Re: [Asterisk-Users] chan_cornet
Hi, we use the oh323 driver (see the post from Joao for installation http://www.archivum.info/asterisk-users@lists.digium.com/2005-01/msg00931.html). in the oh323.conf [general] listenPort= 192.x.x.x /the ip @ of the HG3550 fastStart=yes /*enable fast start context=voip-h323 codec=G711A in the extensions.conf exten => _0.,2,Dial,OH323/h323:[EMAIL PROTECTED],tr /* for outgoing to HiPath [voip-h323] include => default /* for incoming from HiPath. the rest are default settings. The H4K installation is more difficult. You have to use a HG3550 board. 1. install HG3550 board 2. initial installation of the loadware (use the latest version!) 3. use WebManagment to configure the routing to Asterisk. marek cervenka <[EMAIL PROTECTED]> wrote: > i agree... no H.323 support for endpoint (HG3530) but you still have h.323 (for the moment only version 2.0)> support for ip-trunking (HG3550).> So what if you have the following setup.>> [OPTIPOINT400_HFA]--[HIPAT4K][oh.323][ASTERISK]--[OPTIPOINT400_SIP].how can i configure ip-trunking from HI4K to asterisk?any example h323 conf for asterisk?---Marek CervenkaCentrum Vypocetni TechnikyCVT - http://cvt.fpf.slu.czFPF SLU OPAVA - http://www.fpf.slu.czLCNA - http://lcna.slu.cz===___Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit:http://lists.digium.com/mailman/listinfo/asterisk-users__Do You Yahoo!?Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] chan_cornet
i agree... no H.323 support for endpoint (HG3530) but you still have h.323 (for the moment only version 2.0) support for ip-trunking (HG3550). So what if you have the following setup. [OPTIPOINT400_HFA]--[HIPAT4K][oh.323][ASTERISK]--[OPTIPOINT400_SIP]. how can i configure ip-trunking from HI4K to asterisk? any example h323 conf for asterisk? --- Marek Cervenka Centrum Vypocetni Techniky CVT - http://cvt.fpf.slu.cz FPF SLU OPAVA - http://www.fpf.slu.cz LCNA- http://lcna.slu.cz === ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] chan_cornet
Hello, > Am i right when i suppose that the chan_cornet will replace the oh.323. > > [OPTIPOINT400_HFA]--[HIPAT4K][chan_cornet][ASTERISK]--[OPTIPOINT400_SIP]. Yes, that's the idea. Let's look if we have success :) cu, Steffen ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] chan_cornet
GIBERT Frédéric <[EMAIL PROTECTED]> wrote: STLS4 is a 4 BRI ports card to connect to carrier. STMD8 is a card to connect 8 ISDN Siemens phones (optiset) STMD8 is not a board for Optisets. You have to use a SLMO/SLU board to register an Optiset/Optipoint500. Do you Yahoo!? The all-new My Yahoo! Get yours free! ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] chan_cornet
Hi, i agree... no H.323 support for endpoint (HG3530) but you still have h.323 (for the moment only version 2.0) support for ip-trunking (HG3550). So what if you have the following setup. [OPTIPOINT400_HFA]--[HIPAT4K][oh.323][ASTERISK]--[OPTIPOINT400_SIP]. Am i right when i suppose that the chan_cornet will replace the oh.323. [OPTIPOINT400_HFA]--[HIPAT4K][chan_cornet][ASTERISK]--[OPTIPOINT400_SIP]. Steffen Koepf <[EMAIL PROTECTED]> wrote: Hello,> but what do you mean with *new hipath version doesn't > support H.323 anymore*? What version are you talking about? > As far as i know the new version of HiPath4000 V2.0 still > supports H.323 (STMI2).HiPath 3000 -> H.323 SupportHiPath 4000 -> NO H.323 Support and nothing else but cornet (voip).cornet-ip is basic h.323 + addons, but it does notwork with standard h.323 devices.cu,Steffen___Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit:http://lists.digium.com/mailman/listinfo/asterisk-users Do you Yahoo!? Yahoo! Mail - Helps protect you from nasty viruses.___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] chan_cornet
Hi,
You
should connect HG1500 with Ethernet port. But be careful, because in the HG1500
configuration, you need to declare nodes. This node should be the asterisk H323
[EMAIL PROTECTED] The asterisk need to be declare as a gateway, and not as a
phone!
