Re: [Asteriskbrasil-biz] Integração Siemens Hipath 3800 via E1 / ISDN. | Suporte Pago!
Boa tarde Jefferson, Integramos vrios PABX legado, Siemens, Avaya, NEC entre outros, se precisar de auxilio pode me contactar. Em 08/02/2012 20:31, Jefferson Carvalho escreveu: Ol Lista, Estou necessitando de suporte (pago) para integrao do Asterisk com uma central siemens (hipath 3800) via E1 (ISDN). J fiz vrias tentativas com diversos protocolos (EuroISDN , QSIG_etc.) e no obtive sucesso. A conexo com a siemens usando um cabo cross RJ48C - BNC15 (male) ; Inicialmente eu usei uma placa da digium (te420 / pcie) e depois mudei para uma sangoma A104d ; com a digium , sempre existia o alarme yellow j com a sangoma o alarme no era apresentado , embora o protocolo sempre seja down. A tima configurao de sinalizao que ficou na siemens foi (S2M : Linha direta de rede europp) tambem tentei , S0 , ECMA Q.SIG e por a vai... Estou sinalizando como master e a siemens como slave , j tentei o inverso tambm. Seguem algumas informaes para debug: pri set debug on span 1 Enabled debugging on span 1 TEI=0 Sending SABME TEI=0 Sending SABME TEI=0 Sending SABME TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in state 5(Awaiting establishment) Changing from state 5(Awaiting establishment) to 4(TEI assigned) TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3) SAPI/TEI=0/0 Kick starting link TEI=0 Sending SABME Changing from state 4(TEI assigned) to 5(Awaiting establishment) TEI=0 Sending SABME ** pri show spans PRI span 1/0: Provisioned, Down, Active ** cat /proc/dahdi/1 Span 1: WPE1/0 "wanpipe1 card 0" (MASTER) HDB3/CCS 1 WPE1/0/1 Clear (In use) (EC: MG2 - INACTIVE) 2 WPE1/0/2 Clear (In use) (EC: MG2 - INACTIVE) 3 WPE1/0/3 Clear (In use) (EC: MG2 - INACTIVE) 4 WPE1/0/4 Clear (In use) (EC: MG2 - INACTIVE) 5 WPE1/0/5 Clear (In use) (EC: MG2 - INACTIVE) 6 WPE1/0/6 Clear (In use) (EC: MG2 - INACTIVE) 7 WPE1/0/7 Clear (In use) (EC: MG2 - INACTIVE) 8 WPE1/0/8 Clear (In use) (EC: MG2 - INACTIVE) 9 WPE1/0/9 Clear (In use) (EC: MG2 - INACTIVE) 10 WPE1/0/10 Clear (In use) (EC: MG2 - INACTIVE) 11 WPE1/0/11 Clear (In use) (EC: MG2 - INACTIVE) 12 WPE1/0/12 Clear (In use) (EC: MG2 - INACTIVE) 13 WPE1/0/13 Clear (In use) (EC: MG2 - INACTIVE) 14 WPE1/0/14 Clear (In use) (EC: MG2 - INACTIVE) 15 WPE1/0/15 Clear (In use) (EC: MG2 - INACTIVE) 16 WPE1/0/16 Hardware-assisted HDLC (In use) 17 WPE1/0/17 Clear (In use) (EC: MG2 - INACTIVE) 18 WPE1/0/18 Clear (In use) (EC: MG2 - INACTIVE) 19 WPE1/0/19 Clear (In use) (EC: MG2 - INACTIVE) 20 WPE1/0/20 Clear (In use) (EC: MG2 - INACTIVE) 21 WPE1/0/21 Clear (In use) (EC: MG2 - INACTIVE) 22 WPE1/0/22 Clear (In use) (EC: MG2 - INACTIVE) 23 WPE1/0/23 Clear (In use) (EC: MG2 - INACTIVE) 24 WPE1/0/24 Clear (In use) (EC: MG2 - INACTIVE) 25 WPE1/0/25 Clear (In use) (EC: MG2 - INACTIVE) 26 