Re: [Asterisk-Users] Mitel 5055 phone
Hi, I have a Mitel 5055 working quite well with *, so I'll try to answer some of these questions.. I'd like to find out more about it too.. Are the buttons programmable as line appearances and speed dials too? Does anyone have one working as a standalone SIP phone with no Mitel PBX/other hardware in the mix? The 7 softkeys are programmable as speed dial using either digits or SIP URLs, via the built-in web server. There are 4 line keys but they aren't programmable. It has all the usual buttons like headset/mic/speaker, transfer, conf, phonebook, superkey (menu), etc. It supports G711 u-Law and a-Law, and G729a. The 5055 is designed to work fairly well as a standalone device (i.e. without any pbx involved), although I've never used mine that way. There is built-in dial plan stuff, phonebook, etc, and it can have up to 4 users with different profiles as well. I am working with one now. As far as I have gotten is that I can authenticate against asterisk but then can't make a call. I will be spending more time on this this week. Too many projects. You may need newer firmware, but if it has actually authenticated, it should work fine. My issues were all in getting it to auth properly. If you go into the web interface, and look under Registration, there is a status display which should say something like "registered to ". For reference, I have the 5055 set up with the following under User Config: User ID: segfault SIP Auth User Name: segfault Password: 12345 < obviously not the real thing :) > and these under SIP Config: SIP Proxy: SIP Registration Server: Auth Method: digest Transport Protocol: UDP Symmetric UDP: on Under Network Config, I have assigned it a static address and routing info, but that shouldn't matter. Here's the sip.conf entry for it: [segfault] type=friend username=segfault secret=12345 host=dynamic canreinvite=no qualify=no context=local dtmfmode=rfc2833 mailbox=200 Please post your summary to the list when you are completed. Another decent higher-end phone is good news for everyone, and if you can find out the specifics of why the Mitel doesn't work with *, perhaps the rest of the community can come up with some patch ideas. As I noted above, it should work fine. Hope this helps. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Mitel 5055 phone
-Original Message- From: Paul Crick [mailto:[EMAIL PROTECTED] Sent: Tuesday, October 14, 2003 2:42 PM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] Mitel 5055 phone I'd like to find out more about it too.. Are the buttons programmable as line appearances and speed dials too? Does anyone have one working as a standalone SIP phone with no Mitel PBX/other hardware in the mix? I've worked extensively on SX2000's and have to say I love those systems (anyone need any work doing on one?!) Cheers Paul [messages re-ordered] I am working with one now. As far as I have gotten is that I can authenticate against asterisk but then can't make a call. I will be spending more time on this this week. Too many projects. I don't know what price you're looking at but Mitel just dropped the price of these phones to be pretty much the same as their regular Minet IP phones so they may be even cheaper than you think. Also early next year Mitel will be releasing new software for their 5220 phone which will allow it to dual boot between Minet and SIP. Barry Barry - Please post your summary to the list when you are completed. Another decent higher-end phone is good news for everyone, and if you can find out the specifics of why the Mitel doesn't work with *, perhaps the rest of the community can come up with some patch ideas. JT ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Mitel 5055 phone
Where did you get your 5055? I've tried to order it from 2 separate vendors and they both tell me it will be at least a month before they get any in. MATT--- -Original Message- From: Barry Porch [mailto:[EMAIL PROTECTED] Sent: Tuesday, October 14, 2003 4:48 PM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] Mitel 5055 phone I am working with one now. As far as I have gotten is that I can authenticate against asterisk but then can't make a call. I will be spending more time on this this week. Too many projects. I don't know what price you're looking at but Mitel just dropped the price of these phones to be pretty much the same as their regular Minet IP phones so they may be even cheaper than you think. Also early next year Mitel will be releasing new software for their 5220 phone which will allow it to dual boot between Minet and SIP. Barry -Original Message- From: Paul Crick [mailto:[EMAIL PROTECTED] Sent: Tuesday, October 14, 2003 2:42 PM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] Mitel 5055 phone I'd like to find out more about it too.. Are the buttons programmable as line appearances and speed dials too? Does anyone have one working as a standalone SIP phone with no Mitel PBX/other hardware in the mix? I've worked extensively on SX2000's and have to say I love those systems (anyone need any work doing on one?!) Cheers Paul ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Mitel 5055 phone
I am working with one now. As far as I have gotten is that I can authenticate against asterisk but then can't make a call. I will be spending more time on this this week. Too many projects. I don't know what price you're looking at but Mitel just dropped the price of these phones to be pretty much the same as their regular Minet IP phones so they may be even cheaper than you think. Also early next year Mitel will be releasing new software for their 5220 phone which will allow it to dual boot between Minet and SIP. Barry -Original Message- From: Paul Crick [mailto:[EMAIL PROTECTED] Sent: Tuesday, October 14, 2003 2:42 PM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] Mitel 5055 phone I'd like to find out more about it too.. Are the buttons programmable as line appearances and speed dials too? Does anyone have one working as a standalone SIP phone with no Mitel PBX/other hardware in the mix? I've worked extensively on SX2000's and have to say I love those systems (anyone need any work doing on one?!) Cheers Paul ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Mitel 5055 phone
I'd like to find out more about it too.. Are the buttons programmable as line appearances and speed dials too? Does anyone have one working as a standalone SIP phone with no Mitel PBX/other hardware in the mix? I've worked extensively on SX2000's and have to say I love those systems (anyone need any work doing on one?!) Cheers Paul ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
