[Axapta-Knowledge-Village] Re: Axapta 3.0 or Axapta Project 4.0 Certification
Hi Pramod, I did my certification, in Projects, Ax3 it was a tough one, they ask alot of questions on estimations, and wip projects, time and material projects, and they also ask alot on the setup. unfortunately i dont have the soft copy of the material. Rather go for Ax 4. good luck --- In Axapta-Knowledge-Village@yahoogroups.com, samuel pramod [EMAIL PROTECTED] wrote: Hi, As I am planning to do certification in Axapta 3.0 or Axapta 4.0 Project Module, I need guidance and material from the people who have completed the certification. I am not from a partner company. Best Regards Pramod - Now that's room service! Choose from over 150,000 hotels in 45,000 destinations on Yahoo! Travel to find your fit. [Non-text portions of this message have been removed]
Re: [Axapta-Knowledge-Village] Remainder cost value on warehouse
Before change, The client was using weighted avg. per warehouse/batch number. After change, The client now uses weighted avg date. per warehouse/serial number. The batch number dimension is discontinued. The stock was cleared out on the 01/05/2006 and brought back in on the same day, A stock close was not done until the end of the month. Not running a stock close after removing the stock have caused the problem? How do we correct the values? The newer transactions are matched correctly and do not have any values on them. The reason why they switched inventory model groups is because the adjustments were too large and unexplainable.The intial setup was incorrect. After the changes to the setup were made things are looking much better. The open values on the old transactions however needs to be cleared. Thanks again for all your help - Original Message From: James Flavell [EMAIL PROTECTED] To: Axapta-Knowledge-Village@yahoogroups.com Sent: Friday, February 9, 2007 4:28:52 PM Subject: RE: [Axapta-Knowledge-Village] Remainder cost value on warehouse Without knowing what the BEFORE and AFTER setting are it is not really possible to say how to fix. Before used batch, after still used batch but added serial number? OR batch number longer used/active? To be honest you say you cleared out the stock with a stock journal and then brought in new stock with serial number. I assume you did an inventory close in between doing these two steps right? Maybe you can post the exact steps you did plus the dimension settings before and after, e.g. 1) Clear out stock 2) Closing 3) Deactivate batch dimension 4) Enable serial 5) Bring in stock I think your stock was not cleared out (could be due to several reasons) but it could be something else also...need more info -Original Message- From: Axapta-Knowledge- [EMAIL PROTECTED] ups.com [mailto:Axapta-Knowledge- [EMAIL PROTECTED] ups.com] On Behalf Of Anisha Fakir Sent: 09 February 2007 18:55 To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com Subject: Re: [Axapta-Knowledge- Village] Remainder cost value on warehouse One more thing, the value is sitting on the old transactions. The transactions with the batch numbers. After the setup changes occurred this issue does not appear on the serial transactions. How do I get rid of the values on the old transactions? Regards, Anisha - Original Message From: James Flavell [EMAIL PROTECTED] com To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com Sent: Friday, February 9, 2007 12:04:38 PM Subject: RE: [Axapta-Knowledge- Village] Remainder cost value on warehouse What were you inventory dimensions settings before (batch) and after (with serial) Things like 'Physical invent' and 'Financial Invent'. Also 'Allow blank' You model is Avg? FIFO? Did you take out all the stock when you switched to serial number? Or did you edit dimensions and add serial number to existing transactions? Or did you just leave transaction with blank serial? Thanks James -Original Message- From: Axapta-Knowledge- [EMAIL PROTECTED] ups.com [mailto:Axapta- Knowledge- [EMAIL PROTECTED] ups.com] On Behalf Of anishafakir1 Sent: 09 February 2007 17:52 To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com Subject: [Axapta-Knowledge- Village] Remainder cost value on warehouse Hi, Can anyone please help in providing a workaround in solving this problem, The scenario, An item was initially set up to use batch numbers. Many transactions and inventory closings were made against this item. Months later the item's dimension is changed to use serial numbers, hence the batch number functionality is turned off. Transactions are then made against this item (with serial number). When an inventory close is done, the item has a cost value with no quantity. This is shown on the Physical inventory by inventory dimension report. How can we remove this value? We tried to do an inventory adjustment but the inventory closing reverse's the value back. Any ideas? Thanking you in advance. Sharing the knowledge on Axapta. Visit www.frappr.com/ axapta for axapta friends. Come and choose your preferred name for Microsoft Dynamics AX on the Axapta Knowledge Village, Visit www.axapta-knowledg e-village. tk Yahoo! Groups Links _ _ _ _ _ _ We won't tell. Get more on shows you hate to love (and love to hate): Yahoo! TV's Guilty Pleasures list. http://tv.yahoo. com/collections/ 265 [Non-text portions of this message have been removed] Sharing the knowledge on Axapta. Visit www.frappr.com/ axapta for axapta friends. Come and choose your preferred name for Microsoft Dynamics AX on the Axapta Knowledge Village, Visit www.axapta-knowledg e-village. tk Yahoo! Groups Links The fish are biting. Get more visitors on your site using Yahoo! Search Marketing.
