Capture card setup with OBS
Capture card setup with OBS So I wanna do a capture card setup guide. Here it is.This guide is for windows, I don't know how this works on mac.This is a guide that will use OBS studio and some other software, see below.You should read my OBS guides first. That will help you understand the software a bit more.This guide asumes your using an Elgato device. If your not using an Elgato device skip the Elgato software part. You will needA console or a PC you wanna use the capture card with.A capture card.OBS Studio. You can get it hereElgato Game Capture Software: You can get it hereA way to use OCR. I use the default one with NVDANote, In the elgato setup you will get the option for sound capture. This is Optional and is not for your game sound, but discord and other stuff. I don't use that so I skipped it.The Elgato softwareIf you have tryde the software you will know that it is mostly innaccessible. I say mostly because there is a way to get into the settings menu, and one's you are there you can use NVDA as normal.you will need to do a cupple of things first though:Connect the capture card to your console, or PC. You will need to use a USB 3 port on your computer. USB 2 doesn't work.set your gamecapture software window to maximizedGo to the shortcut that should be on your desktop, alternatively go into the folder where the software is installed and make a shortcut of the EXE file.Right click and go to properties. From here go to run. Set it to maximized and press OK.The console or PC that you wanna to capture must be off.Right then, let's begin!Open the software. Don't do anything just let NVDA say the window name. Then do OCR. If that doesn't work press the windows key and press it again to close the start menu. Now do OCR again.Alternatively You can edit some config files in the AppData folder, coming soon.You should here something like this: no signal, the XBOX one isn't connected to the HDMI settings.Press enter where it says settings. If all goes well you should be in the capture settings. Here you can use the tab key and change the stuff you want. Set the profile to whatever your capturing. The default one is XBOX one. The rest should be setup for you already, but check everything just in case. 60FPS should be enabled, if not enable it. Also make sure that audio is HDMI audio. This will make the audio come out of your PC speakers, we can change the output device later.Close the software and hopefully you don't need to use it again.OBS StudioMake a new sceen and name it whatever you want. Add a video capture device source.In the properties for the source select your capture card from the list. Then leave everything else at default, this is because we changed the options in the software. Now press OKNow go into obs settings and find audio. Find audio monitoring and select the audio device you want to use as monitoring device. Press OK and you'l be in the main window again. Go to where it says Elgato properties and press space on it. Go to advanced audio properties. Press tab until you here: monitor off and press down errow until you here: Monitor and Output. Press escape to close it, it saves automaticly.Go to the source list and press space to select the elgato source. Right click and go to transform. Note, NVDA likes to glitch out in this menu, the option below transform is: resize output (source size). Go down until you here: fit to screen.Now right click again on the source and go to: fullscreen Projector (Source), select your display and you got yourself a preview of the source in fullscreen.If you liked this guide please click that thumbs up button, and sub to my youtube for content like this. URL: https://forum.audiogames.net/post/597750/#p597750 -- Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
Capture card setup with OBS
Capture card setup with OBS So I wanna do a capture card setup guide. Here it is.This guide is for windows, I don't know how this works on mac.This is a guide that will use OBS studio and some other software, see below.You should read my OBS guides first. That will help you understand the software a bit more.This guide asumes your using an Elgato device. If your not using an Elgato device skip the Elgato software part. You will needA console or a PC you wanna use the capture card with.A capture card.OBS Studio. You can get it hereElgato Game Capture Software: You can get it hereA way to use OCR. I use the default one with NVDANote, In the elgato setup you will get the option for sound capture. This is Optional and is not for your game sound, but discord and other stuff. I don't use that so I skipped it.The Elgato softwareIf you have tryde the software you will know that it is mostly innaccessible. I say mostly because there is a way to get into the settings menu, and one's you are there you can use NVDA as normal.you will need to do a cupple of things first though:Connect the capture card to your console, or PC. You will need to use a USB 3 port on your computer. USB 2 doesn't work.set your gamecapture software window to maximizedGo to the shortcut that should be on your desktop, alternatively go into the folder where the software is installed and make a shortcut of the EXE file.Right click and go to properties. From here go to run. Set it to maximized and press OK.The console or PC that you wanna to capture must be off.Right then, let's begin!Open the software. Don't do anything just let NVDA say the window name. Then do OCR. If that doesn't work press the windows key and press it again to close the start menu. Now do OCR again.Alternatively You can edit some config files in the AppData folder, coming soon.You should here something like this: no signal, the XBOX one isn't connected to the HDMI settings.Press enter where it says settings. If all goes well you should be in the capture settings. Here you can use the tab key and change the stuff you want. Set the profile to whatever your capturing. The default one is XBOX one. The rest should be setup for you already, but check everything just in case. 60FPS should be enabled, if not enable it. Also make sure that audio is HDMI audio. This will make the audio come out of your PC speakers, we can change the output device later.Close the software and hopefully you don't need to use it again.OBS StudioMake a new sceen and name it whatever you want. Add a video capture device source.In the properties for the source select your capture card from the list. Then leave everything else at default, this is because we changed the options in the software. Now press OKNow go into obs settings and find audio. Find audio monitoring and select the audio device you want to use as monitoring device. Press OK and you'l be in the main window again. Go to where it says Elgato properties and press space on it. Go to advanced audio properties. Press tab until you here: monitor off and press down errow until you here: Monitor and Output. Press escape to close it, it saves automaticly.Go to the source list and press space to select the elgato source. Right click and go to transform. Note, NVDA likes to glitch out in this menu. the option below transform is: resize output (source size). Go down until you here: fit to screen.Now right click again on the source and go to: fullscreen Projector (Source), select your display and you got yourself a preview of the source in fullscreen.If you liked this guide please click that thumbs up button, and sub to my youtube for content like this. URL: https://forum.audiogames.net/post/597750/#p597750 -- Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
Capture card setup with OBS
