[AsteriskBrasil] RES: RES: RES: RES: RES: Problemas com DialPlan
Pois é Felipe. Fiz assim e não tem cristo... um fato que não comentei é que a ligação não está nem chegando na operadora... de inicio eu pensei que fosse a operadora, porem entrei em contato com o técnico lá que consegue escutar as ligações do lado deles e ele falou que nem tinha chegado la a ligação. Eu acredito que seja pelo erro no log (abaixo) == No one is available to answer at this time (1:0/0/0) Porem não consegui descobrir porque ele só aceita quando tem 014XX e o mais interessante é que se disco 01455, 01411 tb não funciona acontecendo o mesmo erro. Alguém já passou por algo parecido? Att João -Mensagem original- De: asteriskbrasil-bounces em listas.asteriskbrasil.org [mailto:asteriskbrasil-bounces em listas.asteriskbrasil.org] Em nome de Felipe Silva Enviada em: domingo, 5 de março de 2006 09:47 Para: asteriskbrasil em listas.asteriskbrasil.org Assunto: [AsteriskBrasil] RES: RES: RES: RES: Problemas com DialPlan Ola amigo ! A config da rota para a ZAP do meu AMP esta assim: http://www.geocities.com/frps Abraços Felipe Rafael -Mensagem original- De: asteriskbrasil-bounces em listas.asteriskbrasil.org [mailto:asteriskbrasil-bounces em listas.asteriskbrasil.org] Em nome de Lucio Gonzalez Enviada em: domingo, 5 de março de 2006 08:12 Para: asteriskbrasil em listas.asteriskbrasil.org Assunto: Re: [AsteriskBrasil] RES: RES: RES: Problemas com DialPlan Eu fiz uma Rota pelo AMP com X para minha ZAP e as ligações discando 0145432781664 por exemplo funciona OK. Aqui a Tua rrota tem que ser exten = _0XXNXXX Porem queria fazer ligações locais direto exemplo 32781664 sem o 01454. Tentei adiciona uma rota mas não adianta. Aqui exten = _NXXX Como teria que fazer meu plano de discagem? O Log quando disco direto 32781664. 36;40mPlayback(SIP/9600-a4cb, pls-try-call-later) in new stack -- Playing 'pls-try-call-later' (language 'en') Verbosity is at least 3 -- Executing Macro(SIP/9600-a4cb, hangupcall) in new stack -- Executing ResetCDR(SIP/9600-a4cb, w) in new stack -- Executing NoCDR(SIP/9600-a4cb, ) in new stack -- Executing Wait(SIP/9600-a4cb, 5) in new stack == Spawn extension (macro-hangupcall, s, 3) exited non-zero on 'SIP/9600-a4cb' in macro 'hangupcall' == Spawn extension (macro-outisbusy, s, 3) exited non-zero on 'SIP/9600-a4cb' in macro 'outisbusy' == Spawn extension (from-internal, 32781664, 2) exited non-zero on 'SIP/9600-a4cb' -- Executing Macro(SIP/9600-a4cb, hangupcall) in new stack -- Executing ResetCDR(SIP/9600-a4cb, w) in new stack -- Executing NoCDR(SIP/9600-a4cb, ) in new stack -- Executing Wait(SIP/9600-a4cb, 5) in new stack == Spawn extension (macro-hangupcall, s, 3) exited non-zero on 'SIP/9600-a4cb' in macro 'hangupcall' == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/9600-a4cb' asterisk1*CLI [root em asterisk1 asterisk]# asterisk -r Asterisk 1.2.2, Copyright (C) 1999 - 2006 Digium, Inc. and others. Created by Mark Spencer markster em digium.com Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'show license' for details. = Connected to Asterisk 1.2.2 currently running on