Re: [Axapta-Knowledge-Village] Problem occured during Master planning
Hi Ashwani, Tahnks a lot for respoding back.I will check then revrt back to you. Regards NBSingh - Original Message From: ASHWANI JAIN [EMAIL PROTECTED] To: [EMAIL PROTECTED]; Axapta-Knowledge-Village@yahoogroups.com Sent: Friday, 29 August, 2008 6:52:36 PM Subject: Re: [Axapta-Knowledge-Village] Problem occured during Master planning As mentioned by you, demand is generated in same warehouse where the stock is available. please check another setup at following areas: 1. Master plan which you are executing -- General tab -- See if the ONhand Check box is unticked. If so, then system never consider the onhand stock of the item during planning and here is your solution. 2. If not as above (found that Check box is ticked), then go to planned order screen and select this planned order. See the pegging, this pegging shows the requirement (demand), against which this planned order is created. and also see the requirement profile of this item, wherein system show you complete planning cycle of this item. Perhaps this requirement profile will clarify you problem. Perhaps this will resolve your problem. In case you still face problem, let me know. Thanks, Ashwani Jain - Original Message From: narendra singh narendra_srf@ yahoo.co. in To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com Sent: Wednesday, 27 August, 2008 4:51:05 PM Subject: Re: [Axapta-Knowledge- Village] Problem occured during Master planning Dear Ashwani, Tahnks for your reply.As per your reply Stock is available in MW warehouse and Demand is generating in MW warehouse. Please provide a solution.Can you provide ur cell number also. Awaiting your response. Regards NBSingh 9910365709 - Original Message From: ASHWANI JAIN [EMAIL PROTECTED] com To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com; narendra_srf@ yahoo.co. in Sent: Sunday, 24 August, 2008 9:24:19 AM Subject: Re: [Axapta-Knowledge- Village] Problem occured during Master planning Hi Narender, Whether this requirement is generated warehouse wise? Can u please check, in which warehouse stock is available and in which warehouse demand is there? Waiting for your reply, based on which i can propose resolution. Thanks, Ashwani Jain - Original Message From: visti Sethna [EMAIL PROTECTED] com To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com Sent: Saturday, 23 August, 2008 7:46:31 AM Subject: Re: [Axapta-Knowledge- Village] Problem occured during Master planning Dear NB When the orders are getting generated, go to inquiries and check the net requirements. You will mostly observev that the orders are getting generated due to the stock being insufficient to satisfy the entire demand for that particular item. Also go to the item master = Quantity Tab and check the multiples min order set for that item under inventory and purchase. Mostly i feel that : Total Demand = 170 Onhand = 125 thus Net Reqd = 45 (Total Demand - Onhand) Min order Qty = 150 Multiples = 25 Order Generated = 175 Check this out, it will solve your problem Regards Vishtaspa On Fri, Aug 22, 2008 at 12:01 PM, narendra singh narendra_srf@ yahoo.co. in wrote: All items are affecting Regards nbsingh 9910365709 - Original Message From: Harry Deshpande [EMAIL PROTECTED] com To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com Axapta-Knowledge- [EMAIL PROTECTED] ups.com Sent: Thursday, 21 August, 2008 10:46:08 PM Subject: RE: [Axapta-Knowledge- Village] Problem occured during Master planning Are all items getting affected by this problem or just a subset? Regards Harry Deshpande http://blogs. msdn.com/ axperf From:Axapta-Knowledge- [EMAIL PROTECTED] ups.com [mailto:Axapta- Knowledge- [EMAIL PROTECTED] ups.com] On Behalf Of narendra singh Sent: Thursday, August 21, 2008 4:30 AM