Re: [Asterisk-video] Quest for working MCU software
[#|2012-02-27T08:05:03.424-0800|SEVERE|sun-glassfish-comms-server2.0|global|_ThreadID=19;_ThreadName=SipContainer-serversWorkerThread-5060-7;_RequestID=e47b8bc5-7167-47c5-b34d-9346816342af;|The log message is null. org.apache.xmlrpc.XmlRpcException: Format string requests exactly 3 items from array, but array has 4 items. (A '*' at the end would avoid this failure) - Original Message - From: ray klassen julius_ahenobar...@yahoo.co.uk To: Development discussion of video media support in Asterisk asterisk-video@lists.digium.com Cc: Sent: Friday, 24 February 2012, 16:46 Subject: Re: [Asterisk-video] Quest for working MCU software Moving on I found where to set the sip listener in sailfin, and set it for the right ip. UDP connection issue solved. Now I'm getting circuits are busy still but the error report is now -- Got SIP response 500 Server Internal Error back from Random-IP-address:5060 (Thanks for all your help. ) - Original Message - From: ray klassen julius_ahenobar...@yahoo.co.uk To: Development discussion of video media support in Asterisk asterisk-video@lists.digium.com Cc: Sent: Wednesday, 22 February 2012, 8:14 Subject: Re: [Asterisk-video] Quest for working MCU software Yes it's sending it to the right port. On the mcuWeb end netstat -aunp shows no port udp port 5060 even open even though it reports that it is listening on those ports when you restart the server. - Original Message - From: Sergio Garcia Murillo sergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Tuesday, 21 February 2012, 14:58 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, What is the Asterisk error? Could check if it is sending the INVITE to the sailfin IP:port? Best regards Sergio El 21/02/2012 20:26, ray klassen escribió: Ok, so I pulled down the latest .sar file and updated the mcuweb module in sailfin Seemed to lose all previous configuration, at any rate, now I've got a conference server that seems happy in the web interface but responds sip port unreachable when asterisk contacts it. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Wednesday, 28 December 2011, 14:13 Subject: Re: [Asterisk-video] Quest for working MCU software Another happy customer.. ;) If you find any problem/feedback just post it here. BR Sergio El 28/12/2011 21:45, ray klassen escribió: Ah. Now it works... Lots to play with. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: ray klassenjulius_ahenobar...@yahoo.co.uk Cc: Sent: Friday, 23 December 2011, 14:01 Subject: Re: [Asterisk-video] Quest for working MCU software I see the problem: c=IN IP4 It seems that you have not configured the media IP in the media mixer confing in the mcuWeb Best regards Sergio El 23/12/2011 21:28, ray klassen escribió: here's a capture wireshark reports that packet 5 (200 Ok with session description) is malformed. 172.19.1.47 is my pbx, 172.19.1.49 is mcuWeb - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Tuesday, 20 December 2011, 16:22 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, Could you get an ethereal trace of the SIP negotiation? Usually that happens when Asterisk/FreePBX does not receive the ACK. Best regards Sergio El 16/12/2011 23:23, ray klassen escribió: Ok I plugged the new info into a trunk on my freepbx install and I set up an outgoing route to it, then I set up a conference on mcuWeb that matches the outgoing did on the route and I get some joy on the mcuWeb console (it registers my incoming userid) but the connection just drops. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Thursday, 15 December 2011, 17:57 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, Check this: http://www.medooze.com/products/mcu/open-source-installation.aspx#asterisk I have just added the info to the web. BR Sergio El 15/12/2011 21:50, ray klassen escribió: actually the question should be how does it interface with freepbx...? - Original Message - From: ray klassenjulius_ahenobar...@yahoo.co.uk To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Thursday, 15 December 2011, 11:57 Subject: Re: [Asterisk-video] Quest for working MCU software That worked ok. I Followed the media-server instructions it compiled safely and it's running and added to mcuWeb console. Now how does this interface with asterisk? - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: Development discussion of video
Re: [Asterisk-video] Quest for working MCU software
Hi Ray, You have mismatch of version in tne mcu media mixer and on the mcuWeb. Plase, make sure u are using latest versions. Br Sergio Enviado desde mi HTC - Reply message - De: ray klassen julius_ahenobar...@yahoo.co.uk Fecha: lun., feb. 27, 2012 17:07 Asunto: [Asterisk-video] Quest for working MCU software Para: Development discussion of video media support in Asterisk asterisk-video@lists.digium.com [#|2012-02-27T08:05:03.424-0800|SEVERE|sun-glassfish-comms-server2.0|global|_ThreadID=19;_ThreadName=SipContainer-serversWorkerThread-5060-7;_RequestID=e47b8bc5-7167-47c5-b34d-9346816342af;|The log message is null. org.apache.xmlrpc.XmlRpcException: Format string requests exactly 3 items from array, but array has 4 items. (A '*' at the end would avoid this failure) - Original Message - From: ray klassen julius_ahenobar...@yahoo.co.uk To: Development discussion of video media support in Asterisk asterisk-video@lists.digium.com Cc: Sent: Friday, 24 February 2012, 16:46 Subject: Re: [Asterisk-video] Quest for working MCU software Moving on I found where to set the sip listener in sailfin, and set it for the right ip. UDP connection issue solved. Now I'm getting circuits are busy still but the error report is now -- Got SIP response 500 Server Internal Error back from Random-IP-address:5060 (Thanks for all your help. ) - Original Message - From: ray klassen julius_ahenobar...@yahoo.co.uk To: Development discussion of video media support in Asterisk asterisk-video@lists.digium.com Cc: Sent: Wednesday, 22 February 2012, 8:14 Subject: Re: [Asterisk-video] Quest for working MCU software Yes it's sending it to the right port. On the mcuWeb end netstat -aunp shows no port udp port 5060 even open even though it reports that it is listening on those ports when you restart the server. - Original Message - From: Sergio Garcia Murillo sergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Tuesday, 21 February 2012, 14:58 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, What is the Asterisk error? Could check if it is sending the INVITE to the sailfin IP:port? Best regards Sergio El 21/02/2012 20:26, ray klassen escribió: Ok, so I pulled down the latest .sar file and updated the mcuweb module in sailfin Seemed to lose all previous configuration, at any rate, now I've got a conference server that seems happy in the web interface but responds sip port unreachable when asterisk contacts it. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Wednesday, 28 December 2011, 14:13 Subject: Re: [Asterisk-video] Quest for working MCU software Another happy customer.. ;) If you find any problem/feedback just post it here. BR Sergio El 28/12/2011 21:45, ray klassen escribió: Ah. Now it works... Lots to play with. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: ray klassenjulius_ahenobar...@yahoo.co.uk Cc: Sent: Friday, 23 December 2011, 14:01 Subject: Re: [Asterisk-video] Quest for working MCU software I see the problem: c=IN IP4 It seems that you have not configured the media IP in the media mixer confing in the mcuWeb Best regards Sergio El 23/12/2011 21:28, ray klassen escribió: here's a capture wireshark reports that packet 5 (200 Ok with session description) is malformed. 