 00041 180037052390906 > > > > Oct 17 07:38:48.22: [22428]: HylaFAX (tm) Version 4.4.2 > > > > Oct 17 07:38:48.22: [22428]: SEND FAX: JOB 27 DEST 37052390906 > > > COMMID > > > > 00041 DEVICE '/dev/ttyIAX0' FROM 'root < [EMAIL PROTECTED]>' USER > > > > root > > > > Oct 17 07:38:48.22: [22428]: STATE CHANGE: RUNNING -> SENDING > > > > Oct 17 07:38:48.22: [22428]: <-- [12:AT+FCLASS=1\r] > > > > Oct 17 07:38:48.22: [22428]: --> [2:OK] > > > > Oct 17 07:38:48.22 : [22428]: MODEM set XON/XOFF/FLUSH: input > > > ignored, > > > > output disabled > > > > Oct 17 07:38:48.22: [22428]: DIAL 37052390906 > > > > Oct 17 07:38: 48.22: [22428]: <-- [16:ATDT37052390906\r] > > > > Oct 17 07:39:30.86: [22428]: --> [10:NO CARRIER] > > > > Oct 17 07:39:30.86: [22428]: SEND FAILED: JOB 27 DEST 37052390906 > > > ERR > > > > [2] No carrier detected > > > > Oct 17 07:39: 30.86: [22428]: SEND FAILED: JOB 27 DEST 37052390906 > > > ERR > > > > [333] No carrier detected; too many attempts to dial > > > > Oct 17 07:39:31.86: [22428]: <-- [5:ATH0\r] > > > > Oct 17 07:39:31.86: [22428]: --> [2:OK] > > > > Oct 17 07:39:31.86: [22428]: MODEM set DTR OFF > > > > Oct 17 07:39:31.86: [22428]: MODEM set baud rate: 0 baud (flow > > > control > > > > unchanged) > > > > Oct 17 07:39:31.86: [22428]: STATE CHANGE: SENDING -> MODEMWAIT > > > (timeout 5) > > > > Oct 17 07:39:31.86: [22428]: SESSION END > > > > > >
Re: [asterisk-users] asterisk hylafax iaxmodem
Giedrius Augys wrote: > I have problems with asterisk and hylafax+ iaxmodem. I can > successfully send faxes to Panasonic KX-FT932 fax, but with Xerox > WorkCentre M20i I have problems: No carrier. This is hylafax log, > maybe you can suggest me where to find ... > > Oct 17 07:38:48.22: [22428]: <-- [16:ATDT37052390906\r] > Oct 17 07:39:30.86: [22428]: --> [10:NO CARRIER] This is when you need to use the iaxmodem "record" feature (see the README file or http://iaxmodem.sourceforge.net/howto.php) to make recordings of the call and to examine the "iax" recording to see why it thinks that there is no fax signalling from the receiver. Or... you just send those recordings to me (the *.raw files that appear in /tmp/). Thanks, Lee. ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users