Capture card setup with OBS So I wanna do a capture card setup guide. Here it is.This guide is for windows, I don't know how this works on mac.This is a guide that will use OBS studio and some other software, see below.You should read my OBS guides first. That will help you understand the software a bit more.This guide asumes your using an Elgato device. If your not using an Elgato device skip the Elgato software part. You will needA console or a PC you wanna use the capture card with.A capture card.OBS Studio. You can get it hereElgato Game Capture Software: You can get it hereA way to use OCR. I use the default one with NVDANote, In the elgato setup you will get the option for sound capture. This is Optional and is not for your game sound, but discord and other stuff. I don't use that so I skipped it.The Elgato software]If you have tryde the software you will know that it is mostly innaccessible. I say mostly because there is a way to get into the settings menu, and one's you are there you can use NVDA as normal.you will need to do a cupple of things first though:Connect the capture card to your console, or PC. You will need to use a USB 3 port on your computer. USB 2 doesn't work.set your gamecapture software window to maximizedGo to the shortcut that should be on your desktop, alternatively go into the folder where the software is installed and make a shortcut of the EXE file.Right click and go to properties. From here go to run. Set it to maximized and press OK.The console or PC that you wanna to capture must be off.Right then, let's begin!Open the software. Don't do anything just let NVDA say the window name. Then do OCR. If that doesn't work press the windows key and press it again to close the start menu. Now do OCR again.Alternatively You can edit some config files in the AppData folder, coming soon.You should here something like this: no signal, the XBOX one isn't connected to the HDMI settings.Press enter where it says settings. If all goes well you should be in the capture settings. Here you can use the tab key and change the stuff you want. Set the profile to whatever your capturing. The default one is XBOX one. The rest should be setup for you already, but check everything just in case. 60FPS should be enabled, if not enable it. Also make sure that audio is HDMI audio. This will make the audio come out of your PC speakers, we can change the output device later.Close the software and hopefully you don't need to use it again.OBS StudioMake a new sceen and name it whatever you want. Add a video capture device source.In the properties for the source select your capture card from the list. Then leave everything else at default, this is because we changed the options in the software. Now press OKNow go into obs settings and find audio. Find audio monitoring and select the audio device you want to use as monitoring device. Press OK and you'l be in the main window again. Go to where it says Elgato properties and press space on it. Go to advanced audio properties. Press tab until you here: monitor off and press down errow until you here: Monitor and Output. Press escape to close it, it saves automaticly.Go to the source list and press space to select the elgato source. Right click and go to transform. Note, NVDA likes to glitch out in this menu. the option below transform is: resize output (source size). Go down until you here: fit to screen.Now right click again on the source and go to: fullscreen Projector (Source), select your display and you got yourself a preview of the source in fullscreen.If you liked this guide please click that thumbs up button, and sub to my youtube for content like this. URL: https://forum.audiogames.net/post/597750/#p597750 -- Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
Dragon Ball FighterZ Menu Guide
Dragon Ball FighterZ Menu Guide Dragon Ball FighterZ Menu guide.I will be refering to the buttons as this:X/A: confirmCircle/B: backOptions/start: Start.The rest will be Playstation style.Note, I don't know the keyboard controls yet, but every controler should work with this.This first part of the guide is refering to the PC version's startup. After that the rest is the same across all plattforms.This is not a complete guide, not all menu items are in here yet.Starting the gameWhen you start the game you will here EAC launcher error window a few times, this is normal and they go away very quickly. After that there are some logoes on the screen, this is not a window itself, but will appear over your main window. A little after that you should have a Dragon Ball FighterZ window, go into that, and a few seconds later you should have music playing.Main MenuThe main menu is usually just spamming the confirm button. There are a few options, but I don't know what they are, you don't need to mess with them. After pressing your confirm button a few times you will here a different sound then the first ones, this is the game loading you into the main lobby.The settings menuSo you just got into the main game and want to start playing, well not yet friend.The game has a few audio settings you would want to check out first. The game comes with the japanese dub, but thankfully you can change it to the english dub we all know and love.Open your player menu by pressing start. Then go up two times and press confirm. Then hold your up button until you can't go up anymore, don't press the button it's important that you hold it, otherwise it won't work and you will be stuck in a loop. From here press down 4 times and then confirm.Now you are in the audio menu. If you move left or right you can change the music volume, one down and the sound efects volume can be changed. If you go three down from the music slider and then press right one time you will change the dyalog to english.Press the back button until it doesn't do anything to exit, it saves automaticly.The lobbyThe lobby is your main game room. Here you go to all your different modes you wanna play.The lobby is a big map that consists of manny places to walk to. The lobby is on a tyle baces, so you move one square eatch time you move. You can use your D Pad to move around, but why would you do that when you can teleport directly to the mode you wanna play?Press L2 to open the quick menu.The first option is online play, use this to battle random opponents.go one down and you will find the storry mode. The storry mode is not a storry for DBZ, but is an original storry. It's not accessible so I suggest you to leave it alone.Two down from here we have the training area. Here you can practice and get used to the game, I spend a lot of time here getting down the combos.One down from here and the arcade area is the next mode. This is a mode that allows you to test your skills in battle after battle. There is manny difficulty settings in the mode itself. You will fight a number of battle right after the other.the next one is versus play. Here you can play against the CPU or a friend.That's everything so far. I will update the guide as time goes on.If you found this helpfull please hit that thumbs up button URL: https://forum.audiogames.net/post/590276/#p590276 -- Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
Dragon Ball FighterZ Menu Guide
