my problem now was with asterisk connecting to the provider..not
asterisk to PBX..
asterisk to PBX is flawless
anyway, was using what u suggested sometime ago, later found out i can
collapse into one, then use it from then..
Michael L. Young wrote:
zaptel.conf
---
loadzone=uk
defaultzone=uk
span=1,1,1,ccs,hdb3,crc4,yellow
span=2,0,1,ccs,hdb3,crc4,yellow
bchan=1-15,32-46
dchan=16,47
bchan=17-31,48-62
---
where span 1 is to the provider and span 2 is to the PBX
Not sure if this matters but it sure makes it easier to read:
span=1,1,1,ccs,hdb3,crc4,yellow |
bchan=1-15,17-31| To provider
dchan=16|
span=2,0,1,ccs,hdb3,crc4,yellow |
bchan=32-46,48-62 | To PBX
dchan=47|
>From a programmer's point of view, I would be parsing the config file
looking for span and then the bchan and dchan for that span to follow. Then
when another span is detected check for the bchan, dchan, fxoks, etc. to
follow. I don't know if that is the case or not with zaptel drivers.
zapata.conf
-
context=from-pstn
switchtype=dms100
signalling=pri_cpe
callerid=asreceived
group=1
callgroup=1
pickupgroup=1
rxgain=0.0
txgain=0.0
channel=>1-15,17-31
I would assume that you have an entry declaring a different context and
group for your PBX, i.e.:
context=from-pbx
switchtype=dms100
signalling=pri_net
group=2
callgroup=2
pickupgroup=2
rxgain=0.0
txgain=0.0
channel=>32-46,48-62
Hope this points you in the right direction.
Michael
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
