Look at Reqcalc-covCodeQty, use date of _issue to determine whether to use min-max or just min qty
Regards Harry From: Axapta-Knowledge-Village@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of varsityblews Sent: Friday, February 02, 2007 6:46 PM To: Axapta-Knowledge-Village@yahoogroups.com Subject: [Axapta-Knowledge-Village] Master Planning Requirement Hi all One of our clients requires the following. For the first half of the month they want the master planning to plan a purchase order using the min/max levels ie. create a requirement for the maximum quantity if stock goes below minimum, which is fine. But what they also want is in the second half of the month the plan should create a planned order only for the minimum quantity. As far as I know Axapta doesnt do this. I have tried to add 2 item coverage lines, each linked to a different coverage group as shown below: WH Min Max Coverage Group X 40 85 First Half X 40 40 Second Half The problem with this firstly, is that AX doesnt allow you to add a coverge for the same warehouse twice, so i put it into different warehouses just to see. I then set default coverage on MRP Parameters to First Half (the item has a blank coverage in item master at this point). When i ran the plan it created 2 lines, one for 85 and one for 40. Does anyone have any ideas on how to achieve this. Your help would really be appreciated. Regards Pragashnee [Non-text portions of this message have been removed]