RE: [Asterisk-Users] TDM400P off-hook detection problem
Your card must be a TDM with 4 FXS ports. FXO port is to connect and analog line, and FXS port is for connect analog phone. Are you sure that in 3rd and 4th ports you have immediate=no? regards, srsergio -Mensaje original- De: Alex Ongena [mailto:[EMAIL PROTECTED] Enviado el: jueves, 13 de octubre de 2005 11:17 Para: Asterisk Asunto: [Asterisk-Users] TDM400P off-hook detection problem Hi list, I have a Wildcard TDM400P REV I Board 1 with 4 FXO modules and * 1.0.9 up-and-running. Only 2 FXO ports are used for 2 analog phones and are doing fine. I now wanted to use the 3rd and 4th port, but when I insert an analog phone, take it off hook, I do not get a dial tone. With my 1st and 2nd port, I get messages like: -- Starting simple switch on 'Zap/13-1' -- Hungup 'Zap/13-1' on my CLI, but with port 3 and 4, I don't see anything. I have tried with the same phone that works well in port 1 and 2, so it's not related to the phone. The configuration for port 3 and 4 is idential to 1 and 2. zap show channel xx does not show anything special and what it show is identical between port 1,2 and 3,4. It's a production system, so it's not easy to stop and start troubleshooting it, certainly not easy to open and swap modules Anybody seen something similar ? Thank Alex -- NEW: aXs GUARD hands-on Trainings v.7.0 more info at http://www.axsguard.com/indextraining.htm aXs GUARD has completed security and anti-virus checks on this e-mail (http://www.axsguard.com) --- Able NV: ond.nr 0457.938.087 ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.11.14/131 - Release Date: 12/10/2005 ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TDM400P off-hook detection problem
On Thu, 2005-10-13 at 12:44 +0200, Sergio Serrano wrote: Your card must be a TDM with 4 FXS ports. FXO port is to connect and analog line, and FXS port is for connect analog phone. sorry, my mistake, these are all FXS ports with FXO signaling. I always mix them up. Are you sure that in 3rd and 4th ports you have immediate=no? my zapate.conf file: (channel 13 and 14 are ok, 15 and 16 give problems) [channels] ; Default language language=be callerid=asreceived immediate=no switchtype=euroisdn ; ; Poort 1-2 gaan naar de PBX ; context=isdn-pbx signalling=bri_net group=2 channel = 1-2,4-5 echocancel = yes ; ; Poort 3-4 gaan naar Publiek net ; context=isdn-public signalling = bri_cpe group=1 channel = 7-8,10-11 ; ; TDM40B kanalen ; signalling=fxo_ks language=be context=analog echocancel=no channel = 13 signalling=fxo_ks language=be context=analog channel = 14 signalling=fxo_ks language=be context=analog channel = 15 signalling=fxo_ks language=be context=analog channel = 16 Thanks already alex regards, srsergio -Mensaje original- De: Alex Ongena [mailto:[EMAIL PROTECTED] Enviado el: jueves, 13 de octubre de 2005 11:17 Para: Asterisk Asunto: [Asterisk-Users] TDM400P off-hook detection problem Hi list, I have a Wildcard TDM400P REV I Board 1 with 4 FXO modules and * 1.0.9 up-and-running. Only 2 FXO ports are used for 2 analog phones and are doing fine. I now wanted to use the 3rd and 4th port, but when I insert an analog phone, take it off hook, I do not get a dial tone. With my 1st and 2nd port, I get messages like: -- Starting simple switch on 'Zap/13-1' -- Hungup 'Zap/13-1' on my CLI, but with port 3 and 4, I don't see anything. I have tried with the same phone that works well in port 1 and 2, so it's not related to the phone. The configuration for port 3 and 4 is idential to 1 and 2. zap show channel xx does not show anything special and what it show is identical between port 1,2 and 3,4. It's a production system, so it's not easy to stop and start troubleshooting it, certainly not easy to open and swap modules Anybody seen something similar ? Thank Alex -- NEW: aXs GUARD hands-on Trainings v.7.0 more info at http://www.axsguard.com/indextraining.htm aXs GUARD has completed security and anti-virus checks on this e-mail (http://www.axsguard.com) --- Able NV: ond.nr 0457.938.087 ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.11.14/131 - Release Date: 12/10/2005 ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- NEW: aXs GUARD hands-on Trainings v.7.0 more info at http://www.axsguard.com/indextraining.htm aXs GUARD has completed security and anti-virus checks on this e-mail (http://www.axsguard.com) --- Able NV: ond.nr 0457.938.087 ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TDM400P off-hook detection problem
On Thu, 2005-10-13 at 12:44 +0200, Sergio Serrano wrote: Your card must be a TDM with 4 FXS ports. FXO port is to connect and analog line, and FXS port is for connect analog phone. Are you sure that in 3rd and 4th ports you have immediate=no? if it may help, I could just stop *, # rmmod wcfxs # modprobe wcfxs # asterisk and now all ports are working fine ??? I Googled around and found someone with a similar problem 5 okt 2004. It happened after 2 weeks of operation ? I think it's still an issue in the driver... Alex -- NEW: aXs GUARD hands-on Trainings v.7.0 more info at http://www.axsguard.com/indextraining.htm aXs GUARD has completed security and anti-virus checks on this e-mail (http://www.axsguard.com) --- Able NV: ond.nr 0457.938.087 ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TDM400P off-hook detection problem
Check your Revision card, if it is Rev H in zaptel sources you have a zconfig.h with a Flag to Revision H. Try it. regards, -Mensaje original- De: Alex Ongena [mailto:[EMAIL PROTECTED] Enviado el: jueves, 13 de octubre de 2005 12:56 Para: Asterisk Users Mailing List - Non-Commercial Discussion Asunto: RE: [Asterisk-Users] TDM400P off-hook detection problem On Thu, 2005-10-13 at 12:44 +0200, Sergio Serrano wrote: Your card must be a TDM with 4 FXS ports. FXO port is to connect and analog line, and FXS port is for connect analog phone. Are you sure that in 3rd and 4th ports you have immediate=no? if it may help, I could just stop *, # rmmod wcfxs # modprobe wcfxs # asterisk and now all ports are working fine ??? I Googled around and found someone with a similar problem 5 okt 2004. It happened after 2 weeks of operation ? I think it's still an issue in the driver... Alex -- NEW: aXs GUARD hands-on Trainings v.7.0 more info at http://www.axsguard.com/indextraining.htm aXs GUARD has completed security and anti-virus checks on this e-mail (http://www.axsguard.com) --- Able NV: ond.nr 0457.938.087 ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.11.14/131 - Release Date: 12/10/2005 ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TDM400P off-hook detection problem
It's a REV I ... Txs On Thu, 2005-10-13 at 13:06 +0200, Sergio Serrano wrote: Check your Revision card, if it is Rev H in zaptel sources you have a zconfig.h with a Flag to Revision H. Try it. -- NEW: aXs GUARD hands-on Trainings v.7.0 more info at http://www.axsguard.com/indextraining.htm aXs GUARD has completed security and anti-virus checks on this e-mail (http://www.axsguard.com) --- Able NV: ond.nr 0457.938.087 ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
