Re: [Asterisk-Users] Call parking on Polycom IP501
From my original post: "using ParkAndAnnouce puts the parked call on hold, hangs up the parker and then immediately calls them back with an announcement of the stall number" So, I would say, yes :-) On Nov 24, 2005, at 11:09 AM, Alvaro Parres wrote: Hi... I have the polycom 301 with firmware 1.6.3 When i Press Park, i get a dialog to enter a extension. A dial 700 ther and the call get parked, and i recive a call announceme where the calls was parked. is this normal ??? On 11/24/05, Alvaro Parres <[EMAIL PROTECTED]> wrote: On 11/24/05, Adam Goryachev < [EMAIL PROTECTED]> wrote: I just tried it on my IP600, and when I press the park button, it waits for me to dial an extension number, then I press park again, and it just hangs up the call. Thanks, Adam On Tue, 2005-11-22 at 13:56 -0800, Anthony Rodgers wrote: > Hi there, > > Instead of asking a question, I thought I'd post an answer. I got the > Polycom IP501 'Park' softkey working with * by doing the following: > > features.conf: > > [general] > parkext => 1000 > parkpos => 1001-1009 > context => parkedcalls > parkingtime => 120 > transferdigittimeout => 3 > courtesytone = beep > > Nothing unusual there. Here's the neat bit: > > extensions.conf: > > [internal] ; or whatever the relevant context is for you - it's usually > wherever your Polycom lives > include => parkedcalls > exten => > callpark,1,ParkAndAnnounce(pbx-transfer:PARKED|120|SIP/ > ${DIALEDPEERNUMBER}|internal,${DIALEDPEERNUMBER},1) > > By using SIP DEBUG, I discovered that the Polycom attempts to re-invite > the call to an extension called callpark. I couldn't get Park() to work > (it announces the stall number to the parked caller, instead of the > parker, for some reason), but using ParkAndAnnouce puts the parked call > on hold, hangs up the parker and then immediately calls them back with > an announcement of the stall number. > > Hope this helps someone out.. > > Regards, ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Call parking on Polycom IP501
This is with Bootrom 2.6.2.0032, SIP 1.5.2.0054. On Nov 24, 2005, at 3:32 AM, Adam Goryachev wrote: What firmware version did you use for the polycom phone ?? I just tried it on my IP600, and when I press the park button, it waits for me to dial an extension number, then I press park again, and it just hangs up the call. Thanks, Adam On Tue, 2005-11-22 at 13:56 -0800, Anthony Rodgers wrote: > Hi there, > > Instead of asking a question, I thought I'd post an answer. I got the > Polycom IP501 'Park' softkey working with * by doing the following: > > features.conf: > > [general] > parkext => 1000 > parkpos => 1001-1009 > context => parkedcalls > parkingtime => 120 > transferdigittimeout => 3 > courtesytone = beep > > Nothing unusual there. Here's the neat bit: > > extensions.conf: > > [internal] ; or whatever the relevant context is for you - it's usually > wherever your Polycom lives > include => parkedcalls > exten => > callpark,1,ParkAndAnnounce(pbx-transfer:PARKED|120|SIP/ > ${DIALEDPEERNUMBER}|internal,${DIALEDPEERNUMBER},1) > > By using SIP DEBUG, I discovered that the Polycom attempts to re-invite > the call to an extension called callpark. I couldn't get Park() to work > (it announces the stall number to the parked caller, instead of the > parker, for some reason), but using ParkAndAnnouce puts the parked call > on hold, hangs up the parker and then immediately calls them back with > an announcement of the stall number. > > Hope this helps someone out.. > > Regards, ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Call parking on Polycom IP501
Hi Adam, Same - the parkee gets the stall number announcement instead of the parker. On Nov 24, 2005, at 2:49 AM, Adam Goryachev wrote: On Wed, 2005-11-23 at 12:53 -0800, Anthony Rodgers wrote: > Hi Dave, > > exten => callpark,1,Dial(SIP/1000) didn't work - invalid extension What about: exten => callpark,1,Dial(Local/[EMAIL PROTECTED]) Regards, Adam ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Call parking on Polycom IP501
