RE: [Asterisk-Users] Sipura 2000 not ringing.
I had (and still have) similar problem. Once SPA 2000 registers with * it all works well for few minutes. After that all incoming calls are not answered by SPA 2000. Is that what you mean? If so, I have temporaraly got SPA 2000 to re-register every 3 minutes. This seems to work at the moment. Are you sure you configured the SPA to send a keep alive message every 15-30 seconds? Sounds to me like the NAT binding is simply closing up and getting reopened with the frequent registrations. Yes, you are prabably 100% right and I did tried all combinations possible in SPA settigns to achieve NAT port opened but with no success. It should work behind NAT out of box. Even Grandstream device do! ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Sipura 2000 not ringing.
RTP stream not passed through the * server in case of SIP(Sipura) H323(Cisco) traffic (Grand Stream was doing OK so we suspected SIPURA). After SIPURA firmware upgrade (What ever latest) started working correctly. No confirmed reason but Firmware upgrade did the trick. - SamW -Original Message- From: Andres [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 02, 2004 11:06 PM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Sipura 2000 not ringing. Hi Sam, Can you elaborate on the rtp issues you saw? I am interested in hearing about them. Regards, Andres. - Original Message - From: SamW [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, March 02, 2004 3:19 PM Subject: RE: [Asterisk-Users] Sipura 2000 not ringing. Did you try to upgrade the firmware?, some issues we saw with rtp stream, went away after a firmware upgrade. http://www.sipura.com -SamW -Original Message- From: Mark Messmore, Technical Support, University Telcom Inc. [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 02, 2004 1:59 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Sipura 2000 not ringing. I was just wondering if anyone has had this situation...or one similar to it. I've got a Sipura SPA 2000. After hooking it up and configuring it with my * box, it has worked well. From both lines we are able to dial out at any point in time. However after a few minutes (5-10 usually) the Sipura will stop sending a ringer signal to the phones. We can still dial, * shows that it is ringing those SIP clients, and both lines are still shown as being registered. Everything will work fine for the first 5-10 minutes after being rebooted...however after that there is silence. Even if I dial the line from my cell phone and pick up the telephone that I am dialing...there is dial-tone...therefore it seems that the Sipura is just not passing those incoming calls after a short time period. If you have any idea why this is happening I'd sure appreciate hearing your thoughts. Thanks Mark ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Sipura 2000 not ringing.
Did you try to upgrade the firmware?, some issues we saw with rtp stream, went away after a firmware upgrade. http://www.sipura.com -SamW -Original Message- From: Mark Messmore, Technical Support, University Telcom Inc. [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 02, 2004 1:59 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Sipura 2000 not ringing. I was just wondering if anyone has had this situation...or one similar to it. I've got a Sipura SPA 2000. After hooking it up and configuring it with my * box, it has worked well. From both lines we are able to dial out at any point in time. However after a few minutes (5-10 usually) the Sipura will stop sending a ringer signal to the phones. We can still dial, * shows that it is ringing those SIP clients, and both lines are still shown as being registered. Everything will work fine for the first 5-10 minutes after being rebooted...however after that there is silence. Even if I dial the line from my cell phone and pick up the telephone that I am dialing...there is dial-tone...therefore it seems that the Sipura is just not passing those incoming calls after a short time period. If you have any idea why this is happening I'd sure appreciate hearing your thoughts. Thanks Mark ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Sipura 2000 not ringing.
Mark Messmore, Technical Support, University Telcom Inc. wrote: I was just wondering if anyone has had this situation...or one similar to it. I've got a Sipura SPA 2000. After hooking it up and configuring it with my * box, it has worked well. From both lines we are able to dial out at any point in time. However after a few minutes (5-10 usually) the Sipura will stop sending a ringer signal to the phones. We can still dial, * shows that it is ringing those SIP clients, and both lines are still shown as being registered. Everything will work fine for the first 5-10 minutes after being rebooted...however after that there is silence. Even if I dial the line from my cell phone and pick up the telephone that I am dialing...there is dial-tone...therefore it seems that the Sipura is just not passing those incoming calls after a short time period. If you have any idea why this is happening I'd sure appreciate hearing your thoughts. Thanks I had (and still have) similar problem. Once SPA 2000 registers with * it all works well for few minutes. After that all incoming calls are not answered by SPA 2000. Is that what you mean? If so, I have temporaraly got SPA 2000 to re-register every 3 minutes. This seems to work at the moment. (Sipura tech support known about this problem for about 6-8 weeks now, but I am still to hear from them). Ta SJ ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Sipura 2000 not ringing.