I
never do such config, but as I was working for siemens, I know the HG1500. Be
careful, because siemens had cornet over H323 in is protocol, and it's an old
version of H323.
STLS4
is a 4 BRI ports card to connect to carrier.
STMD8
is a card to connect 8 ISDN Siemens phones (optiset)
Bye
-Message d'origine-De :
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]De la part de Joao
PereiraEnvoyé : mercredi 5 janvier 2005
17:23À : Asterisk Users Mailing List - Non-Commercial
DiscussionObjet : Re: [Asterisk-Users] chan_cornet
Hi
Yes, Im looking a way to connect Asterisk to HG.
I have already oh323 configured in Asterisk, but
I cant connect to the Siemens HG PBX by ethernet, because the HG doesnt
support normal H.323.
How are you connecting Asterisk with the HG PBX?
Are you connecting thru witch port ? ethernet, Analog, or
digital?
Whats STLS4 and STMD8? All pages with theese
products are in german
Thanks
João Pereira
PS: Sorry Steffen, but I didnt saw your email when I sent
the email to tyhe list.
- Original Message -
From:
richard
Coco
To: Asterisk Users Mailing List -
Non-Commercial Discussion
Sent: Wednesday, January 05, 2005 1:38
PM
Subject: Re: [Asterisk-Users]
chan_cornet
What do you mean with *But doesnt Digium have
Asterisk-HiPath solutions?*. If you are meaning a connection with Digium
cards so... sorry i've never used Digium cards.
But i thought (see your first thread
*connect Asterisk with Siemens HiPath HG1500*), you are looking for a way to
connect Asterisk to the HG. If you use HG1500 you have to
configure a h323 channel (h.323 or oh.323).
If not, you can try
to configure chan_capi and try to connect Asterisk (e.g with an
EICON Diva card) to a STLS4 (for HiPath3500) or a
STMD8 (for HiPath3700).
hope it will help...
if in a few days you have additional informations about chan_cornet,
please let me (the list) know.
thx
Joao Pereira <[EMAIL PROTECTED]>
wrote:
Hi
I dont know if Steffen's chan_cornet is working. I emailed
him, but with no result.
Yesterday I read this article
http://www.voip-info.org/tiki-index.php?page=Siemens+Hicom
It has some solutions... but not yet a direct
Asterisk-HiPath connection.
But doesnt Digium have Asterisk-HiPath
solutions?
Joao
- Original Message -
From:
richard Coco
To: Asterisk Users Mailing
List - Non-Commercial Discussion
Sent: Wednesday, January 05, 2005
12:13 PM
Subject: Re: [Asterisk-Users]
chan_cornet
Hi,
The HG1500 is a HiPath3000 board and i don't have experience with
Asterisk and HiPath3K.
What we have is an Asterisk connected to a Siemens HiPath4000 over
a H.323 trunk using oh323 and the HG3550 board. It works fine. But the
Siemens HG3550 only supports H.323 V2.0 (so not a lot of features are
available). May be Steffen's chan_cornet will change this.
Are there any news about this project?Joao Pereira
<[EMAIL PROTECTED]> wrote:
Hibut
did anyone have ever used a Siemens HiPath PBX with Asterisk?If
you made it, please tell me how...I read that chan_cornet does
exist...http://lists.digium.com/pipermail/asterisk-users/2004-October/069559.htmlIs
there any Digium Hardware solution for the Asterisk HiPath
connection?ThanksJoao Pereira- Original
Message -From: "Luís Palma" <[EMAIL PROTECTED]>To:
"Asterisk Users Mailing List - Non-Commercial
Discussion"Sent: Tuesday,
January 04, 2005 10:30 PMSubject: Re: [Asterisk-Users] connect
Asterisk with Siemens HiPath HG1500>
Hi,>> It doesn't tell you much but it looks like that
you are not alone when> trying to integrate with Siemens Hicom.
It seems someone has decided> to make it by
himself.>>
http://www.voip-info.org/tiki-index.php?page=Siemens+Hicom>>
Regards> Luis Palma>> On Tue, 4 Jan 2005 12:26:38
-, Joao Pereira <[EMAIL PROTECTED]>wrote:> >
Hi> > I want to know the best way to connect Asterisk to a
Siemens HiPathHG1500> > PBX. Until now I came out with 3
Re: [Asterisk-Users] chan_cornet
Hi
Yes, Im looking a way to connect Asterisk to HG.
I have already oh323 configured in Asterisk, but I
cant connect to the Siemens HG PBX by ethernet, because the HG doesnt
support normal H.323.