Dragon Ball FighterZ Menu Guide Dragon Ball FighterZ Menu guide.I will be refering the buttons as this:X/A: confirmCircle/B: backOptions/start: Start.The rest will be Playstation style.This is not a complete guide, not all menu items are in here yet.Starting the gameWhen you start the game you will here EAC launcher error window a few times, this is normal and they go away very quickly. After that there are some logoes on the screen, this is not a window itself, but will appear over your main window. A little after that you should have a Dragon Ball FighterZ window, go into that, and a few seconds later you should have music playing.Main MenuThe main menu is usually just spamming the confirm button. There are a few options, but I don't know what they are, you don't need to mess with them. After pressing your confirm button a few times you will here a different sound then the first ones, this is the game loading you into the main lobby.The settings menuSo you just got into the main game and want to start playing, well not yet friend.The game has a few audio settings you would want to check out first. The game comes with the japanese dub, but thankfully you can change it to the english dub we all know and love.Open your player menu by pressing start. Then go up two times and press confirm. Then hold your up button until you can't go up anymore, don't press the button it's important that you hold it, otherwise it won't work and you will be stuck in a loop. From here press down 4 times and then confirm.Now you are in the audio menu. If you move left or right you can change the music volume, one down and the sound efects volume can be changed. If you go three down from the music slider and then press right one time you will change the dyalog to english.Press the back button until it doesn't do anything to exit, it saves automaticly.The lobbyThe lobby is your main game room. Here you go to all your different modes you wanna play.The lobby is a big map that consists of manny places to walk to. The lobby is on a tyle baces, so you move one square eatch time you move. You can use your D Pad to move around, but why would you do that when you can teleport directly to the mode you wanna play?Press L2 to open the quick menu.The first option is online play, use this to battle random opponents.go one down and you will find the storry mode. The storry mode is not a storry for DBZ, but is an original storry. It's not accessible so I suggest you to leave it alone.Two down from here we have the training area. Here you can practice and get used to the game, I spend a lot of time here getting down the combos.One down from here and the arcade area is the next mode. This is a mode that allows you to test your skills in battle after battle. There is manny difficulty settings in the mode itself. You will fight a number of battle right after the other.the next one is versus play. Here you can play against the CPU or a friend.That's everything so far. I will update the guide as time goes on.If you found this helpfull please hit that thumbs up button URL: https://forum.audiogames.net/post/590276/#p590276 -- Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
How to load the wii system menu and play online on Dolphin emulator
How to load the wii system menu and play online on Dolphin emulator Hi allSo this will be a guide showing you all how to install the wii system menu, and play native online on dolphin emulator.Why would we do this?Well firstly: you can play online with other people who uses a real wii, you get the full wii system experiance and lastly. You can homebrew the wii, then load homebrew games and have all sorts of fun.Let's dive in!First thing you want to do is make sure that your running the latest dev build of dolphin. You can find the dolphin downloads hereWhen you have made sure that your running the latest dev version of dolphin go to tools and preforme online system update. From there select your regionImportant. If you have usa games, but select jpn the games will not appear in the disc channel.Now we need to map the controls corectli. Go to wii remote and configur the controler to your liking.After that go to the tab wich says motion simulation. here you can configur the shaking, but we need to configure the pointerWhere it says up, down, left, right. That is where you need to map your controler. When that's done go back to the main window of dolphin and go to tools>LoadWiiSystemMenu.Here's where things get tricky. You will need to use a lot of OCR, that is because you need to select your language and some other stuff. If you can get sighted assistance that would be the easiest option, but if you reelly want to try.Use the wii pointer to navigate around. The pointer makes a sound to indicate that it's on something you can interact with. Use that to get thru this setup screen.I don't know the layout of the keys on the keyboard used for the naming. So note that this part could be hard.When your all done with the setup you should here music, that indicates that you are on the wii home screen.The disc channel is top left. that is where you can load your game. I say game, because you can only have one game in the disc channel at the time. To change the game to be loaded. press alt tab to go back to dolphin without closing the wii menu. Find your game in the list of games, and press aplications key. Now select set as default. If that doesn't work go to file and select change disc. There you can select the disc to be loaded.Now press alt tab again and go to the top left and hit your (A) button to open the disc channel. You will here a special intro for eatch game you start from there.if you open the wrong channel press aether the plus, button or the minus button to cycle thru the channels until you find the disc channelto start a game press the A button when the pointer is down to the right of your screen. There is only to buttons to find here, so it shouldn't take that long until you find it. You will here a long ok kinda sound indicating that the game is starting.If you get an error code when trying to go online, that is normal, and we will fix that now.There is only one thing we need. And that is: wiimmfi patcher. You can download it hereExtract the foalder and go to the windows folder located within the patcher folder.Now find the game you want to patch and copy it into that folder. Then run the bat file and wait. When it's done go out of the windows folder and go in to the wiimmfi-images folder.From there copy the file inside and put it in the directory where you have all your wii games, replace the original one.Now load the game and have fun playing online.This guide took a long time to make, so please hit that thumbs up button! And give me suggestions on guides I can make in the future. URL: https://forum.audiogames.net/post/565614/#p565614 -- Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
How to load the wii system menu and play online on Dolphin emulator
How to load the wii system menu and play online on Dolphin emulator Hi allSo this will be a guide showing you all how to install the wii system menu, and play native online on dolphin emulator.Why would we do this?Well firstly: you can play online with other people who uses a real wii, you get the full wii system experiance and last. You can homebrue the wii, then load homebrue games and have all sorts of fun.Let's dive in!First thing you want to do is make sure that your running the latest dev build of dolphin. You can find the dolphin downloads hereWhen you have made sure that your running the latest dev version of dolphin go to tools and preform online system update. From there select your regionImportant. If you have usa games, but select jpn the games will not appear in the disc channel.Now we need to map the controls corectli. Go to wii remote and configur the controler to your liking.After that go to the tab wich says motion simulation. here you can configur the shaking, but we need to configure the pointerWhere it says up, down, left, right. That is where you need to map your controler. When that's done go back to the main window of dolphin and go to tools>LoadWiiSystemMenu.Here's where things get tricky. You will need to use a lot of OCR, that is because you need to select your language and some other stuff. If you can get sighted assistance that would be the easiest option, but if you reelly want to try.Use the wii pointer to navigate around. The pointer makes a sound to indicate that it's on something you can interact with. Use that to get thru this setup screen.I don't know the layout of the keys on the keyboard used for the naming. So note that this part could be hard.When your all done with the setup you should here music, that indicates that you are on the wii home screen.The disc channel is top left. that is where you can load your game. I say game, because you can only have one game in the disc channel at the time. To change the game to be loaded. press alt tab to