Re: [Asterisk-Users] ztdummy compile again
Kevin,
I've got the source package in /usr/src/linux-2.6.5-1.358
I also have sym links to it from /usr/src/linux and /usr/src/linux-2.6
and a sym link /lib/modules/2.6.5-1.358/build to /usr/src/linux (as
mentioned on voipinfo). If I ommit this last sym link then the complier
complains about only needing the lib headers and not the full kernel (or
something like that).
Mark
(I've checked and the .config is in the directory)
Unless you can think of something obvious I'll clean out the src
directory and redownload the kernel source and see if that helps.
Kevin Collins wrote:
Mark,
Have you checked to make sure your kernel source is in the following directory :
/usr/src/linux-2.6.5-1.358'
Makefile:434: .config: No such file or directory
It just seems to be complaining about not finding your kernel development source environment.
Kevin
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Benson
Sent: Friday, September 23, 2005 11:21 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] ztdummy compile again
When you say kernel development do you mean kernel sources (which I
have) or some other development tools/libs?
and a kernel build config file? make mrproper ? make oldconfig ? I've
done that much at least...
Mark
Kevin Collins wrote:
Looks like you don't have kernel development installed and a basic kernel build config file generated.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Benson
Sent: Friday, September 23, 2005 8:55 AM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] ztdummy compile again
Hi,
I'm still strugling with getting an easy to use conference system
implemented. I did have app_conference running, but today I upgraded
asterisk to 1.0.9 and it stopped working. I've tried following the
instructions for compiling app_conference on 1.0.7 but it didn't work.
So I went back to ztdummy (I've not had any luck getting this to compile
on FC2).
Anyhoo, I've tried again and once again ztdummy fails to compile and the
various disparate instructions on what is needed to get it running are
not helping.
If I run make linux26 then the zaptel drivers start to compile but then
spews out a load of errors.
Anyone have any ideas?
SNIP===
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o gendigits.o gendigits.c
cc -o gendigits gendigits.o -lm
./gendigits
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\"makefw.c -o makefw
./makefw tormenta2.rbt tor2fw > tor2fw.h
Loaded 69900 bytes from file
./makefw pciradio.rbt radfw > radfw.h
Loaded 42096 bytes from file
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o ztcfg.o ztcfg.c
cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DBUILDING_TONEZONE -o zonedata.lo
zonedata.c
cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DBUILDING_TONEZONE -o tonezone.lo
tonezone.c
ar rcs libtonezone.a zonedata.lo tonezone.lo
cc -o ztcfg ztcfg.o libtonezone.a -lm
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o torisatool.o torisatool.c
cc -o torisatool torisatool.o
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o ztmonitor.o ztmonitor.c
cc -o ztmonitor ztmonitor.o
cc -o ztspeed.o -c ztspeed.c
cc -o ztspeed ztspeed.o
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o zttool.o zttool.c
cc -o zttool zttool.o -lnewt
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\"zttest.c -o zttest
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o fxotune.o fxotune.c
cc -o fxotune fxotune.o -lm
/lib/modules/2.6.5-1.358/build
make -C /lib/modules/2.6.5-1.358/build SUBDIRS=/usr/src/zaptel modules
make[1]: Entering directory `/usr/src/linux-2.6.5-1.358'
Makefile:434: .config: No such file or directory
CC [M] /usr/src/zaptel/zaptel.o
In file included from /usr/src/zaptel/zconfig.h:9,
from /usr/src/zaptel/zaptel.c:40:
include/linux/config.h:4:28: linux/autoconf.h: No such file or directory
In file included from /usr/src/zaptel/zaptel.c:40:
/usr/src/zaptel/zconfig.h:10:27: linux/version.h: No such file or directory
/usr/src/zaptel/zconfig.h:68:41: missing binary operator before token "("
In file included from
RE: [Asterisk-Users] ztdummy compile again
Mark,
Have you checked to make sure your kernel source is in the following directory :
/usr/src/linux-2.6.5-1.358'
>Makefile:434: .config: No such file or directory
It just seems to be complaining about not finding your kernel development
source environment.