How are you connecting Asterisk with the HG PBX?
Are you connecting thru witch port ? ethernet, Analog, or
digital?
Whats STLS4 and STMD8? All pages with theese
products are in german
Thanks
João Pereira
PS: Sorry Steffen, but I didnt saw your email when I sent
the email to tyhe list.
- Original Message -
From:
richard
Coco
To: Asterisk Users Mailing List -
Non-Commercial Discussion
Sent: Wednesday, January 05, 2005 1:38
PM
Subject: Re: [Asterisk-Users] chan_cornet
What do you mean with *But doesnt Digium have
Asterisk-HiPath solutions?*. If you are meaning a connection with Digium cards
so... sorry i've never used Digium cards.
But i thought (see your first thread
*connect Asterisk with Siemens HiPath HG1500*), you are looking for a way to
connect Asterisk to the HG. If you use HG1500 you have to configure
a h323 channel (h.323 or oh.323).
If not, you can try
to configure chan_capi and try to connect Asterisk (e.g with an
EICON Diva card) to a STLS4 (for HiPath3500) or a
STMD8 (for HiPath3700).
hope it will help...
if in a few days you have additional informations about chan_cornet,
please let me (the list) know.
thx
Joao Pereira <[EMAIL PROTECTED]> wrote:
Hi
I dont know if Steffen's chan_cornet is working. I emailed
him, but with no result.
Yesterday I read this article
http://www.voip-info.org/tiki-index.php?page=Siemens+Hicom
It has some solutions... but not yet a direct
Asterisk-HiPath connection.
But doesnt Digium have Asterisk-HiPath
solutions?
Joao
- Original Message -
From:
richard Coco
To: Asterisk Users Mailing List
- Non-Commercial Discussion
Sent: Wednesday, January 05, 2005
12:13 PM
Subject: Re: [Asterisk-Users]
chan_cornet
Hi,
The HG1500 is a HiPath3000 board and i don't have experience with
Asterisk and HiPath3K.
What we have is an Asterisk connected to a Siemens HiPath4000 over a
H.323 trunk using oh323 and the HG3550 board. It works fine. But the
Siemens HG3550 only supports H.323 V2.0 (so not a lot of features are
available). May be Steffen's chan_cornet will change this.
Are there any news about this project?Joao Pereira
<[EMAIL PROTECTED]> wrote:
Hibut
did anyone have ever used a Siemens HiPath PBX with Asterisk?If you
made it, please tell me how...I read that chan_cornet does
exist...http://lists.digium.com/pipermail/asterisk-users/2004-October/069559.htmlIs
there any Digium Hardware solution for the Asterisk HiPath
connection?ThanksJoao Pereira- Original Message
-From: "Luís Palma" <[EMAIL PROTECTED]>To: "Asterisk Users
Mailing List - Non-Commercial
Discussion"Sent: Tuesday,
January 04, 2005 10:30 PMSubject: Re: [Asterisk-Users] connect
Asterisk with Siemens HiPath HG1500> Hi,>>
It doesn't tell you much but it looks like that you are not alone
when> trying to integrate with Siemens Hicom. It seems someone
has decided> to make it by himself.>>
http://www.voip-info.org/tiki-index.php?page=Siemens+Hicom>>
Regards> Luis Palma>> On Tue, 4 Jan 2005 12:26:38
-, Joao Pereira <[EMAIL PROTECTED]>wrote:> >
Hi> > I want to know the best way to connect Asterisk to a
Siemens HiPathHG1500> > PBX. Until now I came out with 3
solutions:> >> > 1-Asterisk being a H.323 client of
the Siemens PBX (I believe it needs> > Siemens licences and
Digium hardware)> > 2-Asterisk connecting to the PSTN phones
with Voice Modems (goodideia!!!> > but its analog...