172.19.1.47 is my pbx, 172.19.1.49 is mcuWeb - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Tuesday, 20 December 2011, 16:22 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, Could you get an ethereal trace of the SIP negotiation? Usually that happens when Asterisk/FreePBX does not receive the ACK. Best regards Sergio El 16/12/2011 23:23, ray klassen escribió: Ok I plugged the new info into a trunk on my freepbx install and I set up an outgoing route to it, then I set up a conference on mcuWeb that matches the outgoing did on the route and I get some joy on the mcuWeb console (it registers my incoming userid) but the connection just drops. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Thursday, 15 December 2011, 17:57 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, Check this: http://www.medooze.com/products/mcu/open-source-installation.aspx#asterisk I have just added the info to the web. BR Sergio El 15/12/2011 21:50, ray klassen escribió: actually the question should be how does it interface with freepbx...? - Original Message - From: ray klassenjulius_ahenobar...@yahoo.co.uk To: Development discussion of video media support in Asteriskasterisk-video
Re: [Asterisk-video] Quest for working MCU software
What i the trace at Sailfin server.log? Best regards Sergio El 25/02/2012 1:46, ray klassen escribió: Moving on I found where to set the sip listener in sailfin, and set it for the right ip. UDP connection issue solved. Now I'm getting circuits are busy still but the error report is now -- Got SIP response 500 Server Internal Error back from Random-IP-address:5060 (Thanks for all your help. ) - Original Message - From: ray klassenjulius_ahenobar...@yahoo.co.uk To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Wednesday, 22 February 2012, 8:14 Subject: Re: [Asterisk-video] Quest for working MCU software Yes it's sending it to the right port. On the mcuWeb end netstat -aunp shows no port udp port 5060 even open even though it reports that it is listening on those ports when you restart the server. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Tuesday, 21 February 2012, 14:58 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, What is the Asterisk error? Could check if it is sending the INVITE to the sailfin IP:port? Best regards Sergio El 21/02/2012 20:26, ray klassen escribió: Ok, so I pulled down the latest .sar file and updated the mcuweb module in sailfin Seemed to lose all previous configuration, at any rate, now I've got a conference server that seems happy in the web interface but responds sip port unreachable when asterisk contacts it. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Wednesday, 28 December 2011, 14:13 Subject: Re: [Asterisk-video] Quest for working MCU software Another happy customer.. ;) If you find any problem/feedback just post it here. BR Sergio El 28/12/2011 21:45, ray klassen escribió: Ah. Now it works... Lots to play with. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: ray klassenjulius_ahenobar...@yahoo.co.uk Cc: Sent: Friday, 23 December 2011, 14:01 Subject: Re: [Asterisk-video] Quest for working MCU software I see the problem: c=IN IP4 It seems that you have not configured the media IP in the media mixer confing in the mcuWeb Best regards Sergio El 23/12/2011 21:28, ray klassen escribió: here's a capture wireshark reports that packet 5 (200 Ok with session description) is malformed. 172.19.1.47 is my pbx, 172.19.1.49 is mcuWeb - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Tuesday, 20 December 2011, 16:22 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, Could you get an ethereal trace of the SIP negotiation? Usually that happens when Asterisk/FreePBX does not receive the ACK. Best regards Sergio El 16/12/2011 23:23, ray klassen escribió: Ok I plugged the new info into a trunk on my freepbx install and I set up an outgoing route to it, then I set up a conference on mcuWeb that matches the outgoing did on the route and I get some joy on the mcuWeb console (it registers my incoming userid) but the connection just drops. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Thursday, 15 December 2011, 17:57 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, Check this: http://www.medooze.com/products/mcu/open-source-installation.aspx#asterisk I have just added the info to the web. BR Sergio El 15/12/2011 21:50, ray klassen escribió: actually the question should be how does it interface with freepbx...? - Original Message - From: ray klassenjulius_ahenobar...@yahoo.co.uk To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Thursday, 15 December 2011, 11:57 Subject: Re: [Asterisk-video] Quest for working MCU software That worked ok. I Followed the media-server instructions it compiled safely and it's running and added to mcuWeb console. Now how does this interface with asterisk? - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Wednesday, 14 December 2011, 10:03 Subject: Re: [Asterisk-video] Quest for working MCU software Hi Ray, I will check this errors and get back to you, I usually use Netbeans directly for compiling the mcuWeb application. In the mean time you can try with a binary build of the application (they are very well updated), try this one: http://sourceforge.net/projects/mcumediaserver/files/mcumediaserver/rev%20414/mcuWeb.sar/download Best regards Sergio El 14/12/2011 18:08, ray klassen escribió: The reason i went for the .vmdk fie was that I couldn't get
Re: [Asterisk-video] Quest for working MCU software
Moving on I found where to set the sip listener in sailfin, and set it for the right ip. UDP connection issue solved. Now I'm getting circuits are busy still but the error report is now -- Got SIP response 500 Server Internal Error back from Random-IP-address:5060 (Thanks for all your help. ) - Original Message - From: ray klassen julius_ahenobar...@yahoo.co.uk To: Development discussion of video media support in Asterisk asterisk-video@lists.digium.com Cc: Sent: Wednesday, 22 February 2012, 8:14 Subject: Re: [Asterisk-video] Quest for working MCU software Yes it's sending it to the right port. On the mcuWeb end netstat -aunp shows no port udp port 5060 even open even though it reports that it is listening on those ports when you restart the server. - Original Message - From: Sergio Garcia Murillo sergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Tuesday, 21 February 2012, 14:58 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, What is the Asterisk error? Could check if it is sending the INVITE to the sailfin IP:port? Best regards Sergio El 21/02/2012 20:26, ray klassen escribió: Ok, so I pulled down the latest .sar file and updated the mcuweb module in sailfin Seemed to lose all previous configuration, at any rate, now I've got a conference server that seems happy in the web interface but responds sip port unreachable when asterisk contacts it. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Wednesday, 28 December 2011, 14:13 Subject: Re: [Asterisk-video] Quest for working MCU software Another happy customer.. ;) If you find any problem/feedback just post it here. BR Sergio El 28/12/2011 21:45, ray klassen escribió: Ah. Now it works... Lots to play with. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: ray klassenjulius_ahenobar...@yahoo.co.uk Cc: Sent: Friday, 23 December 2011, 14:01 Subject: Re: [Asterisk-video] Quest for working MCU software I see the problem: c=IN IP4 It seems that you have not configured the media IP in the media mixer confing in the mcuWeb Best regards Sergio El 23/12/2011 21:28, ray klassen escribió: here's a capture wireshark reports that packet 5 (200 Ok with session description) is malformed. 