[Axapta-Knowledge-Village] Re: Axapta 3.0 or Axapta Project 4.0 Certification
Hi Pramod, I did my certification, in Projects, Ax3 it was a tough one, they ask alot of questions on estimations, and wip projects, time and material projects, and they also ask alot on the setup. unfortunately i dont have the soft copy of the material. Rather go for Ax 4. good luck --- In Axapta-Knowledge-Village@yahoogroups.com, samuel pramod [EMAIL PROTECTED] wrote: Hi, As I am planning to do certification in Axapta 3.0 or Axapta 4.0 Project Module, I need guidance and material from the people who have completed the certification. I am not from a partner company. Best Regards Pramod - Now that's room service! Choose from over 150,000 hotels in 45,000 destinations on Yahoo! Travel to find your fit. [Non-text portions of this message have been removed]
Re: Re: Re: [Axapta-Knowledge-Village] How to read data from weighing instrument?SOS!!!
You are most welcome. Please let me know if you have any problem. Regards, Varden Morris 85 Saddleland Close N.E. Calgary, Alberta T3J 5J5 Canada (403) 366-8434 (H) (403) 615-1604 (C) [EMAIL PROTECTED] - Original Message From: [EMAIL PROTECTED] [EMAIL PROTECTED] To: [EMAIL PROTECTED] Axapta-Knowledge-Village@yahoogroups.com; [EMAIL PROTECTED] Axapta-Knowledge-Village@yahoogroups.com Sent: Sunday, February 11, 2007 5:57:51 PM Subject: Re: Re: Re: [Axapta-Knowledge-Village] How to read data from weighing instrument?SOS!!! HI, Morris, Thank you very much! I will try to use it in ax. In fact i know how to call com port in VB, but i am not sure how to handdle it in ax. andy. [EMAIL PROTECTED] 2007-02-12 发件人： Varden Morris 发送时间： 2007-02-10 13:28:26 收件人： Axapta-Knowledge- [EMAIL PROTECTED] ups.com 抄送： 主题： Re: Re: [Axapta-Knowledge- Village] How to read data from weighing instrument?SOS! !! Hi Buddy, Do a search on ActiveX in the Developer's Guide. There is a section that shows you how to add an ActiveX control to a form. The next thing you should do is look for sample code that shows you how to use the MSCOMM control. This is available in VB6 and you may look at this link http://www.microsof t.com/downloads/ details.aspx? familyid= 01efe663- e0ff-4147- aa8b-ab9549605ea 2displaylang= en. Once you understand the VB6 code you should have a head start to do what you would like to do in X++. In VB6 you set a property value of the ActiveX control as follows: MSCOMM.ComPort = 1 But remember that the comparable code in X++ whould be: MSCOMM.ComPort( 1); This is important to know because it may frustrate you if you forget that X++ uses function calls to set and get property values of a variable in an object, as a result of the encapsulation of variables in the object. Hope this gives you a kick start. One final thing, in order for you to trigger the value from the scale on the comport you should output an end-of-line character to the port. This will trigger the OnEvent method/event of the ActiveX control, where you should read the value. Regards, Varden Morris 85 Saddleland Close N.E. Calgary, Alberta T3J 5J5 Canada (403) 366-8434 (H) (403) 615-1604 (C) [EMAIL PROTECTED] com - Original Message From: [EMAIL PROTECTED] [EMAIL PROTECTED] To: Axapta-Knowledge- [EMAIL PROTECTED] Axapta-Knowledge- [EMAIL PROTECTED] ups.com; Axapta-Knowledge- [EMAIL PROTECTED] Axapta-Knowledge- [EMAIL PROTECTED] ups.com Sent: Thursday, February 8, 2007 5:29:36 PM Subject: Re: Re: [Axapta-Knowledge- Village] How to read data from weighing instrument?SOS! !! HI,Morris yes,i want to use MSCOM activeX to read data from the COM port, but could you tell me how to call MSCOM ActiveX in axapta? thank you very much. [EMAIL PROTECTED] 2007-02-09 发件人： Varden Morris 发送时间： 2007-02-07 00:41:16 收件人： Axapta-Knowledge- [EMAIL PROTECTED] ups.com 抄送： 主题： Re: [Axapta-Knowledge- Village] How to read data from weighing instrument?SOS! !! You can use the MSCOM activeX control to read data from the COM port of the computer where the scale is connected. If you are using Citrix or Terminal Server to launch the AX client you can configure them to map the client computer port, instead of the Citrix or Terminal Server, to the AX client. Regards, Varden Morris 85 Saddleland Close N.E. Calgary, Alberta T3J 5J5 Canada (403) 366-8434 (H) (403) 615-1604 (C) [EMAIL PROTECTED] com - Original Message From: [EMAIL PROTECTED] [EMAIL PROTECTED] To: Axapta-Knowledge- Village Axapta-Knowledge- [EMAIL PROTECTED] ups.com Sent: Monday, February 5, 2007 5:58:00 PM Subject: [Axapta-Knowledge- Village] How to read data from weighing