Re: [Asterisk-Users] Is there hardware to remote control
I found this interesting box at qkits.com QK108 It has 8 relay outputs and 4 inputs. It's controlled via RS-232c(serial port) instead of a printer port. I have an 8 port serial card in a linux server to control a bunch of stuff. I have apache on that server and can control the relays via a cgi script. I found it very easy to program a serial port via perl and with an 8 port serial card(from Perle). You can have a bunch of stuff hanging off it, like a 4 probe temp kit (QK 145) and a ups and an RS-232 voltmeter to monitor the commerical power coming in and I suspose it would be easy to take this even further to write AGI scripts and dial an extension and let * announce the temperature or status of those inputs and to control the outputs of the QK108. I also use it with their K2639 to monitor the sump pits, monitoring for sump pump failure.(therefore high water levels). Lyle - Original Message - From: David Cook [EMAIL PROTECTED] To: asterisk-users@lists.digium.com Sent: Monday, December 20, 2004 9:10 AM Subject: Re: [Asterisk-Users] Is there hardware to remote control From: Ronald Wiplinger [EMAIL PROTECTED] Subject: [Asterisk-Users] Is there hardware to remote control available? To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; charset=us-ascii; format=flowed I am looking for a hardware, which can turn on / off (control) via the dial plan. Is something available? You can run an AGI from within your diaplan which can do anything available to the host machine. As for turning things on/off, you have several options. a) serial port control; b) parallel port control; c) attached microcontroller; d) X-10 signals. Please exuse this for going OT into home automation stuff, but in an effort to answer the original question, here goes ... a) I have often used a little program that flips the DTR RTS signals on a serial port (independently so you can control two things). You need to turn on/off a logic state or an LED that is fine. If you need to switch a larger electical load, put a solid state relay on that pin. I have my laser printer and my pool pump controlled that way. b) Parallel port works basically the same way with the 8 output pins on the connector that can be controlled. Haven't actually done this though. Lastly, connect a microcontroller like a Parallax Basic Stamp to your server where you can write code that runs on the microcontroller and does numerous things pseudo autonomously from c) Microcontroller like the Parallax Basic Stamp series. This allows you to run a program on this little computer device (100.00) that was made for I/O control. It can do all kinds of things pseudo autonomously and feed back the info to the PC. d) X10 have several interfaces for PC's. I like a little one called the Firecracker interface. It uses an RS232C line and can control devices by sending radio signals from it to a reciever module that is plugged into a wall socket. It then embeds the cammands you sent it into the electrical circuits in your home. Another module then plugs into the wall somewhere and you plug devices into it. The little wall modules recieves the signal coming along the electrical lines and turns the device on/off/dim, etc. The reason I like the Firecracker is that it is a dumb device. All program code must exist on the PC therefore I have more control. They have other devices which you download program code to then they are autonomous which I don't think is what you are looking for. I use a) d) extensively here. If anyone wants the code or more info, just ask. David Cook ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Is there hardware to remote control
Lyle Giese wrote: I found this interesting box at qkits.com QK108 It has 8 relay outputs and 4 inputs. It's controlled via RS-232c(serial port) instead of a printer port. I have an 8 port serial card in a linux server to control a bunch of stuff. I have apache on that server and can control the relays via a cgi script. I found it very easy to program a serial port via perl and with an 8 port serial card(from Perle). You can have a bunch of stuff hanging off it, like a 4 probe temp kit (QK 145) and a ups and an RS-232 voltmeter to monitor the commerical power coming in and I suspose it would be easy to take this even further to write AGI scripts and dial an extension and let * announce the temperature or status of those inputs and to control the outputs of the QK108. I also use it with their K2639 to monitor the sump pits, monitoring for sump pump failure.(therefore high water levels). Cool, I've got to check that out. For the OP, check my 1st web page below for various odds and ends for the hardware and software that can be run on a *nix box. It's not directly * related but if you can run scripts you can take advantage of my collection of links. -- Linux Home Automation Neil Cherry [EMAIL PROTECTED] http://home.comcast.net/~ncherry/ (Text only) http://hcs.sourceforge.net/ (HCS II) http://linuxha.blogspot.com/My HA Blog ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Is there hardware to remote control
