Re: [asterisk-users] PRI Issues After Upgrade
I'm digging this back up since the problem persists. I've been attempting to figure out what's been going on and I'm at a stopping point again. Even though I swore I checked it, it turns out the two cards and the ethernet controller were all on the same IRQ. I moved the cards around so they are all isolated on their own IRQs, but the same problems persist. I'm getting all of the following: PRI Span: 1 TEI=0 MDL-ERROR (A): Got supervisory frame with F=1 in state 7(Multi-frame established) PRI Span: 1 !! Unknown IE 128 (cs0) -- Span 1: Channel 0/23 got hangup, cause 87 [Sep 29 11:55:51] WARNING[1331]: sig_pri.c:1054 pri_find_dchan: Span 1: No D-channels available! Using Primary channel as D-channel anyway! == Primary D-Channel on span 1 up PRI Span: 1 !! Unknown IE 128 (cs0) -- Span 1: Channel 0/23 got hangup, cause 14 [Sep 29 11:52:57] WARNING[15586]: app_dial.c:1452 wait_for_answer: Unable to forward frametype: 2 I've also replaced the cable from the PRI to the card, just in case… Any ideas? Stephen H. Gerstacker Sr. Database Developer Electronic Data Payment Systems Phone: 866.578.9740 ext. 114 Fax: 866.528.3854 www.edpaymentsystems.comhttp://www.edpaymentsystems.com On Sep 14, 2011, at 11:04 AM, Doug Lytle wrote: Stephen H. Gerstacker wrote: Came in this morning to more of the same: Then, if you have the ability, I'd drop 1.2 back into place and see if it's happy. But, my feeling is that you'll need to contact the provider. The other thing that comes to mind is that your PRI card is having issues. Doug -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI Issues After Upgrade
Stephen H. Gerstacker wrote: I'm just a simple programmer who happens to be the only IT guy in the office. And I'm just an IT guy, that started learning (And still am) about phone systems around 10 years ago. I was just going through the process of elimination, the differences between our configs. Doug -- Ben Franklin quote: Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI Issues After Upgrade
Stephen H. Gerstacker wrote: Is there a big difference between the two? From what I've read, a DMS100 can redirect a call off of your system, meaning that if you have an inbound call and you want to redirect it to a different number, the DMS100 will redirect the call and take your system out of the call's path. In the current setup, you'd end up using 2 lines to do the forward and keep them busy until 1 of the parties hang up. Doug -- Ben Franklin quote: Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI Issues After Upgrade
Came in this morning to more of the same: PRI Span: 1 !! Unknown IE 128 (cs0) -- Span 1: Channel 0/23 got hangup, cause 81 Also, I got a lot of this as well: [Sep 14 05:54:05] WARNING[16624]: sig_pri.c:1054 pri_find_dchan: Span 1: No D-channels available! Using Primary channel as D-channel anyway! == Primary D-Channel on span 1 up == Primary D-Channel on span 1 down [Sep 14 06:02:35] WARNING[16624]: sig_pri.c:1054 pri_find_dchan: Span 1: No D-channels available! Using Primary channel as D-channel anyway! == Primary D-Channel on span 1 up == Primary D-Channel on span 1 down [Sep 14 06:15:26] WARNING[16624]: sig_pri.c:1054 pri_find_dchan: Span 1: No D-channels available! Using Primary channel as D-channel anyway! == Primary D-Channel on span 1 up PRI Span: 1 TEI=0 MDL-ERROR (A): Got supervisory frame with F=1 in state 7(Multi-frame established) PRI Span: 1 TEI=0 MDL-ERROR (A): Got supervisory frame with F=1 in state 7(Multi-frame established) I believe those popped up under the dms100 config as well. Stephen H. Gerstacker Sr. Database Developer Electronic Data Payment Systems Phone: 866.578.9740 ext. 114 Fax: 866.528.3854 www.edpaymentsystems.comhttp://www.edpaymentsystems.com On Sep 14, 2011, at 5:31 AM, Doug Lytle wrote: Stephen H. Gerstacker wrote: Is there a big difference between the two? From what I've read, a DMS100 can redirect a call off of your system, meaning that if you have an inbound call and you want to redirect it to a different number, the DMS100 will redirect the call and take your system out of the call's path. In the current setup, you'd end up using 2 lines to do the forward and keep them busy until 1 of the parties hang up. Doug -- Ben Franklin quote: Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI Issues After Upgrade
Stephen H. Gerstacker wrote: Came in this morning to more of the same: Then, if you have the ability, I'd drop 1.2 back into place and see if it's happy. But, my feeling is that you'll need to contact the provider. The other thing that comes to mind is that your PRI card is having issues. Doug -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI Issues After Upgrade