172.19.1.47 is my pbx, 172.19.1.49 is mcuWeb - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Tuesday, 20 December 2011, 16:22 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, Could you get an ethereal trace of the SIP negotiation? Usually that happens when Asterisk/FreePBX does not receive the ACK. Best regards Sergio El 16/12/2011 23:23, ray klassen escribió: Ok I plugged the new info into a trunk on my freepbx install and I set up an outgoing route to it, then I set up a conference on mcuWeb that matches the outgoing did on the route and I get some joy on the mcuWeb console (it registers my incoming userid) but the connection just drops. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Thursday, 15 December 2011, 17:57 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, Check this: http://www.medooze.com/products/mcu/open-source-installation.aspx#asterisk I have just added the info to the web. BR Sergio El 15/12/2011 21:50, ray klassen escribió: actually the question should be how does it interface with freepbx...? - Original Message - From: ray klassenjulius_ahenobar...@yahoo.co.uk To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Thursday, 15 December 2011, 11:57 Subject: Re: [Asterisk-video] Quest for working MCU software That worked ok. I Followed the media-server instructions it compiled safely and it's running and added to mcuWeb console. Now how does this interface with asterisk? - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Wednesday, 14 December 2011, 10:03 Subject: Re: [Asterisk-video] Quest for working MCU software Hi Ray, I will check this errors and get back to you, I usually use Netbeans directly for compiling the mcuWeb application. In the mean time you can try with a binary build of the application (they are very well updated), try this one: http://sourceforge.net/projects/mcumediaserver/files/mcumediaserver/rev%20414/mcuWeb.sar/download Best regards Sergio El 14/12/2011 18:08, ray klassen escribió: The reason i went for the .vmdk fie was that I couldn't get the svn version
Re: [Asterisk-video] Quest for working MCU software
Yes it's sending it to the right port. On the mcuWeb end netstat -aunp shows no port udp port 5060 even open even though it reports that it is listening on those ports when you restart the server. - Original Message - From: Sergio Garcia Murillo sergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Tuesday, 21 February 2012, 14:58 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, What is the Asterisk error? Could check if it is sending the INVITE to the sailfin IP:port? Best regards Sergio El 21/02/2012 20:26, ray klassen escribió: Ok, so I pulled down the latest .sar file and updated the mcuweb module in sailfin Seemed to lose all previous configuration, at any rate, now I've got a conference server that seems happy in the web interface but responds sip port unreachable when asterisk contacts it. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Wednesday, 28 December 2011, 14:13 Subject: Re: [Asterisk-video] Quest for working MCU software Another happy customer.. ;) If you find any problem/feedback just post it here. BR Sergio El 28/12/2011 21:45, ray klassen escribió: Ah. Now it works... Lots to play with. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: ray klassenjulius_ahenobar...@yahoo.co.uk Cc: Sent: Friday, 23 December 2011, 14:01 Subject: Re: [Asterisk-video] Quest for working MCU software I see the problem: c=IN IP4 It seems that you have not configured the media IP in the media mixer confing in the mcuWeb Best regards Sergio El 23/12/2011 21:28, ray klassen escribió: here's a capture wireshark reports that packet 5 (200 Ok with session description) is malformed. 172.19.1.47 is my pbx, 172.19.1.49 is mcuWeb - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Tuesday, 20 December 2011, 16:22 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, Could you get an ethereal trace of the SIP negotiation? Usually that happens when Asterisk/FreePBX does not receive the ACK. Best regards Sergio El 16/12/2011 23:23, ray klassen escribió: Ok I plugged the new info into a trunk on my freepbx install and I set up an outgoing route to it, then I set up a conference on mcuWeb that matches the outgoing did on the route and I get some joy on the mcuWeb console (it registers my incoming userid) but the connection just drops. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Thursday, 15 December 2011, 17:57 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, Check this: http://www.medooze.com/products/mcu/open-source-installation.aspx#asterisk I have just added the info to the web. BR Sergio El 15/12/2011 21:50, ray klassen escribió: actually the question should be how does it interface with freepbx...? - Original Message - From: ray klassenjulius_ahenobar...@yahoo.co.uk To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Thursday, 15 December 2011, 11:57 Subject: Re: [Asterisk-video] Quest for working MCU software That worked ok. I Followed the media-server instructions it compiled safely and it's running and added to mcuWeb console. Now how does this interface with asterisk? - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Wednesday, 14 December 2011, 10:03 Subject: Re: [Asterisk-video] Quest for working MCU software Hi Ray, I will check this errors and get back to you, I usually use Netbeans directly for compiling the mcuWeb application. In the mean time you can try with a binary build of the application (they are very well updated), try this one: http://sourceforge.net/projects/mcumediaserver/files/mcumediaserver/rev%20414/mcuWeb.sar/download Best regards Sergio El 14/12/2011 18:08, ray klassen escribió: The reason i went for the .vmdk fie was that I couldn't get the svn version compiled. But with your help maybe... Ok I'm setting this all out in painstaking detail, because I don't know where I could be off track some of the formatting on http://www.medooze.com/products/mcu/open-source-installation.aspx has masked some steps in the file edits because the first edit shows up outside the should-be convenient code box. -a bit misleading but whatever. also some of the file.properties lines point to stuff the howto doesn't mention. Because the first time I tried this, it error-ed out, I have downloaded and installed those as well. I'm
Re: [Asterisk-video] Quest for working MCU software
Hi, Could paste the output of the netstat here? What port is configured on the Sailfin admin page for both sip listener and sip contained? Are you running Asterisk on the same server? Best regards Sergio El 22/02/2012 17:14, ray klassen escribió: Yes it's sending it to the right port. On the mcuWeb end netstat -aunp shows no port udp port 5060 even open even though it reports that it is listening on those ports when you restart the server. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Tuesday, 21 February 2012, 14:58 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, What is the Asterisk error? Could check if it is sending the INVITE to the sailfin IP:port? Best regards Sergio El 21/02/2012 20:26, ray klassen escribió: Ok, so I pulled down the latest .sar file and updated the mcuweb module in sailfin Seemed to lose all previous configuration, at any rate, now I've got a conference server that seems happy in the web interface but responds sip port unreachable when asterisk contacts it. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Wednesday, 28 December 2011, 14:13 Subject: Re: [Asterisk-video] Quest for working MCU software Another happy customer.. ;) If you find any problem/feedback just post it here. BR Sergio El 28/12/2011 21:45, ray klassen escribió: Ah. Now it works... Lots to play with. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: ray klassenjulius_ahenobar...@yahoo.co.uk Cc: Sent: Friday, 23 December 2011, 14:01 Subject: Re: [Asterisk-video] Quest for working MCU software I see the problem: c=IN IP4 It seems that you have not configured the media IP in the media mixer confing in the mcuWeb Best regards Sergio El 23/12/2011 21:28, ray klassen escribió: here's a capture wireshark reports that packet 5 (200 Ok with session description) is malformed. 172.19.1.47 is my pbx, 172.19.1.49 is mcuWeb - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Tuesday, 20 December 2011, 16:22 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, Could you get an ethereal trace of the SIP negotiation? Usually that happens when Asterisk/FreePBX does not receive the ACK. Best regards Sergio El 16/12/2011 23:23, ray klassen escribió: Ok I plugged the new info into a trunk on my freepbx install and I set up an outgoing route to it, then I set up a conference on mcuWeb that matches the outgoing did on the route and I get some joy on the mcuWeb console (it registers my incoming userid) but the connection just drops. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Thursday, 15 December 2011, 17:57 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, Check this: http://www.medooze.com/products/mcu/open-source-installation.aspx#asterisk I have just added the info to the web. BR Sergio El 15/12/2011 21:50, ray klassen escribió: actually the question should be how does it interface with freepbx...? - Original Message - From: ray klassenjulius_ahenobar...@yahoo.co.uk To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Thursday, 15 December 2011, 11:57 Subject: Re: [Asterisk-video] Quest for working MCU software That worked ok. I Followed the media-server instructions it compiled safely and it's running and added to mcuWeb console. Now how does this interface with asterisk? - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Wednesday, 14 December 2011, 10:03 Subject: Re: [Asterisk-video] Quest for working MCU software Hi Ray, I will check this errors and get back to you, I usually use Netbeans directly for compiling the mcuWeb application. In the mean time you can try with a binary build of the application (they are very well updated), try this one: http://sourceforge.net/projects/mcumediaserver/files/mcumediaserver/rev%20414/mcuWeb.sar/download Best regards Sergio El 14/12/2011 18:08, ray klassen escribió: The reason i went for the .vmdk fie was that I couldn't get the svn version compiled. But with your help maybe... Ok I'm setting this all out in painstaking detail, because I don't know where I could be off track some of the formatting on http://www.medooze.com/products/mcu/open-source-installation.aspx has masked some steps in the file edits because the first edit shows up outside the should-be convenient code box. -a bit misleading but whatever. also some of the file.properties lines
Re: [Asterisk-video] Quest for working MCU software
Hi, What is the Asterisk error? Could check if it is sending the INVITE to the sailfin IP:port? Best regards Sergio El 21/02/2012 20:26, ray klassen escribió: Ok, so I pulled down the latest .sar file and updated the mcuweb module in sailfin Seemed to lose all previous configuration, at any rate, now I've got a conference server that seems happy in the web interface but responds sip port unreachable when asterisk contacts it. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Wednesday, 28 December 2011, 14:13 Subject: Re: [Asterisk-video] Quest for working MCU software Another happy customer.. ;) If you find any problem/feedback just post it here. BR Sergio El 28/12/2011 21:45, ray klassen escribió: Ah. Now it works... Lots to play with. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: ray klassenjulius_ahenobar...@yahoo.co.uk Cc: Sent: Friday, 23 December 2011, 14:01 Subject: Re: [Asterisk-video] Quest for working MCU software I see the problem: c=IN IP4 It seems that you have not configured the media IP in the media mixer confing in the mcuWeb Best regards Sergio El 23/12/2011 21:28, ray klassen escribió: here's a capture wireshark reports that packet 5 (200 Ok with session description) is malformed. 172.19.1.47 is my pbx, 172.19.1.49 is mcuWeb - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Tuesday, 20 December 2011, 16:22 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, Could you get an ethereal trace of the SIP negotiation? Usually that happens when Asterisk/FreePBX does not receive the ACK. Best regards Sergio El 16/12/2011 23:23, ray klassen escribió: Ok I plugged the new info into a trunk on my freepbx install and I set up an outgoing route to it, then I set up a conference on mcuWeb that matches the outgoing did on the route and I get some joy on the mcuWeb console (it registers my incoming userid) but the connection just drops. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Thursday, 15 December 2011, 17:57 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, Check this: http://www.medooze.com/products/mcu/open-source-installation.aspx#asterisk I have just added the info to the web. BR Sergio El 15/12/2011 21:50, ray klassen escribió: actually the question should be how does it interface with freepbx...? - Original Message - From: ray klassenjulius_ahenobar...@yahoo.co.uk To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Thursday, 15 December 2011, 11:57 Subject: Re: [Asterisk-video] Quest for working MCU software That worked ok. I Followed the media-server instructions it compiled safely and it's running and added to mcuWeb console. Now how does this interface with asterisk? - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Wednesday, 14 December 2011, 10:03 Subject: Re: [Asterisk-video] Quest for working MCU software Hi Ray, I will check this errors and get back to you, I usually use Netbeans directly for compiling the mcuWeb application. In the mean time you can try with a binary build of the application (they are very well updated), try this one: http://sourceforge.net/projects/mcumediaserver/files/mcumediaserver/rev%20414/mcuWeb.sar/download Best regards Sergio El 14/12/2011 18:08, ray klassen escribió: The reason i went for the .vmdk fie was that I couldn't get the svn version compiled. But with your help maybe... Ok I'm setting this all out in painstaking detail, because I don't know where I could be off track some of the formatting on http://www.medooze.com/products/mcu/open-source-installation.aspx has masked some steps in the file edits because the first edit shows up outside the should-be convenient code box. -a bit misleading but whatever. also some of the file.properties lines point to stuff the howto doesn't mention. Because the first time I tried this, it error-ed out, I have downloaded and installed those as well. I'm stuck on running ant in the XmlRpcMcuClient directory -- error reports package org.apache.xmlrpc does not exist. But how could that be? Looks like a real noob error. But I've got all the paths I know of right. So here I go posting to the list. Install Log: - Vanilla Debian Squeeze amd64 install no extra packages, just ssh-server - edit /etc/apt/sources.list to include contrib and non-free - apt-get install sun-java6-jdk sun-java6-jre sun-java6-fonts sun-java6-javadb sun-java6-bin ant subversion bzip2 - download
Re: [Asterisk-video] Quest for working MCU software
