Re: [asterisk-users] polarity reverse
The feeling I have is the Sangoma A400 driver isn't queueing the event DAHDI_EVENT_POLARITY on each polarity reversal. File a bug report at issues.asterisk.org with all of your details, including sample dialplan and console output. The only option I think you have at the moment is to set answeronpolarityswitch=no and hanguponpolarityswitch=no, this will give you either dead air, or the caller will hear the CTU dialling out (which is comforting). Alec Davis -Original Message- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Justas Gulbinskas Sent: Wednesday, 7 April 2010 6:49 p.m. To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] polarity reverse I do not have the possibility to check does TDM800 works with asterisk 1.6.2. I checked i have this code in chan_dahdi file. But when I try to call, I get only chan_dahdi.c: Using channel 11 devicestate.c: device 'DAHDI/11-1' state '2' rtp.c: Channel 'DAHDI/11-1' has no RTP, not doing anything channel.c: Not copying variable DIALEDTIME. channel.c: Not copying variable ANSWEREDTIME. channel.c: Not copying variable DIALEDPEERNAME. channel.c: Not copying variable DIALEDPEERNUMBER. DEBUG[9730] channel.c: Not copying variable DIALSTATUS. DEBUG[9730] channel.c: Not copying variable SIPCALLID. DEBUG[9730] channel.c: Not copying variable SIPDOMAIN. DEBUG[9730] channel.c: Not copying variable SIPURI. DEBUG[9548] app_queue.c: Device 'DAHDI/11-1' changed to state '2' (In use) but we don't care because they're not a member of any queue. DEBUG[9730] chan_dahdi.c: Ignore possible polarity reversal on line seizure DEBUG[9730] chan_dahdi.c: Dialing '8685X' DEBUG[9730] chan_dahdi.c: Deferring dialing... VERBOSE[9730] app_dial.c: -- Called 11/8685X DEBUG[9544] devicestate.c: No provider found, checking channel drivers for DAHDI - 11 DEBUG[9544] channel.c: Avoiding initial deadlock for channel '0x1d81910' DEBUG[9730] channel.c: Set channel DAHDI/11-1 to read format slin DEBUG[9544] devicestate.c: Changing state for DAHDI/11 - state 2 (In use) DEBUG[9544] devicestate.c: device 'DAHDI/11' state '2' DEBUG[9730] channel.c: Set channel SIP/XXX-000b to write format slin DEBUG[9730] channel.c: Set channel SIP/XXX-000b to read format slin DEBUG[9730] channel.c: Set channel DAHDI/11-1 to write format slin DEBUG[9548] app_queue.c: Device 'DAHDI/11' changed to state '2' (In use) but we don't care because they're not a member of any queue. DEBUG[9730] chan_dahdi.c: Exception on 15, channel 11 DEBUG[9730] chan_dahdi.c: Got event Hook Transition Complete(12) on channel 11 (index 0) DEBUG[9730] chan_dahdi.c: Sent deferred digit string: T8685Xw DEBUG[9730] chan_dahdi.c: Exception on 15, channel 11 DEBUG[9730] chan_dahdi.c: Got event Dial Complete(9) on channel 11 (index 0) DEBUG[9730] chan_dahdi.c: No echo cancellation requested DEBUG[9730] chan_dahdi.c: Exception on 15, channel 11 DEBUG[9730] chan_dahdi.c: Got event On hook(1) on channel 11 (index 0) DEBUG[9730] channel.c: Hanging up channel 'DAHDI/11-1' DEBUG[9730] chan_dahdi.c: dahdi_hangup(DAHDI/11-1) DEBUG[9730] chan_dahdi.c: Hangup: channel: 11 index = 0, normal = 15, callwait = -1, thirdcall = -1 DEBUG[9730] chan_dahdi.c: Set option TDD MODE, value: OFF(0) on DAHDI/11-1 DEBUG[9730] chan_dahdi.c: Updated conferencing on 11, with 0 conference users VERBOSE[9730] chan_dahdi.c: -- Hungup 'DAHDI/11-1' On Wednesday, April 07, 2010, at 12:17AM, "Alec Davis" wrote: >Does TDM800 with FXO ports work with 1.6.2? > >You should have also got other 'polarity related messages' during the >call setup. >One in particluar which prints debug info when a DAHDI_EVENT_POLARITY >get fired. > >Code below. > >ast_debug(1, "Polarity Reversal event occured - DEBUG 2: channel %d, >state %d, pol= %d, aonp= %d, honp= %d, pdelay= %d, tv= %d\n", >p->channel, >ast->_state, p->polarity, p->answeronpolarityswitch, >p->hanguponpolarityswitch, p->polarityonanswerdelay, >ast_tvdiff_ms(ast_tvnow(), p->polaritydelaytv) ); > >If it doesn't work with the TDM800, file a bug report. > >Alec > > >-Original Message- >From: asterisk-users-boun...@lists.digium.com >[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Justas >Gulbinskas >Sent: Wednesday, 7 April 2010 8:00 a.m. >To: Asterisk Users Mailing List - Non-Commercial Discussion >Subject: Re: [asterisk-users] polarity reverse > >call not succsessful. > >I use nokia gsm gw witch have polarity reverse i try on my old asterisk >1.4.17 with digium tdm800 with fxo ports card polarity reverse works fine. >But then i connect to asterisk 1.6.2 with sangoma a400 with
Re: [asterisk-users] polarity reverse