To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com Subject: [Axapta-Knowledge- Village] Problem occured during Master planning Hi Friends, Can anyone of you help me.I am facing a problem during running master planning in Ax4.0 sp2. Although on hand inventory is available before running master planning,but after running Master planning it is again generating requirement. I have checked all setup but unable to find out the problem.It is urgent. Thanks Regards NBSingh 9910365709 Unlimited freedom, unlimited storage. Get it now, on http://help. yahoo.com/ l/in/yahoo/ mail/yahoomail/ tools/tools- 08.html/ Add more friends to your messenger and enjoy! Invite them now. -- With Regards, Mr. Vishtaspa Sethna Associate E.R.P. Consultant Godrej Infotech Ltd. Cell: +919718010823 Connect with friends all over the world. Get Yahoo! India Messenger. Unlimited freedom, unlimited storage. Get it now Add more friends to your messenger and enjoy! Invite them now. Cricket on your mind? Visit the ultimate cricket website
Re: [Axapta-Knowledge-Village] Problem occured during Master planning
As mentioned by you, demand is generated in same warehouse where the stock is available. please check another setup at following areas: 1. Master plan which you are executing -- General tab -- See if the ONhand Check box is unticked. If so, then system never consider the onhand stock of the item during planning and here is your solution. 2. If not as above (found that Check box is ticked), then go to planned order screen and select this planned order. See the pegging, this pegging shows the requirement (demand), against which this planned order is created. and also see the requirement profile of this item, wherein system show you complete planning cycle of this item. Perhaps this requirement profile will clarify you problem. Perhaps this will resolve your problem. In case you still face problem, let me know. Thanks, Ashwani Jain - Original Message From: narendra singh [EMAIL PROTECTED] To: Axapta-Knowledge-Village@yahoogroups.com Sent: Wednesday, 27 August, 2008 4:51:05 PM Subject: Re: [Axapta-Knowledge-Village] Problem occured during Master planning Dear Ashwani, Tahnks for your reply.As per your reply Stock is available in MW warehouse and Demand is generating in MW warehouse. Please provide a solution.Can you provide ur cell number also. Awaiting your response. Regards NBSingh 9910365709 - Original Message From: ASHWANI JAIN [EMAIL PROTECTED] com To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com; narendra_srf@ yahoo.co. in Sent: Sunday, 24 August, 2008 9:24:19 AM Subject: Re: [Axapta-Knowledge- Village] Problem occured during Master planning Hi Narender, Whether this requirement is generated warehouse wise? Can u please check, in which warehouse stock is available and in which warehouse demand is there? Waiting for your reply, based on which i can propose resolution. Thanks, Ashwani Jain - Original Message From: visti Sethna [EMAIL PROTECTED] com To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com Sent: Saturday, 23 August, 2008 7:46:31 AM Subject: Re: [Axapta-Knowledge- Village] Problem occured during Master planning Dear NB When the orders are getting generated, go to inquiries and check the net requirements. You will mostly observev that the orders are getting generated due to the stock being insufficient to satisfy the entire demand for that particular item. Also go to the item master = Quantity Tab and check the multiples min order set for that item under inventory and purchase. Mostly i feel that : Total Demand = 170 Onhand = 125 thus Net Reqd = 45 (Total Demand - Onhand) Min order Qty = 150 Multiples = 25 Order Generated = 175 Check this out, it will solve your problem Regards Vishtaspa On Fri, Aug 22, 2008 at 12:01 PM, narendra singh narendra_srf@ yahoo.co. in wrote: All