Another happy customer.. ;) If you find any problem/feedback just post it here. BR Sergio El 28/12/2011 21:45, ray klassen escribió: Ah. Now it works... Lots to play with. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: ray klassenjulius_ahenobar...@yahoo.co.uk Cc: Sent: Friday, 23 December 2011, 14:01 Subject: Re: [Asterisk-video] Quest for working MCU software I see the problem: c=IN IP4 It seems that you have not configured the media IP in the media mixer confing in the mcuWeb Best regards Sergio El 23/12/2011 21:28, ray klassen escribió: here's a capture wireshark reports that packet 5 (200 Ok with session description) is malformed. 172.19.1.47 is my pbx, 172.19.1.49 is mcuWeb - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Tuesday, 20 December 2011, 16:22 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, Could you get an ethereal trace of the SIP negotiation? Usually that happens when Asterisk/FreePBX does not receive the ACK. Best regards Sergio El 16/12/2011 23:23, ray klassen escribió: Ok I plugged the new info into a trunk on my freepbx install and I set up an outgoing route to it, then I set up a conference on mcuWeb that matches the outgoing did on the route and I get some joy on the mcuWeb console (it registers my incoming userid) but the connection just drops. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Thursday, 15 December 2011, 17:57 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, Check this: http://www.medooze.com/products/mcu/open-source-installation.aspx#asterisk I have just added the info to the web. BR Sergio El 15/12/2011 21:50, ray klassen escribió: actually the question should be how does it interface with freepbx...? - Original Message - From: ray klassenjulius_ahenobar...@yahoo.co.uk To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Thursday, 15 December 2011, 11:57 Subject: Re: [Asterisk-video] Quest for working MCU software That worked ok. I Followed the media-server instructions it compiled safely and it's running and added to mcuWeb console. Now how does this interface with asterisk? - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Wednesday, 14 December 2011, 10:03 Subject: Re: [Asterisk-video] Quest for working MCU software Hi Ray, I will check this errors and get back to you, I usually use Netbeans directly for compiling the mcuWeb application. In the mean time you can try with a binary build of the application (they are very well updated), try this one: http://sourceforge.net/projects/mcumediaserver/files/mcumediaserver/rev%20414/mcuWeb.sar/download Best regards Sergio El 14/12/2011 18:08, ray klassen escribió: The reason i went for the .vmdk fie was that I couldn't get the svn version compiled. But with your help maybe... Ok I'm setting this all out in painstaking detail, because I don't know where I could be off track some of the formatting on http://www.medooze.com/products/mcu/open-source-installation.aspx has masked some steps in the file edits because the first edit shows up outside the should-be convenient code box. -a bit misleading but whatever. also some of the file.properties lines point to stuff the howto doesn't mention. Because the first time I tried this, it error-ed out, I have downloaded and installed those as well. I'm stuck on running ant in the XmlRpcMcuClient directory -- error reports package org.apache.xmlrpc does not exist. But how could that be? Looks like a real noob error. But I've got all the paths I know of right. So here I go posting to the list. Install Log: - Vanilla Debian Squeeze amd64 install no extra packages, just ssh-server - edit /etc/apt/sources.list to include contrib and non-free - apt-get install sun-java6-jdk sun-java6-jre sun-java6-fonts sun-java6-javadb sun-java6-bin ant subversion bzip2 - download sailfin-installer-v2-b31g-linux.jar - install sailfin in /usr/local/sailfin per instructions @ http://sailfin.java.net/downloads/v1-MS4.html -- successful - start mcuWeb install per instructions @ http://www.medooze.com/products/mcu/open-source-installation.aspx - download apache-xmlrpc-3.1.3-bin.tar.bz2 and untar into /usr/local/apache-xmlrpc-3.1.3 - cd /usr/local/src - svn checkout https://mcumediaserver.svn.sourceforge.net/svnroot/mcumediaserver mcu - edit /usr/local/src/mcu/XmlRpcMcuClient/nbproject/project.properties: - unmentioned file.reference to apache-xmlrpc-3.1.3-src - download,install that to /usr/local/src - unmentioned
Re: [Asterisk-video] Quest for working MCU software
Hi, Could you get an ethereal trace of the SIP negotiation? Usually that happens when Asterisk/FreePBX does not receive the ACK. Best regards Sergio El 16/12/2011 23:23, ray klassen escribió: Ok I plugged the new info into a trunk on my freepbx install and I set up an outgoing route to it, then I set up a conference on mcuWeb that matches the outgoing did on the route and I get some joy on the mcuWeb console (it registers my incoming userid) but the connection just drops. - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Thursday, 15 December 2011, 17:57 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, Check this: http://www.medooze.com/products/mcu/open-source-installation.aspx#asterisk I have just added the info to the web. BR Sergio El 15/12/2011 21:50, ray klassen escribió: actually the question should be how does it interface with freepbx...? - Original Message - From: ray klassenjulius_ahenobar...@yahoo.co.uk To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Thursday, 15 December 2011, 11:57 Subject: Re: [Asterisk-video] Quest for working MCU software That worked ok. I Followed the media-server instructions it compiled safely and it's running and added to mcuWeb console. Now how does this interface with asterisk? - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: Development discussion of video media support in Asteriskasterisk-video@lists.digium.com Cc: Sent: Wednesday, 14 December 2011, 10:03 Subject: Re: [Asterisk-video] Quest for working MCU software Hi Ray, I will check this errors and get back to you, I usually use Netbeans directly for compiling the mcuWeb application. In the mean time you can try with a binary build of the application (they are very well updated), try this one: http://sourceforge.net/projects/mcumediaserver/files/mcumediaserver/rev%20414/mcuWeb.sar/download Best regards Sergio El 14/12/2011 18:08, ray klassen escribió: The reason i went for the .vmdk fie was that I couldn't get the svn version compiled. But with your help maybe... Ok I'm setting this all out in painstaking detail, because I don't know where I could be off track some of the formatting on http://www.medooze.com/products/mcu/open-source-installation.aspx has masked some steps in the file edits because the first edit shows up outside the should-be convenient code box. -a bit misleading but whatever. also some of the file.properties lines point to stuff the howto doesn't mention. Because the first time I tried this, it error-ed out, I have downloaded and installed those as well. I'm stuck on running ant in the XmlRpcMcuClient directory -- error reports package org.apache.xmlrpc does not exist. But how could that be? Looks like a real noob error. But I've got all the paths I know of right. So here I go posting to the list. Install Log: - Vanilla Debian Squeeze amd64 install no extra packages, just ssh-server - edit /etc/apt/sources.list to include contrib and non-free - apt-get install sun-java6-jdk sun-java6-jre sun-java6-fonts sun-java6-javadb sun-java6-bin ant subversion bzip2 - download sailfin-installer-v2-b31g-linux.jar - install sailfin in /usr/local/sailfin per instructions @ http://sailfin.java.net/downloads/v1-MS4.html -- successful - start mcuWeb install per instructions @ http://www.medooze.com/products/mcu/open-source-installation.aspx - download apache-xmlrpc-3.1.3-bin.tar.bz2 and untar into /usr/local/apache-xmlrpc-3.1.3 - cd /usr/local/src - svn checkout