go back to dolphin without closing the wii menu. Find your game in the list of games, and press aplications key. Now select set as default. If that doesn't work go to file and select change disc. There you can select the disc to be loaded.Now press alt tab again and go to the top left and hit your (A) button to open the disc channel. You will here a special intro for eatch game you start from there.if you open the wrong channel press aether the plus, button or the minus button to cycle thru the channels until you find the disc channelto start a game press the A button when the pointer is down to the right of your screen. There is only to buttons to find here, so it shouldn't take that long until you find it. You will here a long ok kinda sound indicating that the game is starting.If you get an error code when trying to go online, that is normal, and we will fix that now.There is only one thing we need. And that is: wiimmfi patcher. You can download it hereExtract the foalder and go to the windows folder located within the patcher folder.Now find the game you want to patch and copy it into that folder. Then run the bat file and wait. When it's done go out of the windows folder and go in to the wiimmfi-images folder.From there copy the file inside and put it in the directory where you have all your wii games, replace the original one.Now load the game and have fun playing online.This guide took a long time to make, so please hit that thumbs up button! And give me suggestions on guides I can make in the future. URL: https://forum.audiogames.net/post/565614/#p565614 -- Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
The set up guide to OBS studio
The set up guide to OBS studio Hi all.So I have goten a request for a OBS ritten guide. Well here it is.If you dont know what OBS is. It is a software that alows you to record your screen as well as your audio and you can live stream to youtube, twitch, mixer and so on. In this guide we wil focus on the basic setup so that you can have your screen and audio ready to be streamed.the first thing you need to do is download OBS studio. The reason you are not downloading OBS clasic is because it is out of date, and does not have all the newest features.Here is the link to the download page: ObsDownloadsHere you select your preferd download type and download the program.Next thing to do is install the program. If you have the installer. Just follow the on screen instructions and you will be good to go.When you have everything up and running you can open the app. When you are in there you will automaticly start in your sceen selection. There will already be a sceen for you that should be named somthing like sceen 1. To add a source to that sceen press tab one time. Then open the context menu. I use the applications key. When you are in the menu find add and press enter. Here you can use the errow keys or tab to see all the different sources. If you want to capture your screen you select display capture. When you have done that you will be asked to enter a name for the source, you can name it what ever you want. When you are done there press ok. And now you are in the display propertys. Here you can select the display to capture, if you only have one display it will be on display one. You can also capture your curser if you want that. When you are done with that press ok.Congratulations! You now have a source set up.Next thing to do is the settings. There is 2 ways to access the settings menu, but the easiest is to use the alt menu. Under file, go down untill you find settings and press enter.Now you are in the setting menu of OBS. The first categorry is genneral. You navigate the cattegorys by using the up and down errows, then tab to go into them and see the settings for eatch cattegory. The genneral is just personal preference.Now. Go one down. You should here stream. Then press tab. Under service select the platform you want to stream to. For youtube you select youtube/youtube-gaming. Then tab and select primary injest server.After that you will be in a edit field.Now you need to get your stream key.I use Youtube, so I do not know how this will work for twitch, but if you to are using youtube go to: LiveDashboardHere you navigate by edit field untill you find: Streamname/key.When you find that go one down and press Reveal, then go one up and copy that line.When you are done go one down and press hide.Go back to OBS and paste the key into the edit field. You do not need to go into focus mode, just press CTRL +v. Now go back to the cattegorys and go down until you find audio.Here you can select the mic sample rate and channels, note that if you select mono your desktop audio will be in mono as well. I use a mono mic, but I set the channels to sterio.Now you can select your desktop audio device and your mic input. You can have 2 desktop devices and 4 mic inputs.And when you are done with that find OK and press it.Now you are in the main interface and you can tab around. Do that until you find start streaming. When you press that it will start streaming to youtube.I hope you found this guide helpfull. And if you want me to make more of them just let me know. URL: https://forum.audiogames.net/post/534194/#p534194 -- Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
The set up guide to OBS studio
The set up guide to OBS studio Hi all.So I have goten a request for a OBS ritten guide. Well here it is.If you dont know what OBS is. It is a software that alows you to record your screen as well as your audio and you can live stream to youtube, twitch, mixer and so on. In this guide we wil focus on the basic setup so that you can have your screen and audio ready to be streamed.the first thing you need to do is download OBS studio. The reason you are not downloading OBS clasic is because it is out of date, and does not have all the newest features.Here is the link to the download page: ObsDownloadsHere you select your preferd download type and download the program.Next thing to do is install the program. If you have the installer. Just follow the on screen instructions and you will be good to go.When you have everything up and running you can open the app. When you are in there you will automaticly start in your sceen selection. There will already be a sceen for you that should be named somthing like sceen 1. To add a source to that sceen press tab one time. Then open the context menu. I use the applications key. When you are in the menu find add and press enter. Here you can use the errow keys or tab to see all the different sources. If you want to capture your screen you select display capture. When you have done that you will be asked to enter a name for the source, you can name it what ever you want. When you are done there press ok. And now you are in the display propertys. Here you can select the display to capture, if you only have one display it will be on display one. You can also capture your curser if you want that. When you are done with that press ok.Congratulations! You now have a source set up.Next thing to do is the settings. There is 2 ways to access the settings menu, but the easiest is to use the alt menu. Under file, go down untill you find settings and press enter.Now you are in the setting menu of OBS. The first categorry is genneral. You navigate the cattegorys by using the up and down errows, then tab to go into them and see the settings for eatch cattegory. The genneral is just personal preference.Now. Go one down. You should here stream. Then press tab. Under service select the platform you want to stream to. For youtube you select youtube/youtube-gaming. Then tab and select primary injest server.After that you will be in a edit field.Now you need to get your stream key.I use Youtube, so I do not know how this will work for twitch, but if you to are using youtube go to this link: LiveDashboardHere you navigate by edit field untill you find: Streamname/key.When you find that go one down and press Reveal, then go one up and copy that line.When you are done go one down and press hide.Go back to OBS and paste the key into the edit field. You do not need to go into focus mode, just press CTRL +v. Now go back to the cattegorys and go down until you find audio.Here you can select the mic sample rate and channels, note that if you select mono your desktop audio will be in mono as well. I use a mono mic, but I set the channels to sterio.Now you can select your desktop audio device and your mic input. You can have 2 desktop devices and 4 mic inputs.And when you are done with that find OK and press it.Now you are in the main interface and you can tab around. Do that until you find start streaming. When you press that it will start streaming to youtube.I hope you found this guide helpfull. And if you want me to make more of them just let me know. URL: https://forum.audiogames.net/post/534194/#p534194 -- Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