WPE1/0/26 Clear (In use) (EC: MG2 - INACTIVE) 27 WPE1/0/27 Clear (In use) (EC: MG2 - INACTIVE) 28 WPE1/0/28 Clear (In use) (EC: MG2 - INACTIVE) 29 WPE1/0/29 Clear (In use) (EC: MG2 - INACTIVE) 30 WPE1/0/30 Clear (In use) (EC: MG2 - INACTIVE) 31 WPE1/0/31 Clear (In use) (EC: MG2 - INACTIVE) *** cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0:9035563 12707 13643 12688IO-APIC-edge timer 1: 1362 1410 1 17IO-APIC-edge i8042 8: 2 1 0 0IO-APIC-edge rtc 9: 0 0 0 0 IO-APIC-level acpi 12: 0 0 2 2IO-APIC-edge i8042 82: 28 0 0 14193 PCI-MSI eth0 177: 1893 29299023337 2931 IO-APIC-level ehci_hcd:usb1, wanpipe1 217: 9 9 8 5 IO-APIC-level ehci_hcd:usb2 225: 1457 1389 20117 20129 IO-APIC-level ata_piix, ata_piix NMI: 0 0 0 0 LOC:9073670907367890736889073687 ERR: 0 MIS: 0 *** #Sangoma A104 port 1 [slot:4 bus:3 span:1] wanpipe1 span=1,1,0,ccs,hdb3 bchan=1-15,17-31 echocanceller=mg2,1-15,17-31 hardhdlc=16 Caso alguem tenha interesse do suporte pago e j tenha experincia nesse tipo de integrao, aguardo contato em privado. -Jefferson Carvalho CEO IP Carrier Telecom INC. 111 NE 1st ST - 3rd Floor Miami-FL 33132 Ph. +1.305-5375390 (direct) Mob. +55.86-9951 Skype: jeffpcarvalho MSN: j...@carvalho.me ___ VoIPMania Store: Seu Shopping VoIP na Internet - Melhores preos e melhores produtos - Somos especializados em VoIP. - Entregamos para todo o Brasil. - Acesse agora: www.voipmania.com.br
Re: [Asteriskbrasil-biz] Integração Siemens Hipath 3800 via E1 / ISDN. | Suporte Pago!
Errata: RJ48C - DB15 (male) - Mensagem original - De: Jefferson Carvalho j...@ipcarrier.us Para: asteriskbrasil-biz@listas.asteriskbrasil.org Enviadas: Quarta-feira, 8 de Fevereiro de 2012 19:31:31 Assunto: [Asteriskbrasil-biz] Integração Siemens Hipath 3800 via E1 / ISDN. | Suporte Pago! Olá Lista, Estou necessitando de suporte (pago) para integração do Asterisk com uma central siemens (hipath 3800) via E1 (ISDN). Já fiz várias tentativas com diversos protocolos (EuroISDN , QSIG_etc.) e não obtive sucesso. A conexão com a siemens é usando um cabo cross RJ48C - BNC15 (male) ; Inicialmente eu usei uma placa da digium (te420 / pcie) e depois mudei para uma sangoma A104d ; com a digium , sempre existia o alarme yellow já com a sangoma o alarme não era apresentado , embora o protocolo sempre seja down. A útima configuração de sinalização que ficou na siemens foi (S2M : Linha direta de rede europp) tambem tentei , S0 , ECMA Q.SIG e por aí vai... Estou sinalizando como master e a siemens como slave , já tentei o inverso também. Seguem algumas informações para debug: pri set debug on span 1 Enabled debugging on span 1 TEI=0 Sending SABME TEI=0 Sending SABME TEI=0 Sending SABME TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in state 5(Awaiting establishment) Changing from state 5(Awaiting establishment) to 4(TEI