items are affecting Regards nbsingh 9910365709 - Original Message From: Harry Deshpande [EMAIL PROTECTED] com To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com Axapta-Knowledge- [EMAIL PROTECTED] ups.com Sent: Thursday, 21 August, 2008 10:46:08 PM Subject: RE: [Axapta-Knowledge- Village] Problem occured during Master planning Are all items getting affected by this problem or just a subset? Regards Harry Deshpande http://blogs. msdn.com/ axperf From:Axapta-Knowledge- [EMAIL PROTECTED] ups.com [mailto:Axapta- Knowledge- [EMAIL PROTECTED] ups.com] On Behalf Of narendra singh Sent: Thursday, August 21, 2008 4:30 AM To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com Subject: [Axapta-Knowledge- Village] Problem occured during Master planning Hi Friends, Can anyone of you help me.I am facing a problem during running master planning in Ax4.0 sp2. Although on hand inventory is available before running master planning,but after running Master planning it is again generating requirement. I have checked all setup but unable to find out the problem.It is urgent. Thanks Regards NBSingh 9910365709 Unlimited freedom, unlimited storage. Get it now, on http://help. yahoo.com/ l/in/yahoo/ mail/yahoomail/ tools/tools- 08.html/ Add more friends to your messenger and enjoy! Invite them now. -- With Regards, Mr. Vishtaspa Sethna Associate E.R.P. Consultant Godrej Infotech Ltd. Cell: +919718010823 Connect with friends all over the world. Get Yahoo! India Messenger. Unlimited freedom, unlimited storage. Get it now Unlimited freedom, unlimited storage. Get it now, on http://help.yahoo.com/l/in/yahoo/mail/yahoomail/tools/tools-08.html/
Re: [Axapta-Knowledge-Village] Problem occured during Master planning
Dear Ashwani, Tahnks for your reply.As per your reply Stock is available in MW warehouse and Demand is generating in MW warehouse. Please provide a solution.Can you provide ur cell number also. Awaiting your response. Regards NBSingh 9910365709 - Original Message From: ASHWANI JAIN [EMAIL PROTECTED] To: Axapta-Knowledge-Village@yahoogroups.com; [EMAIL PROTECTED] Sent: Sunday, 24 August, 2008 9:24:19 AM Subject: Re: [Axapta-Knowledge-Village] Problem occured during Master planning Hi Narender, Whether this requirement is generated warehouse wise? Can u please check, in which warehouse stock is available and in which warehouse demand is there? Waiting for your reply, based on which i can propose resolution. Thanks, Ashwani Jain - Original Message From: visti Sethna [EMAIL PROTECTED] com To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com Sent: Saturday, 23 August, 2008 7:46:31 AM Subject: Re: [Axapta-Knowledge- Village] Problem occured during Master planning Dear NB When the orders are getting generated, go to inquiries and check the net requirements. You will mostly observev that the orders are getting generated due to the stock being insufficient to satisfy the entire demand for that particular item. Also go to the item master = Quantity Tab and check the multiples min order set for that item under inventory and purchase. Mostly i feel that : Total Demand = 170 Onhand = 125 thus Net Reqd = 45 (Total Demand - Onhand) Min order Qty = 150 Multiples = 25 Order Generated = 175 Check this out, it will solve your problem Regards Vishtaspa On Fri, Aug 22, 2008 at 12:01 PM, narendra singh narendra_srf@ yahoo.co. in wrote: All items are affecting Regards nbsingh 9910365709 - Original Message From: Harry Deshpande [EMAIL PROTECTED] com To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com Axapta-Knowledge- [EMAIL PROTECTED] ups.com Sent: Thursday, 21 August, 2008 10:46:08 PM Subject: RE: [Axapta-Knowledge- Village] Problem occured during Master planning Are all items getting affected by this problem or just a subset? Regards Harry Deshpande http://blogs. msdn.com/ axperf From:Axapta-Knowledge- [EMAIL PROTECTED] ups.com [mailto:Axapta- Knowledge- [EMAIL PROTECTED] ups.com] On Behalf Of narendra singh Sent: Thursday, August 21, 2008 4:30 AM To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com Subject: [Axapta-Knowledge- Village] Problem occured during Master planning Hi Friends, Can anyone of you help me.I am facing a problem during running master planning in Ax4.0 sp2. Although on hand inventory is available before running master planning,but after running Master planning it is again generating requirement. I have checked all setup but unable to find out the problem.It is urgent. Thanks Regards NBSingh 9910365709 Unlimited freedom, unlimited storage. Get it now, on http://help. yahoo.com/ l/in/yahoo/ mail/yahoomail/ tools/tools- 08.html/ Add more friends to your messenger and enjoy! Invite them now. -- With Regards, Mr. Vishtaspa Sethna Associate E.R.P. Consultant Godrej Infotech Ltd. Cell: +919718010823 Connect with friends all over the world. Get Yahoo! India Messenger. Unlimited freedom, unlimited storage. Get it now, on http://help.yahoo.com/l/in/yahoo/mail/yahoomail/tools/tools-08.html/
RE: [Axapta-Knowledge-Village] Problem occured during Master planning
Check positive days also try turning off futures and action messages Regards Harry From: Axapta-Knowledge-Village@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of narendra singh Sent: Wednesday, August 27, 2008 4:21 AM To: Axapta-Knowledge-Village@yahoogroups.com Subject: Re: [Axapta-Knowledge-Village] Problem occured during Master planning Dear Ashwani, Tahnks for your reply.As per your reply Stock is available in MW warehouse and Demand is generating in MW warehouse. Please provide a solution.Can you provide ur cell number also. Awaiting your response. Regards NBSingh 9910365709 - Original Message From: ASHWANI JAIN [EMAIL PROTECTED] To: Axapta-Knowledge-Village@yahoogroups.com; [EMAIL PROTECTED] Sent: Sunday, 24 August, 2008 9:24:19 AM Subject: Re: [Axapta-Knowledge-Village] Problem occured during Master planning Hi Narender, Whether this requirement is generated warehouse wise? Can u please check, in which warehouse stock is available and in which warehouse demand is there? Waiting for your reply, based on which i can propose resolution. Thanks, Ashwani Jain - Original Message From: visti Sethna [EMAIL PROTECTED] com To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com Sent: Saturday, 23 August, 2008 7:46:31 AM Subject: Re: [Axapta-Knowledge- Village] Problem occured during Master planning Dear NB When the orders are getting generated, go to inquiries and check the net requirements. You will mostly observev that the orders are getting generated due to the stock being insufficient to satisfy the entire demand for that particular item. Also go to the item master = Quantity Tab and check the multiples min order set for that item under inventory and purchase. Mostly i feel that : Total Demand = 170 Onhand = 125 thus Net Reqd = 45 (Total Demand - Onhand) Min order Qty = 150 Multiples = 25 Order Generated = 175 Check this out, it will solve your problem Regards Vishtaspa On Fri, Aug 22, 2008 at 12:01 PM, narendra singh narendra_srf@ yahoo.co. inmailto:[EMAIL PROTECTED] wrote: All items are affecting Regards nbsingh 9910365709 - Original Message From: Harry Deshpande [EMAIL PROTECTED] commailto:[EMAIL PROTECTED] To: Axapta-Knowledge- [EMAIL PROTECTED] ups.commailto:Axapta-Knowledge-Village@yahoogroups.com Axapta-Knowledge- [EMAIL PROTECTED] ups.commailto:Axapta-Knowledge-Village@yahoogroups.com Sent: Thursday, 21 August, 2008 10:46:08 PM Subject: RE: [Axapta-Knowledge- Village] Problem occured during Master planning Are all items getting affected by this problem or just a subset? Regards Harry Deshpande http://blogs. msdn.com/ axperfhttp://blogs.msdn.com/axperf From: Axapta-Knowledge- [EMAIL PROTECTED] ups.comhttp://ups.com/ [mailto:Axapta-mailto:Axapta- Knowledge- [EMAIL PROTECTED] ups.comhttp://ups.com/] On Behalf Of narendra singh Sent: Thursday, August 21, 2008 4:30 AM To: Axapta-Knowledge- [EMAIL PROTECTED] ups.comhttp://ups.com/ Subject: [Axapta-Knowledge- Village] Problem occured during Master planning Hi Friends, Can anyone of you help me.I am facing a problem during running master planning in Ax4.0 sp2. Although on hand inventory is available before running master planning,but after running Master planning it is again generating requirement. I have checked all setup but unable to find out the problem.It is urgent. Thanks Regards NBSingh 9910365709 Unlimited freedom, unlimited storage. Get it now, on http://help. yahoo.com/ l/in/yahoo/ mail/yahoomail/ tools/tools- 08.html/http://help.yahoo.com/l/in/yahoo/mail/yahoomail/tools/tools-08.html/ Add more friends to your messenger and enjoy! Invite them now.http://in.rd.yahoo.com/tagline_messenger_6/*http:/in.messenger.yahoo.com/invite/ -- With Regards, Mr. Vishtaspa Sethna Associate E.R.P. Consultant Godrej Infotech Ltd. Cell: +919718010823 Connect with friends all over the world. Get Yahoo! India Messenger.http://in.rd.yahoo.com/tagline_messenger_1/*http:/in.messenger.yahoo.com/?wm=n/ Unlimited freedom, unlimited storage. Get it nowhttp://in.rd.yahoo.com/tagline_mail_2/*http:/help.yahoo.com/l/in/yahoo/mail/yahoomail/tools/tools-08.html/
Re: [Axapta-Knowledge-Village] Problem occured during Master planning
Hi Narender, Whether this requirement is generated warehouse wise? Can u please check, in which warehouse stock is available and in which warehouse demand is there? Waiting for your reply, based on which i can propose resolution. Thanks, Ashwani Jain - Original Message From: visti Sethna [EMAIL PROTECTED] To: Axapta-Knowledge-Village@yahoogroups.com Sent: Saturday, 23 August, 2008 7:46:31 AM Subject: Re: [Axapta-Knowledge-Village] Problem occured during Master planning Dear NB When the orders are getting generated, go to inquiries and check the net requirements. You will mostly observev that the orders are getting generated due to the stock being insufficient to satisfy the entire demand for that particular item. Also go to the item master = Quantity Tab and check the multiples min order set for that item under inventory and purchase. Mostly i feel that : Total Demand = 170 Onhand = 125 thus Net Reqd = 45 (Total Demand - Onhand) Min order Qty = 150 Multiples = 25 Order Generated = 175 Check this out, it will solve your problem Regards Vishtaspa On Fri, Aug 22, 2008 at 12:01 PM, narendra singh narendra_srf@ yahoo.co. in wrote: All items are affecting Regards nbsingh 9910365709 - Original Message From: Harry Deshpande [EMAIL PROTECTED] com To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com Axapta-Knowledge- [EMAIL PROTECTED] ups.com Sent: Thursday, 21 August, 2008 10:46:08 PM Subject: RE: [Axapta-Knowledge- Village] Problem occured during Master planning Are all items getting affected by this problem or just a subset? Regards Harry Deshpande http://blogs. msdn.com/ axperf From:Axapta-Knowledge- [EMAIL PROTECTED] ups.com [mailto:Axapta- Knowledge- [EMAIL PROTECTED] ups.com] On Behalf Of narendra singh Sent: Thursday, August 21, 2008 4:30 AM To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com Subject: [Axapta-Knowledge- Village] Problem occured during Master planning Hi Friends, Can anyone of you help me.I am facing a problem during running master planning in Ax4.0 sp2. Although on hand inventory is available before running master planning,but after running Master planning it is again generating requirement. I have checked all setup but unable to find out the problem.It is urgent. Thanks Regards NBSingh 9910365709 Unlimited freedom, unlimited storage. Get it now, on http://help. yahoo.com/ l/in/yahoo/ mail/yahoomail/ tools/tools- 08.html/ Add more friends to your messenger and enjoy! Invite them now. -- With Regards, Mr. Vishtaspa Sethna Associate E.R.P. Consultant Godrej Infotech Ltd. Cell: +919718010823 Connect with friends all over the world. Get Yahoo! India Messenger at http://in.messenger.yahoo.com/?wm=n/