asterisk1 (pid = 2758) Verbosity is at least 3 -- Executing Macro(SIP/9600-9b32, dialout-trunk|1|32781664|) in new stack -- Executing GotoIf(SIP/9600-9b32, 1?3:2)) in new stack -- Goto (macro-dialout-trunk,s,3) -- Executing Macro(SIP/9600-9b32, user-callerid) in new stack -- Executing DBget(SIP/9600-9b32, AMPUSER=DEVICE/9600/user) in new stack -- DBget: varname=AMPUSER, family=DEVICE, key=9600/user -- DBget: set variable AMPUSER to 9600 -- Executing DBget(SIP/9600-9b32, AMPUSERCIDNAME=AMPUSER/9600/cidname) in new stack -- DBget: varname=AMPUSERCIDNAME, family=AMPUSER, key=9600/cidname -- DBget: set variable AMPUSERCIDNAME to PDH -- Executing GotoIf(SIP/9600-9b32, 0?5) in new stack -- Executing SetCallerID(SIP/9600-9b32, PDH 9600) in new stack -- Executing NoOp(SIP/9600-9b32, Using CallerID PDH 9600) in new stack -- Executing Macro(SIP/9600-9b32, record-enable|9600|OUT) in new stack -- Executing GotoIf(SIP/9600-9b32, 0 0?2:4) in new stack -- Goto (macro-record-enable,s,4) -- Executing AGI(SIP/9600-9b32, recordingcheck|20060303-133454|1141410894.22) in new stack -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck recordingcheck|20060303-133454|1141410894.22: Outbound recording not enabled -- AGI Script recordingcheck completed, returning 0 -- Executing NoOp(SIP/9600-9b32, No recording needed) in new stack -- Executing Macro(SIP/9600-9b32, outbound-callerid|1) in new stack -- Executing DBget(SIP/9600-9b32, USEROUTCID=AMPUSER/9600/outboundcid) in new stack -- DBget: varname=USEROUTCID, family=AMPUSER, key=9600/outboundcid -- DBget: set variable USEROUTCID to
[AsteriskBrasil] RES: RES: RES: RES: RES: Problemas com DialPlan
Comigo vai da forma que eu coloquei no screenshot -Mensagem original- De: asteriskbrasil-bounces em listas.asteriskbrasil.org [mailto:asteriskbrasil-bounces em listas.asteriskbrasil.org] Em nome de Lucio Gonzalez Enviada em: domingo, 5 de março de 2006 22:31 Para: asteriskbrasil em listas.asteriskbrasil.org Assunto: Re: [AsteriskBrasil] RES: RES: RES: RES: Problemas com DialPlan desculpa falta a operadora tenta colocar assim _X.;isto para local _0X. ;isto para ddd - Original Message - From: Lucio Gonzalez [EMAIL PROTECTED] To: asteriskbrasil em listas.asteriskbrasil.org Sent: Sunday, March 05, 2006 9:32 PM Subject: Re: [AsteriskBrasil] RES: RES: RES: RES: Problemas com DialPlan ta certo so falta 0XXNXXX coloca la isso e já vai funca - Original Message - From: Felipe Silva [EMAIL PROTECTED] To: asteriskbrasil em listas.asteriskbrasil.org Sent: Sunday, March 05, 2006 9:47 AM Subject: [AsteriskBrasil] RES: RES: RES: RES: Problemas com DialPlan Ola amigo ! A config da rota para a ZAP do meu AMP esta assim: http://www.geocities.com/frps Abraços Felipe Rafael -Mensagem original- De: asteriskbrasil-bounces em listas.asteriskbrasil.org [mailto:asteriskbrasil-bounces em listas.asteriskbrasil.org] Em nome de Lucio Gonzalez Enviada em: domingo, 5 de março de 2006 08:12 Para: asteriskbrasil em listas.asteriskbrasil.org Assunto: Re: [AsteriskBrasil] RES: RES: RES: Problemas com DialPlan Eu fiz uma Rota pelo AMP com X para minha ZAP e as ligações discando 0145432781664 por exemplo funciona OK. Aqui a Tua rrota tem que ser exten = _0XXNXXX Porem queria fazer ligações locais direto exemplo 32781664 sem o 01454. Tentei adiciona uma rota mas não adianta. Aqui exten = _NXXX Como teria que fazer meu plano de discagem? O Log quando disco direto 32781664. 