Unsubscribe

[Jonathan B Joseph]

I tried to unsubscribe a few times via the website at:

http://ws.apache.org/axis2/mail-lists.html

But that doesn't seem to work.  So I thought I would try to unsubscribe
by sending a message to axis-user@ws.apache.org with the
Subject=Unsubscribe.

Jonathan

Unsubscribe

[Sudhir Mongia]

unsubscribe

[kumaresan.balasundaram]

Please do not print this email unless it is absolutely necessary. 

The information contained in this electronic message and any attachments to 
this message are intended for the exclusive use of the addressee(s) and may 
contain proprietary, confidential or privileged information. If you are not the 
intended recipient, you should not disseminate, distribute or copy this e-mail. 
Please notify the sender immediately and destroy all copies of this message and 
any attachments. 

WARNING: Computer viruses can be transmitted via email. The recipient should 
check this email and any attachments for the presence of viruses. The company 
accepts no liability for any damage caused by any virus transmitted by this 
email. 

www.wipro.com

unsubscribe

[jack nimble]

unsuscribe

Re: unsubscribe

[Darshana Jayasinghe]

Sorry if you need to unsubscribe, you need to send the mail to this address
axis-user-unsubscr...@ws.apache.org

On Mon, Feb 1, 2010 at 7:35 PM, Amol Naidu  wrote:

>
>
>   Disclaimer *
>
>
>
>
> This mail, including any attachments contains confidential and privileged
> information for the sole use of the addressee(s). If you are not the
> intended recipient,
>
> please notify the sender by e-mail and delete the original message.  Any
> unauthorized review, use, disclosure, dissemination, forwarding, printing or
> copying of
>
>  this email or any action taken in reliance on this e-mail is strictly
> prohibited and are unlawful. This e-mail may contain viruses. R Systems
> International Limited  has
>
> taken every reasonable precaution to minimize this risk.  R Systems
> International Limited is not liable for any damage you may sustain as a
> result of any virus in this e-mail.
>
> Before opening the e-mail or attachment, You should carry out your own
> virus checks. R Systems International Limited reserves the right to record,
> monitor, and inspect
>
>  all email communications through its internal and external networks.  R
> Systems International Ltd prohibits its information systems from being used
> to view, store or forward
>
> offensive or discriminatory material.
>
>
>
>  End of Disclaimer 
>
>


-- 
DÄrshana

unsubscribe

[Amol Naidu]

 

  Disclaimer *
 

 

This mail, including any attachments contains confidential and privileged 
information for the sole use of the addressee(s). If you are not the intended 
recipient, 

please notify the sender by e-mail and delete the original message.  Any 
unauthorized review, use, disclosure, dissemination, forwarding, printing or 
copying of

 this email or any action taken in reliance on this e-mail is strictly 
prohibited and are unlawful. This e-mail may contain viruses. R Systems 
International Limited  has 

taken every reasonable precaution to minimize this risk.  R Systems 
International Limited is not liable for any damage you may sustain as a result 
of any virus in this e-mail. 

Before opening the e-mail or attachment, You should carry out your own virus 
checks. R Systems International Limited reserves the right to record, monitor, 
and inspect

 all email communications through its internal and external networks.  R 
Systems International Ltd prohibits its information systems from being used to 
view, store or forward 

offensive or discriminatory material.

 

 End of Disclaimer 

Re: unsubscribe

[Andreas Veithen]

You need to send a mail to axis-user-unsubscr...@ws.apache.org

On Mon, Feb 1, 2010 at 07:54, amardeep singh khera
 wrote:
>
>

unsubscribe

[amardeep singh khera]

unsubscribe

[Kaushik Paranjape]

unsubscribe

[Anand Navale]

Thanks,
Anand Navale

Re: UNSUBSCRIBE

[Andreas Veithen]

Please send a mail to axis-user-unsubscr...@ws.apache.org

On Mon, Dec 21, 2009 at 20:34, Luke Balding  wrote:
>

UNSUBSCRIBE

[Luke Balding]

Re: unsubscribe

[m4rkuz]

I think i'm not the only one that see this user list is kind of dead(where
is nandana?)... but please do not send unsuscribe mussages to the list..
thats not the way to unsuscribe...

just send a mail to:

axis-user-unsubscr...@ws.apache.org




___
Marcus Sánchez Díaz.
Enterprise Developer.
SCJP - SCWCD.


On Thu, Nov 12, 2009 at 7:56 PM, Mary Thompson  wrote:

> yes, I want to unsubscribe
>

unsubscribe

[Mary Thompson]

yes, I want to unsubscribe

Re: unsubscribe

[Andreas Kuckartz]

Hello,

I would appreciate if those who would like to unsubscribe from mailing lists do not spam 
those mailings lists with useless "unsubscribe"-mails.

If you do not know how to unsubsribe look in the mail header:

list-help: <mailto:axis-user-h...@ws.apache.org>
list-unsubscribe: <mailto:axis-user-unsubscr...@ws.apache.org>

Thanks,
Andreas

unsubscribe

[heikki]

On Thu, Nov 12, 2009 at 2:30 AM, Rahul Rulz  wrote:

> Hi Axis2 Users,
>
> If anyone has included MULTIREF in the responses from the server,kindly let
> me know the procedures to do the same...I have created a SimpleInOut
> MessageReceiver and have created the service from scratch(not used WSDL2Java
> to create stubs)..
>
> Any suggestions/codes would be of great help.
>
> Thanks,
> Raghav.
>
>
>
> --- On *Wed, 11/11/09, Rahul Rulz * wrote:
>
>
> From: Rahul Rulz 
> Subject: Re: [Axis2] Reg. parsing of MULTIREF and including MULTIREF in
> server responses
>
> To: axis-user@ws.apache.org
> Date: Wednesday, November 11, 2009, 10:53 AM
>
> Hi Deepal,
>
> Thanks for the link. Unfortunately I was not able to get it working.. :(
>
> I just found some Axis2 api's such inside axis2.apache.databinding.utils -
> Multirefhelper and was able to get the href,attribute values from the
> incoming requests . Now I want to send the response processing the above
> values and it looks like the following
>
> 
> http://schemas.xmlsoap.org/soap/envelope/";
> xmlns:xsd="http://www.w3.org/2001/XMLSchema"; xmlns:xsi="
> http://www.w3.org/2001/XMLSchema-instance";>
> 
> 
> http://schemas.xmlsoap.org/soap/encoding/";
> xmlns:ns4="Myservice:Response">
> 
> http://schemas.xmlsoap.org/soap/encoding/"; xsi:type="ns5:Profile"
> xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"; xmlns:ns5="
> http://Myservice.services.myservice.com";>
>  xsi:type="soapenc:Array">
> 
> 
> 
> 
> http://schemas.xmlsoap.org/soap/encoding/"; xsi:type="ns6:User" xmlns:ns6="
> http://dto.domain.raa.services.myservice.com"; xmlns:soapenc="
> http://schemas.xmlsoap.org/soap/encoding/";> xsi:type="ns7:UserSegmentEnum" xsi:nil="true" xmlns:ns7="
> http://Myservice.services.myservice.com"/>
> rag...@test.com
> 
> http://schemas.xmlsoap.org/soap/encoding/"; xsi:type="ns8:ServiceNumber"
> xmlns:ns8="http://Myservice.services.myservice.com"; xmlns:soapenc="
> http://schemas.xmlsoap.org/soap/encoding/";> href="#id4"/> xsi:type="xsd:string">00 href="#id5"/>
> http://schemas.xmlsoap.org/soap/encoding/"; xsi:type="ns9:ServiceNumber"
> xmlns:ns9="http://Myservice.services.myservice.com"; xmlns:soapenc="
> http://schemas.xmlsoap.org/soap/encoding/";> href="#id7"/> xsi:type="xsd:string">01 href="#id5"/>
> http://schemas.xmlsoap.org/soap/encoding/";
> xsi:type="ns10:ServiceNumberStatusEnum" xmlns:ns10="
> http://Myservice.services.myservice.com"; xmlns:soapenc="
> http://schemas.xmlsoap.org/soap/encoding/";>TEST_ACTIVE
> http://schemas.xmlsoap.org/soap/encoding/";
> xsi:type="ns11:ServiceLinkStatusEnum" xmlns:ns11="
> http://Myservice.services.myservice.com"; xmlns:soapenc="
> http://schemas.xmlsoap.org/soap/encoding/";>TEST_LINKED
> http://schemas.xmlsoap.org/soap/encoding/";
> xsi:type="ns12:ServiceLinkStatusEnum" xmlns:ns12="
> http://Myservice.services.myservice.com"; xmlns:soapenc="
> http://schemas.xmlsoap.org/soap/encoding/";>TEST_INITIAL
> http://schemas.xmlsoap.org/soap/encoding/"; xsi:type="ns13:ServiceTypeEnum"
> xmlns:ns13="http://Myservice.services.myservice.com"; xmlns:soapenc="
> http://schemas.xmlsoap.org/soap/encoding/";>TEST_MSISDN
> 
> 
>
> I just wanted to know whether are there any APIs(such as addChild) to make
> it easier to add multirefs to the responses.
>
> Pl. share your thoughts on getting the above response..I am using a simple
> inout message receiver.
>
> Thanks for looking into it.
>
> Thanks,
> Raghav.
>
>
>
>
>
>
> --- On *Mon, 11/9/09, Deepal jayasinghe * wrote:
>
>
> From: Deepal jayasinghe 
> Subject: Re: [Axis2] Reg. parsing of MULTIREF and including MULTIREF in
> server responses
>
> To: axis-user@ws.apache.org
> Date: Monday, November 9, 2009, 9:16 AM
>
> Try this,
>
> https://svn.apache.org/repos/asf/webservices/axis2/trunk/java/modules/integration/test/org/apache/axis2/rpc/RPCCallTest.java
> > Hi Deepal,
> >
> > Thanks for the reply. I just had a look on the API's reg.
> > MultiRefHelper. I have a InOutMessageReceiver already for my
> > service.It would be great if you can share the examples(below) for
> > starters like us to explore more..
> >
> > 1. Extract Multiref values in server from incoming requests
> > 2. Create Multiref values from server as response.
> >
> >
> > Thanks,
> > Raghav.
> >
> >
> >
> >
> >
> >
> >
> >
> > --- On *Mon, 11/9/09, Deepal Jayasinghe //* wrote:
> >
> >
> > From: Deepal Jayasinghe 
> > Subject: Re: [Axis2] Reg. parsing of MULTIREF and including
> > MULTIREF in server responses
>
> > To: axis-user@ws.apache.org
> > Date: Monday, November 9, 2009, 6:07 AM
> >
> > It is yes and no answer. In the server side when we use
> > RPCMessageReceiver, it supports multiref. But in the client side I am
> > not sure whether we handle it correctly, if you can try with
> > RPCServiceClient and see whether it works. (I guess it might work, it
> > uses the same code as the RPCMR)
> >
> > Thanks,
> > Deepal
> >
> > Rahul Rulz wrote:
> > > Hi Use

unsubscribe

[Eric Isley]

unsubscribe

unsubscribe

[Misch, Oliver / Kuehne + Nagel / Ham MI-AJ]

 

Kuehne + Nagel (AG & Co.) KG, Geschaeftsleitung: Hans-Georg Brinkmann (Vors.), 
Dirk Blesius (Stellv.), Reiner Heiken (Stellv.), Bruno Mang, Alfred Manke, 
Christian Marnetté (Stellv.), Mark Reinhardt (Stellv.), Jens Wollesen, Rainer 
Wunn, Sitz: Bremen, Registergericht: Bremen, HRA 21928, USt-IdNr.: DE 
812773878, Persoenlich haftende Gesellschaft: Kuehne & Nagel A.G., Sitz: 
Contern/Luxemburg Geschaeftsfuehrender Verwaltungsrat: Klaus-Michael Kuehne

unsubscribe

[Kaushik Paranjape]

unsubscribe

[arif.shaon]

 

 

From: John Francis [mailto:jfran...@his.co.uk] 
Sent: 10 November 2009 12:14
To: axis-user@ws.apache.org
Subject: Problem with compilation of Axis2

 

Does the axis2-1.4.1 src build work? With what version of maven?

