Re: [Asterisk-Users] E100P - connected to Cisco

2004-01-12 Thread Matteo Brancaleoni
try:

span=2,1,0,ccs,hdb3,yellow

matteo

Il lun, 2004-01-12 alle 16:13, Daniel Bichara ha scritto:
 Hi,
 
 have any one sucessfully connected E100P to Cisco? I am getting
 singnalling problems (channels becomes up and down)...
 
 #
 Zaptel.Conf:
 
 span=2,0,0,ccs,hdb3,yellow
 bchan=32-46,48-62
 dchan=47
 
 #
 Zapata.conf:
 
 callwaiting=yes
 callwaitingcallerid=yes
 threewaycalling=no
 transfer=no
 cancallforward=no
 callreturn=no
 echocancel=yes
 echocancelwhenbridged=yes
 group = 2
 signalling = pri_net
 switchtype = national
 channel = 32-46
 channel = 48-62
 
 #
 My New Cisco Conf:
 
 ! Cisco   AS5300  - ios  c5300-is-mz.122-5.bin
  
 isdn switch-type primary-ni
 isdn voice-call-failure 0
  
 controller E1 3
  framing NO-CRC4
  pri-group timeslots 1-31
  
 interface Serial3:15
  no ip address
  isdn switch-type primary-ni
  isdn protocol-emulate network
  isdn guard-timer 2000
  isdn T203 1
  isdn T306 3000
  isdn T310 6
  isdn bchan-number-order ascending
  no cdp enable
 
 
 
 My INTENSE debug output:
 
  [
  [00
  [00 01
  [00 01 01
  [00 01 01 01
  [00 01 01 01 ]
  [00 01 01 01 ]
  Supervisory frame:
  SAPI: 00  C/R: 0 EA: 0
   TEI: 000EA: 1
  Zero: 0 S: 0 01: 1  [ RR (receive ready) ]
  N(R): 000 P/F: 1
  0 bytes of data
 -- Restarting T203 counter
  
  [
  [00
  [00 01
  [00 01 00
  [00 01 00 00
  [00 01 00 00 08
  [00 01 00 00 08 02
  [00 01 00 00 08 02 00
  [00 01 00 00 08 02 00 00
  [00 01 00 00 08 02 00 00 46
  [00 01 00 00 08 02 00 00 46 18
  [00 01 00 00 08 02 00 00 46 18 03
  [00 01 00 00 08 02 00 00 46 18 03 a9
  [00 01 00 00 08 02 00 00 46 18 03 a9 83
  [00 01 00 00 08 02 00 00 46 18 03 a9 83 9c
  [00 01 00 00 08 02 00 00 46 18 03 a9 83 9c 79
  [00 01 00 00 08 02 00 00 46 18 03 a9 83 9c 79 01
  [00 01 00 00 08 02 00 00 46 18 03 a9 83 9c 79 01 80
  [00 01 00 00 08 02 00 00 46 18 03 a9 83 9c 79 01 80 ]
  [00 01 00 00 08 02 00 00 46 18 03 a9 83 9c 79 01 80 ]
  Informational frame:
  SAPI: 00  C/R: 0 EA: 0
   TEI: 000EA: 1
  N(S): 000   0: 0
  N(R): 000   P: 0
  13 bytes of data
 -- Restarting T203 counter
 Stopping T_203 timer
 Starting T_200 timer
  Protocol Discriminator: Q.931 (8)  len=13
  Call Ref: len= 2 (reference 0/0x0) (Originator)
  Message type: RESTART (70)
  Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0,
 Exclusive Dchan: 0
 ChanSel: Reserved
Ext: 1  Coding: 0   Number Specified   Channel
 Type: 3
Ext: 1  Channel: 28 ]
  Restart Indentifier: [ Ext: 1  Spare: 0  Resetting Indicated Channel
 (0) ]
 -- T200 counter expired, What to do...
 -- Retransmitting 17 bytes
  