doesnt have caller information...)> > 3-Using RDIS interfaces
to connect the Siemens PBX> >> > does someone have
other ideias?> >> > Thanks> > Joao
Pereira> >> >
___> >
Asterisk-Users mailing list> >
Asterisk-Users@lists.digium.com> >
http://lists.digium.com/mailman/listinfo/asterisk-users> > To
UNSUBSCRIBE or update options visit:> >
http://lists.digium.com/mailman/listinfo/asterisk-users>
>> ___>
Asterisk-Users mailing list>
Asterisk-Users@lists.digium.com>
h
Re: [Asterisk-Users] chan_cornet
Hello, > but what do you mean with *new hipath version doesn't > support H.323 anymore*? What version are you talking about? > As far as i know the new version of HiPath4000 V2.0 still > supports H.323 (STMI2). HiPath 3000 -> H.323 Support HiPath 4000 -> NO H.323 Support and nothing else but cornet (voip). cornet-ip is basic h.323 + addons, but it does not work with standard h.323 devices. cu, Steffen ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] chan_cornet
Hello Steffen, hey it sounds very good...!!! but what do you mean with *new hipath version doesn't support H.323 anymore*? What version are you talking about? As far as i know the new version of HiPath4000 V2.0 still supports H.323 (STMI2).Steffen Koepf <[EMAIL PROTECTED]> wrote: Hello,> I dont know if Steffen's chan_cornet is working. I emailed him, but with no result.You are not patient enough ;)You got an answer one minute ago ;)No it is not ready, it is work in progress.At the moment i'm forced to get a Asterisk->SMS Gateway working here,with our old PBX, but i hope it works soon so that i can proceed withchan_cornet. At the moment, Optipoint 400 and 600s can register tothe chan_cornet, and one can call them so that they ring. There is somelittle work to be done, to get the voice working (a bit H.323 stuff),and with a little editor (for entering the numbers, the phone can't handle this), the Phone2PBX part should work. And then the next goalis the PBX2PBX stuff.That newer HiPath PBXs are worse, coz Siemens dropped the H.323-Support,that means they do not support one stand ard voip protocol. They saidthat they will support SIP in the future, but they say this for morethan a year now. That means, one can connect now that PBXs with TDM-Lines(S2M, BRI) or to another cornet-ip supporting device like IPDAs (smallersiemens pbxs that connect to a main PBX) or PBXs and hopefully, chan_cornetsometime ;). cu,Steffen___Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit:http://lists.digium.com/mailman/listinfo/asterisk-users Do you Yahoo!? The all-new My Yahoo! What will yours do?___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] chan_cornet
Hello, > I dont know if Steffen's chan_cornet is working. I emailed him, but with no > result. You are not patient enough ;) You got an answer one minute ago ;) No it is not ready, it is work in progress. At the moment i'm forced to get a Asterisk->SMS Gateway working here, with our old PBX, but i hope it works soon so that i can proceed with chan_cornet. At the moment, Optipoint 400 and 600s can register to the chan_cornet, and one can call them so that they ring. There is some little work to be done, to get the voice working (a bit H.323 stuff), and with a little editor (for entering the numbers, the phone can't handle this), the Phone2PBX part should work. And then the next goal is the PBX2PBX stuff. That newer HiPath PBXs are worse, coz Siemens dropped the H.323-Support, that means they do not support one standard voip protocol. They said that they will support SIP in the future, but they say this for more than a year now. That means, one can connect now that PBXs with TDM-Lines (S2M, BRI) or to another cornet-ip supporting device like IPDAs (smaller siemens pbxs that connect to a main PBX) or PBXs and hopefully, chan_cornet sometime ;). cu, Steffen ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] chan_cornet