The set up guide to OBS studio
The set up guide to OBS studio Hi all.So I have goten a request for a OBS ritten guide. Well here it is.If you dont know what OBS is. It is a software that alows you to record your screen as well as your audio and you can live stream to youtube, twitch, mixer and so on. In this guide we wil focus on the basic setup so that you can have your screen and audio ready to be streamed.the first thing you need to do is download OBS studio. The reason you are not downloading OBS clasic is because it is out of date, and does not have all the newest features.Here is the link to the download page: ObsDownloadsHere you select your preferd download type and download the program.Next thing to do is install the program. If you have the installer. Just follow the on screen instructions and you will be good to go.When you have everything up and running you can open the app. When you are in there you will autematicly start in your sceen selection. There will already be a sceen for you that should be named somthing like sceen 1. To add a source to that sceen press tab one time. Then open the context menu. I use the applications key. When you are in the menu find add and press enter. Here you can use the errow keys or tab to see all the different sources. If you want to capture your screen you select display capture. When you have done that you will be asked to enter a name for the source, you can name it what ever you want. When you are done there press ok. And now you are in the display propertys. Here you can select the display to capture, if you only have one display it will be on display one. You can also capture your curser if you want that. When you are done with that press ok.Congratulations! You now have a source set up.Next thing to do is the settings. There is 2 ways to access the settings menu, but the easiest is to use the alt menu. Under file, go down untill you find settings and press enter.Now you are in the setting menu of OBS. The first categorry is genneral. You navigate the cattegorys by using the up and down errows, then tab to go into them and see the settings for eatch cattegory. The genneral is just personal preference.Now. Go one down. You should here stream. Then press tab. Under service select the platform you want to stream to. For youtube you select youtube/youtube-gaming. Then tab and select primary injest server.After that you will be in a edit field.Now you need to get your stream key.I use Youtube, so I do not know how this will work for twitch, but if you to are using youtube go to this link: =https://www.youtube.com/live_dashboard]LiveDashboardHere you navigate by edit field untill you find: Streamname/key.When you find that go one down and press Reveal, then go one up and copy that line.When you are done go one down and press hide.Go back to OBS and paste the key into the edit field. You do not need to go into focus mode, just press CTRL +v. Now go back to the cattegorys and go down until you find audio.Here you can select the mic sample rate and channels, note that if you select mono your desktop audio will be in mono as well. I use a mono mic, but I set the channels to sterio.Now you can select your desktop audio device and your mic input. You can have 2 desktop devices and 4 mic inputs.And when you are done with that find OK and press it.Now you are in the main interface and you can tab around. Do that until you find start streaming. When you press that it will start streaming to youtube.I hope you found this guide helpfull. And if you want me to make more of them just let me know. URL: https://forum.audiogames.net/post/534194/#p534194 -- Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
How to load the wii system menu and play online on Dolphin emulator
How to load the wii system menu and play online on Dolphin emulator Hi allSo this will be a guide showing you all how to install the wii system menu, and play native online on dolphin emulator.Why would we do this?Well firstly: you can play online with other people who uses a real wii, you get the full wii system experiance and last. You can homebrue the wii, then load homebrue games and have all sorts of fun.Let's dive in!First thing you want to do is make sure that your running the latest dev build of dolphin. You can find the dolphin downloads hereWhen you have made sure that your running the latest dev version of dolphin go to tools and preform online system update. From there select your regionImportant. If you have usa games, but select jpn the games will not appear in the disc channel.Now we need to map the controls corectli. Go to wii remote and configur the controler to your liking.After that go to the tab wich says motion simulation. here you can configur the shaking, but we need to configure the pointerWhere it says up, down, left, right. That is where you need to map your controler. When that's done go back to the main window of dolphin and go to tools>LoadWiiSystemMenu.Here's where things get tricky. You will need to use a lot of OCR, that is because you need to select your language and some other stuff. If you can get sighted assistance that would be the easiest option, but if you reelly want to try.Use the wii pointer to navigate around. The pointer makes a sound to indicate that it's on something you can interact with. Use that to get thru this setup screen.I don't know the layout of the keys on the keyboard used for the naming. So note that this part could be hard.When your all done with the setup you should here music, that indicates that you are on the wii home screen.The disc channel is top left. that is where you can load your game. I say game, because you can only have one game in the disc channel at the time. To change the game to be loaded. press alt tab to go back to dolphin without closing the wii menu. Find your game in the list of games, and press aplications key. Now select set as defult. If that doesn't work go to file and select change disc. There you can select the disc to be loaded.Now press alt tab again and go to the top left and hit your (A) button to open the disc channel. You will here a special intro for eatch game you start from there.if you open the wrong channel press aether the plus, button or the minus button to cycle thru the channels until you find the disc channelto start a game press the A button when the pointer is down to the right of your screen. There is only to buttons to find here, so it shouldn't take that long until you find it. You will here a long ok kinda sound indicating that the game is starting.If you get an error code when trying to go online, that is normal, and we will fix that now.There is only one thing we need. And that is: wiimmfi patcher. You can download it hereExtract the foalder and go to the windows foalder located within the patcher foalder.Now find the game you want to patch and copy it into that foalder. Then run the bat file and wait. When it's done go out of the windows foalder and go the wiimmfi-images.From there copy the file inside that foalder and put it in the directory where you have all your wii games. replace the original game.Now load the game and have fun playing online.This guide took a long time to make, so please hit that thumbs up button! And give me suggestions on guides I can make in the future. URL: https://forum.audiogames.net/post/565614/#p565614 -- Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