If it does what am I doing wrong?

 

Thanks, details follow...

 

I am developing with axis2-1.4.1 in order to use Eclipse axis plugins. (
I de3installed 1.5.1 )

I am building on Windows Server 2008 x64.

I am trying to build the axis2-1.4 source release ( outside of Eclipse )
using maven.

I had problems with the latest release of maven so moved to
apache-maven-2.0.10, as another post recommended this.

I am still having problems.

I have followed the maven install instructions and the axis build
instructions.

It would appear that when I run mvn install and maven attempts to
download various components it is having problems; ( The following is
just one set of problems relating to commons-httpclient, buit there are
more with the same pattern )

 

Downloading:
https://maven-repository.dev.java.net/nonav/repository//commons-httpclie
nt/poms/commons-httpclient-3.1.pom
 
371b downloaded
[WARNING] *** CHECKSUM FAILED - Checksum failed on download: local =
'402c45f736161f8d5a937f872c83fc014f6e5eae'; remote
= 'https://maven-repository.dev.java.net/nonav/repository//commons-httpclie
nt/poms/commons-httpclient-3.1.pom
 
371b downloaded
[WARNING] *** CHECKSUM FAILED - Checksum failed on download: local =
'402c45f736161f8d5a937f872c83fc014f6e5eae'; remote
= '

301 Moved Permanently

Moved Permanently
The document has moved http://download.java.net/maven/1/commons-httpclient/poms/commons-h
ttpclient-3.1.pom">here.http://download.java.net/maven/1/commons-httpclient/poms/commons-httpcl
ient-3.1.pom> >

Apache Server at maven-repository.dev.java.net Port
443


 

and ofcourse the accompanying zip is not valid < 1K.

 

 

 

 

 

 


--

This message is private and confidential. If you have received this
message in error, please notify postmas...@his.co.uk and remove it from
your system.

Please carry out your own virus check before opening attachments.

HISL Limited is a limited company registered in England and Wales.

Registered Number: 3202995. VAT number: 729-6256-05.

Registered Office: Chestnut Farm, Jill Lane, Sambourne, Redditch B96 6ES


--

 


-- 
Scanned by iCritical.

unsubscribe

[Steve Buster]

unsubscribe   
_
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt.com/GBL/go/177141665/direct/01/

unsubscribe

[David Gibbs]

From: Chinmoy Chakraborty [mailto:cch...@gmail.com]
Sent: 21 October 2009 12:09
To: axis-user@ws.apache.org
Subject: Re: Error page returned instead of Soap Exception when WS-Security 
Authentication fails in Rampart

I saw this error and I suppose this is fixed in 1.5..you can look at [1].

[1]. [ 
https://issues.apache.org/jira/browse/RAMPART-236?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=12739525#action_12739525
 ]

HTH,
Chinmoy



On Wed, Oct 21, 2009 at 12:17 PM, Ellecer Valencia 
mailto:elle...@gmail.com>> wrote:
Hi,

I'm trying to set up WS-Security (just username/password-clear-text)
and I'm trying to get the service to return a Soap Exception when the
user logs in with the wrong details. Should be easy, right? However, I
keep getting HTTP 500 error pages instead of Soap Exceptions, like
this one:

Apache Tomcat/6.0.18 - Error
report HTTP Status 500 - type Status
reportmessage description The
server encountered an internal error () that prevented it from
fulfilling this request.Apache Tomcat/6.0.18

Now I'm testing using axis 1.4.1, putting the exploded webapp in the
tomcat /webapps directory. When I started getting the error pages, I
thought removing the mappings for the HTTP 500 error in
/WEB-INF/web.xml would fix it, but it didn't. I've now removed
everything else in the Tomcat webapps directory, I've cleaned out the
Tomcat /work directory, I've even removed the /axis2-web directory in
the Axis webapp, just to eliminate the possiblity of any more JSPs -
*and the error pages still keep displaying*.

I came across a post from July that is having a problem similar to mine:

http://marc.info/?l=axis-user&m=124662013625695&w=2

However, I didn't come across any posts that resolved his problem.

The software I'm using is:

Axis 1.4.1
Rampart 1.4
Tomcat 6.0.18

Has anyone encountered this problem and what fixed it? I've tried
doing it using policy.xml and via "basic" rampart config, and am
getting similar results.

Actually, the curious thing is that when I get the error from a
service configured with "basic" rampart config, I get a stacktrace,
like this:

mApache Tomcat/6.0.18 - Error
report HTTP Status 500 - type Exception
reportmessage description The
server encountered an internal error () that prevented it from
fulfilling this request.exception
java.lang.NullPointerException
   
org.apache.rampart.RampartMessageData.(RampartMessageData.java:308)
   org.apache.rampart.MessageBuilder.build(MessageBuilder.java:61)
   org.apache.rampart.handler.RampartSender.invoke(RampartSender.java:64)
   org.apache.axis2.engine.Phase.invoke(Phase.java:317)
   org.apache.axis2.engine.AxisEngine.invoke(AxisEngine.java:264)
   org.apache.axis2.engine.AxisEngine.sendFault(AxisEngine.java:520)
   
org.apache.axis2.transport.http.AxisServlet.handleFault(AxisServlet.java:416)
   
org.apache.axis2.transport.http.AxisServlet.processAxisFault(AxisServlet.java:379)
   org.apache.axis2.transport.http.AxisServlet.doPost(AxisServlet.java:167)
   javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
   javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
note The full stack trace of the root cause is
available in the Apache Tomcat/6.0.18 logs.Apache Tomcat/6.0.18

-- and it says "Exception report" instead of "Status report" like in
the first one. I don't know if this indicates it's a different page
that is hardcoded inside of Axis (just guessing here)?