Kevin
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Benson
Sent: Friday, September 23, 2005 11:21 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] ztdummy compile again
When you say kernel development do you mean kernel sources (which I
have) or some other development tools/libs?
and a kernel build config file? make mrproper ? make oldconfig ? I've
done that much at least...
Mark
Kevin Collins wrote:
>Looks like you don't have kernel development installed and a basic kernel
>build config file generated.
>
>-Original Message-
>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Benson
>Sent: Friday, September 23, 2005 8:55 AM
>To: asterisk-users@lists.digium.com
>Subject: [Asterisk-Users] ztdummy compile again
>
>Hi,
>
>I'm still strugling with getting an easy to use conference system
>implemented. I did have app_conference running, but today I upgraded
>asterisk to 1.0.9 and it stopped working. I've tried following the
>instructions for compiling app_conference on 1.0.7 but it didn't work.
>
>So I went back to ztdummy (I've not had any luck getting this to compile
>on FC2).
>
>Anyhoo, I've tried again and once again ztdummy fails to compile and the
>various disparate instructions on what is needed to get it running are
>not helping.
>
>If I run make linux26 then the zaptel drivers start to compile but then
>spews out a load of errors.
>
>Anyone have any ideas?
>
>SNIP===
>
>cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
>-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o gendigits.o gendigits.c
>cc -o gendigits gendigits.o -lm
>./gendigits
>cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
>-DZAPTEL_CONFIG=\"/etc/zaptel.conf\"makefw.c -o makefw
>./makefw tormenta2.rbt tor2fw > tor2fw.h
>Loaded 69900 bytes from file
>./makefw pciradio.rbt radfw > radfw.h
>Loaded 42096 bytes from file
>cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
>-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o ztcfg.o ztcfg.c
>cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
>-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DBUILDING_TONEZONE -o zonedata.lo
>zonedata.c
>cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
>-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DBUILDING_TONEZONE -o tonezone.lo
>tonezone.c
>ar rcs libtonezone.a zonedata.lo tonezone.lo
>cc -o ztcfg ztcfg.o libtonezone.a -lm
>cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
>-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o torisatool.o torisatool.c
>cc -o torisatool torisatool.o
>cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
>-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o ztmonitor.o ztmonitor.c
>cc -o ztmonitor ztmonitor.o
>cc -o ztspeed.o -c ztspeed.c
>cc -o ztspeed ztspeed.o
>cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
>-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o zttool.o zttool.c
>cc -o zttool zttool.o -lnewt
>cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
>-DZAPTEL_CONFIG=\"/etc/zaptel.conf\"zttest.c -o zttest
>cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
>-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o fxotune.o fxotune.c
>cc -o fxotune fxotune.o -lm
>/lib/modules/2.6.5-1.358/build
>make -C /lib/modules/2.6.5-1.358/build SUBDIRS=/usr/src/zaptel modules
>make[1]: Entering directory `/usr/src/linux-2.6.5-1.358'
>Makefile:434: .config: No such file or directory
> CC [M] /usr/src/zaptel/zaptel.o
>In file included from /usr/src/zaptel/zconfig.h:9,
> from /usr/src/zaptel/zaptel.c:40:
>include/linux/config.h:4:28: linux/autoconf.h: No such file or directory
>In file included from /usr/src/zaptel/zaptel.c:40:
>/usr/src/zaptel/zconfig.h:10:27: linux/version.h: No such file or directory
>/usr/src/zaptel/zconfig.h:68:41: missing binary operator before token "("
>In file included from include/linux/kernel.h:11,
> from /usr/src/zaptel/zaptel.c:42:
>include/linux/linkage.h:5:25: asm/linkage.h: No such file or directory
>In file included from include/linux/types.h:13,
> from include/linux/kernel.h:13,
> from /usr/src/zaptel/zaptel.c:
Re: [Asterisk-Users] ztdummy compile again
When you say kernel development do you mean kernel sources (which I
have) or some other development tools/libs?
and a kernel build config file? make mrproper ? make oldconfig ? I've
done that much at least...