assigned) TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3) SAPI/TEI=0/0 Kick starting link TEI=0 Sending SABME Changing from state 4(TEI assigned) to 5(Awaiting establishment) TEI=0 Sending SABME ** pri show spans PRI span 1/0: Provisioned, Down, Active ** cat /proc/dahdi/1 Span 1: WPE1/0 wanpipe1 card 0 (MASTER) HDB3/CCS 1 WPE1/0/1 Clear (In use) (EC: MG2 - INACTIVE) 2 WPE1/0/2 Clear (In use) (EC: MG2 - INACTIVE) 3 WPE1/0/3 Clear (In use) (EC: MG2 - INACTIVE) 4 WPE1/0/4 Clear (In use) (EC: MG2 - INACTIVE) 5 WPE1/0/5 Clear (In use) (EC: MG2 - INACTIVE) 6 WPE1/0/6 Clear (In use) (EC: MG2 - INACTIVE) 7 WPE1/0/7 Clear (In use) (EC: MG2 - INACTIVE) 8 WPE1/0/8 Clear (In use) (EC: MG2 - INACTIVE) 9 WPE1/0/9 Clear (In use) (EC: MG2 - INACTIVE) 10 WPE1/0/10 Clear (In use) (EC: MG2 - INACTIVE) 11 WPE1/0/11 Clear (In use) (EC: MG2 - INACTIVE) 12 WPE1/0/12 Clear (In use) (EC: MG2 - INACTIVE) 13 WPE1/0/13 Clear (In use) (EC: MG2 - INACTIVE) 14 WPE1/0/14 Clear (In use) (EC: MG2 - INACTIVE) 15 WPE1/0/15 Clear (In use) (EC: MG2 - INACTIVE) 16 WPE1/0/16 Hardware-assisted HDLC (In use) 17 WPE1/0/17 Clear (In use) (EC: MG2 - INACTIVE) 18 WPE1/0/18 Clear (In use) (EC: MG2 - INACTIVE) 19 WPE1/0/19 Clear (In use) (EC: MG2 - INACTIVE) 20 WPE1/0/20 Clear (In use) (EC: MG2 - INACTIVE) 21 WPE1/0/21 Clear (In use) (EC: MG2 - INACTIVE) 22 WPE1/0/22 Clear (In use) (EC: MG2 - INACTIVE) 23 WPE1/0/23 Clear (In use) (EC: MG2 - INACTIVE) 24 WPE1/0/24 Clear (In use) (EC: MG2 - INACTIVE) 25 WPE1/0/25 Clear (In use) (EC: MG2 - INACTIVE) 26 WPE1/0/26 Clear (In use) (EC: MG2 - INACTIVE) 27 WPE1/0/27 Clear (In use) (EC: MG2 - INACTIVE) 28 WPE1/0/28 Clear (In use) (EC: MG2 - INACTIVE) 29 WPE1/0/29 Clear (In use) (EC: MG2 - INACTIVE) 30 WPE1/0/30 Clear (In use) (EC: MG2 - INACTIVE) 31 WPE1/0/31 Clear (In use) (EC: MG2 - INACTIVE) *** cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0:9035563 12707 13643 12688IO-APIC-edge timer 1: 1362 1410 1 17IO-APIC-edge i8042 8: 2 1 0 0IO-APIC-edge rtc 9: 0 0 0 0 IO-APIC-level acpi 12: 0 0 2 2IO-APIC-edge i8042 82: 28 0 0 14193 PCI-MSI eth0 177: 1893 29299023337 2931 IO-APIC-level ehci_hcd:usb1, wanpipe1 217: 9 9 8 5 IO-APIC-level ehci_hcd:usb2 225: 1457 1389 20117 20129 IO-APIC-level ata_piix, ata_piix NMI: 0 0 0 0 LOC:9073670907367890736889073687 ERR: 0 MIS: 0 *** #Sangoma A104 port 1 [slot:4 bus:3 span:1] wanpipe1 span=1,1,0,ccs,hdb3 bchan=1-15,17-31 echocanceller=mg2,1-15,17-31 hardhdlc=16 Caso alguem tenha interesse do suporte pago e já tenha experiência nesse tipo de integração, aguardo contato em privado. -Jefferson Carvalho CEO IP Carrier Telecom INC. 111 NE 1st ST - 3rd Floor Miami-FL 33132 Ph. +1.305-5375390 (direct) Mob. +55.86-9951 Skype: jeffpcarvalho MSN: j...@carvalho.me ___ VoIPMania Store: Seu Shopping VoIP na Internet - Melhores preços e melhores produtos - Somos