Thanks in advance for any ideas and help from all you wonderful
members of the mailing list.  =)


thanks,

Ellecer



The information contained in this email is strictly confidential and for the 
use of the addressee only, unless otherwise

Re: unsubscribe

[Andreas Veithen]

Please send a mail to axis-user-unsubscr...@ws.apache.org

2009/10/13 luca.tra...@tiscali.it :
>
>
>
> SCARICA TISCALI WIPHONE: parla e invia SMS gratis dal tuo 
> cellulare.http://wiphone.tiscali.it
>

unsubscribe

[luca.tra...@tiscali.it]

SCARICA TISCALI WIPHONE: parla e invia SMS gratis dal tuo 
cellulare.http://wiphone.tiscali.it

Re: unsubscribe

[Andreas Veithen]

Please send a mail to axis-user-unsubscr...@ws.apache.org

On Fri, Oct 9, 2009 at 06:10, Gudikoti, Rajesh
 wrote:
>
>
> Please help Logica to respect the environment by not printing this email /
> Pour contribuer comme Logica au respect de l'environnement, merci de ne pas
> imprimer ce mail / Bitte drucken Sie diese Nachricht nicht aus und helfen
> Sie so Logica dabei, die Umwelt zu schützen. / Por favor ajude a Logica a
> respeitar o ambiente não imprimindo este correio electrónico. This e-mail
> and any attachment is for authorised use by the intended recipient(s) only.
> It may contain proprietary material, confidential information and/or be
> subject to legal privilege. It should not be copied, disclosed to, retained
> or used by, any other party. If you are not an intended recipient then
> please promptly delete this e-mail and any attachment and all copies and
> inform the sender. Thank you.

unsubscribe

[Gudikoti, Rajesh]

 



Please help Logica to respect the environment by not printing this email  / 
Pour contribuer comme Logica au respect de l'environnement, merci de ne pas 
imprimer ce mail /  Bitte drucken Sie diese Nachricht nicht aus und helfen Sie 
so Logica dabei, die Umwelt zu schützen. /  Por favor ajude a Logica a 
respeitar o ambiente nao imprimindo este correio electronico.



This e-mail and any attachment is for authorised use by the intended 
recipient(s) only. It may contain proprietary material, confidential 
information and/or be subject to legal privilege. It should not be copied, 
disclosed to, retained or used by, any other party. If you are not an intended 
recipient then please promptly delete this e-mail and any attachment and all 
copies and inform the sender. Thank you.

unsubscribe

[Simon Côté]

unsubscribe 
  
_
Nous sommes vos photos. Partagez-nous dès maintenant avec Windows Live Photos.
http://go.microsoft.com/?linkid=9666051

unsubscribe

[David]

unsubscribe

Re: unsubscribe

[Andreas Veithen]

Please send a mail to axis-user-unsubscr...@ws.apache.org

On Mon, Sep 28, 2009 at 19:50, Sie, Yang  wrote:
> unsubscribe
>
>

unsubscribe

[Sie, Yang]

unsubscribe

Re: unsubscribe

[Andreas Veithen]

Please send a mail to axis-user-unsubscr...@ws.apache.org

On Mon, Sep 28, 2009 at 08:45, Chamara Silva  wrote:
>
>

unsubscribe

[Chamara Silva]

Re: unsubscribe

[Andreas Veithen]

You need to send a mail to axis-user-unsubscr...@ws.apache.org

On Thu, Sep 24, 2009 at 09:53, Pradeep Patel  wrote:
>
>
>
>

unsubscribe

[Pradeep Patel]

unsubscribe

[D.H.T.M.Gameren]

unsubscribe

==
The information transmitted via this e-mail is intended only for the person or
entity to which it is addressed and may contain confidential and/or privileged 
material.  Any review, retransmission, dissemination or other use of, or 
taking of any action in reliance upon this information by persons or entities 
other than the intended recipient is prohibited. If you received this in error, 
please contact the sender and delete the material from any computer.

unsubscribe

[Jeremy O'Donohue]

unsubscribe

[Steve Buster]

unsubscribe   
_
Hotmail® has ever-growing storage! Don’t worry about storage limits.
http://windowslive.com/Tutorial/Hotmail/Storage?ocid=TXT_TAGLM_WL_HM_Tutorial_Storage_062009

unsubscribe

[shantanu chawla]

unsubscribe
-- 
Graduate Student
Department of Computer Science,
San Diego State University

unsubscribe

[Grazi, Victor]

-Original Message-
From: karlovitz [mailto:steve.karlov...@synegen.com] 
Sent: Tuesday, September 22, 2009 2:19 PM
To: axis-user@ws.apache.org
Subject: Axis2 useOriginalwsdl not embedding imported schemas


For some reason when I set useOriginalwsdl = false and access the wsdl
via
services/MyService?wsdl it is returning the wsdl with the imports still
listed.  Does anyone know a way to utilize Axis to embed these xsd's.

Thanks

-- 
View this message in context:
http://www.nabble.com/Axis2-useOriginalwsdl-not-embedding-imported-schem
as-tp25530856p25530856.html
Sent from the Axis - User mailing list archive at Nabble.com.