What do you mean with *But doesnt Digium have Asterisk-HiPath solutions?*. If you are meaning a connection with Digium cards so... sorry i've never used Digium cards. But i thought (see your first thread *connect Asterisk with Siemens HiPath HG1500*), you are looking for a way to connect Asterisk to the HG. If you use HG1500 you have to configure a h323 channel (h.323 or oh.323). If not, you can try to configure chan_capi and try to connect Asterisk (e.g with an EICON Diva card) to a STLS4 (for HiPath3500) or a STMD8 (for HiPath3700). hope it will help... if in a few days you have additional informations about chan_cornet, please let me (the list) know. thx Joao Pereira <[EMAIL PROTECTED]> wrote: Hi I dont know if Steffen's chan_cornet is working. I emailed him, but with no result. Yesterday I read this article http://www.voip-info.org/tiki-index.php?page=Siemens+Hicom It has some solutions... but not yet a direct Asterisk-HiPath connection. But doesnt Digium have Asterisk-HiPath solutions? Joao - Original Message - From: richard Coco To: Asterisk Users Mailing List - Non-Commercial Discussion Sent: Wednesday, January 05, 2005 12:13 PM Subject: Re: [Asterisk-Users] chan_cornet Hi, The HG1500 is a HiPath3000 board and i don't have experience with Asterisk and HiPath3K. What we have is an Asterisk connected to a Siemens HiPath4000 over a H.323 trunk using oh323 and the HG3550 board. It works fine. But the Siemens HG3550 only supports H.323 V2.0 (so not a lot of features are available). May be Steffen's chan_cornet will change this. Are there any news about this project?Joao Pereira <[EMAIL PROTECTED]> wrote: Hibut did anyone have ever used a Siemens HiPath PBX with Asterisk?If you made it, please tell me how...I read that chan_cornet does exist...http://lists.digium.com/pipermail/asterisk-users/2004-October/069559.htmlIs there any Digium Hardware solution for the Asterisk HiPath connection?ThanksJoao Pereira- Original Message -From: "Luís Palma" <[EMAIL PROTECTED]>To: "Asterisk Users Mailing List - Non-Commercial Discussion"Sent: Tuesday, January 04, 2005 10:30 PMSubject: Re: [Asterisk-Users] connect Asterisk with Siemens HiPath HG1500> Hi,>> It doesn't tell you much but it looks like that you are not alone when> trying to integrate with Siemens Hicom. It seems someone has decided> to make it by himself.>> http://www.voip-info.org/tiki-index.php?page=Siemens+Hicom>> Regards> Luis Palma>> On Tue, 4 Jan 2005 12:26:38 -, Joao Pereira <[EMAIL PROTECTED]>wrote:> > Hi> > I want to know the best way to connect Asterisk to a Siemens HiPathHG1500> > PBX. Until now I came out with 3 solutions:> >> > 1-Asterisk being a H.323 client of the Siemens PBX (I believe it needs> > Siemens licences and Digium hardware)> > 2-Asterisk connecting to the PSTN phones with Voice Modems (goodideia!!!> > but its analog... doesnt have caller information...)> > 3-Using RDIS interfaces to connect the Siemens PBX> >> > does someone have other ideias?> >> > Thanks> > Joao Pereira> >> > ___> > Asterisk-Users mailing list> > Asterisk-Users@lists.digium.com> > http://lists.digium.com/mailman/listinfo/asterisk-users> > To UNSUBSCRIBE or update options visit:> > http://lists.digium.com/mailman/listinfo/asterisk-users> >> ___> Asterisk-Users mailing list> Asterisk-Users@lists.digium.com> http://lists.digium.com/mailman/listinfo/asterisk-users> To UNSUBSCRIBE or update options visit:> http://lists.digium.com/mailman/listinfo/asterisk-users>___Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit:http://lists.digium.com/mailman/listinfo/asterisk-users Do you Yahoo!?Yahoo! Mail - 250MB free storage. Do more. Manage less. ___Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users___Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit:http://lists.digium.com/mailman/listinfo/asterisk-users Do you Yahoo!? Yahoo! Mail - You care about security. So do we.___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] chan_cornet
Hi I dont know if Steffen's chan_cornet is working. I emailed him, but with no result. Yesterday I read this article http://www.voip-info.org/tiki-index.php?page=Siemens+Hicom It has some solutions... but not yet a direct Asterisk-HiPath connection. But doesnt Digium have Asterisk-HiPath solutions? Joao - Original Message - From: richard Coco To: Asterisk Users Mailing List - Non-Commercial Discussion Sent: Wednesday, January 05, 2005 12:13 PM Subject: Re: [Asterisk-Users] chan_cornet Hi, The HG1500 is a HiPath3000 board and i don't have experience with Asterisk and HiPath3K. What we have is an Asterisk connected to a Siemens HiPath4000 over a H.323 trunk using oh323 and the HG3550 board. It works fine. But the Siemens HG3550 only supports H.323 V2.0 (so not a lot of features are available). May be Steffen's chan_cornet will change this. Are there any news about this project?Joao Pereira <[EMAIL PROTECTED]> wrote: Hibut did anyone have ever used a Siemens HiPath PBX with Asterisk?If you made it, please tell me how...I read that chan_cornet does exist...http://lists.digium.com/pipermail/asterisk-users/2004-October/069559.htmlIs there any Digium Hardware solution for the Asterisk HiPath connection?ThanksJoao Pereira- Original Message -From: "Luís Palma" <[EMAIL PROTECTED]>To: "Asterisk Users Mailing List - Non-Commercial Discussion"Sent: Tuesday, January 04, 2005 10:30 PMSubject: Re: [Asterisk-Users] connect Asterisk with Siemens HiPath HG1500> Hi,>> It doesn't tell you much but it looks like that you are not alone when> trying to integrate with Siemens Hicom. It seems someone has decided> to make it by himself.