https://mcumediaserver.svn.sourceforge.net/svnroot/mcumediaserver mcu - edit /usr/local/src/mcu/XmlRpcMcuClient/nbproject/project.properties: - unmentioned file.reference to apache-xmlrpc-3.1.3-src - download,install that to /usr/local/src - unmentioned file.reference to ../../usr/xmlrpc-3.0rc1/lib/ws-commons-util-1.0.1.jar -- download from www.findpro.net/en/index.php?action=downloadid=949335 - unmentioned file.reference to xmlrpc-server-3.1.3.jar -- edited to match existing file - re-check all file paths for validity (there is a file there!) file.reference.commons-logging-1.1.jar=/usr/local/lib/apache-xmlrpc-3.1.3/lib/commons-logging-1.1.jar file.reference.src-main=/usr/local/src/apache-xmlrpc-3.1.3-src/client/src/main/ file.reference.ws-commons-util-1.0.1.jar=/usr/local/lib/xmlrpc-3.0rc1/lib/ws-commons-util-1.0.1.jar file.reference.ws-commons-util-1.0.2.jar=/usr/local/lib/apache-xmlrpc-3.1.3/lib/ws-commons-util-1.0.2.jar file.reference.xmlrpc-client-3.1.3.jar==/usr/local/lib/apache-xmlrpc-3.1.3/lib/xmlrpc-client-3.1.3.jar file.reference.xmlrpc-common-3.1.3.jar==/usr/local/lib/apache-xmlrpc-3.1.3/lib/xmlrpc-common-3.1.3.jar file.reference.xmlrpc-server-3.1.3.jar=/usr/local/lib/apache-xmlrpc-3.1.3/lib/xmlrpc-server-3.1.3.jar - edit
Re: [Asterisk-video] Quest for working MCU software
That worked ok. I Followed the media-server instructions it compiled safely and it's running and added to mcuWeb console. Now how does this interface with asterisk? - Original Message - From: Sergio Garcia Murillo sergio.gar...@fontventa.com To: Development discussion of video media support in Asterisk asterisk-video@lists.digium.com Cc: Sent: Wednesday, 14 December 2011, 10:03 Subject: Re: [Asterisk-video] Quest for working MCU software Hi Ray, I will check this errors and get back to you, I usually use Netbeans directly for compiling the mcuWeb application. In the mean time you can try with a binary build of the application (they are very well updated), try this one: http://sourceforge.net/projects/mcumediaserver/files/mcumediaserver/rev%20414/mcuWeb.sar/download Best regards Sergio El 14/12/2011 18:08, ray klassen escribió: The reason i went for the .vmdk fie was that I couldn't get the svn version compiled. But with your help maybe... Ok I'm setting this all out in painstaking detail, because I don't know where I could be off track some of the formatting on http://www.medooze.com/products/mcu/open-source-installation.aspx has masked some steps in the file edits because the first edit shows up outside the should-be convenient code box. -a bit misleading but whatever. also some of the file.properties lines point to stuff the howto doesn't mention. Because the first time I tried this, it error-ed out, I have downloaded and installed those as well. I'm stuck on running ant in the XmlRpcMcuClient directory -- error reports package org.apache.xmlrpc does not exist. But how could that be? Looks like a real noob error. But I've got all the paths I know of right. So here I go posting to the list. Install Log: - Vanilla Debian Squeeze amd64 install no extra packages, just ssh-server - edit /etc/apt/sources.list to include contrib and non-free - apt-get install sun-java6-jdk sun-java6-jre sun-java6-fonts sun-java6-javadb sun-java6-bin ant subversion bzip2 - download sailfin-installer-v2-b31g-linux.jar - install sailfin in /usr/local/sailfin per instructions @ http://sailfin.java.net/downloads/v1-MS4.html -- successful - start mcuWeb install per instructions @ http://www.medooze.com/products/mcu/open-source-installation.aspx - download apache-xmlrpc-3.1.3-bin.tar.bz2 and untar into /usr/local/apache-xmlrpc-3.1.3 - cd /usr/local/src - svn checkout https://mcumediaserver.svn.sourceforge.net/svnroot/mcumediaserver mcu - edit /usr/local/src/mcu/XmlRpcMcuClient/nbproject/project.properties: - unmentioned file.reference to apache-xmlrpc-3.1.3-src - download,install that to /usr/local/src - unmentioned file.reference to ../../usr/xmlrpc-3.0rc1/lib/ws-commons-util-1.0.1.jar -- download from www.findpro.net/en/index.php?action=downloadid=949335 - unmentioned file.reference to xmlrpc-server-3.1.3.jar -- edited to match existing file - re-check all file paths for validity (there is a file there!) file.reference.commons-logging-1.1.jar=/usr/local/lib/apache-xmlrpc-3.1.3/lib/commons-logging-1.1.jar file.reference.src-main=/usr/local/src/apache-xmlrpc-3.1.3-src/client/src/main/ file.reference.ws-commons-util-1.0.1.jar=/usr/local/lib/xmlrpc-3.0rc1/lib/ws-commons-util-1.0.1.jar file.reference.ws-commons-util-1.0.2.jar=/usr/local/lib/apache-xmlrpc-3.1.3/lib/ws-commons-util-1.0.2.jar file.reference.xmlrpc-client-3.1.3.jar==/usr/local/lib/apache-xmlrpc-3.1.3/lib/xmlrpc-client-3.1.3.jar file.reference.xmlrpc-common-3.1.3.jar==/usr/local/lib/apache-xmlrpc-3.1.3/lib/xmlrpc-common-3.1.3.jar file.reference.xmlrpc-server-3.1.3.jar=/usr/local/lib/apache-xmlrpc-3.1.3/lib/xmlrpc-server-3.1.3.jar - edit /usr/local/src/mcu/mcuWeb/nbproject/project.properties: - unmentioned file.reference to jsdp-1.0.jar download install from sourceforge file.reference.commons-logging-1.1.jar=/usr/local/lib/apache-xml-3.1.3/lib/commons-logging-1.1.jar file.reference.jsdp-1.0.jar=/usr/local/lib/jsdp-1.0/jsdp-1.0.jar file.reference.ssa-api.jar=/usr/local/sailfin/lib/ssa-api.jar file.reference.ws-commons-util-1.0.2.jar=/usr/local/lib/apache-xml-3.1.3/lib/ws-commons-util-1.0.2.jar file.reference.xmlrpc-client-3.1.3.jar=/usr/local/lib/apache-xml-3.1.3/lib/xmlrpc-client-3.1.3.jar file.reference.xmlrpc-common-3.1.3.jar=/usr/local/lib/apache-xml-3.1.3/lib/xmlrpc-common-3.1.3.jar file.reference.XmlRpcMcuClient.jar=../XmlRpcMcuClient/dist/XmlRpcMcuClient.jar - re-check all file paths for validity (there is, or will be, a file there!) - cd /usr/local/src/mcu/XmlRpcClient - ant - returns error /usr/local/src/mcu/XmlRpcMcuClient/src/org/murillo/MediaServer/XmlRPCJSR309Client.java:11: package org.apache.xmlrpc does not exist - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Tuesday, 13 December 2011, 10:00
Re: [Asterisk-video] Quest for working MCU software
The reason i went for the .vmdk fie was that I couldn't get the svn version compiled. But with your help maybe... Ok I'm setting this all out in painstaking detail, because I don't know where I could be off track some of the formatting on http://www.medooze.com/products/mcu/open-source-installation.aspx has masked some steps in the file edits because the first edit shows up outside the should-be convenient code box. -a bit misleading but whatever. also some of the file.properties lines point to stuff the howto doesn't mention. Because the first time I tried this, it error-ed out, I have downloaded and installed those as well. I'm stuck on running ant in the XmlRpcMcuClient directory -- error reports package org.apache.xmlrpc does not exist. But how could that be? Looks like a real noob error. But I've got all the paths I know of right. So here I go posting to the list. Install Log: - Vanilla Debian Squeeze amd64 install no extra packages, just ssh-server - edit /etc/apt/sources.list to include contrib and non-free - apt-get install sun-java6-jdk sun-java6-jre sun-java6-fonts sun-java6-javadb sun-java6-bin ant subversion bzip2 - download sailfin-installer-v2-b31g-linux.jar - install sailfin in /usr/local/sailfin per instructions @ http://sailfin.java.net/downloads/v1-MS4.html -- successful - start mcuWeb install per instructions @ http://www.medooze.com/products/mcu/open-source-installation.aspx - download apache-xmlrpc-3.1.3-bin.tar.bz2 and untar into /usr/local/apache-xmlrpc-3.1.3 - cd /usr/local/src - svn checkout https://mcumediaserver.svn.sourceforge.net/svnroot/mcumediaserver