Re: [Astlinux-users] ALIX2c3 capacity
I'm looking forward to setting up AstLinux on a Alix2c3 myself. Unfortunately the board that I received had dead ethernet ports so it has gone back for exchange and the replacement has not arrived yet. I similarly will use this as SIP uLaw only device, but I will hook in a SPA3000 for access to an analog POTS line. I've had very poor experience with echo using this device however... does anyone have a better suggestion for hooking in just a single analog line to the Alix2c3 -- that doesn't cost an arm and a leg (like the only mini-PCI solution I found). Thanks, David On Fri, Jun 6, 2008 at 6:25 PM, Darrick Hartman (lists) < [EMAIL PROTECTED]> wrote: > > Sure. Almost all of the zaptel hardware is supported. Specifically, > Digium, Rhino and Sangoma. There is support for Pika Technology > hardware, but there are some changes required to get it to compile > properly. There are a few odd-ball pieces of hardware from OpenVox > which would require some patching to work, but it's all possible in > Astlinux. > > I have several net5501's with the 8 port Rhino cards (and one install > with the 24 port card, (7 FXO lines and 3 FXS). The 24 port card won't > fit in the case, but the 8 port cards fit perfectly. > > Darrick > > George Masgras wrote: > > no transcoding, ulaw end to end, SIP only. So you have a zaptel card > > hooked up to the soekris board? that is awesome, didn't know you could > > do it with that board and astlinux. > > > > On Fri, Jun 6, 2008 at 6:10 PM, Darrick Hartman (lists) > > <[EMAIL PROTECTED]> wrote: > >> George Masgras wrote: > >>> Does anyone have an idea how many SIP phones/active calls/registration > >>> requests(every 120 sec) an ALIX2c3 with a 1GB card can handle ? This > >>> would be in PBX only mode. The max I've tried was 4 SIP phones and it > >>> worked really well, just wanted to know how much I can push this box. > >>> > >>> George > >> George, > >> > >> I have several systems installed with the Soekris net5501's with between > >> 10 and 15 phones. I'd say you can push the box much higher but it > >> depends on what you're doing. I'm not transcoding. Most of the calls > >> are terminated on zaptel (dahdi--whatever) hardware with on-board echo > >> cancellation. If you were transcoding, your mileage may vary. > > -- > Darrick Hartman > DJH Solutions, LLC > http://www.djhsolutions.com > http://www.djhsolutions.com/wiki > > - > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > ___ > Astlinux-users mailing list > Astlinux-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > [EMAIL PROTECTED] > > > - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php___ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
Re: [Astlinux-users] Alternate Web Update
On Jun 6, 2008, at 3:56 PM, Michael Keuter wrote:
>> 1) Monitor tab now honors non-admin authenticated users, similarly
>> to the Voicemail tab.
>>
>> If a user is authenticated as a non-admin user, only recordings saved
>> with a base directory matching the user's username will be displayed.
>> For example, user 1000 will only see recordings in the 1000/
>> directory in the monitor directory. The admin user will be able to
>> play all recordings in the monitor directory.
>>
>> It is up to your extensions.conf dialplan to properly save the
>> recordings with user identities.
>
> Hi Lonnie,
>
> nice additions to the interface.
>
> Any idea how to do the user directory logic with the "automon" (one
> touch record) feature?
>
> Michael
I am no expert on "automon", but setting the following variables
might allow you to record in the proper directory.
Set(TOUCH_MONITOR_FORMAT=wav:monitor)
Set(TOUCH_MONITOR=${EXTEN}/${CALLERID})
Example here:
http://readlist.com/lists/lists.digium.com/asterisk-users/10/50441.html
Another approach would to run a cron job to move recorded calls from
the base monitor directory to the proper non-admin user's directory.
Please share if you get this to work the way you like.