Mark
Kevin Collins wrote:
Looks like you don't have kernel development installed and a basic kernel build config file generated.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Benson
Sent: Friday, September 23, 2005 8:55 AM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] ztdummy compile again
Hi,
I'm still strugling with getting an easy to use conference system
implemented. I did have app_conference running, but today I upgraded
asterisk to 1.0.9 and it stopped working. I've tried following the
instructions for compiling app_conference on 1.0.7 but it didn't work.
So I went back to ztdummy (I've not had any luck getting this to compile
on FC2).
Anyhoo, I've tried again and once again ztdummy fails to compile and the
various disparate instructions on what is needed to get it running are
not helping.
If I run make linux26 then the zaptel drivers start to compile but then
spews out a load of errors.
Anyone have any ideas?
SNIP===
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o gendigits.o gendigits.c
cc -o gendigits gendigits.o -lm
./gendigits
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\"makefw.c -o makefw
./makefw tormenta2.rbt tor2fw > tor2fw.h
Loaded 69900 bytes from file
./makefw pciradio.rbt radfw > radfw.h
Loaded 42096 bytes from file
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o ztcfg.o ztcfg.c
cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DBUILDING_TONEZONE -o zonedata.lo
zonedata.c
cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DBUILDING_TONEZONE -o tonezone.lo
tonezone.c
ar rcs libtonezone.a zonedata.lo tonezone.lo
cc -o ztcfg ztcfg.o libtonezone.a -lm
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o torisatool.o torisatool.c
cc -o torisatool torisatool.o
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o ztmonitor.o ztmonitor.c
cc -o ztmonitor ztmonitor.o
cc -o ztspeed.o -c ztspeed.c
cc -o ztspeed ztspeed.o
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o zttool.o zttool.c
cc -o zttool zttool.o -lnewt
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\"zttest.c -o zttest
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o fxotune.o fxotune.c
cc -o fxotune fxotune.o -lm
/lib/modules/2.6.5-1.358/build
make -C /lib/modules/2.6.5-1.358/build SUBDIRS=/usr/src/zaptel modules
make[1]: Entering directory `/usr/src/linux-2.6.5-1.358'
Makefile:434: .config: No such file or directory
CC [M] /usr/src/zaptel/zaptel.o
In file included from /usr/src/zaptel/zconfig.h:9,
from /usr/src/zaptel/zaptel.c:40:
include/linux/config.h:4:28: linux/autoconf.h: No such file or directory
In file included from /usr/src/zaptel/zaptel.c:40:
/usr/src/zaptel/zconfig.h:10:27: linux/version.h: No such file or directory
/usr/src/zaptel/zconfig.h:68:41: missing binary operator before token "("
In file included from include/linux/kernel.h:11,
from /usr/src/zaptel/zaptel.c:42:
include/linux/linkage.h:5:25: asm/linkage.h: No such file or directory
In file included from include/linux/types.h:13,
from include/linux/kernel.h:13,
from /usr/src/zaptel/zaptel.c:42:
include/linux/posix_types.h:47:29: asm/posix_types.h: No such file or
directory
In file included from include/linux/kernel.h:13,
from /usr/src/zaptel/zaptel.c:42:
include/linux/types.h:14:23: asm/types.h: No such file or directory
In file included from include/linux/kernel.h:13,
from /usr/src/zaptel/zaptel.c:42:
include/linux/types.h:18: error: syntax error before "__kernel_dev_t"
include/linux/types.h:18: warning: type defaults to `int' in declaration
of `__kernel_dev_t'
include/linux/types.h:18: warning: data definition has no type or
storage class
include/linux/types.h:21: error: syntax error before "dev_t"
include/linux/types.h:21: warning: type defaults to `int' in declaration
of `dev_t'
include/linux/types.h:21: warning: data definition has no type or
storage class
include/linux/types.h:22: error: syntax error before "ino_t"
include/linux/types.h:22: warning: type defaults to `int' in declaration
of `ino_t'
include/linux/types.h:22: warning: data definition
RE: [Asterisk-Users] ztdummy compile again
Looks like you don't have kernel development installed and a basic kernel build
config file generated.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Benson
Sent: Friday, September 23, 2005 8:55 AM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] ztdummy compile again
Hi,
I'm still strugling with getting an easy to use conference system
implemented. I did have app_conference running, but today I upgraded
asterisk to 1.0.9 and it stopped working. I've tried following the
instructions for compiling app_conference on 1.0.7 but it didn't work.