instrument?SOS! !! Dear all I want to read data from weighting instrumnet to Axapta, do you have any souce code or expirement or suggestion?? ? thanks you very much!!! -- qhpeng 2007-02-06 _ _ _ _ _ _ Be a PS3 game guru. Get your game face on with the latest PS3 news and previews at Yahoo! Games. http://videogames. yahoo.com/ platform? platform= 120121 [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] _ _ _ _ _ _ Never miss an email again! Yahoo! Toolbar alerts you the instant new Mail arrives. http://tools. search.yahoo. com/toolbar/ features/ mail/ [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] Any questions? Get answers on any topic at www.Answers.yahoo.com. Try it now. [Non-text portions of this message have been removed]
[Axapta-Knowledge-Village] Re: help me - batch process
Create windows service to run the batch group. Refer to this article (http://axaptabuilder.blogspot.com/2006/04/how-to-setup-axapta-batch- server.html) for the deails and How-To. The article is written for version 3.0 but i've tried it for version 4 and it worked. --- In Axapta-Knowledge-Village@yahoogroups.com, vijay karthik [EMAIL PROTECTED] wrote: Hi, i created a batch job in Dyanmics Ax 4.0. it has working fine, when i run the batch process in Basic - Periodic - Batch - processing . but i want to run the batch process as a seperate service.i mean that, how to run the batch job with out user interaction / do not open the axapta session. help me Thanks Regards, vijay karthik.k Send instant messages to your online friends http://uk.messenger.yahoo.com [Non-text portions of this message have been removed]
[Axapta-Knowledge-Village] Informing return to warehouse dept
Hello , Wanna know how to inform the warehouse dept if there is any return from purchase /Sales dept in Axapta 4.0. Regards Asmita
[Axapta-Knowledge-Village] Can't Open Dynamics AX 4.0 AOT Project.
Hi Group, I have got one of my Client's License. I have uploaded into Dynamics AX 4.0 then Synchronize the Tables. But still AOT Project are grayed out. Not accessible. Is there any seperate License code for Development. Please Let me know. Regards, A.Imthiyaz Ahamed Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail beta. http://new.mail.yahoo.com [Non-text portions of this message have been removed]
AW: [Axapta-Knowledge-Village] Can't Open Dynamics AX 4.0 AOT Project.
Of course there is a separate license for develoment - or even two: one for MorphX and one for X++ sorce code. So if your customer didn't buy them, there is no development with this license ;-) Tobias Von: Axapta-Knowledge-Village@yahoogroups.com im Auftrag von Imthiyaz Ahamed Gesendet: So 11.02.2007 14:52 An: Axapta-Knowledge-Village@yahoogroups.com Betreff: [Axapta-Knowledge-Village] Can't Open Dynamics AX 4.0 AOT Project. Hi Group, I have got one of my Client's License. I have uploaded into Dynamics AX 4.0 then Synchronize the Tables. But still AOT Project are grayed out. Not accessible. Is there any seperate License code for Development. Please Let me know. Regards, A.Imthiyaz Ahamed __ Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail beta. http://new.mail.yahoo.com http://new.mail.yahoo.com [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
[Axapta-Knowledge-Village] Re: Can't Open Dynamics AX 4.0 AOT Project.
You need atleast MorphX licence to be able to open the AOT. You shoud also check the user security to make sure it has Developement security key enabled. Steeve... --- In Axapta-Knowledge-Village@yahoogroups.com, Andrae, Tobias [EMAIL PROTECTED] wrote: Of course there is a separate license for develoment - or even two: one for MorphX and one for X++ sorce code. So if your customer didn't buy them, there is no development with this license ;-) Tobias Von: Axapta-Knowledge-Village@yahoogroups.com im Auftrag von Imthiyaz Ahamed Gesendet: So 11.02.2007 14:52 An: Axapta-Knowledge-Village@yahoogroups.com Betreff: [Axapta-Knowledge-Village] Can't Open Dynamics AX 4.0 AOT Project. Hi Group, I have got one of my Client's License. I have uploaded into Dynamics AX 4.0 then Synchronize the Tables. But still AOT Project are grayed out. Not accessible. Is there any seperate License code for Development. Please Let me know. Regards, A.Imthiyaz Ahamed __ Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail beta. http://new.mail.yahoo.com http://new.mail.yahoo.com [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
[Axapta-Knowledge-Village] Axapta training
EMPORIS ACADEMY WEB SITE IS www.emporiserp.com. pl go through it. regards ashwathi
