Re: RE : [Asterisk-Users] Using as FAX 100% IP
I don't believe this will work, but haven't tried myself. TAFM requires spandsp. I'd do some investigation there as to whether spandsp can function with g711 (the last i checked it didn't). Good luck - if you make any progress please post to the list. -Steve Hakem Taourchi wrote: Thank you ver much for this help Steven What I am planning is this: 1-) Receive fax on a DID that is being routed in IP to the asterisk server; 2-) Based on the rule on that incoming fax, Asterisk needs to capture it, store it as pdf file and e-mail it to a predefined destinoatin (based on DID); 3-) If 2 is not possible, then send fax to PSTN destination using voip; Did you use this http://tafm.sourceforge.net/ to make ATA sepura work ? -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Steven Kokinos Envoyé : mercredi 23 février 2005 15:46 À : Asterisk Users Mailing List - Non-Commercial Discussion Objet : Re: [Asterisk-Users] Using as FAX 100% IP I'd say that would depend on the configuration you are considering. We have a number of fax machines running off of sipura spa-2000's that connect to a remote asterisk server and terminate to the pstn via voip as well. I'd say it's about 90% reliable at this point. However, we've noticed quite a bit of variability around the quality of the connection and underlying provider you are using for termination - so your results will vary. It also seems a couple of other tricks help: (1)put an ADSL filter at the fax machine end, this seems to help filter out noise from the signal and slow down the analog modem (not sure if this is an old maid's tale or not, but seems to help). (2)if you are using the sipura as your ATA, disable all of the fax detection. Just make sure you are only allowing ULAW as your codec. Other than that it's pretty straightforward. If you are looking to do something to send receive to files, etc. we haven't had any luck getting something along those lines to work w/pure voip. -Steve Hakem Taourchi wrote: Hello, Before putting any effort, I would like to know if somebody has successfully run asterisk receiving FAXs in IP and sending them out in IP as well? If yes using which components please? Any help is greatly appreciated ! ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE : [Asterisk-Users] Using as FAX 100% IP
Thank you ver much for this help Steven What I am planning is this: 1-) Receive fax on a DID that is being routed in IP to the asterisk server; 2-) Based on the rule on that incoming fax, Asterisk needs to capture it, store it as pdf file and e-mail it to a predefined destinoatin (based on DID); 3-) If 2 is not possible, then send fax to PSTN destination using voip; Did you use this http://tafm.sourceforge.net/ to make ATA sepura work ? -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Steven Kokinos Envoyé : mercredi 23 février 2005 15:46 À : Asterisk Users Mailing List - Non-Commercial Discussion Objet : Re: [Asterisk-Users] Using as FAX 100% IP I'd say that would depend on the configuration you are considering. We have a number of fax machines running off of sipura spa-2000's that connect to a remote asterisk server and terminate to the pstn via voip as well. I'd say it's about 90% reliable at this point. However, we've noticed quite a bit of variability around the quality of the connection and underlying provider you are using for termination - so your results will vary. It also seems a couple of other tricks help: (1)put an ADSL filter at the fax machine end, this seems to help filter out noise from the signal and slow down the analog modem (not sure if this is an old maid's tale or not, but seems to help). (2)if you are using the sipura as your ATA, disable all of the fax detection. Just make sure you are only allowing ULAW as your codec. Other than that it's pretty straightforward. If you are looking to do something to send receive to files, etc. we haven't had any luck getting something along those lines to work w/pure voip. -Steve Hakem Taourchi wrote: > Hello, > > Before putting any effort, I would like to know if somebody has > successfully run asterisk receiving FAXs in IP and sending them out in > IP as well? > > > > If yes using which components please? > > > > Any help is greatly appreciated ! > > > > > ___ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Using as FAX 100% IP
On February 23, 2005 09:31 am, Hakem Taourchi wrote: > Hello, > Before putting any effort, I would like to know if somebody has > successfully run asterisk receiving FAXs in IP and sending them out in > IP as well? No. Not without t.38. Googling for "asterisk fax IP site:lists.digium.com" should give you lots of the why. :-) -A. ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Using as FAX 100% IP
I'd say that would depend on the configuration you are considering. We have a number of fax machines running off of sipura spa-2000's that connect to a remote asterisk server and terminate to the pstn via voip as well. I'd say it's about 90% reliable at this point. However, we've noticed quite a bit of variability around the quality of the connection and underlying provider you are using for termination - so your results will vary. It also seems a couple of other tricks help: (1)put an ADSL filter at the fax machine end, this seems to help filter out noise from the signal and slow down the analog modem (not sure if this is an old maid's tale or not, but seems to help). (2)if you are using the sipura as your ATA, disable all of the fax detection. Just make sure you are only allowing ULAW as your codec. Other than that it's pretty straightforward. If you are looking to do something to send receive to files, etc. we haven't had any luck getting something along those lines to work w/pure voip. -Steve Hakem Taourchi wrote: Hello, Before putting any effort, I would like to know if somebody has successfully run asterisk receiving FAXs in IP and sending them out in IP as well? If yes using which components please? Any help is greatly appreciated ! ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