=== 
 Please access the attached hyperlink for an important electronic 
communications disclaimer: 
 http://www.credit-suisse.com/legal/en/disclaimer_email_ib.html 
 
=== 
 

unsubscribe

[Harshad Chavan]

unsubscribe

[Jeremy O'Donohue]

unsubscribe

[Luc, Scott (ISD, IT)]

unsubscribe

This communication, including attachments, is for the exclusive use of 
addressee and may contain proprietary, confidential and/or privileged 
information.  If you are not the intended recipient, any use, copying, 
disclosure, dissemination or distribution is strictly prohibited.  If you are 
not the intended recipient, please notify the sender immediately by return 
e-mail, delete this communication and destroy all copies.

unsubscribe

[amardeep singh khera]

unsubscribe

[Jeremy O'Donohue]

unsubscribe

UNSUBSCRIBE

[vaman madhu raj]

 
svmadhu_...@yahoo.com


  

unsubscribe

[Dharmagadda, Avantika]

unsubscribe

[Andrea Rossi]

unsubscribe

[Fernando Cesar Silva]

unsubscribe

[Luc, Scott (ISD, IT)]

This communication, including attachments, is for the exclusive use of 
addressee and may contain proprietary, confidential and/or privileged 
information.  If you are not the intended recipient, any use, copying, 
disclosure, dissemination or distribution is strictly prohibited.  If you are 
not the intended recipient, please notify the sender immediately by return 
e-mail, delete this communication and destroy all copies.

unsubscribe

[Venkatesh Audinarayanan]

unsubscribe

[D.H.T.M.Gameren]

 

==
The information transmitted via this e-mail is intended only for the person or
entity to which it is addressed and may contain confidential and/or privileged 
material.  Any review, retransmission, dissemination or other use of, or 
taking of any action in reliance upon this information by persons or entities 
other than the intended recipient is prohibited. If you received this in error, 
please contact the sender and delete the material from any computer.

unsubscribe

[Fernando Cesar Silva]

unsubscribe

[Avinash laddha]

--- On Thu, 9/3/09, Sarathi Balasundaram  wrote:

> From: Sarathi Balasundaram 
> Subject: unsubscribe
> To: axis-user@ws.apache.org
> Date: Thursday, September 3, 2009, 3:40 PM
>  
> 

unsubscribe

[Clement]

_
Tchattez en direct en en vidéo avec vos amis !  
http://www.windowslive.fr/messenger/

unsubscribe

[Steve Buster]

_
Windows Live: Keep your friends up to date with what you do online.
http://windowslive.com/Campaign/SocialNetworking?ocid=PID23285::T:WLMTAGL:ON:WL:en-US:SI_SB_online:082009

Re: unsubscribe

[Larry Meadors]

axis-user-unsubscr...@ws.apache.org

On Thu, Sep 3, 2009 at 4:22 AM,  wrote:
>
>
> This e-mail and any files transmitted with it are for the sole use of the
> intended recipient(s) and may contain confidential and privileged
> information.
> If you are not the intended recipient, please contact the sender by reply
> e-mail and destroy all copies of the original message.
> Any unauthorized review, use, disclosure, dissemination, forwarding,
> printing or copying of this email or any action taken in reliance on this
> e-mail is strictly prohibited and may be unlawful.
>

unsubscribe

[Sasikumar.Natarajan]

 



This e-mail and any files transmitted with it are for the sole use of the 
intended recipient(s) and may contain confidential and privileged information.
If you are not the intended recipient, please contact the sender by reply 
e-mail and destroy all copies of the original message. 
Any unauthorized review, use, disclosure, dissemination, forwarding, printing 
or copying of this email or any action taken in reliance on this e-mail is 
strictly prohibited and may be unlawful.

unsubscribe

[Sarathi Balasundaram]

unsubscribe

[D.H.T.M.Gameren]

unsubscribe

==
The information transmitted via this e-mail is intended only for the person or
entity to which it is addressed and may contain confidential and/or privileged 
material.  Any review, retransmission, dissemination or other use of, or 
taking of any action in reliance upon this information by persons or entities 
other than the intended recipient is prohibited. If you received this in error, 
please contact the sender and delete the material from any computer.

unsubscribe

[trevor.baden]

unsubscribe

Re: unsubscribe

[Deepal jayasinghe]

Bhanu B wrote:
>
Please send an email to

axis-dev-unsubscr...@ws.apache.org
axis-user-unsubscr...@ws.apache.org

Thank,
Deepal

-- 
Thank you!


http://blogs.deepal.org
http://deepal.org

unsubscribe

[Bhanu B]

axis-user-unsubscribe

[Fernando Cesar Silva]

 

 

  Fernando Cesar da Silva | analista
programador | Tel: +55 19 3794 1608 R.1688

  Synchro Solução Fiscal – 17 anos | SPED | NFe
| CTe | MCe

 

Re: unsubscribe

[Larry Meadors]

axis-user-unsubscribe is your friend.

On Fri, Aug 28, 2009 at 9:59 AM, WILSON, JOHN D
[AG/1000] wrote:
> unsubscribe
>
>
>
> john d wilson
> Commercial Applications Developement
>
> Services Development Team
>
> Monsanto Company
> 800 N. Lindbergh Blvd. G3WM, Saint Louis, MO 63167
>
> w.314.694.4526
>
>
>
> This e-mail message may contain privileged and/or confidential information,
> and is intended to be received only by persons entitled to receive such
> information. If you have received this e-mail in error, please notify the
> sender immediately. Please delete it and all attachments from any servers,
> hard drives or any other media. Other use of this e-mail by you is strictly
> prohibited.
>
> All e-mails and attachments sent and received are subject to monitoring,
> reading and archival by Monsanto, including its subsidiaries. The recipient
> of this e-mail is solely responsible for checking for the presence of
> "Viruses" or other "Malware". Monsanto, along with its subsidiaries, accepts
> no liability for any damage caused by any such code transmitted by or
> accompanying this e-mail or any attachment.

unsubscribe

[Vinay Gaonkar]

unsubscribe

[WILSON, JOHN D [AG/1000]]

unsubscribe

 

john d wilson   
Commercial Applications Developement 

Services Development Team

Monsanto Company 
800 N. Lindbergh Blvd. G3WM, Saint Louis, MO 63167 

w.314.694.4526 

 


-
This e-mail message may contain privileged and/or confidential information, and 
is intended to be received only by persons entitled to receive such 
information. If you have received this e-mail in error, please notify the 
sender immediately. Please delete it and all attachments from any servers, hard 
drives or any other media. Other use of this e-mail by you is strictly 
prohibited.