I do not have the possibility to check does TDM800 works with asterisk 1.6.2. I checked i have this code in chan_dahdi file. But when I try to call, I get only chan_dahdi.c: Using channel 11 devicestate.c: device 'DAHDI/11-1' state '2' rtp.c: Channel 'DAHDI/11-1' has no RTP, not doing anything channel.c: Not copying variable DIALEDTIME. channel.c: Not copying variable ANSWEREDTIME. channel.c: Not copying variable DIALEDPEERNAME. channel.c: Not copying variable DIALEDPEERNUMBER. DEBUG[9730] channel.c: Not copying variable DIALSTATUS. DEBUG[9730] channel.c: Not copying variable SIPCALLID. DEBUG[9730] channel.c: Not copying variable SIPDOMAIN. DEBUG[9730] channel.c: Not copying variable SIPURI. DEBUG[9548] app_queue.c: Device 'DAHDI/11-1' changed to state '2' (In use) but we don't care because they're not a member of any queue. DEBUG[9730] chan_dahdi.c: Ignore possible polarity reversal on line seizure DEBUG[9730] chan_dahdi.c: Dialing '8685X' DEBUG[9730] chan_dahdi.c: Deferring dialing... VERBOSE[9730] app_dial.c: -- Called 11/8685X DEBUG[9544] devicestate.c: No provider found, checking channel drivers for DAHDI - 11 DEBUG[9544] channel.c: Avoiding initial deadlock for channel '0x1d81910' DEBUG[9730] channel.c: Set channel DAHDI/11-1 to read format slin DEBUG[9544] devicestate.c: Changing state for DAHDI/11 - state 2 (In use) DEBUG[9544] devicestate.c: device 'DAHDI/11' state '2' DEBUG[9730] channel.c: Set channel SIP/XXX-000b to write format slin DEBUG[9730] channel.c: Set channel SIP/XXX-000b to read format slin DEBUG[9730] channel.c: Set channel DAHDI/11-1 to write format slin DEBUG[9548] app_queue.c: Device 'DAHDI/11' changed to state '2' (In use) but we don't care because they're not a member of any queue. DEBUG[9730] chan_dahdi.c: Exception on 15, channel 11 DEBUG[9730] chan_dahdi.c: Got event Hook Transition Complete(12) on channel 11 (index 0) DEBUG[9730] chan_dahdi.c: Sent deferred digit string: T8685Xw DEBUG[9730] chan_dahdi.c: Exception on 15, channel 11 DEBUG[9730] chan_dahdi.c: Got event Dial Complete(9) on channel 11 (index 0) DEBUG[9730] chan_dahdi.c: No echo cancellation requested DEBUG[9730] chan_dahdi.c: Exception on 15, channel 11 DEBUG[9730] chan_dahdi.c: Got event On hook(1) on channel 11 (index 0) DEBUG[9730] channel.c: Hanging up channel 'DAHDI/11-1' DEBUG[9730] chan_dahdi.c: dahdi_hangup(DAHDI/11-1) DEBUG[9730] chan_dahdi.c: Hangup: channel: 11 index = 0, normal = 15, callwait = -1, thirdcall = -1 DEBUG[9730] chan_dahdi.c: Set option TDD MODE, value: OFF(0) on DAHDI/11-1 DEBUG[9730] chan_dahdi.c: Updated conferencing on 11, with 0 conference users VERBOSE[9730] chan_dahdi.c: -- Hungup 'DAHDI/11-1' On Wednesday, April 07, 2010, at 12:17AM, "Alec Davis" wrote: >Does TDM800 with FXO ports work with 1.6.2? > >You should have also got other 'polarity related messages' during the call >setup. >One in particluar which prints debug info when a DAHDI_EVENT_POLARITY get >fired. > >Code below. > >ast_debug(1, "Polarity Reversal event occured - DEBUG 2: channel %d, state >%d, pol= %d, aonp= %d, honp= %d, pdelay= %d, tv= %d\n", p->channel, >ast->_state, p->polarity, p->answeronpolarityswitch, >p->hanguponpolarityswitch, p->polarityonanswerdelay, >ast_tvdiff_ms(ast_tvnow(), p->polaritydelaytv) ); > >If it doesn't work with the TDM800, file a bug report. > >Alec > > >-Original Message- >From: asterisk-users-boun...@lists.digium.com >[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Justas >Gulbinskas >Sent: Wednesday, 7 April 2010 8:00 a.m. >To: Asterisk Users Mailing List - Non-Commercial Discussion >Subject: Re: [asterisk-users] polarity reverse > >call not succsessful. > >I use nokia gsm gw witch have polarity reverse i try on my old asterisk >1.4.17 with digium tdm800 with fxo ports card polarity reverse works fine. >But then i connect to asterisk 1.6.2 with sangoma a400 with fxo ports card >polarity don't work. >polarity reverse is 600 milliseconds set on nokia gsm gw > >On Apr 6, 2010, at 10:08 PM, Alec Davis wrote: > >> Is the call successfull? >> The 'Ignore polarity reversal on line seizure' may just be a warning. >> >> What equipment, which Telco is the FXO card connected to? >> >> Alec Davis >> >> >> -Original Message- >> From: asterisk-users-boun...@lists.digium.com >> [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Justas >> Gulbinskas >> Sent: Wednesday, 7 April 2010 12:03 a.m. >> To: asterisk-users@lists.digium.com >> Subject: [asterisk-users] polarity reverse >> >
Re: [asterisk-users] polarity reverse
