Re: [Asterisk-Users] R2 in Bolivia
These are log of incoming calls Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 MFC/R2 call control(1) Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 MFC/R2 make call Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 Making a new call with CRN 32769 Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 Tx bits 0x1 [1/ 1/ 0/ 0] -- Called g3/70513933 Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:2848 handle_uc_event: UC event Dialing - 0x9841460 Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 Rx bits 0xD [1/ 40/201/ 0] Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 Tx tone 7 on [2/ 40/202/ 0] Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 Rx tone 5 on [2/ 40/202/201] Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 Tx tone 7 off [2/ 40/202/201] Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 Rx tone 5 off [2/ 40/202/201] Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 Tx tone E on [2/ 40/202/201] Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 Rx tone 5 on [2/ 40/202/207] Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 Tx tone E off [2/ 40/202/207] Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Rx tone 5 off [2/ 40/202/207] Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Tx tone E on [2/ 40/202/207] Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Rx tone 4 on [2/ 40/202/207] Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Tx tone E off [2/ 40/202/207] Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Rx tone 4 off [2/ 40/202/207] Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Far end disconnected - state 0x40 Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:2848 handle_uc_event: UC event Far end disconnected - 0x9841460 Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:3181 handle_uc_event: CRN 32769 - far disconnect cause 42 -- Channel 0 got hangup -- UniCall/1-1 is circuit-busy Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 MFC/R2 call control(6) Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 MFC/R2 drop call(cause=16) Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Clearing fwd Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Tx bits 0x9 [2/ 800/209/207] -- Hungup 'UniCall/1-1' == Everyone is busy/congested at this time Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Rx bits 0x9 [1/ 800/211/ 0] Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Call disconnected - state 0x800 Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:2848 handle_uc_event: UC event Drop call - 0x9841460 Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 MFC/R2 call control(7) Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 MFC/R2 release call Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Destroying call with CRN 32769 Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:2848 handle_uc_event: UC event Release call - 0x9841460 -- UC channel 1 released -- H.323 call 'ip$200.87.125.195:30008/25331' cleared, reason 7 (Remote user stopped calling) On Wed, 2005-01-26 at 07:53 +0800, Steve Underwood wrote: Hi Jorge, You might be the first person to try the Bolivian variant. I need more information to make any sense of the problem. In /etc/asterisk/unicall.conf add the line: loglevel = 1023 and try again. You should get a much more detailed log of what happens. Send that to me. Regards, Steve [EMAIL PROTECTED] wrote: Hi I made some tests with new MFC/R2 an unicall support for asterisk and now have dialing out problem using UniCall / R2. This is the error report in cli UC channel 30 protocol
Re: [Asterisk-Users] R2 in Bolivia
What version are you using for chan_unicall? On 25/01/2005, at 1:57 PM, [EMAIL PROTECTED] wrote: Hi I made some tests with new MFC/R2 an unicall support for asterisk and now have dialing out problem using UniCall / R2. This is the error report in cli UC channel 30 protocol error. Cause 32772 I hope this helps. Thanks in advance, Jorge PD: de conf files zaptel.conf span=1,1,1,cas,hdb3 cas=1-15:1010 cas=17-31:1010protocolclass=mfcr2 unicall.conf protocolvariant=bo,20,4 protocolend=cpe group = 3 channel = 1-15 ;skip time slot 16 channel=17-31 ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Saludos, Miguel Cavazos ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] R2 in Bolivia
Hi Jorge, You might be the first person to try the Bolivian variant. I need more information to make any sense of the problem. In /etc/asterisk/unicall.conf add the line: loglevel = 1023 and try again. You should get a much more detailed log of what happens. Send that to me. Regards, Steve [EMAIL PROTECTED] wrote: Hi I made some tests with new MFC/R2 an unicall support for asterisk and now have dialing out problem using UniCall / R2. This is the error report in cli UC channel 30 protocol error. Cause 32772 I hope this helps. Thanks in advance, Jorge PD: de conf files zaptel.conf span=1,1,1,cas,hdb3 cas=1-15:1010 cas=17-31:1010protocolclass=mfcr2 unicall.conf protocolvariant=bo,20,4 protocolend=cpe group = 3 channel = 1-15 ;skip time slot 16 channel=17-31 ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users