Lonnie
-
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
___
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to [EMAIL
PROTECTED]
Re: [Astlinux-users] ALIX2c3 capacity
Sure. Almost all of the zaptel hardware is supported. Specifically, Digium, Rhino and Sangoma. There is support for Pika Technology hardware, but there are some changes required to get it to compile properly. There are a few odd-ball pieces of hardware from OpenVox which would require some patching to work, but it's all possible in Astlinux. I have several net5501's with the 8 port Rhino cards (and one install with the 24 port card, (7 FXO lines and 3 FXS). The 24 port card won't fit in the case, but the 8 port cards fit perfectly. Darrick George Masgras wrote: > no transcoding, ulaw end to end, SIP only. So you have a zaptel card > hooked up to the soekris board? that is awesome, didn't know you could > do it with that board and astlinux. > > On Fri, Jun 6, 2008 at 6:10 PM, Darrick Hartman (lists) > <[EMAIL PROTECTED]> wrote: >> George Masgras wrote: >>> Does anyone have an idea how many SIP phones/active calls/registration >>> requests(every 120 sec) an ALIX2c3 with a 1GB card can handle ? This >>> would be in PBX only mode. The max I've tried was 4 SIP phones and it >>> worked really well, just wanted to know how much I can push this box. >>> >>> George >> George, >> >> I have several systems installed with the Soekris net5501's with between >> 10 and 15 phones. I'd say you can push the box much higher but it >> depends on what you're doing. I'm not transcoding. Most of the calls >> are terminated on zaptel (dahdi--whatever) hardware with on-board echo >> cancellation. If you were transcoding, your mileage may vary. -- Darrick Hartman DJH Solutions, LLC http://www.djhsolutions.com http://www.djhsolutions.com/wiki - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
Re: [Astlinux-users] ALIX2c3 capacity
no transcoding, ulaw end to end, SIP only. So you have a zaptel card hooked up to the soekris board? that is awesome, didn't know you could do it with that board and astlinux. On Fri, Jun 6, 2008 at 6:10 PM, Darrick Hartman (lists) <[EMAIL PROTECTED]> wrote: > George Masgras wrote: >> Does anyone have an idea how many SIP phones/active calls/registration >> requests(every 120 sec) an ALIX2c3 with a 1GB card can handle ? This >> would be in PBX only mode. The max I've tried was 4 SIP phones and it >> worked really well, just wanted to know how much I can push this box. >> >> George > > George, > > I have several systems installed with the Soekris net5501's with between > 10 and 15 phones. I'd say you can push the box much higher but it > depends on what you're doing. I'm not transcoding. Most of the calls > are terminated on zaptel (dahdi--whatever) hardware with on-board echo > cancellation. If you were transcoding, your mileage may vary. > > Darrick > -- > Darrick Hartman > DJH Solutions, LLC > http://www.djhsolutions.com > http://www.djhsolutions.com/wiki > > - > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > ___ > Astlinux-users mailing list > Astlinux-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to [EMAIL > PROTECTED] > - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
Re: [Astlinux-users] ALIX2c3 capacity
George Masgras wrote: > Does anyone have an idea how many SIP phones/active calls/registration > requests(every 120 sec) an ALIX2c3 with a 1GB card can handle ? This > would be in PBX only mode. The max I've tried was 4 SIP phones and it > worked really well, just wanted to know how much I can push this box. > > George George, I have several systems installed with the Soekris net5501's with between 10 and 15 phones. I'd say you can push the box much higher but it depends on what you're doing. I'm not transcoding. Most of the calls are terminated on zaptel (dahdi--whatever) hardware with on-board echo cancellation. If you were transcoding, your mileage may vary. Darrick -- Darrick Hartman DJH Solutions, LLC http://www.djhsolutions.com http://www.djhsolutions.com/wiki - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
[Astlinux-users] ALIX2c3 capacity
Does anyone have an idea how many SIP phones/active calls/registration requests(every 120 sec) an ALIX2c3 with a 1GB card can handle ? This would be in PBX only mode. The max I've tried was 4 SIP phones and it worked really well, just wanted to know how much I can push this box. George - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
Re: [Astlinux-users] Alternate Web Update
>1) Monitor tab now honors non-admin authenticated users, similarly >to the Voicemail tab. > >If a user is authenticated as a non-admin user, only recordings saved >with a base directory matching the user's username will be displayed. >For example, user 1000 will only see recordings in the 1000/ >directory in the monitor directory. The admin user will be able to >play all recordings in the monitor directory. > >It is up to your extensions.conf dialplan to properly save the >recordings with user identities. Hi Lonnie, nice additions to the interface. Any idea how to do the user directory logic with the "automon" (one touch record) feature? Michael -- Email: mailto:[EMAIL PROTECTED] - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
