Re: [asterisk-users] UK CallerID -v- Wildcard W100P
> > Given the PSTN rings once a month if that - all the rest is SIP via > > ITSP, I can't justify the cost of 5 times a telephone for a card - but > > thanks for the heads up GK old chap. > > > It's not a big issue - but an irritation if anything. I suspect a £2.50 > > callerID unit, a serial IC and a soldering iron may end up being the > > solution :-) > > Good luck then - but do make sure the line is actually presenting caller > ID first! I had issues with some telewest lines until I ported them into > VoIP... Looks like it's possible to modify some of the old BT Caller Display units with nothing more than about a fivers worth of parts all in. I'll put it in the 'rainy day' project list. If PSTN was more of an issue I'd go with the card you suggest - it's just not a big enough deal to worry with it - but thanks. Really appreciated. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] UK CallerID -v- Wildcard W100P
Brian wrote: > At the risk of being flamed > > Has anyone had any success get the 'El cheapo' Wildcard W100P > clone's (£20 flavour) to work with UK Caller ID? > > I'm not sure what the status of Asterisk 1.6 is with respect > to UK caller ID, being that we have an odd method of sending > the FSK ahead of the ring, but I'm guessing I can't be the > first to ask this? Nope, I asked some years ago :) I could never get my Wildcard clone to work with UK CLID, no matter what patches I applied. I gave up in the end & implemented a very roundabout solution using a Pace modem, second computer, and a database... It worked, albeit a little slowly. > > Keeping in mind that cost is the most important factor, my > searches I've found a couple of suggestions - the most > promising of which was reading the CID from a serial modem. > However, I've tried a couple - on of which is a BT Enabler > that no amount of AT commands can get to give up the CID > - and concluded that the chances of finding a compatible > modem are probably slimer than getting the clone to work. There are a very small number of modems which work with CLID. Pace being the only ones that I know of, which worked reliably... and Pace went bust years ago. You can pick up 2nd hand Pace modems off eBay, but by the time you've done that, you may as well have bought an A400P card... which will do UK CLID out of the box. If you want to take the Modem route, send me a mail off-list, as I have an implementation that may work for you. > > Has anyone been able to get the cheap clone cards to offer > CID in the UK? Only the A400P. But, TBH, at £55 with 1xFXO module, that's pretty cheap these days. I can heartily recommend them for being a) more reliable, and b) quicker at CLID detection than the modem option... HTH. Ade. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] UK CallerID -v- Wildcard W100P
On Thu, 4 Mar 2010, Brian wrote: (your email is a bit weird - my clients not quoting it right )-: On Thu, 2010-03-04 at 15:35 +, Gordon Henderson wrote: On Thu, 4 Mar 2010, Brian wrote: > At the risk of being flamed > Has anyone had any success get the 'El cheapo' Wildcard W100P clone's > (£20 flavour) to work with UK Caller ID? Looks like there is a patch to Zaptel to make it work: http://www.voip-info.org/wiki/view/Asterisk+and+UK+Caller+ID but who knows if it's in & working... I hear that it does with Zaptel - but Asterisk 1.6 - DAHDI ;-) So use 1.2 and Zaptel then... Works for me. I have no reason not desire to even think about 1.6 right now... There are 1000's other still sticking to 1.2... I have ventured into 1.4 territory though, but oddly enough, it doesn't yet give me as secure a feeling as 1.2 does... http://www.voipon.co.uk/openvox-a400p01-p-669.html Given the PSTN rings once a month if that - all the rest is SIP via ITSP, I can't justify the cost of 5 times a telephone for a card - but thanks for the heads up GK old chap. It's not a big issue - but an irritation if anything. I suspect a £2.50 callerID unit, a serial IC and a soldering iron may end up being the solution :-) Good luck then - but do make sure the line is actually presenting caller ID first! I had issues with some telewest lines until I ported them into VoIP... Gordon-- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] UK CallerID -v- Wildcard W100P