mcu - edit /usr/local/src/mcu/XmlRpcMcuClient/nbproject/project.properties: - unmentioned file.reference to apache-xmlrpc-3.1.3-src - download,install that to /usr/local/src - unmentioned file.reference to ../../usr/xmlrpc-3.0rc1/lib/ws-commons-util-1.0.1.jar -- download from www.findpro.net/en/index.php?action=downloadid=949335 - unmentioned file.reference to xmlrpc-server-3.1.3.jar -- edited to match existing file - re-check all file paths for validity (there is a file there!) file.reference.commons-logging-1.1.jar=/usr/local/lib/apache-xmlrpc-3.1.3/lib/commons-logging-1.1.jar file.reference.src-main=/usr/local/src/apache-xmlrpc-3.1.3-src/client/src/main/ file.reference.ws-commons-util-1.0.1.jar=/usr/local/lib/xmlrpc-3.0rc1/lib/ws-commons-util-1.0.1.jar file.reference.ws-commons-util-1.0.2.jar=/usr/local/lib/apache-xmlrpc-3.1.3/lib/ws-commons-util-1.0.2.jar file.reference.xmlrpc-client-3.1.3.jar==/usr/local/lib/apache-xmlrpc-3.1.3/lib/xmlrpc-client-3.1.3.jar file.reference.xmlrpc-common-3.1.3.jar==/usr/local/lib/apache-xmlrpc-3.1.3/lib/xmlrpc-common-3.1.3.jar file.reference.xmlrpc-server-3.1.3.jar=/usr/local/lib/apache-xmlrpc-3.1.3/lib/xmlrpc-server-3.1.3.jar - edit /usr/local/src/mcu/mcuWeb/nbproject/project.properties: - unmentioned file.reference to jsdp-1.0.jar download install from sourceforge file.reference.commons-logging-1.1.jar=/usr/local/lib/apache-xml-3.1.3/lib/commons-logging-1.1.jar file.reference.jsdp-1.0.jar=/usr/local/lib/jsdp-1.0/jsdp-1.0.jar file.reference.ssa-api.jar=/usr/local/sailfin/lib/ssa-api.jar file.reference.ws-commons-util-1.0.2.jar=/usr/local/lib/apache-xml-3.1.3/lib/ws-commons-util-1.0.2.jar file.reference.xmlrpc-client-3.1.3.jar=/usr/local/lib/apache-xml-3.1.3/lib/xmlrpc-client-3.1.3.jar file.reference.xmlrpc-common-3.1.3.jar=/usr/local/lib/apache-xml-3.1.3/lib/xmlrpc-common-3.1.3.jar file.reference.XmlRpcMcuClient.jar=../XmlRpcMcuClient/dist/XmlRpcMcuClient.jar - re-check all file paths for validity (there is, or will be, a file there!) - cd /usr/local/src/mcu/XmlRpcClient - ant - returns error /usr/local/src/mcu/XmlRpcMcuClient/src/org/murillo/MediaServer/XmlRPCJSR309Client.java:11: package org.apache.xmlrpc does not exist - Original Message - From: Sergio Garcia Murillo sergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Tuesday, 13 December 2011, 10:00 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, have you tried to ask for help in any of those projects? ;) What issues have you found with mcuWeb, maybe I could help you setting it up. Best regards Sergio El 13/12/2011 18:03, ray klassen escribió: What are people using for open source MCU's? I've tried vmukti, but it gives me a 'trust not granted' error. I've tried mcuWeb but it produces some java exception. I've tried openvcs, which has allowed me to connect to it but gives me an error I can't find on the web from the grandstream video phone I use for testing... -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-video mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-video
Re: [Asterisk-video] Quest for working MCU software
Hi Ray, I will check this errors and get back to you, I usually use Netbeans directly for compiling the mcuWeb application. In the mean time you can try with a binary build of the application (they are very well updated), try this one: http://sourceforge.net/projects/mcumediaserver/files/mcumediaserver/rev%20414/mcuWeb.sar/download Best regards Sergio El 14/12/2011 18:08, ray klassen escribió: The reason i went for the .vmdk fie was that I couldn't get the svn version compiled. But with your help maybe... Ok I'm setting this all out in painstaking detail, because I don't know where I could be off track some of the formatting on http://www.medooze.com/products/mcu/open-source-installation.aspx has masked some steps in the file edits because the first edit shows up outside the should-be convenient code box. -a bit misleading but whatever. also some of the file.properties lines point to stuff the howto doesn't mention. Because the first time I tried this, it error-ed out, I have downloaded and installed those as well. I'm stuck on running ant in the XmlRpcMcuClient directory -- error reports package org.apache.xmlrpc does not exist. But how could that be? Looks like a real noob error. But I've got all the paths I know of right. So here I go posting to the list. Install Log: - Vanilla Debian Squeeze amd64 install no extra packages, just ssh-server - edit /etc/apt/sources.list to include contrib and non-free - apt-get install sun-java6-jdk sun-java6-jre sun-java6-fonts sun-java6-javadb sun-java6-bin ant subversion bzip2 - download sailfin-installer-v2-b31g-linux.jar - install sailfin in /usr/local/sailfin per instructions @ http://sailfin.java.net/downloads/v1-MS4.html -- successful - start mcuWeb install per instructions @ http://www.medooze.com/products/mcu/open-source-installation.aspx - download apache-xmlrpc-3.1.3-bin.tar.bz2 and untar into /usr/local/apache-xmlrpc-3.1.3 - cd /usr/local/src - svn checkout https://mcumediaserver.svn.sourceforge.net/svnroot/mcumediaserver mcu - edit /usr/local/src/mcu/XmlRpcMcuClient/nbproject/project.properties: - unmentioned file.reference to apache-xmlrpc-3.1.3-src - download,install that to /usr/local/src - unmentioned file.reference to ../../usr/xmlrpc-3.0rc1/lib/ws-commons-util-1.0.1.jar -- download from www.findpro.net/en/index.php?action=downloadid=949335 - unmentioned file.reference to xmlrpc-server-3.1.3.jar -- edited to match existing file - re-check all file paths for validity (there is a file there!) file.reference.commons-logging-1.1.jar=/usr/local/lib/apache-xmlrpc-3.1.3/lib/commons-logging-1.1.jar file.reference.src-main=/usr/local/src/apache-xmlrpc-3.1.3-src/client/src/main/ file.reference.ws-commons-util-1.0.1.jar=/usr/local/lib/xmlrpc-3.0rc1/lib/ws-commons-util-1.0.1.jar file.reference.ws-commons-util-1.0.2.jar=/usr/local/lib/apache-xmlrpc-3.1.3/lib/ws-commons-util-1.0.2.jar file.reference.xmlrpc-client-3.1.3.jar==/usr/local/lib/apache-xmlrpc-3.1.3/lib/xmlrpc-client-3.1.3.jar file.reference.xmlrpc-common-3.1.3.jar==/usr/local/lib/apache-xmlrpc-3.1.3/lib/xmlrpc-common-3.1.3.jar file.reference.xmlrpc-server-3.1.3.jar=/usr/local/lib/apache-xmlrpc-3.1.3/lib/xmlrpc-server-3.1.3.jar - edit /usr/local/src/mcu/mcuWeb/nbproject/project.properties: - unmentioned file.reference to jsdp-1.0.jar download install from sourceforge file.reference.commons-logging-1.1.jar=/usr/local/lib/apache-xml-3.1.3/lib/commons-logging-1.1.jar file.reference.jsdp-1.0.jar=/usr/local/lib/jsdp-1.0/jsdp-1.0.jar file.reference.ssa-api.jar=/usr/local/sailfin/lib/ssa-api.jar file.reference.ws-commons-util-1.0.2.jar=/usr/local/lib/apache-xml-3.1.3/lib/ws-commons-util-1.0.2.jar file.reference.xmlrpc-client-3.1.3.jar=/usr/local/lib/apache-xml-3.1.3/lib/xmlrpc-client-3.1.3.jar file.reference.xmlrpc-common-3.1.3.jar=/usr/local/lib/apache-xml-3.1.3/lib/xmlrpc-common-3.1.3.jar file.reference.XmlRpcMcuClient.jar=../XmlRpcMcuClient/dist/XmlRpcMcuClient.jar - re-check all file paths for validity (there is, or will be, a file there!) - cd /usr/local/src/mcu/XmlRpcClient - ant - returns error /usr/local/src/mcu/XmlRpcMcuClient/src/org/murillo/MediaServer/XmlRPCJSR309Client.java:11: package org.apache.xmlrpc does not exist - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Tuesday, 13 December 2011, 10:00 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, have you tried to ask for help in any of those projects? ;) What issues have you found with mcuWeb, maybe I could help you setting it up. Best regards Sergio El 13/12/2011 18:03, ray klassen escribió: What are people using for open source MCU's? I've tried vmukti, but it gives me a 'trust not granted' error. I've tried mcuWeb but it produces some java exception. I've tried openvcs, which has allowed me to connect to it but gives me an error I