Hi... I have the polycom 301 with firmware 1.6.3 When i Press Park, i get a dialog to enter a extension. A dial 700 ther and the call get parked, and i recive a call announceme where the calls was parked. is this normal ??? On 11/24/05, Alvaro Parres <[EMAIL PROTECTED]> wrote: i have the 1.6.3 firmware and also when i press park i need to dial another extension.. On 11/24/05, Adam Goryachev < [EMAIL PROTECTED]> wrote: What firmware version did you use for the polycom phone ??I just tried it on my IP600, and when I press the park button, it waitsfor me to dial an extension number, then I press park again, and it justhangs up the call. Thanks,AdamOn Tue, 2005-11-22 at 13:56 -0800, Anthony Rodgers wrote:> Hi there,>> Instead of asking a question, I thought I'd post an answer. I got the> Polycom IP501 'Park' softkey working with * by doing the following: >> features.conf:>> [general]> parkext => 1000> parkpos => 1001-1009> context => parkedcalls> parkingtime => 120> transferdigittimeout => 3 > courtesytone = beep>> Nothing unusual there. Here's the neat bit:>> extensions.conf:>> [internal] ; or whatever the relevant context is for you - it's usually> wherever your Polycom lives > include => parkedcalls> exten =>> callpark,1,ParkAndAnnounce(pbx-transfer:PARKED|120|SIP/> ${DIALEDPEERNUMBER}|internal,${DIALEDPEERNUMBER},1)>> By using SIP DEBUG, I discovered that the Polycom attempts to re-invite > the call to an extension called callpark. I couldn't get Park() to work> (it announces the stall number to the parked caller, instead of the> parker, for some reason), but using ParkAndAnnouce puts the parked call > on hold, hangs up the parker and then immediately calls them back with> an announcement of the stall number.>> Hope this helps someone out..>> Regards,___ --Bandwidth and Colocation sponsored by Easynews.com --Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Call parking on Polycom IP501
i have the 1.6.3 firmware and also when i press park i need to dial another extension.. On 11/24/05, Adam Goryachev <[EMAIL PROTECTED]> wrote: What firmware version did you use for the polycom phone ??I just tried it on my IP600, and when I press the park button, it waitsfor me to dial an extension number, then I press park again, and it justhangs up the call. Thanks,AdamOn Tue, 2005-11-22 at 13:56 -0800, Anthony Rodgers wrote:> Hi there,>> Instead of asking a question, I thought I'd post an answer. I got the> Polycom IP501 'Park' softkey working with * by doing the following: >> features.conf:>> [general]> parkext => 1000> parkpos => 1001-1009> context => parkedcalls> parkingtime => 120> transferdigittimeout => 3 > courtesytone = beep>> Nothing unusual there. Here's the neat bit:>> extensions.conf:>> [internal] ; or whatever the relevant context is for you - it's usually> wherever your Polycom lives > include => parkedcalls> exten =>> callpark,1,ParkAndAnnounce(pbx-transfer:PARKED|120|SIP/> ${DIALEDPEERNUMBER}|internal,${DIALEDPEERNUMBER},1)>> By using SIP DEBUG, I discovered that the Polycom attempts to re-invite > the call to an extension called callpark. I couldn't get Park() to work> (it announces the stall number to the parked caller, instead of the> parker, for some reason), but using ParkAndAnnouce puts the parked call > on hold, hangs up the parker and then immediately calls them back with> an announcement of the stall number.>> Hope this helps someone out..>> Regards,___ --Bandwidth and Colocation sponsored by Easynews.com --Asterisk-Users mailing listAsterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Call parking on Polycom IP501
What firmware version did you use for the polycom phone ?? I just tried it on my IP600, and when I press the park button, it waits for me to dial an extension number, then I press park again, and it just hangs up the call. Thanks, Adam On Tue, 2005-11-22 at 13:56 -0800, Anthony Rodgers wrote: > Hi there, > > Instead of asking a question, I thought I'd post an answer. I got the > Polycom IP501 'Park' softkey working with * by doing the following: > > features.conf: > > [general] > parkext => 1000 > parkpos => 1001-1009 > context => parkedcalls > parkingtime => 120 > transferdigittimeout => 3 > courtesytone = beep > > Nothing unusual there. Here's the neat bit: > > extensions.conf: > > [internal] ; or whatever the relevant context is for you - it's usually > wherever your Polycom lives > include => parkedcalls > exten => > callpark,1,ParkAndAnnounce(pbx-transfer:PARKED|120|SIP/ > ${DIALEDPEERNUMBER}|internal,${DIALEDPEERNUMBER},1) > > By using SIP DEBUG, I discovered that the Polycom attempts to re-invite > the call to an extension called callpark. I couldn't get Park() to work > (it announces the stall number to the parked caller, instead of the > parker, for some reason), but using ParkAndAnnouce puts the parked call > on hold, hangs up the parker and then immediately calls them back with > an announcement of the stall number. > > Hope this helps someone out.. > > Regards, ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Call parking on Polycom IP501