On Thu, 2010-03-04 at 15:35 +, Gordon Henderson wrote: > On Thu, 4 Mar 2010, Brian wrote: > > > At the risk of being flamed > > > Has anyone had any success get the 'El cheapo' Wildcard W100P clone's > > (£20 flavour) to work with UK Caller ID? > > Looks like there is a patch to Zaptel to make it work: > >http://www.voip-info.org/wiki/view/Asterisk+and+UK+Caller+ID > > but who knows if it's in & working... I hear that it does with Zaptel - but Asterisk 1.6 - DAHDI ;-) > > > I'm not sure what the status of Asterisk 1.6 is with respect to UK > > caller ID, being that we have an odd method of sending the FSK ahead of > > the ring, but I'm guessing I can't be the first to ask this? > > We do a line polarity reversal, then FSK the caller ID, then ring the > line... I didn't want to go into the specifics but yes, the LR is noted. > > > Keeping in mind that cost is the most important factor, my searches I've > > found a couple of suggestions - the most promising of which was reading > > the CID from a serial modem. However, I've tried a couple - on of which > > is a BT Enabler that no amount of AT commands can get to give up the CID > > - and concluded that the chances of finding a compatible modem are > > probably slimer than getting the clone to work. > > > Has anyone been able to get the cheap clone cards to offer CID in the > > UK? > > My definition of a cheap clone card is somewhat different from yours, but > for £55.50 + VAT, I use these: > >http://www.voipon.co.uk/openvox-a400p01-p-669.html Given the PSTN rings once a month if that - all the rest is SIP via ITSP, I can't justify the cost of 5 times a telephone for a card - but thanks for the heads up GK old chap. It's not a big issue - but an irritation if anything. I suspect a £2.50 callerID unit, a serial IC and a soldering iron may end up being the solution :-) -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] UK CallerID -v- Wildcard W100P
On Thu, 4 Mar 2010, Brian wrote: At the risk of being flamed Has anyone had any success get the 'El cheapo' Wildcard W100P clone's (£20 flavour) to work with UK Caller ID? Looks like there is a patch to Zaptel to make it work: http://www.voip-info.org/wiki/view/Asterisk+and+UK+Caller+ID but who knows if it's in & working... I'm not sure what the status of Asterisk 1.6 is with respect to UK caller ID, being that we have an odd method of sending the FSK ahead of the ring, but I'm guessing I can't be the first to ask this? We do a line polarity reversal, then FSK the caller ID, then ring the line... Keeping in mind that cost is the most important factor, my searches I've found a couple of suggestions - the most promising of which was reading the CID from a serial modem. However, I've tried a couple - on of which is a BT Enabler that no amount of AT commands can get to give up the CID - and concluded that the chances of finding a compatible modem are probably slimer than getting the clone to work. Has anyone been able to get the cheap clone cards to offer CID in the UK? My definition of a cheap clone card is somewhat different from yours, but for £55.50 + VAT, I use these: http://www.voipon.co.uk/openvox-a400p01-p-669.html Gordon-- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] UK CallerID ..
On Sat, Nov 26, 2005 at 05:30:49PM +, [EMAIL PROTECTED] wrote: > Hello All, > > I'm currently running CVS-HEAD-05/28/05-20:52:10 which is quite old and was > looking to upgrade to 1.2. I have three hopefully simple questions: > > 1) Do the patches from http://www.lusyn.com/asterisk/patches.html still > need to be applied for the X100P ? Yes. > 2) I noticed on the site that 1.2 beta is listed. Has anyone managed to > apply the patches to 1.2 stable ? Yes -- Tzafrir Cohen | [EMAIL PROTECTED] | VIM is http://tzafrir.org.il | | a Mutt's [EMAIL PROTECTED] | | best ICQ# 16849755 | | friend ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] UK CallerID patch with 1.0.7 / 1-0 CVS
On Monday 11 April 2005 10:06, Gavin Hamill wrote: > Hullo :) Bah, I got bitten by my own hacks. Things are now working much better than before :) I'd forgotten that I'd commented out the line: if (p->use_callerid && p->cid_start == CID_START_USEHIST) in my previous CVS version, and this made CID work. The source of the confusion was I'd put the three 'usecallerid' commands in zapata.conf AFTER a 'channel=1' statement, so they were getting lost... I've moved them up the config file and now not only does incoming CID work, but the phone is answered immediately rather than waiting for the Bellcore CID to not find any data :) Another happy ending :) Cheers, Gavin. ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] UK CallerID
