Re: [Asterisk-Users] Polycom Auto-Answer problems

2005-07-14 Thread Ryan Courtnage 


On 14-Jul-05, at 2:20 PM, Chad Osmond wrote:


CVS Head from 07/07/2005

I'm trying to make an IP-501 auto answer a call.

exten => 301,1,SetVar(_ALERT_INFO="Ring_Ans")
exten => 301,2,SetVar(ALERT_INFO="Ring_Ans")   # Tried both  
combinations


Try getting rid of the quotes:

exten => 301,1,SetVar(_ALERT_INFO=Ring_Ans)
exten => 301,2,SetVar(ALERT_INFO=Ring_Ans)

___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [Asterisk-Users] Polycom Auto-Answer problems

2005-07-14 Thread Adam Dobrin 

Chad Osmond wrote:


CVS Head from 07/07/2005

I'm trying to make an IP-501 auto answer a call.

exten => 301,1,SetVar(_ALERT_INFO="Ring_Ans")
exten => 301,2,SetVar(ALERT_INFO="Ring_Ans")   # Tried both combinations
exten => 301,3,Dial(SIP/5001,15)
exten => 301,4,Hangup

Sip.cfg for Polycom phone


Ipmid.cfg


 



you um, rebooted the phone, right? (and are sure the new configuration 
was loaded?)



Asterisk Log:
  -- Executing SetVar("SIP/5002-6e20", "_ALERT_INFO="Ring_Ans"") in new
stack
   -- Executing SetVar("SIP/5002-6e20", "ALERT_INFO="Ring_Ans"") in new
stack
   -- Executing Dial("SIP/5002-6e20", "SIP/5001|15") in new stack
   -- Called 5001
   -- SIP/5001-f735 is ringing
   -- Nobody picked up in 15000 ms

As you can see it just rings, and then hangs up. 


Any one have an idea?


Chad
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

 



___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [Asterisk-Users] Polycom Auto-Answer problems

2005-07-14 Thread dbruce 
Although the suggestions from the previous responders are goo suggestions,
you have overlooked an obvious mis-configuration...

In your ipmid.cfg, you have:

when you should have:


What you have done is assign the RING_ANSWER ringtype to the previous entry.
You also need to make sure that each entry in alertInfo section is
sequential.

Make the correction in your ipmid.cfg, reboot the phones and all should work
as expected.

Regards,
Derek Bruce



- Original Message -
From: "Adam Dobrin" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"

Sent: Thursday, July 14, 2005 4:07 PM
Subject: Re: [Asterisk-Users] Polycom Auto-Answer problems


> Chad Osmond wrote:
>
> >CVS Head from 07/07/2005
> >
> >I'm trying to make an IP-501 auto answer a call.
> >
> >exten => 301,1,SetVar(_ALERT_INFO="Ring_Ans")
> >exten => 301,2,SetVar(ALERT_INFO="Ring_Ans")   # Tried both combinations
> >exten => 301,3,Dial(SIP/5001,15)
> >exten => 301,4,Hangup
> >
> >Sip.cfg for Polycom phone
> >  >voIpProt.SIP.alertInfo.1.class="4"/>
> >
> >Ipmid.cfg
> > >se.rt.4.timeout="1000" se.rt.4.ringer="2" se.rt.4.callWait="6"
> >se.rt.4.mod="1"/>
> >
> >
> >
>
> you um, rebooted the phone, right? (and are sure the new configuration
> was loaded?)
>
> >Asterisk Log:
> >   -- Executing SetVar("SIP/5002-6e20", "_ALERT_INFO="Ring_Ans"") in new
> >stack
> >-- Executing SetVar("SIP/5002-6e20", "ALERT_INFO="Ring_Ans"") in new
> >stack
> >-- Executing Dial("SIP/5002-6e20", "SIP/5001|15") in new stack
> >-- Called 5001
> >-- SIP/5001-f735 is ringing
> >-- Nobody picked up in 15000 ms
> >
> >As you can see it just rings, and then hangs up.
> >
> >Any one have an idea?
> >
> >
> >Chad
> >___
> >Asterisk-Users mailing list
> >Asterisk-Users@lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> >
>
> ___
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>http://lists.digium.com/mailman/listinfo/asterisk-users

___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [Asterisk-Users] Polycom Auto-Answer problems

2005-07-14 Thread C F 
The IP-501 AFAIK comes shipped with SIP1.5.2 which does NOT use
ipmid.cfg. You have to get new *.cfg files for the ip-501 or the older
phones that run 1.5.2.