RE: [Axapta-Knowledge-Village] Problem occured during Master planning
Can you confirm that the ‘on hand inventories’ check box is turned on Regards harry From: Axapta-Knowledge-Village@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of narendra singh Sent: Thursday, August 21, 2008 11:32 PM To: Axapta-Knowledge-Village@yahoogroups.com Subject: Re: [Axapta-Knowledge-Village] Problem occured during Master planning All items are affecting Regards nbsingh 9910365709 - Original Message From: Harry Deshpande [EMAIL PROTECTED] To: Axapta-Knowledge-Village@yahoogroups.com Axapta-Knowledge-Village@yahoogroups.com Sent: Thursday, 21 August, 2008 10:46:08 PM Subject: RE: [Axapta-Knowledge-Village] Problem occured during Master planning Are all items getting affected by this problem or just a subset? Regards Harry Deshpande http://blogs. msdn.com/ axperfhttp://blogs.msdn.com/axperf From: Axapta-Knowledge- [EMAIL PROTECTED] ups.com [mailto:Axapta- Knowledge- [EMAIL PROTECTED] ups.com] On Behalf Of narendra singh Sent: Thursday, August 21, 2008 4:30 AM To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com Subject: [Axapta-Knowledge- Village] Problem occured during Master planning Hi Friends, Can anyone of you help me.I am facing a problem during running master planning in Ax4.0 sp2. Although on hand inventory is available before running master planning,but after running Master planning it is again generating requirement. I have checked all setup but unable to find out the problem.It is urgent. Thanks Regards NBSingh 9910365709 Unlimited freedom, unlimited storage. Get it now, on http://help. yahoo.com/ l/in/yahoo/ mail/yahoomail/ tools/tools- 08.html/http://help.yahoo.com/l/in/yahoo/mail/yahoomail/tools/tools-08.html/ Add more friends to your messenger and enjoy! Invite them now.http://in.rd.yahoo.com/tagline_messenger_6/*http:/in.messenger.yahoo.com/invite/
Re: [Axapta-Knowledge-Village] Problem occured during Master planning
Dear NB When the orders are getting generated, go to inquiries and check the net requirements. You will mostly observev that the orders are getting generated due to the stock being insufficient to satisfy the entire demand for that particular item. Also go to the item master = Quantity Tab and check the multiples min order set for that item under inventory and purchase. Mostly i feel that : Total Demand = 170 Onhand = 125 *thus Net Reqd = 45* (Total Demand - Onhand) Min order Qty = 150 Multiples = 25 Order Generated = 175 Check this out, it will solve your problem Regards Vishtaspa On Fri, Aug 22, 2008 at 12:01 PM, narendra singh [EMAIL PROTECTED]wrote: All items are affecting Regards nbsingh 9910365709 - Original Message From: Harry Deshpande [EMAIL PROTECTED] To: Axapta-Knowledge-Village@yahoogroups.com Axapta-Knowledge-Village@yahoogroups.com Sent: Thursday, 21 August, 2008 10:46:08 PM Subject: RE: [Axapta-Knowledge-Village] Problem occured during Master planning Are all items getting affected by this problem or just a subset? Regards * * *Harry Deshpande* *http://blogs. msdn.com/ axperf http://blogs.msdn.com/axperf*** *From:* Axapta-Knowledge- [EMAIL PROTECTED] ups.com [mailto:Axapta-Knowledge- [EMAIL PROTECTED] ups.com] *On Behalf Of *narendra singh *Sent:* Thursday, August 21, 2008 4:30 AM *To:* Axapta-Knowledge- [EMAIL PROTECTED] ups.com *Subject:* [Axapta-Knowledge- Village] Problem occured during Master planning Hi Friends, Can anyone of you