Re: [Asterisk-Users] Help on x101p disconnect when called party answers
On Mon, November 21, 2005 2:31 pm, MZ said: hi, using a multimeter i have verified that the analog line we have actually supports polarity reversal when the remote party answers and another reversal on hangup. with this i assume that i can use the kewlstart signalling so that the x101p can automatically disconnect. my problem is -- as soon as the called party answers, the call is disconnected. This is a problem here too.. Is there any way to get the x101p/TDM400p FXO ports to not disconnect when there is a polarity reversal or momentary interruption of CO battery voltage on the PSTN line ? -kim -- [EMAIL PROTECTED] ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Help on x101p disconnect when called party answers
hi, when i tried to observe the polarity reversal on my x101p (i only have this), it seems that my x101p does not care about polarity reversals but only battery interruption. my guess is that x101p is not capable of detecting polarity and i was thinking that a tdm card will solve my problem. if you have a tdm400p maybe you can try to play with the answeronpolarity/hanguponpolarity in zapata.conf. please tell me if my guess is correct that a tdm400p will solve this problem or else i'll be wasting money in buying a tdm400p. thanks On 11/24/05, Kim Culhan [EMAIL PROTECTED] wrote: On Mon, November 21, 2005 2:31 pm, MZ said: hi, using a multimeter i have verified that the analog line we have actually supports polarity reversal when the remote party answers and another reversal on hangup. with this i assume that i can use the kewlstart signalling so that the x101p can automatically disconnect. my problem is -- as soon as the called party answers, the call is disconnected.This is a problem here too.. Is there any way to get the x101p/TDM400pFXO ports to not disconnect when there is a polarity reversal or momentaryinterruption of CO battery voltage on the PSTN line ? -kim--[EMAIL PROTECTED]___--Bandwidth and Colocation sponsored by Easynews.com --Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Help with x101P
- Original Message - From: Burak Balasaygun [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, December 27, 2003 10:46 PM Subject: RE: [Asterisk-Users] Help with x101P snip I'm not sure what you mean by what type of switch you are connected to? The x101p is connected to the CO switch for my LEC. Occasionally I do NPA-NXX lookups for my local exchanges to see what other carriers have prefixes in my area. I used to use telcodata.us, but they seem to have gone offline. Usually, after you find the carrier's name, you can see info on the location and type of switch being used. I can't say with any assurity that the info is accurate, but it is there if you dig. Andrew Thompson http://aktzero.com/ ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Help with x101P
Occasionally I do NPA-NXX lookups for my local exchanges to see what other carriers have prefixes in my area. I used to use telcodata.us, but they seem to have gone offline. Usually, after you find the carrier's name, you can see info on the location and type of switch being used. I can't say with any assurity that the info is accurate, but it is there if you dig http://www.dslreports.com/coinfo Has the same kinda info. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Help with x101P
Andrew Thompson wrote: - Original Message - From: Burak Balasaygun [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, December 27, 2003 10:46 PM Subject: RE: [Asterisk-Users] Help with x101P snip I'm not sure what you mean by what type of switch you are connected to? The x101p is connected to the CO switch for my LEC. Occasionally I do NPA-NXX lookups for my local exchanges to see what other carriers have prefixes in my area. I used to use telcodata.us, but they seem to have gone offline. Usually, after you find the carrier's name, you can see info on the location and type of switch being used. I can't say with any assurity that the info is accurate, but it is there if you dig. http://www.telcoexchange.com/resources/carriers/index.shtml will tell you the switch and other stuff when you put in a phone number. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Help with x101P
busydetect and callprogress should be turned off in my experience, enabling any of those parameters causes random drops. comment the lines out of your config file, and try again. Mark At 02:32 PM 12/27/2003 -0400, Burak Balasaygun wrote: Hello, I recently purchased an x101p and am having problems with it. I get random hangups after which the channel provisioned for this card is unsuable (until the driver is uninstalled and then reinstalled). Looiking in the log file (and running zttool) I can see a red alarm on the card even though their is connectivity to walljack. I have read the archives and have experimented with tweaking busydetect and callprogress params with no luck. Any help is greatly appreciated. thanks burak ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Help with x101P
How do you have your zaptel.conf set up (please post it here). Also, what type of switch are you connected to? Regards, Scott M. Stingel Emerging Voice Technology Inc. Email: scott a t evtmedia.com URL:www.evtmedia.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Burak Balasaygun Sent: Saturday, December 27, 2003 6:32 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Help with x101P Hello, I recently purchased an x101p and am having problems with it. I get random hangups after which the channel provisioned for this card is unsuable (until the driver is uninstalled and then reinstalled). Looiking in the log file (and running zttool) I can see a red alarm on the card even though their is connectivity to walljack. I have read the archives and have experimented with tweaking busydetect and callprogress params with no luck. Any help is greatly appreciated. thanks burak ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Help with x101P
Scott, Posted below are both zaptel.conf and zapata.conf as they were configured when the problem occured.I have since changed the busydetect parameter to have a value of no in light of Mark's advice. The problem has not recurred (but it has been a very short while since I made the change) since making the change. I'm not sure what you mean by what type of switch you are connected to? The x101p is connected to the CO switch for my LEC. many thanks burak zaptel.conf fxsks=1 fxoks=2 loadzone=us defaultzone=us zapata.conf -- ; ; Zapata telephony interface ; ; Configuration file [channels] busydetect=no busycount=5 relaxdtmf=yes callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes usecallerid=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 pickupgroup=1-4 immediate=no context=bell signalling=fxs_ks callerid=asreceived channel=1 context=home group=2 signalling=fxo_ks mailbox=0273 callerid=Phone 1 0273 channel=2 On Sat, 27 Dec 2003 19:57:36 -, Scott Stingel wrote How do you have your zaptel.conf set up (please post it here). Also, what type of switch are you connected to? Regards, Scott M. Stingel Emerging Voice Technology Inc. Email: scott a t evtmedia.com URL:www.evtmedia.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Burak Balasaygun Sent: Saturday, December 27, 2003 6:32 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Help with x101P Hello, I recently purchased an x101p and am having problems with it. I get random hangups after which the channel provisioned for this card is unsuable (until the driver is uninstalled and then reinstalled). Looiking in the log file (and running zttool) I can see a red alarm on the card even though their is connectivity to walljack. I have read the archives and have experimented with tweaking busydetect and callprogress params with no luck. Any help is greatly appreciated. thanks burak ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users rgds burak ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