  [
  [00
  [00 01
  [00 01 00
  [00 01 00 01
  [00 01 00 01 08
  [00 01 00 01 08 02
  [00 01 00 01 08 02 00
  [00 01 00 01 08 02 00 00
  [00 01 00 01 08 02 00 00 46
  [00 01 00 01 08 02 00 00 46 18
  [00 01 00 01 08 02 00 00 46 18 03
  [00 01 00 01 08 02 00 00 46 18 03 a9
  [00 01 00 01 08 02 00 00 46 18 03 a9 83
  [00 01 00 01 08 02 00 00 46 18 03 a9 83 9c
  [00 01 00 01 08 02 00 00 46 18 03 a9 83 9c 79
  [00 01 00 01 08 02 00 00 46 18 03 a9 83 9c 79 01
  [00 01 00 01 08 02 00 00 46 18 03 a9 83 9c 79 01 80
  [00 01 00 01 08 02 00 00 46 18 03 a9 83 9c 79 01 80 ]
  [00 01 00 01 08 02 00 00 46 18 03 a9 83 9c 79 01 80 ]
  Informational frame:
  SAPI: 00  C/R: 0 EA: 0
   TEI: 000EA: 1
  N(S): 000   0: 0
  N(R): 000   P: 1
  13 bytes of data
 -- Rescheduling retransmission (1)
  
  [
  [00
  [00 01
  [00 01 01
  [00 01 01 03
  [00 01 01 03 ]
  [00 01 01 03 ]
  Supervisory frame:
  SAPI: 00  C/R: 0 EA: 0
   TEI: 000EA: 1
  Zero: 0 S: 0 01: 1  [ RR (receive ready) ]
  N(R): 001 P/F: 1
  0 bytes of data
 -- ACKing all packets from 0 to (but not including) 1
 -- ACKing packet 0, new txqueue is -1 (-1 means empty)
 -- Since there was nothing left, stopping T200 counter
 -- Nothing left, starting T203 counter
 -- Got RR response to our frame
 -- Restarting T203 counter
  
  [
  [02
  [02 01
  [02 01 00
  [02 01 00 02
  [02 01 00 02 08
  [02 01 00 02 08 02
  [02 01 00 02 08 02 80
  [02 01 00 02 08 02 80 00
  [02 01 00 02 08 02 80 00 4e
  [02 01 00 02 08 02 80 00 4e 18
  [02 01 00 02 08 02 80 00 4e 18 03
  [02 01 00 02 08 02 80 00 4e 18 03 a9
  [02 01 00 02 08 02 80 00 4e 18 03 a9 83
  [02 01 00 02 08 02 80 00 4e 18 03 a9 83 9c
  [02 01 00 02 08 02 80 00 4e 18 03 a9 83 9c 79
  [02 01 00 02 08 02 80 00 4e 18 03 a9 83 9c 79 01
  [02 01 00 02 08 02 80 00 4e 18 03 a9 83 9c 79 01 80
  [02 01 00 02 08 02 80 00 4e 18 03 a9 83 9c 79 01 80 ]
  [02 01 00 02 08 02 80 00 4e 18 03 a9 83 9c 79 01 80 ]
  Informational frame:
  SAPI: 00  C/R: 1 EA: 0
   TEI: 000EA: 1
  N(S): 000   0: 0
  N(R): 001   P: 0
  13 bytes of data
 -- ACKing all packets from 0 to (but not including) 1
 -- Since there was nothing left, stopping T200 counter
 -- Stopping T203 counter since we got an ACK
 -- Nothing left, starting T203 counter
  Protocol Discriminator: Q.931 (8)  len=13
  Call 

Re: [Asterisk-Users] E100P connected to Cisco

2003-12-22 Thread Martin Pycko
You need to have HDLC generic support compiled into your kernel ... I
think it's not good to have it compiled in modules ... just embedded in
kernel.

Martin

On Sat, 20 Dec 2003, Daniel Bichara wrote:

 Hi All,

 I wish to connect * to a Cisco using a E100P board.

 When I load the driver I got this error message:

 -bash-2.05b# modprobe wct1xxp
 ZT_CHANCONFIG failed on channel 1: Function not implemented (38)
 /lib/modules/2.4.21-SAX/misc/wct1xxp.o: post-install wct1xxp failed
 /lib/modules/2.4.21-SAX/misc/wct1xxp.o: insmod wct1xxp failed


 Follows Cisco configuration:

 isdn switch-type primary-qsig
 isdn voice-call-failure 0


 controller E1 2
  framing NO-CRC4
  clock source line primary
  pri-group timeslots 1-31

 interface Serial2:15
  no ip address
  isdn switch-type primary-qsig
  isdn overlap-receiving T302 2000
  isdn incoming-voice modem
  isdn T310 4
  isdn send-alerting
  no cdp enable

 voice-port 2:D
  cptone BR


 I configured my /etc/zapata.conf:

 span=1,0,0,ccs,hdb3
 nethdlc=1-15

 Any clue?

 Thanks in advance,

 Daniel

 ___
 Asterisk-Users mailing list
 [EMAIL PROTECTED]
 http://lists.digium.com/mailman/listinfo/asterisk-users


___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users