help me.I am facing a problem during running master planning in Ax4.0 sp2. Although on hand inventory is available before running master planning,but after running Master planning it is again generating requirement. I have checked all setup but unable to find out the problem.It is urgent. Thanks Regards NBSingh 9910365709 Unlimited freedom, unlimited storage. Get it now, on http://help. yahoo.com/ l/in/yahoo/ mail/yahoomail/ tools/tools- 08.html/http://help.yahoo.com/l/in/yahoo/mail/yahoomail/tools/tools-08.html/ -- Add more friends to your messenger and enjoy! Invite them now.http://in.rd.yahoo.com/tagline_messenger_6/*http://in.messenger.yahoo.com/invite/ -- With Regards, Mr. Vishtaspa Sethna Associate E.R.P. Consultant Godrej Infotech Ltd. Cell: +919718010823
Re: [Axapta-Knowledge-Village] Problem occured during Master planning
Dear Harry, This check box is turned on On Fri, Aug 22, 2008 at 8:18 PM, Harry Deshpande [EMAIL PROTECTED]wrote: Can you confirm that the 'on hand inventories' check box is turned on Regards harry *From:* Axapta-Knowledge-Village@yahoogroups.com [mailto: [EMAIL PROTECTED] *On Behalf Of *narendra singh *Sent:* Thursday, August 21, 2008 11:32 PM *To:* Axapta-Knowledge-Village@yahoogroups.com *Subject:* Re: [Axapta-Knowledge-Village] Problem occured during Master planning All items are affecting Regards nbsingh 9910365709 - Original Message From: Harry Deshpande [EMAIL PROTECTED] To: Axapta-Knowledge-Village@yahoogroups.com Axapta-Knowledge-Village@yahoogroups.com Sent: Thursday, 21 August, 2008 10:46:08 PM Subject: RE: [Axapta-Knowledge-Village] Problem occured during Master planning Are all items getting affected by this problem or just a subset? Regards * * *Harry Deshpande* *http://blogs. msdn.com/ axperf http://blogs.msdn.com/axperf* *From:* Axapta-Knowledge- [EMAIL PROTECTED] ups.com [mailto:Axapta-Knowledge- [EMAIL PROTECTED] ups.com] *On Behalf Of *narendra singh *Sent:* Thursday, August 21, 2008 4:30 AM *To:* Axapta-Knowledge- [EMAIL PROTECTED] ups.com *Subject:* [Axapta-Knowledge- Village] Problem occured during Master planning Hi Friends, Can anyone of you help me.I am facing a problem during running master planning in Ax4.0 sp2. Although on hand inventory is available before running master planning,but after running Master planning it is again generating requirement. I have checked all setup but unable to find out the problem.It is urgent. Thanks Regards NBSingh 9910365709 Unlimited freedom, unlimited storage. Get it now, on http://help. yahoo.com/ l/in/yahoo/ mail/yahoomail/ tools/tools- 08.html/http://help.yahoo.com/l/in/yahoo/mail/yahoomail/tools/tools-08.html/ -- Add more friends to your messenger and enjoy! Invite them now.http://in.rd.yahoo.com/tagline_messenger_6/*http:/in.messenger.yahoo.com/invite/ -- With Regards, Mr. Vishtaspa Sethna Associate E.R.P. Consultant Godrej Infotech Ltd. Cell: +919718010823
RE: [Axapta-Knowledge-Village] Problem occured during Master planning
Are all items getting affected by this problem or just a subset? Regards Harry Deshpande http://blogs.msdn.com/axperf From: Axapta-Knowledge-Village@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of narendra singh Sent: Thursday, August 21, 2008 4:30 AM To: Axapta-Knowledge-Village@yahoogroups.com Subject: [Axapta-Knowledge-Village] Problem occured during Master planning Hi Friends, Can anyone of you help me.I am facing a problem during running master planning in Ax4.0 sp2. Although on hand inventory is available before running master planning,but after running Master planning it is again generating requirement.I have checked all setup but unable to find out the problem.It is urgent. Thanks Regards NBSingh 9910365709 Unlimited freedom, unlimited storage. Get it now, on http://help.yahoo.com/l/in/yahoo/mail/yahoomail/tools/tools-08.html/