36;40mPlayback(SIP/9600-a4cb, pls-try-call-later) in new stack -- Playing 'pls-try-call-later' (language 'en') Verbosity is at least 3 -- Executing Macro(SIP/9600-a4cb, hangupcall) in new stack -- Executing ResetCDR(SIP/9600-a4cb, w) in new stack -- Executing NoCDR(SIP/9600-a4cb, ) in new stack -- Executing Wait(SIP/9600-a4cb, 5) in new stack == Spawn extension (macro-hangupcall, s, 3) exited non-zero on 'SIP/9600-a4cb' in macro 'hangupcall' == Spawn extension (macro-outisbusy, s, 3) exited non-zero on 'SIP/9600-a4cb' in macro 'outisbusy' == Spawn extension (from-internal, 32781664, 2) exited non-zero on 'SIP/9600-a4cb' -- Executing Macro(SIP/9600-a4cb, hangupcall) in new stack -- Executing ResetCDR(SIP/9600-a4cb, w) in new stack -- Executing NoCDR(SIP/9600-a4cb, ) in new stack -- Executing Wait(SIP/9600-a4cb, 5) in new stack == Spawn extension (macro-hangupcall, s, 3) exited non-zero on 'SIP/9600-a4cb' in macro 'hangupcall' == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/9600-a4cb' asterisk1*CLI [root em asterisk1 asterisk]# asterisk -r Asterisk 1.2.2, Copyright (C) 1999 - 2006 Digium, Inc. and others. Created by Mark Spencer markster em digium.com Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'show license' for details. = Connected to Asterisk 1.2.2 currently running on asterisk1 (pid = 2758) Verbosity is at least 3 -- Executing Macro(SIP/9600-9b32, dialout-trunk|1|32781664|) in new stack -- Executing GotoIf(SIP/9600-9b32, 1?3:2)) in new stack -- Goto (macro-dialout-trunk,s,3) -- Executing Macro(SIP/9600-9b32, user-callerid) in new stack -- Executing DBget(SIP/9600-9b32, AMPUSER=DEVICE/9600/user) in new stack -- DBget: varname=AMPUSER, family=DEVICE, key=9600/user -- DBget: set variable AMPUSER to 9600 -- Executing DBget(SIP/9600-9b32, AMPUSERCIDNAME=AMPUSER/9600/cidname) in new stack -- DBget: varname=AMPUSERCIDNAME, family=AMPUSER, key=9600/cidname -- DBget: set variable AMPUSERCIDNAME to PDH -- Executing GotoIf(SIP/9600-9b32, 0?5) in new stack -- Executing SetCallerID(SIP/9600-9b32, PDH 9600) in new stack -- Executing NoOp(SIP/9600-9b32, Using CallerID PDH 9600) in new stack -- Executing Macro(SIP/9600-9b32, record-enable|9600|OUT) in new stack -- Executing GotoIf(SIP/9600-9b32, 0 0?2:4) in new stack -- Goto (macro-record-enable,s,4) -- Executing AGI(SIP/9600-9b32, recordingcheck|20060303-133454|1141410894.22) in new stack -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck recordingcheck|20060303-133454|1141410894.22: Outbound recording not enabled -- AGI Script recordingcheck completed, returning 0 -- Executing NoOp(SIP/9600-9b32, No recording needed) in new stack -- Executing Macro(SIP/9600-9b32, outbound-callerid|1) in new stack -- Executing DBget(SIP/9600-9b32, USEROUTCID=AMPUSER/9600/outboundcid) in new stack -- DBget: varname=USEROUTCID, family=AMPUSER,