Well thanks for letting me know that I'm not the only one having this problem. I'll be sure to try that out...that should at least be a temporary fix. I've also put in a tech-support ticket through Atacom...who I got the SPA 2000 from. I hope that we can get this all figured out. If I hear anything I'll be sure to let you know. Mark -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Senad Jordanovic Sent: Tuesday, March 02, 2004 3:58 PM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] Sipura 2000 not ringing. Mark Messmore, Technical Support, University Telcom Inc. wrote: I was just wondering if anyone has had this situation...or one similar to it. I've got a Sipura SPA 2000. After hooking it up and configuring it with my * box, it has worked well. From both lines we are able to dial out at any point in time. However after a few minutes (5-10 usually) the Sipura will stop sending a ringer signal to the phones. We can still dial, * shows that it is ringing those SIP clients, and both lines are still shown as being registered. Everything will work fine for the first 5-10 minutes after being rebooted...however after that there is silence. Even if I dial the line from my cell phone and pick up the telephone that I am dialing...there is dial-tone...therefore it seems that the Sipura is just not passing those incoming calls after a short time period. If you have any idea why this is happening I'd sure appreciate hearing your thoughts. Thanks I had (and still have) similar problem. Once SPA 2000 registers with * it all works well for few minutes. After that all incoming calls are not answered by SPA 2000. Is that what you mean? If so, I have temporaraly got SPA 2000 to re-register every 3 minutes. This seems to work at the moment. (Sipura tech support known about this problem for about 6-8 weeks now, but I am still to hear from them). Ta SJ ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Sipura 2000 not ringing.
Mark Messmore, Technical Support, University Telcom Inc. wrote: I was just wondering if anyone has had this situation...or one similar to it. I've got a Sipura SPA 2000. After hooking it up and configuring it with my * box, it has worked well. From both lines we are able to dial out at any point in time. However after a few minutes (5-10 usually) the Sipura will stop sending a ringer signal to the phones. We can still dial, * shows that it is ringing those SIP clients, and both lines are still shown as being registered. Everything will work fine for the first 5-10 minutes after being rebooted...however after that there is silence. Even if I dial the line from my cell phone and pick up the telephone that I am dialing...there is dial-tone...therefore it seems that the Sipura is just not passing those incoming calls after a short time period. If you have any idea why this is happening I'd sure appreciate hearing your thoughts. Thanks I had (and still have) similar problem. Once SPA 2000 registers with * it all works well for few minutes. After that all incoming calls are not answered by SPA 2000. Is that what you mean? If so, I have temporaraly got SPA 2000 to re-register every 3 minutes. This seems to work at the moment. Are you sure you configured the SPA to send a keep alive message every 15-30 seconds? Sounds to me like the NAT binding is simply closing up and getting reopened with the frequent registrations. (Sipura tech support known about this problem for about 6-8 weeks now, but I am still to hear from them). Ta SJ ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Sipura 2000 not ringing.
Hi Sam, Can you elaborate on the rtp issues you saw? I am interested in hearing about them. Regards, Andres. - Original Message - From: SamW [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, March 02, 2004 3:19 PM Subject: RE: [Asterisk-Users] Sipura 2000 not ringing. Did you try to upgrade the firmware?, some issues we saw with rtp stream, went away after a firmware upgrade. http://www.sipura.com -SamW -Original Message- From: Mark Messmore, Technical Support, University Telcom Inc. [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 02, 2004 1:59 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Sipura 2000 not ringing. I was just wondering if anyone has had this situation...or one similar to it. I've got a Sipura SPA 2000. After hooking it up and configuring it with my * box, it has worked well. From both lines we are able to dial out at any point in time. However after a few minutes (5-10 usually) the Sipura will stop sending a ringer signal to the phones. We can still dial, * shows that it is ringing those SIP clients, and both lines are still shown as being registered. Everything will work fine for the first 5-10 minutes after being rebooted...however after that there is silence. Even if I dial the line from my cell phone and pick up the telephone that I am dialing...there is dial-tone...therefore it seems that the Sipura is just not passing those incoming calls after a short time period. If you have any idea why this is happening I'd sure appreciate hearing your thoughts. Thanks Mark ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