>> http://www.voip-info.org/tiki-index.php?page=Siemens+Hicom>> Regards> Luis Palma>> On Tue, 4 Jan 2005 12:26:38 -, Joao Pereira <[EMAIL PROTECTED]>wrote:> > Hi> > I want to know the best way to connect Asterisk to a Siemens HiPathHG1500> > PBX. Until now I came out with 3 solutions:> >> > 1-Asterisk being a H.323 client of the Siemens PBX (I believe it needs> > Siemens licences and Digium hardware)> > 2-Asterisk connecting to the PSTN phones with Voice Modems (goodideia!!!> > but its analog... doesnt have caller information...)> > 3-Using RDIS interfaces to connect the Siemens PBX> >> > does someone have other ideias?> >> > Thanks> > Joao Pereira> >> > ___> > Asterisk-Users mailing list> > Asterisk-Users@lists.digium.com> > http://lists.digium.com/mailman/listinfo/asterisk-users> > To UNSUBSCRIBE or update options visit:> > http://lists.digium.com/mailman/listinfo/asterisk-users> >> ___> Asterisk-Users mailing list> Asterisk-Users@lists.digium.com> http://lists.digium.com/mailman/listinfo/asterisk-users> To UNSUBSCRIBE or update options visit:> http://lists.digium.com/mailman/listinfo/asterisk-users>___Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit:http://lists.digium.com/mailman/listinfo/asterisk-users Do you Yahoo!?Yahoo! Mail - 250MB free storage. Do more. Manage less. ___Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] chan_cornet
Hi, The HG1500 is a HiPath3000 board and i don't have experience with Asterisk and HiPath3K. What we have is an Asterisk connected to a Siemens HiPath4000 over a H.323 trunk using oh323 and the HG3550 board. It works fine. But the Siemens HG3550 only supports H.323 V2.0 (so not a lot of features are available). May be Steffen's chan_cornet will change this. Are there any news about this project?Joao Pereira <[EMAIL PROTECTED]> wrote: Hibut did anyone have ever used a Siemens HiPath PBX with Asterisk?If you made it, please tell me how...I read that chan_cornet does exist...http://lists.digium.com/pipermail/asterisk-users/2004-October/069559.htmlIs there any Digium Hardware solution for the Asterisk HiPath connection?ThanksJoao Pereira- Original Message -From: "Luís Palma" <[EMAIL PROTECTED]>To: "Asterisk Users Mailing List - Non-Commercial Discussion"Sent: Tuesday, January 04, 2005 10:30 PMSubject: Re: [Asterisk-Users] connect Asterisk with Siemens HiPath HG1500> Hi,>> It doesn't tell you much but it looks like that you are not alone when> trying to integrate with Siemens Hicom. It seems someone has decided> to make it by himself.>> http://www.voip-info.org/tiki-index.php?page=Siemens+Hicom>> Regards> Luis Palma>> On Tue, 4 Jan 2005 12:26:38 -, Joao Pereira <[EMAIL PROTECTED]>wrote:> > Hi> > I want to know the best way to connect Asterisk to a Siemens HiPathHG1500> > PBX. Until now I came out with 3 solutions:> >> > 1-Asterisk being a H.323 client of the Siemens PBX (I believe it needs> > Siemens licences and Digium hardware)> > 2-Asterisk connecting to the PSTN phones with Voice Modems (goodideia!!!> > but its analog... doesnt have caller information...)> > 3-Using RDIS interfaces to connect the Siemens PBX> >> > does someone have other ideias?> >> > Thanks> > Joao Pereira> >> > ___> > Asterisk-Users mailing list> > Asterisk-Users@lists.digium.com> > http://lists.digium.com/mailman/listinfo/asterisk-users> > To UNSUBSCRIBE or update options visit:> > http://lists.digium.com/mailman/listinfo/asterisk-users> >> ___> Asterisk-Users mailing list> Asterisk-Users@lists.digium.com> http://lists.digium.com/mailman/listinfo/asterisk-users> To UNSUBSCRIBE or update options visit:> http://lists.digium.com/mailman/listinfo/asterisk-users>___Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit:http://lists.digium.com/mailman/listinfo/asterisk-users Do you Yahoo!? Yahoo! Mail - 250MB free storage. Do more. Manage less.___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