On Wed, 2005-11-23 at 12:53 -0800, Anthony Rodgers wrote: > Hi Dave, > > exten => callpark,1,Dial(SIP/1000) didn't work - invalid extension What about: exten => callpark,1,Dial(Local/[EMAIL PROTECTED]) Regards, Adam ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Call parking on Polycom IP501
Hi Dave, exten => callpark,1,Dial(SIP/1000) didn't work - invalid extension exten => callpark,1,Transfer(1000) didn't work - the parker hung up, and the stall number announcement was made to the parked caller. On Nov 22, 2005, at 10:34 PM, David Hindmarsh wrote: Hi Guys, What happened if you just sent the callpark extension to 1000 Regards, David > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Anthony Rodgers > Sent: Wednesday, 23 November 2005 08:57 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [Asterisk-Users] Call parking on Polycom IP501 > > Hi there, > > Instead of asking a question, I thought I'd post an answer. I > got the Polycom IP501 'Park' softkey working with * by doing > the following: > > features.conf: > > [general] > parkext => 1000 > parkpos => 1001-1009 > context => parkedcalls > parkingtime => 120 > transferdigittimeout => 3 > courtesytone = beep > > Nothing unusual there. Here's the neat bit: > > extensions.conf: > > [internal] ; or whatever the relevant context is for you - > it's usually wherever your Polycom lives include => > parkedcalls exten => > callpark,1,ParkAndAnnounce(pbx-transfer:PARKED|120|SIP/ > ${DIALEDPEERNUMBER}|internal,${DIALEDPEERNUMBER},1) > > By using SIP DEBUG, I discovered that the Polycom attempts to > re-invite the call to an extension called callpark. I > couldn't get Park() to work (it announces the stall number to > the parked caller, instead of the parker, for some reason), > but using ParkAndAnnouce puts the parked call on hold, hangs > up the parker and then immediately calls them back with an > announcement of the stall number. > > Hope this helps someone out.. > > Regards, > -- > Anthony Rodgers > Business Systems Analyst > District of North Vancouver > Web: http://www.dnv.org > RSS Feed: http://www.dnv.org/rss.asp > > ___ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.362 / Virus Database: 267.13.5/178 - Release > Date: 22/11/2005 > > -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.5/178 - Release Date: 22/11/2005 ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Call parking on Polycom IP501
Hi Guys, What happened if you just sent the callpark extension to 1000 Regards, David > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Anthony Rodgers > Sent: Wednesday, 23 November 2005 08:57 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [Asterisk-Users] Call parking on Polycom IP501 > > Hi there, > > Instead of asking a question, I thought I'd post an answer. I > got the Polycom IP501 'Park' softkey working with * by doing > the following: > > features.conf: > > [general] > parkext => 1000 > parkpos => 1001-1009 > context => parkedcalls > parkingtime => 120 > transferdigittimeout => 3 > courtesytone = beep > > Nothing unusual there. Here's the neat bit: > > extensions.conf: > > [internal] ; or whatever the relevant context is for you - > it's usually wherever your Polycom lives include => > parkedcalls exten => > callpark,1,ParkAndAnnounce(pbx-transfer:PARKED|120|SIP/ > ${DIALEDPEERNUMBER}|internal,${DIALEDPEERNUMBER},1) > > By using SIP DEBUG, I discovered that the Polycom attempts to > re-invite the call to an extension called callpark. I > couldn't get Park() to work (it announces the stall number to > the parked caller, instead of the parker, for some reason), > but using ParkAndAnnouce puts the parked call on hold, hangs > up the parker and then immediately calls them back with an > announcement of the stall number. > > Hope this helps someone out.. > > Regards, > -- > Anthony Rodgers > Business Systems Analyst > District of North Vancouver > Web: http://www.dnv.org > RSS Feed: http://www.dnv.org/rss.asp > > ___ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.362 / Virus Database: 267.13.5/178 - Release > Date: 22/11/2005 > > -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.5/178 - Release Date: 22/11/2005 ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users