How to load the wii system menu and play online on Dolphin emulator
How to load the wii system menu and play online on Dolphin emulator Hi allSo this will be a guide showing you all how to install the wii system menu, and play native online on dolphin emulator.Why would we do this?Well firstly: you can play online with other people who uses a real wii, you get the full wii system experiance and last. You can homebrue the wii, then load homebrue games and have all sorts of fun.Let's dive in!First thing you want to do is make sure that your running the latest dev build of dolphin. You can find the dolphin downloads hereWhen you have made sure that your running the latest dev version of dolphin go to tools and preform online system update. From there select your regionImportant. If you have usa games, but select jpn the games will not appear in the disc channel.Now we need to map the controls corectli. Go to wii remote and configur the controler to your liking.After that go to the tab wich says motion simulation. here you can configur the shaking, but we need to configure the pointerWhere it says up, down, left, right. That is where you need to map your controler. When that's done go back to the main window of dolphin and go to tools>LoadWiiSystemMenu.Here's where things get tricky. You will need to use a lot of OCR, that is because you need to select your language and some other stuff. If you can get sighted assistance that would be the easiest option, but if you reelly want to try.Use the wii pointer to navigate around. The pointer makes a sound to indicate that it's on something you can interact with. Use that to get thru this setup screen.When your all done with the setup you should here music, that indicates that you are on the wii home screen.The disc channel is top left. that is where you can load your game. I say game, because you can only have one game in the disc channel at the time. To change the game to be loaded. press alt tab to go back to dolphin without closing the wii menu. Find your game in the list of games, and press aplications key. Now select set as defult. If that doesn't work go to file and select change disc. There you can select the disc to be loaded.Now press alt tab again and go to the top left and hit your (A) button to open the disc channel. You will here a special intro for eatch game you start from there.if you open the wrong channel press aether the plus, button or the minus button to cycle thru the channels until you find the disc channelto start a game press the A button when the pointer is down to the right of your screen. There is only to buttons to find here, so it shouldn't take that long until you find it. You will here a long ok kinda sound indicating that the game is starting.If you get an error code when trying to go online, that is normal, and we will fix that now.There is only one thing we need. And that is: wiimmfi patcher. You can download it hereExtract the foalder and go to the windows foalder located within the patcher foalder.Now find the game you want to patch and copy it into that foalder. Then run the bat file and wait. When it's done go out of the windows foalder and go the wiimmfi-images.From there copy the file inside that foalder and put it in the directory where you have all your wii games. replace the original game.Now load the game and have fun playing online.This guide took a long time to make, so please hit that thumbs up button! And give me suggestions on guides I can make in the future. URL: https://forum.audiogames.net/post/565614/#p565614 -- Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
How to load the wii system menu and play online on Dolphin emulator
How to load the wii system menu and play online on Dolphin emulator Hi allSo this will be a guide showing you all how to install the wii system menu, and play native online on dolphin emulator.Why would we do this?Well firstly: you can play online with other people who uses a real wii, you get the full wii system experiance and last. You can homebrue the wii, then load homebrue games and have all sorts of fun.Let's dive in!First thing you want to do is make sure that your running the latest dev build of dolphin. You can find the dolphin downloads hereWhen you have made sure that your running the latest dev version of dolphin go to tools and preform online system update. From there select your regionImportant. If you have usa games, but select jpn the games will not appear in the disc channel.Now we need to map the controls corectli. Go to wii remote and configur the controler to your liking.After that go to the tab wich says motion simulation. here you can configur the shaking, but we need to configure the pointerWhere it says up, down, left, right. That is where you need to map your controler. When that's done go back to the main window of dolphin and go to tools>LoadWiiSystemMenu.Here's where things get tricky. You will need to use a lot of OCR, that is because you need to select your language and some other stuff. If you can get sighted assistance that would be the easiest option, but if you reelly want to try.Use the wii pointer to navigate around. The pointer makes a sound to indicate that it's on something you can interact with. Use that to get thru this setup screen.When your all done with the setup you should here music, that indicates you that you are on the wii home screen.The disc channel is top left. that is where you can load your game. I say game, because you can only have one game in the disc channel at the time. To change the game to be loaded. press alt tab to go back to dolphin without closing the wii menu. Find your game in the list of games, and press aplications key. Now select set as defult. If that doesn't work go to file and select change disc. There you can select the disc to be loaded.Now press alt tab again and go to the top left and hit your (A) button to open the disc channel. You will here a special intro for eatch game you start from there.if you open the wrong channel press aether the plus, button or the minus button to cycle thru the channels until you find the disc channelto start a game press the A button when the pointer is down to the right of your screen. There is only to buttons to find here, so it shouldn't take that long until you find it. You will here a long ok kinda sound indicating that the game is starting.If you get an error code when trying to go online, that is normal, and we will fix that now.There is only one thing we need. And that is: wiimmfi patcher. You can download it hereExtract the foalder and go to the windows foalder located within the patcher foalder.Now find the game you want to patch and copy it into that foalder. Then run the bat file and wait. When it's done go out of the windows foalder and go the wiimmfi-images.From there copy the file inside that foalder and put it in the directory where you have all your wii games. replace the original game.Now load the game and have fun playing online.This guide took a long time to make, so please hit that thumbs up button! And give me suggestions on guides I can make in the future. URL: https://forum.audiogames.net/post/565614/#p565614 -- Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
How to load the wii system menu and play online on Dolphin emulator