So I went back to ztdummy (I've not had any luck getting this to compile
on FC2).
Anyhoo, I've tried again and once again ztdummy fails to compile and the
various disparate instructions on what is needed to get it running are
not helping.
If I run make linux26 then the zaptel drivers start to compile but then
spews out a load of errors.
Anyone have any ideas?
SNIP===
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o gendigits.o gendigits.c
cc -o gendigits gendigits.o -lm
./gendigits
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\"makefw.c -o makefw
./makefw tormenta2.rbt tor2fw > tor2fw.h
Loaded 69900 bytes from file
./makefw pciradio.rbt radfw > radfw.h
Loaded 42096 bytes from file
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o ztcfg.o ztcfg.c
cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DBUILDING_TONEZONE -o zonedata.lo
zonedata.c
cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DBUILDING_TONEZONE -o tonezone.lo
tonezone.c
ar rcs libtonezone.a zonedata.lo tonezone.lo
cc -o ztcfg ztcfg.o libtonezone.a -lm
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o torisatool.o torisatool.c
cc -o torisatool torisatool.o
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o ztmonitor.o ztmonitor.c
cc -o ztmonitor ztmonitor.o
cc -o ztspeed.o -c ztspeed.c
cc -o ztspeed ztspeed.o
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o zttool.o zttool.c
cc -o zttool zttool.o -lnewt
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\"zttest.c -o zttest
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o fxotune.o fxotune.c
cc -o fxotune fxotune.o -lm
/lib/modules/2.6.5-1.358/build
make -C /lib/modules/2.6.5-1.358/build SUBDIRS=/usr/src/zaptel modules
make[1]: Entering directory `/usr/src/linux-2.6.5-1.358'
Makefile:434: .config: No such file or directory
CC [M] /usr/src/zaptel/zaptel.o
In file included from /usr/src/zaptel/zconfig.h:9,
from /usr/src/zaptel/zaptel.c:40:
include/linux/config.h:4:28: linux/autoconf.h: No such file or directory
In file included from /usr/src/zaptel/zaptel.c:40:
/usr/src/zaptel/zconfig.h:10:27: linux/version.h: No such file or directory
/usr/src/zaptel/zconfig.h:68:41: missing binary operator before token "("
In file included from include/linux/kernel.h:11,
from /usr/src/zaptel/zaptel.c:42:
include/linux/linkage.h:5:25: asm/linkage.h: No such file or directory
In file included from include/linux/types.h:13,
from include/linux/kernel.h:13,
from /usr/src/zaptel/zaptel.c:42:
include/linux/posix_types.h:47:29: asm/posix_types.h: No such file or
directory
In file included from include/linux/kernel.h:13,
from /usr/src/zaptel/zaptel.c:42:
include/linux/types.h:14:23: asm/types.h: No such file or directory
In file included from include/linux/kernel.h:13,
from /usr/src/zaptel/zaptel.c:42:
include/linux/types.h:18: error: syntax error before "__kernel_dev_t"
include/linux/types.h:18: warning: type defaults to `int' in declaration
of `__kernel_dev_t'
include/linux/types.h:18: warning: data definition has no type or
storage class
include/linux/types.h:21: error: syntax error before "dev_t"
include/linux/types.h:21: warning: type defaults to `int' in declaration
of `dev_t'
include/linux/types.h:21: warning: data definition has no type or
storage class
include/linux/types.h:22: error: syntax error before "ino_t"
include/linux/types.h:22: warning: type defaults to `int' in declaration
of `ino_t'
include/linux/types.h:22: warning: data definition has no type or
storage class
include/linux/types.h:23: error: syntax error before "mode_t"
include/linux/types.h:23: warning: type defaults to `int' in declaration
of `mode_t'
include/linux/types.h:23: warning: data definition has no type or
stora