Hi George, Could you send me your ISDN config if possible. I managed to get my new BT ISDN30 line working last night but wasn't getting any incoming callerid. I hoped this was because I only asked BT to enable CallerID yesterday morning. The ISDN is on a different site so its not easy for me to test at the moment, hence why I would like to confident I have it setup correctly. Thanks very much Alex -Original Message- From: George Gardiner [mailto:[EMAIL PROTECTED] Sent: 27 October 2004 10:29 To: [EMAIL PROTECTED] Subject: [Asterisk-Users] UK CallerID Sometime ago I posted a query about CallerID not working on one of my analog channels on my BT Home Highway ISDN. It subsequently turns out that I only had CallerID enabled on one of the analog numbers, not both. Entirely my fault for not checking both lines. Now that CallerID is enabled on the second channel it works a treat. Many thanks to everyone who did the programming on this. Presumably one can set the CallerID commands in zapata.conf on a per channel basis, or is this a global setting? Apologies if that is an elementary question which I should already know. If it is a global setting, then that means you would not be able to enable CallerID if some of the lines are not CallerID enabled. (Asterisk won't answer a line if it is expecting CallerID and it isn't enabled.) ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users This email and any attached files are confidential and copyright protected. If you are not the addressee, any dissemination, distribution or copying of this communication is strictly prohibited. Unless otherwise expressly agreed in writing, nothing stated in this communication shall be legally binding. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] UK Callerid bug #1719 & TDM400p
thanks for the reply Dan Does anyone know if the history buffer CID patch still works with the latest cvs? Robb Dan Tucny wrote: The ast-UK-and-DTMF-pol-CID.diff patch will only work for the tdm400 FXO modules due to the fact that the x101p is not capable of detecting polarity reversal events. Dan On Fri, 2004-09-10 at 17:38, Robert Boardman wrote: should this work with the x101p? or just the tdm400? Thanks for your help Robb Edward Eastman wrote: Brilliant - thanks, took me half an hour but it's working now. Just for the record, settings as follows: The patch on http://bugs.digium.com/bug_view_page.php?bug_id=009 (ast-UK-and-DTMF-pol-CID.diff) doesn't seem to work for current cvs, but I backed up to cvs as of 31/08/04 and that worked fine. Zapata.conf: usecallerid=yes cidsignalling=v23 cidstart=polarity usecallerid=uk doesn't work, has this changed somewhere along the way, or is this something else? Caller ID detects fine, although I get this logged to asterisk console: Sep 6 13:56:22 WARNING[393238]: chan_zap.c:3369 zt_handle_event: Didn't finish Caller-ID spill. Cancelling. I'll try and add this to the wiki when I get time Thanks Ed -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Soren Rathje Sent: 06 September 2004 13:13 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] UK Callerid bug #1719 & TDM400p Edward Eastman wrote: Hi Is this patch (http://bugs.digium.com/bug_view_page.php?bug_id=0001719) the best/only way to get callerid working in the UK with a tdm400p? I thought I'd seen a patch that'd gone into cvs, but maybe I was just imagining things ;) Check the bug tracker for id=9, there has been some development here. UK BT CLIP and DTMF CLIP for the TDM400 (will not work for the X100P) is now merged into one patch. /Soren ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] UK Callerid bug #1719 & TDM400p
The ast-UK-and-DTMF-pol-CID.diff patch will only work for the tdm400 FXO modules due to the fact that the x101p is not capable of detecting polarity reversal events. Dan On Fri, 2004-09-10 at 17:38, Robert Boardman wrote: > should this work with the x101p? or just the tdm400? > > Thanks for your help > > Robb > > Edward Eastman wrote: > > >Brilliant - thanks, took me half an hour but it's working now. > > > >Just for the record, settings as follows: > > > >The patch on http://bugs.digium.com/bug_view_page.php?bug_id=009 > >(ast-UK-and-DTMF-pol-CID.diff) doesn't seem to work for current cvs, but I > >backed up to cvs as of 31/08/04 and that worked fine. > > > >Zapata.conf: > > > >usecallerid=yes > >cidsignalling=v23 > >cidstart=polarity > > > >usecallerid=uk doesn't work, has this changed somewhere along the way, or is > >this something else? > > > >Caller ID detects fine, although I get this logged to asterisk console: > > > >Sep 6 13:56:22 WARNING[393238]: chan_zap.c:3369 zt_handle_event: Didn't > >finish Caller-ID spill. Cancelling. > > > >I'll try and add this to the wiki when I get time > > > >Thanks > > > >Ed > > > >-Original Message- > >From: [EMAIL PROTECTED] > >[mailto:[EMAIL