How to load the wii system menu and play online on Dolphin emulator Hi allSo this will be a guide showing you all how to install the wii system menu, and play native online on dolphin emulator.Why would we do this?Well firstly: you can play online with other people who uses a real wii, you get the full wii system experiance and last. You can homebrue the wii, then load homebrue games and have all sorts of fun.Let's dive in!First thing you want to do is make sure that your running the latest dev build of dolphin. You can find the dolphin downloads hereWhen you have made sure that your running the latest dev version of dolphin go to tools and preform online system update. From there select your regionImportant. If you have usa games, but select jpn the games will not apear in the disc channel.Now we need to map the controls corectli. Go to wii remote and configur the controler to your liking.After that go to the tab wich says motion simulation. here you can configur the shaking, but we need to configure the pointerWhere it says up, down, left, right. That is where you need to map your controler. When that's done go back to the main window of dolphin and go to tools>LoadWiiSystemMenu.Here's where things get tricky. You will need to use a lot of OCR, that is because you need to select your language and some other stuff. If you can get sighted assistance that would be the easiest option, but if you reelly want to try.Use the wii pointer to navigate around. The pointer makes a sound to indicate that it's on something you can interact with. Use that to get thru this setup screen.When your all done with the setup you should here music, that indicates you that you are on the wii home screen.The disc channel is top left. that is where you can load your game. I say game, because you can only have one game in the disc channel at the time. To change the game to be loaded. press alt tab to go back to dolphin without closing the wii menu. Find your game in the list of games, and press aplications key. Now select set as defult. If that doesn't work go to file and select change disc. There you can select the disc to be loaded.Now press alt tab again and go to the top left and hit your (A) button to open the disc channel. You will here a special intro for eatch game you start from there.if you open the wrong channel press aether the plus, button or the minus button to cycle thru the channels until you find the disc channelto start a game press the A button when the pointer is down to the right of your screen. There is only to buttons to find here, so it shouldn't take that long until you find it. You will here a long ok kinda sound indicating that the game is starting.If you get an error code when trying to go online, that is normal, and we will fix that now.There is only one thing we need. And that is: wiimmfi patcher. You can download it hereExtract the foalder and go to the windows foalder located within the patcher foalder.Now find the game you want to patch and copy it into that foalder. Then run the bat file and wait. When it's done go out of the windows foalder and go the wiimmfi-images.From there copy the file inside that foalder and put it in the directory where you have all your wii games. replace the original game.Now load the game and have fun playing online.This guide took a long time to make, so please hit that thumbs up button! And give me suggestions on guides I can make in the future. URL: https://forum.audiogames.net/post/565614/#p565614 -- Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
How to load the wii system menu, and play online on Dolphin emulator
How to load the wii system menu, and play online on Dolphin emulator Hi allSo this will be a guide showing you all how to install the wii system menu, and play native online on dolphin emulator.Why would we do this?Well firstly: you can play online with other people who uses a real wii, you get the full wii system experiance and last. You can homebrue the wii, then load homebrue games and have all sorts of fun.Let's dive in!First thing you want to do is make sure that your running the latest dev build of dolphin. You can find the dolphin downloads hereWhen you have made sure that your running the latest dev version of dolphin go to tools and preform online system update. From there select your regionImportant. If you have usa games, but select jpn the games will not apear in the disc channel.Now we need to map the controls corectly. Go to wii remote and configur the controler to your liking.After that go to the tab wich says motion simulation. here you can configur the shaking, but we need to configure the pointerWhere it says up, down, left, right. That is where you need to map your controler. When that's done go back to the main window of dolphin and go to tools>LoadWiiSystemMenu.Here's where things get tricky. You will need to use a lot of OCR, that is becouse you need to select your language and some other stuff. If you can get sighted assistance that would be the easiest option, but if you realy want to try.Use the wii pointer to navigate around. The pointer makes a sound to indicate that it's on somthing you can interact with. Use that to get thru this setup screen.When your all done with the setup you should here music, that indicates you that you are on the wii home screen.The disc channel is top left. that is where you can load your game. I say game, because you can only have one game in the disc channel at the time. To change the game to be loaded. press alt tab to go back to dolphin without closing the wii menu. Find your game in the list of games, and press aplications key. Now select set as defult. If that doesnt work go to file and select change disc. There you can select the disc to be loaded.Now press alt tab again and go to the top left and hit your (A) button to open the disc channel. You will here a speciall intro for eatch game you start from there.if you open the wrong channel press eather the plus, button or the minus button to sicle thru the channels until you find the disc channelto start a game press the A button when the pointer is down to the right of your screen. There is only to buttons to find here, so it shouldn't take that long until you find it. You will here a long bip sound indicating that the game is starting.If you get an error code when trying to go online, that is normal, and we will fix that now.There is only one thing we need. And that is: wiimmfi patcher. You can download it hereExtract the foalder and go to the windows foalder located within the patcher foalder.Now find the game you want to patch and copy it into that foalder. Then run the bat file and wait. When it's done go out of the windows foalder and go the wiimmfi-images.From there copy the file inside that foalder and put it in the directory where you have all your wii games. replace the original game.Now load the game and have fun playing online.This guide took a long time to make, so please hit that thumbs up button! And give me suggestions on guides I can make in the future. URL: https://forum.audiogames.net/post/565614/#p565614 -- Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
Sceens and sources in OBS