From: Ronald Wiplinger [EMAIL PROTECTED] Subject: [Asterisk-Users] Is there hardware to remote control available? To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; charset=us-ascii; format=flowed I am looking for a hardware, which can turn on / off (control) via the dial plan. Is something available? You can run an AGI from within your diaplan which can do anything available to the host machine. As for turning things on/off, you have several options. a) serial port control; b) parallel port control; c) attached microcontroller; d) X-10 signals. Please exuse this for going OT into home automation stuff, but in an effort to answer the original question, here goes ... a) I have often used a little program that flips the DTR RTS signals on a serial port (independently so you can control two things). You need to turn on/off a logic state or an LED that is fine. If you need to switch a larger electical load, put a solid state relay on that pin. I have my laser printer and my pool pump controlled that way. b) Parallel port works basically the same way with the 8 output pins on the connector that can be controlled. Haven't actually done this though. Lastly, connect a microcontroller like a Parallax Basic Stamp to your server where you can write code that runs on the microcontroller and does numerous things pseudo autonomously from c) Microcontroller like the Parallax Basic Stamp series. This allows you to run a program on this little computer device (100.00) that was made for I/O control. It can do all kinds of things pseudo autonomously and feed back the info to the PC. d) X10 have several interfaces for PC's. I like a little one called the Firecracker interface. It uses an RS232C line and can control devices by sending radio signals from it to a reciever module that is plugged into a wall socket. It then embeds the cammands you sent it into the electrical circuits in your home. Another module then plugs into the wall somewhere and you plug devices into it. The little wall modules recieves the signal coming along the electrical lines and turns the device on/off/dim, etc. The reason I like the Firecracker is that it is a dumb device. All program code must exist on the PC therefore I have more control. They have other devices which you download program code to then they are autonomous which I don't think is what you are looking for. I use a) d) extensively here. If anyone wants the code or more info, just ask. David Cook ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Is there hardware to remote control
Hi David, I think it would be really cool if you could add this to the wikki under asterisk + home automation . There is more than enough users interested in reading what you've down. Although I wont be looking into this for another few months I like the idea of this and would be looking to support wherever I can. Cheers, Dean -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Cook Sent: Monday, December 20, 2004 10:10 AM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Is there hardware to remote control From: Ronald Wiplinger [EMAIL PROTECTED] Subject: [Asterisk-Users] Is there hardware to remote control available? To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; charset=us-ascii; format=flowed I am looking for a hardware, which can turn on / off (control) via the dial plan. Is something available? You can run an AGI from within your diaplan which can do anything available to the host machine. As for turning things on/off, you have several options. a) serial port control; b) parallel port control; c) attached microcontroller; d) X-10 signals. Please exuse this for going OT into home automation stuff, but in an effort to answer the original question, here goes ... a) I have often used a little program that flips the DTR RTS signals on a serial port (independently so you can control two things). You need to turn on/off a logic state or an LED that is fine. If you need to switch a larger electical load, put a solid state relay on that pin. I have my laser printer and my pool pump controlled that way. b) Parallel port works basically the same way with the 8 output pins on the connector that can be controlled. Haven't actually done this though. Lastly, connect a microcontroller like a Parallax Basic Stamp to your server where you can write code that runs on the microcontroller and does numerous things pseudo autonomously from c) Microcontroller like the Parallax Basic Stamp series. This allows you to run a program on this little computer device (100.00) that was made for I/O control. It can do all kinds of things pseudo autonomously and feed back the info to the PC. d) X10 have several interfaces for PC's. I like a little one called the Firecracker interface. It uses an RS232C line and can control devices by sending radio signals from it to a reciever module that is plugged into a wall socket. It then embeds the cammands you sent it into the electrical circuits in your home. Another module then plugs into the wall somewhere and you plug devices into it. The little wall modules recieves the signal coming along the electrical lines and turns the device on/off/dim, etc. The reason I like the Firecracker is that it is a dumb device. All program code must exist on the PC therefore I have more control. They have other devices which you download program code to then they are autonomous which I don't think is what you are looking for. I use a) d) extensively here. If anyone wants the code or more info, just ask. David Cook ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