I disabled the echo cancelled on the PRI and the same issues are still popping up: PRI Span: 1 !! Unknown IE 128 (cs0) -- Span 1: Channel 0/22 got hangup, cause 16 Anything else I can try? Stephen H. Gerstacker Sr. Database Developer Electronic Data Payment Systems Phone: 866.578.9740 ext. 114 Fax: 866.528.3854 www.edpaymentsystems.comhttp://www.edpaymentsystems.com On Sep 11, 2011, at 9:52 AM, Stephen H. Gerstacker wrote: When we moved buildings, the PRI provider specifically asked to switch to dms100. That's how the old server was as well. I'll try the echo canceller first. - Stephen H. Gerstacker On Sep 11, 2011, at 9:07, Doug Lytle supp...@drdos.infomailto:supp...@drdos.info wrote: Stephen H. Gerstacker wrote: switchtype=dms100 Are you sure that your switchtype is correct and your provider has a dms100? If not, change this to national. If so, the two things I'd try to narrow it down are: 1.) Temporarily remove the AEX410 card and test again 2.) Temporarily disable OSLEC for your echo canceller and test again. Doug -- Ben Franklin quote: Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI Issues After Upgrade
Stephen H. Gerstacker wrote: Anything else I can try? Try switchtype=national just for testing. Doug -- Ben Franklin quote: Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI Issues After Upgrade
I made the switch and everything seems to be working. It's hard to tell, since it never seems to fail for me, but fails once people get in. A question, though. When we moved the original box to our new office, they asked if we could support the dms100 setting, which worked. National seems to be working. Is there a big difference between the two? I'm just a simple programmer who happens to be the only IT guy in the office. - Stephen H. Gerstacker On Sep 13, 2011, at 10:23, Doug Lytle supp...@drdos.info wrote: Stephen H. Gerstacker wrote: Anything else I can try? Try switchtype=national just for testing. Doug -- Ben Franklin quote: Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI Issues After Upgrade
Stephen H. Gerstacker wrote: so any help would be appreciated You could start by supplying snippets of your config for the PRI. Telling us what PRI card you're using. For example, my dahdi config for my PRI: cd /etc/dahdi cat system.conf span=1,1,0,esf,b8zs bchan=1-23 dchan=24 defaultzone=us loadzone=us span=2,1,0,esf,b8zs bchan=25-47 dchan=48 defaultzone=us loadzone=us cd /etc/asterisk Show snippets of your chan_dahdi.conf switchtype=national context=definity signalling=pri_cpe echocancel=no echotraining=no echocancelwhenbridged=no pridialplan=unknown group=1 rxgain=0.0 txgain=0.0 usecallerid=yes callerid=asreceived channel=1-23 switchtype=national context=cts signalling=pri_cpe echocancel=no echotraining=no echocancelwhenbridged=no pridialplan=unknown rxgain=0.0 txgain=0.0 group=2 usecallerid=yes callerid=asreceived Doug -- Ben Franklin quote: Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] PRI Issues After Upgrade
/etc/dahdi/system.conf: # Autogenerated by /usr/sbin/dahdi_genconf on Wed Aug 31 18:10:31 2011 # If you edit this file and execute /usr/sbin/dahdi_genconf again, # your manual changes will be LOST. # Dahdi Configuration File # # This file is parsed by the Dahdi Configurator, dahdi_cfg # # Span 1: WCT1/0 Digium Wildcard TE110P T1/E1 Card 0 (MASTER) B8ZS/ESF span=1,1,0,esf,b8zs # termtype: te bchan=1-23 dchan=24 echocanceller=oslec,1-23 # Span 2: WCTDM/0 Wildcard AEX410 Board 1 fxsks=25 echocanceller=oslec,25 fxsks=26 echocanceller=oslec,26 # channel 27, WCTDM/0/2, no module. # channel 28, WCTDM/0/3, no module. # Global data loadzone = us defaultzone = us ~ /etc/asterisk/chan_dahdi.conf [trunkgroups] [channels] usecallerid=yes callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=256 echocancelwhenbridged=no callerid = asreceived faxdetect=both signalling=fxs_ks context=incoming-local group=1,2 channel = 25-26 context=incoming-ld switchtype=dms100 signalling=pri_cpe group=1,3 channel = 1-23 ~ Stephen H. Gerstacker Sr. Database Developer Electronic Data Payment Systems Phone: 866.578.9740 ext. 114 Fax: 866.528.3854 www.edpaymentsystems.comhttp://www.edpaymentsystems.com On Sep 9, 2011, at 1:05 PM, Doug Lytle wrote: Stephen H. Gerstacker wrote: so any help would be appreciated You could start by supplying snippets of your config for the PRI. Telling us what PRI card you're using. For example, my dahdi config for my PRI: cd /etc/dahdi cat system.conf span=1,1,0,esf,b8zs bchan=1-23 dchan=24 defaultzone=us loadzone=us span=2,1,0,esf,b8zs bchan=25-47 dchan=48 defaultzone=us loadzone=us cd /etc/asterisk Show snippets of your chan_dahdi.conf switchtype=national context=definity signalling=pri_cpe echocancel=no echotraining=no echocancelwhenbridged=no pridialplan=unknown group=1 rxgain=0.0 txgain=0.0 usecallerid=yes callerid=asreceived channel=1-23 switchtype=national context=cts signalling=pri_cpe echocancel=no echotraining=no echocancelwhenbridged=no pridialplan=unknown rxgain=0.0 txgain=0.0 group=2 usecallerid=yes callerid=asreceived Doug -- Ben Franklin quote: Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