All e-mails and attachments sent and received are subject to monitoring, 
reading and archival by Monsanto, including its subsidiaries. The recipient of 
this e-mail is solely responsible for checking for the presence of "Viruses" or 
other "Malware". Monsanto, along with its subsidiaries, accepts no liability 
for any damage caused by any such code transmitted by or accompanying this 
e-mail or any attachment.
-

Re: unsubscribe-axis-user

[Larry Meadors]

:-|

FYI: axis-user-unsubscr...@ws.apache.org works better.

On Thu, Aug 27, 2009 at 7:04 AM, MIKE WIESEMANN, BLOOMBERG/ 731
LEXIN wrote:
>
>

unsubscribe-axis-user

[MIKE WIESEMANN, BLOOMBERG/ 731 LEXIN]

unsubscribe-axis-user

[trevor.baden]

Re: unsubscribe-axis-user

[Larry Meadors]

You'll have better luck sending that to axis-user-unsubscr...@ws.apache.org

Larry


On Thu, Aug 27, 2009 at 6:43 AM, Kenneth W. Meehan wrote:
> unsubscribe-axis-user
>

unsubscribe-axis-user

[Kenneth W. Meehan]

unsubscribe-axis-user

Re: Unsubscribe

[Larry Meadors]

On Mon, Aug 10, 2009 at 7:26 AM, Urban, Patrick wrote:
> Ive been trying to unsubscribe from this list for years.

Please try again, and if you have issues, let us know - email me
directly if you want, I don't care. :)

That way we can let the apache infrastructure guys know and get it fixed.

Even better: If you have issues and an irc client, get on freenode and
talk to the people on #asfinfra - they are amazing at getting stuff
fixed up quickly.

For the AXIS team - we were having lots of "unsubscribe" emails on the
ibatis list, too - we added a footer to the message saying "To
unsubscribe, <>." and they all went away. Just a suggestion.
:-)

Larry

Re: Unsubscribe

[Andreas Veithen]

You need to send a mail to axis-user-unsubscr...@ws.apache.org and
follow the instructions.

On Mon, Aug 10, 2009 at 15:26, Urban, Patrick wrote:
>
> Ive been trying to unsubscribe from this list for years.
> Ive used the instructions, sent mails to the group etc. Something must be 
> bugged with it.
> Finally I gave up.
>
> Can someone possibly take a look at this and help us out thanks.
>
> -Original Message-
> From: Larry Meadors [mailto:larry.mead...@gmail.com]
> Sent: Monday, August 10, 2009 9:21 AM
> To: axis-user@ws.apache.org
> Subject: Re: Unsubscribe
>
> Really?
>
> This is the third unsubscribe email sent to the list today...maybe we could 
> add a footer to emails sent by the list that explained HOW to unsubscribe...
>
> Larry
>
> --
> This message and any attachments are intended only for the use of the 
> addressee and may contain information that is privileged and confidential. If 
> the reader of the message is not the intended recipient or an authorized 
> representative of the intended recipient, you are hereby notified that any 
> dissemination of this communication is strictly prohibited. If you have 
> received this communication in error, notify the sender immediately by return 
> email and delete the message and any attachments from your system.
>

RE: Unsubscribe

[Urban, Patrick]

 
Ive been trying to unsubscribe from this list for years.
Ive used the instructions, sent mails to the group etc. Something must be 
bugged with it.
Finally I gave up.

Can someone possibly take a look at this and help us out thanks.

-Original Message-
From: Larry Meadors [mailto:larry.mead...@gmail.com] 
Sent: Monday, August 10, 2009 9:21 AM
To: axis-user@ws.apache.org
Subject: Re: Unsubscribe

Really?

This is the third unsubscribe email sent to the list today...maybe we could add 
a footer to emails sent by the list that explained HOW to unsubscribe...

Larry

--
This message and any attachments are intended only for the use of the addressee 
and may contain information that is privileged and confidential. If the reader 
of the message is not the intended recipient or an authorized representative of 
the intended recipient, you are hereby notified that any dissemination of this 
communication is strictly prohibited. If you have received this communication 
in error, notify the sender immediately by return email and delete the message 
and any attachments from your system.

Re: Unsubscribe

[Larry Meadors]

Really?

This is the third unsubscribe email sent to the list today...maybe we
could add a footer to emails sent by the list that explained HOW to
unsubscribe...

Larry

Unsubscribe

[Edgardo Ibañez O.]

Unsubscribe

[Suman Adak]

=-=-=
Notice: The information contained in this e-mail
message and/or attachments to it may contain 
confidential or privileged information. If you are 
not the intended recipient, any dissemination, use, 
review, distribution, printing or copying of the 
information contained in this e-mail message 
and/or attachments to it are strictly prohibited. If 
you have received this communication in error, 
please notify us by reply e-mail or telephone and 
immediately and permanently delete the message 
and any attachments. Thank you

Unsubscribe

[Chen, Jennifer]

Unsubscribe

[Janardhan Rao (janrao)]

unsubscribe

[Thompson, Edward]

Re: unsubscribe

[Andreas Veithen]

To unsubscribe, you need to send a mail to axis-user-unsubscr...@ws.apache.org.

Andreas

On Tue, Jul 14, 2009 at 07:26, Agila
Govindaraju wrote:
>
>

unsubscribe

[Agila Govindaraju]

I can't unsubscribe

[Cesar de Almeida Correia]

Hello all,

I am trying do unsubscribe in this list but the reply email is always
rejected. This is the email error message:

   
 Your   Re: confirm unsubscribe from axis-user@ws.apache.org   
 message:  
   
 was notaxis-user-uc.1245847216.hdfbhcdnllbobndcmdic-cesarac=lcc.ufmg.
 delivered  b...@ws.apache.org   
 to:   
   
   
 because:   Error transferring to mx1.eu.APACHE.ORG; SMTP Protocol 
Returned a Permanent Error 552 spam score (6.0) exceeded   
threshold  
   







Does someone can help me?