On 7/14/05, Chad Osmond <[EMAIL PROTECTED]> wrote:
> CVS Head from 07/07/2005
> 
> I'm trying to make an IP-501 auto answer a call.
> 
> exten => 301,1,SetVar(_ALERT_INFO="Ring_Ans")
> exten => 301,2,SetVar(ALERT_INFO="Ring_Ans")   # Tried both combinations
> exten => 301,3,Dial(SIP/5001,15)
> exten => 301,4,Hangup
> 
> Sip.cfg for Polycom phone
>   voIpProt.SIP.alertInfo.1.class="4"/>
> 
> Ipmid.cfg
>  se.rt.4.timeout="1000" se.rt.4.ringer="2" se.rt.4.callWait="6"
> se.rt.4.mod="1"/>
> 
> 
> Asterisk Log:
>   -- Executing SetVar("SIP/5002-6e20", "_ALERT_INFO="Ring_Ans"") in new
> stack
>-- Executing SetVar("SIP/5002-6e20", "ALERT_INFO="Ring_Ans"") in new
> stack
>-- Executing Dial("SIP/5002-6e20", "SIP/5001|15") in new stack
>-- Called 5001
>-- SIP/5001-f735 is ringing
>-- Nobody picked up in 15000 ms
> 
> As you can see it just rings, and then hangs up.
> 
> Any one have an idea?
> 
> 
> Chad
> ___
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [Asterisk-Users] Polycom Auto-Answer problems

2005-07-15 Thread dbruce 
Although the ipmid.cfg has been deprecated with SIP v1.5.2 (all the
parameters have been moved to sip.cfg), the firmware will still parse and
use the ipmid.cfg file until you specifically update your existing
configuration files.

If you have already updated the configuration files, then both of the
parameters will be in the sip.cfg file.

Regards,
Derek

- Original Message -
From: "C F" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"

Sent: Thursday, July 14, 2005 9:04 PM
Subject: Re: [Asterisk-Users] Polycom Auto-Answer problems


The IP-501 AFAIK comes shipped with SIP1.5.2 which does NOT use
ipmid.cfg. You have to get new *.cfg files for the ip-501 or the older
phones that run 1.5.2.

On 7/14/05, Chad Osmond <[EMAIL PROTECTED]> wrote:
> CVS Head from 07/07/2005
>
> I'm trying to make an IP-501 auto answer a call.
>
> exten => 301,1,SetVar(_ALERT_INFO="Ring_Ans")
> exten => 301,2,SetVar(ALERT_INFO="Ring_Ans")   # Tried both combinations
> exten => 301,3,Dial(SIP/5001,15)
> exten => 301,4,Hangup
>
> Sip.cfg for Polycom phone
>   voIpProt.SIP.alertInfo.1.class="4"/>
>
> Ipmid.cfg
>  se.rt.4.timeout="1000" se.rt.4.ringer="2" se.rt.4.callWait="6"
> se.rt.4.mod="1"/>
>
>
> Asterisk Log:
>   -- Executing SetVar("SIP/5002-6e20", "_ALERT_INFO="Ring_Ans"") in new
> stack
>-- Executing SetVar("SIP/5002-6e20", "ALERT_INFO="Ring_Ans"") in new
> stack
>-- Executing Dial("SIP/5002-6e20", "SIP/5001|15") in new stack
>-- Called 5001
>-- SIP/5001-f735 is ringing
>-- Nobody picked up in 15000 ms
>
> As you can see it just rings, and then hangs up.
>
> Any one have an idea?
>
>
> Chad
> ___
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

RE: [Asterisk-Users] Polycom Auto-Answer problems

2005-07-15 Thread Chad Osmond 
Ipmid still is being processed, sip.cfg contained the same information.
I've removed it just to clean things up.

