RE: [Asterisk-Users] RE: current version
CallManager uses Cisco's own SCCP aka Skinny Protocol, not H323. Asterisk has two SCCP channel drivers available. One is included with Asterisk, one is available for download from somewhere (check the mailing list archives). I don't know if they work with CallManager or now, I *think* they were designed for use with SCCP only phones, but I'm not sure. On Sun, 2004-01-18 at 22:16, Ray Burkholder wrote: Will the other chan_oh323 work? Quoting Brian West [EMAIL PROTECTED]: You can't use chan_h323 with call manager. bkw ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] RE: current version
Eric Wieling ([EMAIL PROTECTED]) wrote: CallManager uses Cisco's own SCCP aka Skinny Protocol, not H323. Asterisk has two SCCP channel drivers available. One is included with Asterisk, one is available for download from somewhere (check the mailing list archives). I don't know if they work with CallManager or now, I *think* they were designed for use with SCCP only phones, but I'm not sure. as we are currently working on the chan_sccp we will address this sooner or later. --jan -- Jan Czmok, Network Engineering Support, Global Access Telecomm, Inc. Ph.: +49 69 299896-35 - fax: +49 69 299896-40 - sip:[EMAIL PROTECTED] ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] RE: current version
To be clear I meant using Chan)_h323 with Call Manager where CM is configured with * as a H.323 gateway, not client. CM supports H.323 to direct calls through gateways, and in fact until recently that is all they supported. They now also have MGCP, but only to their IOS platforms, and SIP is coming soon. There are NO sccp-based gateways, from Cisco anyways. Dan -Original Message- From: Eric Wieling [mailto:[EMAIL PROTECTED] Sent: Monday, January 19, 2004 6:33 AM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] RE: current version CallManager uses Cisco's own SCCP aka Skinny Protocol, not H323. Asterisk has two SCCP channel drivers available. One is included with Asterisk, one is available for download from somewhere (check the mailing list archives). I don't know if they work with CallManager or now, I *think* they were designed for use with SCCP only phones, but I'm not sure. On Sun, 2004-01-18 at 22:16, Ray Burkholder wrote: Will the other chan_oh323 work? Quoting Brian West [EMAIL PROTECTED]: You can't use chan_h323 with call manager. bkw ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] RE: current version
I appreciate all your feedbacks, but they seems to have diverted from my original question which was I have been using Asterisk 10 days ago version loaded onto my Redhat 7.3 with kernel 2.4.18-3 running Jeremy's h323 driver. It has been running okay with a bit of problems, like system crashing after certain period of time with 15 simultaneous calls or so. I have tried to load up the current version today again (0.7.1 I guess) and apparently with the new H323 driver as well. I have recompiled the H323 libraries with version Pwlib1.5.2 and Openh3231.12.2 as recommended. However, no call was able to get through at all. I have tried this before when 0.7.0 came out when had the same result, I thought there were bugs, but now I am getting the same thing. I have tried using the same h323.conf configuration as well as trying to change a couple of faststart.parameters, but same result. So, rather I would appreciate any assistance and feedback in related to running Asterisk version 0.7.1 with the most current H323 driver compiled with the current version of OpenH323 libraries. I wonder if any associates out there who have had success running H323 with this, thanks ! Tom -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Dan Austin Sent: Monday, January 19, 2004 12:57 PM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] RE: current version To be clear I meant using Chan)_h323 with Call Manager where CM is configured with * as a H.323 gateway, not client. CM supports H.323 to direct calls through gateways, and in fact until recently that is all they supported. They now also have MGCP, but only to their IOS platforms, and SIP is coming soon. There are NO sccp-based gateways, from Cisco anyways. Dan -Original Message- From: Eric Wieling [mailto:[EMAIL PROTECTED] Sent: Monday, January 19, 2004 6:33 AM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] RE: current version CallManager uses Cisco's own SCCP aka Skinny Protocol, not