Thanks in advance

Cesar.

unsubscribe

[Ramesh Vishwanatham]

DTCC DISCLAIMER: This email and any files transmitted with it are
confidential and intended solely for the use of the individual or
entity to whom they are addressed. If you have received this email
in error, please notify us immediately and delete the email and any
attachments from your system. The recipient should check this email
and any attachments for the presence of viruses.  The company
accepts no liability for any damage caused by any virus transmitted
by this email.

Re: Unsubscribe

[Andreas Veithen]

To unsubscribe, you need to send a mail to
axis-user-unsubscr...@ws.apache.org, not to the mailing list itself.

On Tue, Apr 14, 2009 at 11:49, Arijith Roy  wrote:
> Unsubscribe
>
>

Unsubscribe

[Arijith Roy]

Unsubscribe



  

Unsubscribe

[Takashi Saruhashi]

Unsubscribe

UNSUBSCRIBE

[Arijith Roy]

unsubscribe

[Manoj KG]

unsubscribe

[Simon Oldham]

unsubscribe

[Suman Adak]

=-=-=
Notice: The information contained in this e-mail
message and/or attachments to it may contain 
confidential or privileged information. If you are 
not the intended recipient, any dissemination, use, 
review, distribution, printing or copying of the 
information contained in this e-mail message 
and/or attachments to it are strictly prohibited. If 
you have received this communication in error, 
please notify us by reply e-mail or telephone and 
immediately and permanently delete the message 
and any attachments. Thank you

unsubscribe

[John . McCosker]

unsubscribe

[Zhu Zhong]

  ___ 
  好玩贺卡等你发，邮箱贺卡全新上线！ 
http://card.mail.cn.yahoo.com/

Re: unsubscribe

[m4rkuz]

Sorry, my wrong, I was trying to unsubscribe from another list, and got
mixed up..




Marcus V. Sánchez D.
__
Enterprise Developer.
Sun Certified Java Programmer (SCJP)


On Wed, Feb 4, 2009 at 2:59 PM, Andreas Veithen
wrote:

> Christopher,
>
> If you want to unsubscribe, you need to send a mail to
> axis-user-unsubscr...@ws.apache.org.
>
> Andreas
>
> On Wed, Feb 4, 2009 at 20:56, Meeusen, Christopher W.
>  wrote:
> > unsubscribe
> > 
> > From: axis-user-return-77544-meeusen.christopher=mayo@ws.apache.org
> > [mailto:axis-user-return-77544-Meeusen.Christopher=mayo.edu@
> ws.apache.org]
> > On Behalf Of Nandana Mihindukulasooriya
> > Sent: Wednesday, February 04, 2009 12:30 PM
> > To: axis-user@ws.apache.org
> > Subject: Re: Problem building proper Policy file ...
> >
> > Hi Marcus,
> >  try changing
> >
> >  > sp:IncludeToken="
> http://schemas.xmlsoap.org/ws/2005/07/securitypolicy/IncludeToken/Never";>
> >
> > to
> >
> >  > sp:IncludeToken="
> http://schemas.xmlsoap.org/ws/2005/07/securitypolicy/IncludeToken/AlwaysToRecipient
> ">
> >
> > in the  assertion.
> >
> > thanks,
> > nandana
> >
> > On Wed, Feb 4, 2009 at 11:26 PM, m4rkuz  wrote:
> >>
> >> HI Nandana,
> >>
> >> Attached to this message is the soap message generated by rampart(the
> one
> >> that fails), is quite different and the first big difference I see is
> that
> >> oracle made soap has two (2) BinarySecurityToken and the rampart made
> just
> >> have one.
> >>
> >> the error I get in the client side wrap around the soap response message
> >> is:
> >>
> >> InvalidSecurity FAULT MESSAGE: An invalid token was provided
> >>
> >>
> >>
> >> Any Ideas?
> >>
> >> I would ask for the Oracle Log, to post it.
> >>
> >>
> >> Marcus V. Sánchez D.
> >> __
> >> Enterprise Developer.
> >> Sun Certified Java Programmer (SCJP)
> >>
> >>
> >> On Wed, Feb 4, 2009 at 12:21 PM, Nandana Mihindukulasooriya
> >>  wrote:
> >>>
> >>> Hi Marcus,
> >>>From the first look, it seems the policy you have matches the
> >>> success SOAP message. Do you get an error from the OWM side when you
> use
> >>> this policy at the client ? If so what is the error message ? The
> returning
> >>> message may not say what the error is, but if you have access to the
> OWM
> >>> logs, you will be able to find out what the error is. And can you
> attach the
> >>> message generated with this policy in Axis2/Rampart client so we can
> compare
> >>> it.
> >>>
> >>> thanks,
> >>> nandana
> >>>
> >>> On Wed, Feb 4, 2009 at 10:37 PM, m4rkuz  wrote:
> >>>>
> >>>> Hi Eeveryone,
> >>>>
> >>>> I've trying for a while now to make a proper client for a web service
> >>>> made in oracle (OWM ) with Axis2 and Rampart, I had been able to
> overcome
> >>>> some issues about x509v3 and the hole signing process but now in the
> last
> >>>> part the Encription I just don't know how to declare it properly for
> the
> >>>> client to sussesfuly call the WS.
> >>>>
> >>>> I had an example of a suscessfull soap message (oracle client
> generated)
> >>>> and a copy of my policy for someone to take a quick look and help me
> out.
> >>>>
> >>>>
> >>>> The files are attached.
> >>>>
> >>>> that same policy file and without the encription configuration works
> >>>> fine if the WS require only signing, so is not totally wrong.
> >>>>
> >>>>
> >>>>
> >>>> If someone had an idea how to mimic that message from axis2, would
> help
> >>>> me a lot,
> >>>>
> >>>>
> >>>> Marcus V. Sánchez D.
> >>>> __
> >>>> Enterprise Developer.
> >>>> Sun Certified Java Programmer (SCJP)
> >>>
> >>>
> >>>
> >>> --
> >>> Nandana Mihindukulasooriya
> >>> WSO2 inc.
> >>>
> >>> http://nandana83.blogspot.com/
> >>> http://www.wso2.org
> >>
> >
> >
> >
> > --
> > Nandana Mihindukulasooriya
> > WSO2 inc.
> >
> > http://nandana83.blogspot.com/
> > http://www.wso2.org
> >
>

Re: unsubscribe

[Andreas Veithen]

Christopher,

If you want to unsubscribe, you need to send a mail to
axis-user-unsubscr...@ws.apache.org.

