Re: [Asterisk-Users] Zaptel ISDN BRI settings for The Netherlands KPN
Hello (Hallo) Remco Barende Just look at http://www.ip-phone-forum.de/forum/portal.php it's in German language but for a dutch guy no problem I gues ? Sjaak Hi list! I am installing an * box that will be installed on a site with KPN BRI ISDN in The Netherlands. I am using bristuff fron Junghanns. Does anybody know the correct settings for this? I will not have internet access there which makes it harder to google around on location. switchtype = euroisdn is pretty obvious but what about these settings: signalling = bri_cpe_ptmp ; p2p TE mode ;signalling = bri_cpe ; p2mp NT mode ;signalling = bri_net_ptmp ; p2p NT mode ;signalling = bri_net pridialplan=local prilocaldialplan=local ; trust user provided callerid (clip no screening)? pritrustusercid = yes immediate=yes channel = 1-2 Thanks!! ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Zaptel ISDN BRI settings for The Netherlands KPN
Hello Remco, Tuesday, December 28, 2004, 10:53:46 AM, you wrote: RB Does anybody know the correct settings for this? I will not have internet RB access there which makes it harder to google around on location. RB switchtype = euroisdn RB is pretty obvious but what about these settings: RB signalling = bri_cpe_ptmp RB ; p2p TE mode RB ;signalling = bri_cpe RB ; p2mp NT mode RB ;signalling = bri_net_ptmp RB ; p2p NT mode RB ;signalling = bri_net RB pridialplan=local RB prilocaldialplan=local RB ; trust user provided callerid (clip no screening)? RB pritrustusercid = yes RB immediate=yes To my experience you will need bri_cpe as signaling (point2point), immediate=no (if you have more than one numer on the ISDN), pritrustusercid = no. Regarding the pridialplan and prilocaldialplan I suggest to make some experiment there. Hope it helps ! -- Best regards, Alessiomailto:[EMAIL PROTECTED] ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Zaptel ISDN BRI settings for The Netherlands KPN
On Tue, 28 Dec 2004, Remco Barende wrote: signalling = bri_cpe_ptmp Use this to terminate a Point To Multipoint isdn line ; p2p TE mode ;signalling = bri_cpe And this if the line is point-to-point. This is likely if you have did:s or multiple isdn lines grouped together. ; p2mp NT mode ;signalling = bri_net_ptmp ; p2p NT mode ;signalling = bri_net There are for acting as a switch to other isdn equipment such as isdn phones etc. pridialplan=local prilocaldialplan=local The dialplan in Europe is often unknown which means you send the standard pots number, including any leading 0 for area codes / country codes. Talk to your pstn provider, they should be able to tell you what Type Of Number and Numbering Plan they expect you to send the dialed number (pridialplan) and your outgoing callerid (prilocaldialplan). You should also ask them how many digits they want you to send for callerid. If you use DIDs then you can ask them how many digits thay pass for DID. Peter ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