H323. Asterisk has two SCCP channel drivers available. One is included with Asterisk, one is available for download from somewhere (check the mailing list archives). I don't know if they work with CallManager or now, I *think* they were designed for use with SCCP only phones, but I'm not sure. On Sun, 2004-01-18 at 22:16, Ray Burkholder wrote: Will the other chan_oh323 work? Quoting Brian West [EMAIL PROTECTED]: You can't use chan_h323 with call manager. bkw ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.563 / Virus Database: 355 - Release Date: 1/17/2004 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.563 / Virus Database: 355 - Release Date: 1/17/2004 ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] RE: current version
Title: RE: [Asterisk-Users] capacity testing I tried to use it to create a trunk to Ciscos call manager. The 0.7.1 code worked up to a point. The call would be established, but audio was one-way from the Call Manager. Asterisk with Chan_h323 would not setup the sending rtp stream. The debug results showed the sending stream as using ip:0.0.0.0 I have not checked for a CVS update to see if it is fixed, or if that might just be a quirk when connected to Call Manager. Chan_oh323 works fine with Call Manager. Dan From: T. Chan [mailto:[EMAIL PROTECTED] Sent: Sunday, January 18, 2004 5:55 PM To: [EMAIL PROTECTED] Cc: Alan Chan Subject: [Asterisk-Users] RE: current version Dear All, I have been using Asterisk 10 days ago version loaded onto my Redhat 7.3 with kernel 2.4.18-3 running Jeremy's h323 driver. It has been running okay with a bit of problems, like system crashing after certain period of time with 15 simultaneous calls or so. I have tried to load up the current version today again (0.7.1 I guess) and apparently with the new H323 driver as well. I have recompiled the H323 libraries with version Pwlib1.5.2 and Openh3231.12.2 as recommended. However, no call was able to get through at all. I have tried this before when 0.7.0 came out when had the same result, I thought there were bugs, but now I am getting the same thing. I have tried using the same h323.conf configuration as well as trying to change a couple of faststart.parameters, but same result. Is there anyone who has had good experience with the new version of Asterisk 0.7.1 with the most current Jeremy H323 driver? Please suggest, thanks Tom
RE: [Asterisk-Users] RE: current version
You can't use chan_h323 with call manager. bkw On Sun, 18 Jan 2004, Dan Austin wrote: I tried to use it to create a 'trunk' to Cisco's call manager. The 0.7.1 code worked up to a point. The call would be established, but audio was one-way from the Call Manager. Asterisk with Chan_h323 would not setup the sending rtp stream. The debug results showed the sending stream as using ip:0.0.0.0 I have not checked for a CVS update to see if it is fixed, or if that might just be a quirk when connected to Call Manager. Chan_oh323 works fine with Call Manager. Dan _ From: T. Chan [mailto:[EMAIL PROTECTED] Sent: Sunday, January 18, 2004 5:55 PM To: [EMAIL PROTECTED] Cc: Alan Chan Subject: [Asterisk-Users] RE: current version Dear All, I have been using Asterisk 10 days ago version loaded onto my Redhat 7.3 with kernel 2.4.18-3 running Jeremy's h323 driver. It has been running okay with a bit of problems, like system crashing after certain period of time with 15 simultaneous calls or so. I have tried to load up the current version today again (0.7.1 I guess) and apparently with the new H323 driver as well. I have recompiled the H323 libraries with version Pwlib1.5.2 and Openh3231.12.2 as recommended. However, no call was able to get through at all. I have tried this before when 0.7.0 came out when had the same result, I thought there were bugs, but now I am getting the same thing. I have tried using the same h323.conf configuration as well as trying to change a couple of faststart.parameters, but same result. Is there anyone who has had good experience with the new version of Asterisk 0.7.1 with the most current Jeremy H323 driver? Please suggest, thanks Tom ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] RE: current version