Does TDM800 with FXO ports work with 1.6.2? You should have also got other 'polarity related messages' during the call setup. One in particluar which prints debug info when a DAHDI_EVENT_POLARITY get fired. Code below. ast_debug(1, "Polarity Reversal event occured - DEBUG 2: channel %d, state %d, pol= %d, aonp= %d, honp= %d, pdelay= %d, tv= %d\n", p->channel, ast->_state, p->polarity, p->answeronpolarityswitch, p->hanguponpolarityswitch, p->polarityonanswerdelay, ast_tvdiff_ms(ast_tvnow(), p->polaritydelaytv) ); If it doesn't work with the TDM800, file a bug report. Alec -Original Message- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Justas Gulbinskas Sent: Wednesday, 7 April 2010 8:00 a.m. To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] polarity reverse call not succsessful. I use nokia gsm gw witch have polarity reverse i try on my old asterisk 1.4.17 with digium tdm800 with fxo ports card polarity reverse works fine. But then i connect to asterisk 1.6.2 with sangoma a400 with fxo ports card polarity don't work. polarity reverse is 600 milliseconds set on nokia gsm gw On Apr 6, 2010, at 10:08 PM, Alec Davis wrote: > Is the call successfull? > The 'Ignore polarity reversal on line seizure' may just be a warning. > > What equipment, which Telco is the FXO card connected to? > > Alec Davis > > > -Original Message- > From: asterisk-users-boun...@lists.digium.com > [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Justas > Gulbinskas > Sent: Wednesday, 7 April 2010 12:03 a.m. > To: asterisk-users@lists.digium.com > Subject: [asterisk-users] polarity reverse > > Hi, > > I have a problem with polarity reverse > > this my dahdi config > > [channels] > context=default > usecallerid=yes > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > relaxdtmf=yes > rxgain=0.0 > txgain=0.0 > group=1 > callgroup=1 > pickupgroup=1 > immediate=no > answeronpolarityswitch=yes > > I use asterisk 1.6.2 and sangoma a400 fxo ports. > Then i try call i get chan_dahdi.c: Ignore possible polarity reversal > on line seizure > > > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] polarity reverse
call not succsessful. I use nokia gsm gw witch have polarity reverse i try on my old asterisk 1.4.17 with digium tdm800 with fxo ports card polarity reverse works fine. But then i connect to asterisk 1.6.2 with sangoma a400 with fxo ports card polarity don't work. polarity reverse is 600 milliseconds set on nokia gsm gw On Apr 6, 2010, at 10:08 PM, Alec Davis wrote: > Is the call successfull? > The 'Ignore polarity reversal on line seizure' may just be a warning. > > What equipment, which Telco is the FXO card connected to? > > Alec Davis > > > -Original Message- > From: asterisk-users-boun...@lists.digium.com > [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Justas > Gulbinskas > Sent: Wednesday, 7 April 2010 12:03 a.m. > To: asterisk-users@lists.digium.com > Subject: [asterisk-users] polarity reverse > > Hi, > > I have a problem with polarity reverse > > this my dahdi config > > [channels] > context=default > usecallerid=yes > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > relaxdtmf=yes > rxgain=0.0 > txgain=0.0 > group=1 > callgroup=1 > pickupgroup=1 > immediate=no > answeronpolarityswitch=yes > > I use asterisk 1.6.2 and sangoma a400 fxo ports. > Then i try call i get chan_dahdi.c: Ignore possible polarity reversal on > line seizure > > > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to > Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > -- > _ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] polarity reverse
Is the call successfull? The 'Ignore polarity reversal on line seizure' may just be a warning. What equipment, which Telco is the FXO card connected to? Alec Davis -Original Message- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Justas Gulbinskas Sent: Wednesday, 7 April 2010 12:03 a.m. To: asterisk-users@lists.digium.com Subject: [asterisk-users] polarity reverse Hi, I have a problem with polarity reverse this my dahdi config [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no answeronpolarityswitch=yes I use asterisk 1.6.2 and sangoma a400 fxo ports. Then i try call i get chan_dahdi.c: Ignore possible polarity reversal on line seizure -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] polarity reverse
Hi, I have a problem with polarity reverse this my dahdi config [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no answeronpolarityswitch=yes I use asterisk 1.6.2 and sangoma a400 fxo ports. Then i try call i get chan_dahdi.c: Ignore possible polarity reversal on line seizure -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users