PROTECTED] On Behalf Of Soren Rathje > >Sent: 06 September 2004 13:13 > >To: Asterisk Users Mailing List - Non-Commercial Discussion > >Subject: Re: [Asterisk-Users] UK Callerid bug #1719 & TDM400p > > > >Edward Eastman wrote: > > > > > >>>Hi > >>> > >>> > >>> > >>>Is this patch > >>>(http://bugs.digium.com/bug_view_page.php?bug_id=0001719) the > >>>best/only way to get callerid working in the UK with a tdm400p? I > >>>thought I'd seen a patch that'd gone into cvs, but maybe I was just > >>>imagining things ;) > >>> > >>> > >>> > >>> > >>> > > > >Check the bug tracker for id=9, there has been some development here. UK BT > >CLIP and DTMF CLIP for the TDM400 (will not work for the X100P) is now > >merged into one patch. > > > >/Soren > > > >___ > >Asterisk-Users mailing list > >[EMAIL PROTECTED] > >http://lists.digium.com/mailman/listinfo/asterisk-users > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > >___ > >Asterisk-Users mailing list > >[EMAIL PROTECTED] > >http://lists.digium.com/mailman/listinfo/asterisk-users > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] UK Callerid bug #1719 & TDM400p
should this work with the x101p? or just the tdm400? Thanks for your help Robb Edward Eastman wrote: Brilliant - thanks, took me half an hour but it's working now. Just for the record, settings as follows: The patch on http://bugs.digium.com/bug_view_page.php?bug_id=009 (ast-UK-and-DTMF-pol-CID.diff) doesn't seem to work for current cvs, but I backed up to cvs as of 31/08/04 and that worked fine. Zapata.conf: usecallerid=yes cidsignalling=v23 cidstart=polarity usecallerid=uk doesn't work, has this changed somewhere along the way, or is this something else? Caller ID detects fine, although I get this logged to asterisk console: Sep 6 13:56:22 WARNING[393238]: chan_zap.c:3369 zt_handle_event: Didn't finish Caller-ID spill. Cancelling. I'll try and add this to the wiki when I get time Thanks Ed -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Soren Rathje Sent: 06 September 2004 13:13 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] UK Callerid bug #1719 & TDM400p Edward Eastman wrote: Hi Is this patch (http://bugs.digium.com/bug_view_page.php?bug_id=0001719) the best/only way to get callerid working in the UK with a tdm400p? I thought I'd seen a patch that'd gone into cvs, but maybe I was just imagining things ;) Check the bug tracker for id=9, there has been some development here. UK BT CLIP and DTMF CLIP for the TDM400 (will not work for the X100P) is now merged into one patch. /Soren ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] UK Callerid bug #1719 & TDM400p
Brilliant - thanks, took me half an hour but it's working now. Just for the record, settings as follows: The patch on http://bugs.digium.com/bug_view_page.php?bug_id=009 (ast-UK-and-DTMF-pol-CID.diff) doesn't seem to work for current cvs, but I backed up to cvs as of 31/08/04 and that worked fine. Zapata.conf: usecallerid=yes cidsignalling=v23 cidstart=polarity usecallerid=uk doesn't work, has this changed somewhere along the way, or is this something else? Caller ID detects fine, although I get this logged to asterisk console: Sep 6 13:56:22 WARNING[393238]: chan_zap.c:3369 zt_handle_event: Didn't finish Caller-ID spill. Cancelling. I'll try and add this to the wiki when I get time Thanks Ed -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Soren Rathje Sent: 06 September 2004 13:13 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] UK Callerid bug #1719 & TDM400p Edward Eastman wrote: >> Hi >> >> >> >> Is this patch >> (http://bugs.digium.com/bug_view_page.php?bug_id=0001719) the >> best/only way to get callerid working in the UK with a tdm400p? I >> thought I'd seen a patch that'd gone into cvs, but maybe I was just >> imagining things ;) >> >> >> Check the bug tracker for id=9, there has been some development here. UK BT CLIP and DTMF CLIP for the TDM400 (will not work for the X100P) is now merged into one patch. /Soren ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] UK Callerid bug #1719 & TDM400p
Edward Eastman wrote: >> Hi >> >> >> >> Is this patch >> (http://bugs.digium.com/bug_view_page.php?bug_id=0001719) the >> best/only way to get callerid working in the UK with a tdm400p? I >> thought I'd seen a patch that'd gone into cvs, but maybe I was just >> imagining things ;) >> >> >> Check the bug tracker for id=9, there has been some development here. UK BT CLIP and DTMF CLIP for the TDM400 (will not work for the X100P) is now merged into one patch. /Soren ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