Setting the class to the correct value solved the problem, I can't
believe that I missed it.

Thanks, 

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of dbruce
Sent: July 15, 2005 6:39 AM
To: C F; Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Polycom Auto-Answer problems

Although the ipmid.cfg has been deprecated with SIP v1.5.2 (all the
parameters have been moved to sip.cfg), the firmware will still parse
and use the ipmid.cfg file until you specifically update your existing
configuration files.

If you have already updated the configuration files, then both of the
parameters will be in the sip.cfg file.

Regards,
Derek

- Original Message -
From: "C F" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"

Sent: Thursday, July 14, 2005 9:04 PM
Subject: Re: [Asterisk-Users] Polycom Auto-Answer problems


The IP-501 AFAIK comes shipped with SIP1.5.2 which does NOT use
ipmid.cfg. You have to get new *.cfg files for the ip-501 or the older
phones that run 1.5.2.

On 7/14/05, Chad Osmond <[EMAIL PROTECTED]> wrote:
> CVS Head from 07/07/2005
>
> I'm trying to make an IP-501 auto answer a call.
>
> exten => 301,1,SetVar(_ALERT_INFO="Ring_Ans")
> exten => 301,2,SetVar(ALERT_INFO="Ring_Ans")   # Tried both
combinations
> exten => 301,3,Dial(SIP/5001,15)
> exten => 301,4,Hangup
>
> Sip.cfg for Polycom phone
>   voIpProt.SIP.alertInfo.1.class="4"/>
>
> Ipmid.cfg
>  se.rt.4.timeout="1000" se.rt.4.ringer="2" se.rt.4.callWait="6"
> se.rt.4.mod="1"/>
>
>
> Asterisk Log:
>   -- Executing SetVar("SIP/5002-6e20", "_ALERT_INFO="Ring_Ans"") in 
> new stack
>-- Executing SetVar("SIP/5002-6e20", "ALERT_INFO="Ring_Ans"") in 
> new stack
>-- Executing Dial("SIP/5002-6e20", "SIP/5001|15") in new stack
>-- Called 5001
>-- SIP/5001-f735 is ringing
>-- Nobody picked up in 15000 ms
>
> As you can see it just rings, and then hangs up.
>
> Any one have an idea?
>
>
> Chad
> ___
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [Asterisk-Users] Polycom Auto-Answer problems

2005-07-15 Thread Ariel Batista 

C F wrote:

The IP-501 AFAIK comes shipped with SIP1.5.2 which does NOT use
ipmid.cfg. You have to get new *.cfg files for the ip-501 or the older
phones that run 1.5.2.


Sorry to tell you but that is not a correct.  The IP-501 I have about 15 of 
them new and they came with 1.4.2 also they do use the ipmid.cfg. But it can 
use the newer version which is an all in one. You tell the phone which files 
to use via it's configuration file mac.cfg It sets up which files to load.




On 7/14/05, Chad Osmond <[EMAIL PROTECTED]> wrote:

CVS Head from 07/07/2005

I'm trying to make an IP-501 auto answer a call.

exten => 301,1,SetVar(_ALERT_INFO="Ring_Ans")
exten => 301,2,SetVar(ALERT_INFO="Ring_Ans")   # Tried both
combinations exten => 301,3,Dial(SIP/5001,15)
exten => 301,4,Hangup

Sip.cfg for Polycom phone
 

Ipmid.cfg



Asterisk Log:
  -- Executing SetVar("SIP/5002-6e20", "_ALERT_INFO="Ring_Ans"") in
new stack
   -- Executing SetVar("SIP/5002-6e20", "ALERT_INFO="Ring_Ans"") in
new stack
   -- Executing Dial("SIP/5002-6e20", "SIP/5001|15") in new stack
   -- Called 5001
   -- SIP/5001-f735 is ringing
   -- Nobody picked up in 15000 ms

As you can see it just rings, and then hangs up.

Any one have an idea?


Chad
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users


___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users 

___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users