Will the other chan_oh323 work? Quoting Brian West [EMAIL PROTECTED]: You can't use chan_h323 with call manager. bkw On Sun, 18 Jan 2004, Dan Austin wrote: I tried to use it to create a 'trunk' to Cisco's call manager. The 0.7.1 code worked up to a point. The call would be established, but audio was one-way from the Call Manager. Asterisk with Chan_h323 would not setup the sending rtp stream. The debug results showed the sending stream as using ip:0.0.0.0 I have not checked for a CVS update to see if it is fixed, or if that might just be a quirk when connected to Call Manager. Chan_oh323 works fine with Call Manager. Dan _ From: T. Chan [mailto:[EMAIL PROTECTED] Sent: Sunday, January 18, 2004 5:55 PM To: [EMAIL PROTECTED] Cc: Alan Chan Subject: [Asterisk-Users] RE: current version Dear All, I have been using Asterisk 10 days ago version loaded onto my Redhat 7.3 with kernel 2.4.18-3 running Jeremy's h323 driver. It has been running okay with a bit of problems, like system crashing after certain period of time with 15 simultaneous calls or so. I have tried to load up the current version today again (0.7.1 I guess) and apparently with the new H323 driver as well. I have recompiled the H323 libraries with version Pwlib1.5.2 and Openh3231.12.2 as recommended. However, no call was able to get through at all. I have tried this before when 0.7.0 came out when had the same result, I thought there were bugs, but now I am getting the same thing. I have tried using the same h323.conf configuration as well as trying to change a couple of faststart.parameters, but same result. Is there anyone who has had good experience with the new version of Asterisk 0.7.1 with the most current Jeremy H323 driver? Please suggest, thanks Tom ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Scanned for viruses and dangerous content at http://www.oneunified.net and is believed to be clean. Ray Burkholder 704 644 6999 x2002 http://www.oneunified.net [EMAIL PROTECTED] - This mail sent through IMP: http://horde.org/imp/ -- Scanned for viruses and dangerous content at http://www.oneunified.net and is believed to be clean. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] RE: current version
Will either of the h323 channels work with gatekeepers properly? Ie, reregister through * reloads and such? I've had problems with chan_h323 in this regard. Chan_h323 will register fine with a gnugk first time around. But after a reload, it loses its connection. Or should I try downloading the latest version yet again to see if it is fixed? Quoting Brian West [EMAIL PROTECTED]: You can't use chan_h323 with call manager. bkw On Sun, 18 Jan 2004, Dan Austin wrote: I tried to use it to create a 'trunk' to Cisco's call manager. The 0.7.1 code worked up to a point. The call would be established, but audio was one-way from the Call Manager. Asterisk with Chan_h323 would not setup the sending rtp stream. The debug results showed the sending stream as using ip:0.0.0.0 I have not checked for a CVS update to see if it is fixed, or if that might just be a quirk when connected to Call Manager. Chan_oh323 works fine with Call Manager. Dan _ From: T. Chan [mailto:[EMAIL PROTECTED] Sent: Sunday, January 18, 2004 5:55 PM To: [EMAIL PROTECTED] Cc: Alan Chan Subject: [Asterisk-Users] RE: current version Dear All, I have been using Asterisk 10 days ago version loaded onto my Redhat 7.3 with kernel 2.4.18-3 running Jeremy's h323 driver. It has been running okay with a bit of problems, like system crashing after certain period of time with 15 simultaneous calls or so. I have tried to load up the current version today again (0.7.1 I guess) and apparently with the new H323 driver as well. I have recompiled the H323 libraries with version Pwlib1.5.2 and Openh3231.12.2 as recommended. However, no call was able to get through at all. I have tried this before when 0.7.0 came out when had the same result, I thought there were bugs, but now I am getting the same thing. I have tried using the same h323.conf configuration as well as trying to change a couple of faststart.parameters, but same result. Is there anyone who has had good experience with the new version of Asterisk 0.7.1 with the most current Jeremy H323 driver? Please suggest, thanks Tom ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Scanned for viruses and dangerous content at http://www.oneunified.net and is believed to be clean. Ray Burkholder 704 644 6999 x2002 http://www.oneunified.net [EMAIL PROTECTED] - This mail sent through IMP: http://horde.org/imp/ -- Scanned for viruses and dangerous content at http://www.oneunified.net and is believed to be clean. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