Re: [Asterisk-video] Quest for working MCU software
Hi, have you tried to ask for help in any of those projects? ;) What issues have you found with mcuWeb, maybe I could help you setting it up. Best regards Sergio El 13/12/2011 18:03, ray klassen escribió: What are people using for open source MCU's? I've tried vmukti, but it gives me a 'trust not granted' error. I've tried mcuWeb but it produces some java exception. I've tried openvcs, which has allowed me to connect to it but gives me an error I can't find on the web from the grandstream video phone I use for testing... -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-video mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-video -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-video mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-video
Re: [Asterisk-video] Quest for working MCU software
I'm using the vmware vmdk guest disk, converted to raw for kvm When I try to create a conference I get this: The server encountered an internal error () that prevented it from fulfilling this request. Server log says this. [#|2011-12-13T23:30:14.477+0100|SEVERE|sun-glassfish-comms-server2.0|javax.enterprise.system.container.web|_ThreadID=19;_ThreadName=httpWorkerThread-80-4;_RequestID=2dd87ab2-7a26-4e69-bd23-5f1d677625a4;|StandardWrapperValve[MCUHttpServlet]: PWC1406: Servlet.service() for servlet MCUHttpServlet threw exception java.lang.NullPointerException at org.murillo.mcuWeb.MCUHttpServlet.doPost(MCUHttpServlet.java:121) at javax.servlet.http.HttpServlet.service(HttpServlet.java:754) at javax.servlet.http.HttpServlet.service(HttpServlet.java:847) at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:427) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:315) at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:287) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:218) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593) at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94) at com.sun.enterprise.web.PESessionLockingStandardPipeline.invoke(PESessionLockingStandardPipeline.java:98) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:222) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1093) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:166) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1093) at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:291) at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:666) at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:597) at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:872) at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341) at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263) at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214) at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:264) at com.sun.enterprise.web.connector.grizzly.WorkerThreadImpl.run(WorkerThreadImpl.java:117) |#] - Original Message - From: Sergio Garcia Murillo sergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Tuesday, 13 December 2011, 10:00 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, have you tried to ask for help in any of those projects? ;) What issues have you found with mcuWeb, maybe I could help you setting it up. Best regards Sergio El 13/12/2011 18:03, ray klassen escribió: What are people using for open source MCU's? I've tried vmukti, but it gives me a 'trust not granted' error. I've tried mcuWeb but it produces some java exception. I've tried openvcs, which has allowed me to connect to it but gives me an error I can't find on the web from the grandstream video phone I use for testing... -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-video mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-video -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-video mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-video -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-video mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-video
Re: [Asterisk-video] Quest for working MCU software
Hi Ray, The vmware image is quite old and a bit outdated. I would recommend you to upgrade to the latest version. You can get the installation instructions from the mcuWeb and the media mixer here: http://www.medooze.com/products/mcu/open-source-installation.aspx http://www.medooze.com/products/media-mixer-server/installation.aspx If you find any problems, just contact me. Best regards Sergio El 13/12/2011 23:36, ray klassen escribió: I'm using the vmware vmdk guest disk, converted to raw for kvm When I try to create a conference I get this: The server encountered an internal error () that prevented it from fulfilling this request. Server log says this. [#|2011-12-13T23:30:14.477+0100|SEVERE|sun-glassfish-comms-server2.0|javax.enterprise.system.container.web|_ThreadID=19;_ThreadName=httpWorkerThread-80-4;_RequestID=2dd87ab2-7a26-4e69-bd23-5f1d677625a4;|StandardWrapperValve[MCUHttpServlet]: PWC1406: Servlet.service() for servlet MCUHttpServlet threw exception java.lang.NullPointerException at org.murillo.mcuWeb.MCUHttpServlet.doPost(MCUHttpServlet.java:121) at javax.servlet.http.HttpServlet.service(HttpServlet.java:754) at javax.servlet.http.HttpServlet.service(HttpServlet.java:847) at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:427) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:315) at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:287) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:218) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593) at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94) at com.sun.enterprise.web.PESessionLockingStandardPipeline.invoke(PESessionLockingStandardPipeline.java:98) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:222) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1093) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:166) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1093) at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:291) at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:666) at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:597) at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:872) at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341) at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263) at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214) at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:264) at com.sun.enterprise.web.connector.grizzly.WorkerThreadImpl.run(WorkerThreadImpl.java:117) |#] - Original Message - From: Sergio Garcia Murillosergio.gar...@fontventa.com To: asterisk-video@lists.digium.com Cc: Sent: Tuesday, 13 December 2011, 10:00 Subject: Re: [Asterisk-video] Quest for working MCU software Hi, have you tried to ask for help in any of those projects? ;) What issues have you found with mcuWeb, maybe I could help you setting it up. Best regards Sergio El 13/12/2011 18:03, ray klassen escribió: What are people using for open source MCU's? I've tried vmukti, but it gives me a 'trust not granted' error. I've tried mcuWeb but it produces some java exception. I've tried openvcs, which has allowed me to connect to it but gives me an error I can't find on the web from the grandstream video phone I use for testing... -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-video mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-video -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-video mailing list To UNSUBSCRIBE or update options