Sceens and sources in OBS Hi again.I am back with yet a nother guide for OBS.This time I will go into detail about sceens and sources in OBS.So what is a sceen.A sceen is basicly a profile, eatch time you switch sceens you will also have switched your sources, depending on the sceen.For instance, I have a sceen with a game capture source.And a nother sceen with a display capture source. When I switch sceen the sources also switch.Keep in mind, it is only sources that switches. Not your settings, At least that is what I think, I will look into that one.How to make a new sceen.To make a new sceen in OBS you need to be on your sceen name. If you have not messed with that before it will be named sceen one.From here press the aplications key and open the context menu.Now press add, and name it what ever you want.Now you have a basic sceen with no source. Lets fix that.To add a source to a sceen go to the sceen you just created and press tab.It will sound like nothing happend, but just press the aplications key and then press add.Now you are in the source selecter, here you can move around with errows, or tab.The sources that you can add are as folows:Audio input captureAudio output captureBrowserCollor-sourceDisplay captureGame capture **that is not the same as display capture**ImageImage slide showmedia sourceSceen **I do not know why you would do that**Text (GDI+)VLC video sourceVideo capture deviceWindow captureGroupDeprecatedKeep in mind when adding a source it will be shown in a list.If you want to capture moltiple things, for instance a game, and some custom text you can add by using the text source.You need to have the display or game capture source at the botom of the list.Everything that is over that will be captured.You can move items in that list by pressing the aplications key and press move.That should cover everything you will need to have a better stream.I hope this guide was helpfull, if it was please click that thumbs up button.If you want me to make more guides let me know URL: https://forum.audiogames.net/post/546711/#p546711 -- Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
Audio settings, and hot keys for OBS
Audio settings, and hot keys for OBS Hi again.If you have read my setup Guide to OBS this will come in handy for you.I will teatch you how to asine hotkeys to start recording, stop recording and do the same with stream.I will also go over how to get the best audio quality for your stream.(you should read the setup guide before reading this one)The first thing you need to do is open the settings.When you are in settings go down until you find: Output. Now press tab and switch the simple option to advanced.Now you will be in a tabcontrol. You navegate it using left arrow and right arrow. There are a bunch of settings, but for this guide we will focus on audio.Use right arrow until you find audio. Here you can ajust the track bitrate, as well as giving the track a name. When you are done with all that go back until you are in the main cattegorry options.Now go all the way down to hotkeys.Here is where things get tricky. There will be 2 edit fields that ses stopp recording, the same with streaming.The first edit field that ses stop streaming is actually start streaming. Just remember, the first one is start and second is stop.Now. Go to the editfields that you want to change and setup your hotkeys. When you are done with that press OK.Thats all for this time. I have plans to make more in the future. So stay tuned. URL: https://forum.audiogames.net/post/535940/#p535940 -- Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
Audio settings, and got keys for OBS
Audio settings, and got keys for OBS Hi again.If you have read my setup Guide to OBS this will come in handy for you.I will teatch you how to asign hotkeys to start recording, stop recording and do the same with stream.I will also go over how to get the best audio quality for your stream.(you should read the setup guide before readi9ng this one)The first thing you need to do is open the settings.When you are in settings go down until you find: Output. Now press tab and switch the simple option to advanced.Now you will be in a tabcontrol. You navegate it using left arrow and right arrow. There are a bunch of settings, but for this guide we will focus on audio.Use right arrow until you find audio. Here you can ajust the track bitrate, as well as giving the track a name. when you are done with all that go back until you are in the main cattegorry options.Now go all the way down to hotkeys.Here is where things get tricky. There will be 2 edit fields that ses stopp recording, the same with streaming.The first edit field that ses stop streaming is actually start streaming. Just remember, the first one is start and second is stop.Now. Go to the editfields that you want to change and setup your hotkeys. When you are done with that press OK.Thats all for this time. I have plans to make more in the future. So stay tuned. URL: https://forum.audiogames.net/post/535940/#p535940 -- Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
The set up guide to OBS studio
The set up guide to OBS studio Hi all.So I have goten a request for a OBS ritten guide. Well here it is.If you dont know what OBS is. It is a software that alows you to record your screen as well as your audio and you can live stream to youtube, twitch, mixer and so on. In this guide we wil focus on the basic setup so that you can have your screen and audio ready to be streamed.the first thing you need to do is download OBS studio. The reason you are not downloading OBS clasic is because it is out of date, and does not have all the newest features.Here is the link to the download page: https://obsproject.com/downloadHere you select your preferd download type and download the program.Next thing to do is install the program. If you have the installer. Just follow the on screen instructions and you will be good to go.When you have everything up and running you can open the app. When you are in there you will autematicly start in your sceen selection. There will already be a sceen for you that should be named somthing like sceen 1. To add a source to that sceen press tab one time. Then open the context menu. I use the applications key. When you are in the menu find add and press enter. Here you can use the errow keys or tab to see all the different sources. If you want to capture your screen you select display capture. When you have done that you will be asked to enter a name for the source, you can name it what ever you want. When you are done there press ok. And now you are in the display propertys. Here you can select the display to capture, if you only have one display it will be on display one. You can also capture your curser if you want that. When you are done with that press ok.Congratulations! You now have a source set up.Next thing to do is the settings. There is 2 ways to access the settings menu, but the easiest is to use the alt menu. Under file, go down untill you find settings and press enter.Now you are in the setting menu of OBS. The first categorry is genneral. You navigate the cattegorys by using the up and down errows, then tab to go into them and see the settings for eatch cattegory. The genneral is just personal preference.Now. Go one down. You should here stream. Then press tab. Under service select the platform you want to stream to. For youtube you select youtube/youtube-gaming. Then tab and select primary injest server.After that you will be in a edit field.Now you need to get your stream key.I use Youtube, so I do not know how this will work for twitch, but if you to are using youtube go to this link: https://www.youtube.com/live_dashboardHere you navigate by edit field untill you find: Streamname/key.When you find that go one down and press Reveal, then go one up and copy that line.When you are done go one down and press hide.Go back to OBS and paste the key into the edit field. You do not need to go into focus mode, just press CTRL +v. Now go back to the cattegorys and go down until you find audio.Here you can select the mic sample rate and channels, note that if you select mono your desktop audio will be in mono as well. I use a mono mic, but I set the channels to sterio.Now you can select your desktop audio device and your mic input. You can have 2 desktop devices and 4 mic inputs.And when you are done with that find OK and press it.Now you are in the main interface and you can tab around. Do that until you find start streaming. When you press that it will start streaming to youtube.I hope you found this guide helpfull. And if you want me to make more of them just let me know. URL: https://forum.audiogames.net/post/534194/#p534194 -- Audiogames-reflector mailing list Audiogames-reflector@sabahattin-gucukoglu.com https://sabahattin-gucukoglu.com/cgi-bin/mailman/listinfo/audiogames-reflector