Andreas

On Wed, Feb 4, 2009 at 20:56, Meeusen, Christopher W.
 wrote:
> unsubscribe
> 
> From: axis-user-return-77544-meeusen.christopher=mayo@ws.apache.org
> [mailto:axis-user-return-77544-meeusen.christopher=mayo@ws.apache.org]
> On Behalf Of Nandana Mihindukulasooriya
> Sent: Wednesday, February 04, 2009 12:30 PM
> To: axis-user@ws.apache.org
> Subject: Re: Problem building proper Policy file ...
>
> Hi Marcus,
>  try changing
>
>  sp:IncludeToken="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy/IncludeToken/Never";>
>
> to
>
>  sp:IncludeToken="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy/IncludeToken/AlwaysToRecipient";>
>
> in the  assertion.
>
> thanks,
> nandana
>
> On Wed, Feb 4, 2009 at 11:26 PM, m4rkuz  wrote:
>>
>> HI Nandana,
>>
>> Attached to this message is the soap message generated by rampart(the one
>> that fails), is quite different and the first big difference I see is that
>> oracle made soap has two (2) BinarySecurityToken and the rampart made just
>> have one.
>>
>> the error I get in the client side wrap around the soap response message
>> is:
>>
>> InvalidSecurity FAULT MESSAGE: An invalid token was provided
>>
>>
>>
>> Any Ideas?
>>
>> I would ask for the Oracle Log, to post it.
>>
>>
>> Marcus V. Sánchez D.
>> __
>> Enterprise Developer.
>> Sun Certified Java Programmer (SCJP)
>>
>>
>> On Wed, Feb 4, 2009 at 12:21 PM, Nandana Mihindukulasooriya
>>  wrote:
>>>
>>> Hi Marcus,
>>>From the first look, it seems the policy you have matches the
>>> success SOAP message. Do you get an error from the OWM side when you use
>>> this policy at the client ? If so what is the error message ? The returning
>>> message may not say what the error is, but if you have access to the OWM
>>> logs, you will be able to find out what the error is. And can you attach the
>>> message generated with this policy in Axis2/Rampart client so we can compare
>>> it.
>>>
>>> thanks,
>>> nandana
>>>
>>> On Wed, Feb 4, 2009 at 10:37 PM, m4rkuz  wrote:
>>>>
>>>> Hi Eeveryone,
>>>>
>>>> I've trying for a while now to make a proper client for a web service
>>>> made in oracle (OWM ) with Axis2 and Rampart, I had been able to overcome
>>>> some issues about x509v3 and the hole signing process but now in the last
>>>> part the Encription I just don't know how to declare it properly for the
>>>> client to sussesfuly call the WS.
>>>>
>>>> I had an example of a suscessfull soap message (oracle client generated)
>>>> and a copy of my policy for someone to take a quick look and help me out.
>>>>
>>>>
>>>> The files are attached.
>>>>
>>>> that same policy file and without the encription configuration works
>>>> fine if the WS require only signing, so is not totally wrong.
>>>>
>>>>
>>>>
>>>> If someone had an idea how to mimic that message from axis2, would help
>>>> me a lot,
>>>>
>>>>
>>>> Marcus V. Sánchez D.
>>>> __
>>>> Enterprise Developer.
>>>> Sun Certified Java Programmer (SCJP)
>>>
>>>
>>>
>>> --
>>> Nandana Mihindukulasooriya
>>> WSO2 inc.
>>>
>>> http://nandana83.blogspot.com/
>>> http://www.wso2.org
>>
>
>
>
> --
> Nandana Mihindukulasooriya
> WSO2 inc.
>
> http://nandana83.blogspot.com/
> http://www.wso2.org
>

unsubscribe

[Meeusen, Christopher W.]

unsubscribe



From: axis-user-return-77544-meeusen.christopher=mayo@ws.apache.org 
[mailto:axis-user-return-77544-meeusen.christopher=mayo@ws.apache.org] On 
Behalf Of Nandana Mihindukulasooriya
Sent: Wednesday, February 04, 2009 12:30 PM
To: axis-user@ws.apache.org
Subject: Re: Problem building proper Policy file ...


Hi Marcus, 
 try changing 

http://schemas.xmlsoap.org/ws/2005/07/securitypolicy/IncludeToken/Never";>

to 

http://schemas.xmlsoap.org/ws/2005/07/securitypolicy/IncludeToken/AlwaysToRecipient";>

in the  assertion. 

thanks,
nandana


On Wed, Feb 4, 2009 at 11:26 PM, m4rkuz  wrote:


HI Nandana,

Attached to this message is the soap message generated by rampart(the 
one that fails), is quite different and the first big difference I see is that 
oracle made soap has two (2) BinarySecurityToken and the rampart made just have 
one.

the error I get in the client side wrap around the soap response 
message is:

InvalidSecurity FAULT MESSAGE: An invalid token was provided



Any Ideas? 

I would ask for the Oracle Log, to post it. 



Marcus V. Sánchez D.
__
Enterprise Developer.
Sun Certified Java Programmer (SCJP)



On Wed, Feb 4, 2009 at 12:21 PM, Nandana Mihindukulasooriya 
 wrote:


Hi Marcus,
   From the first look, it seems the policy you have 
matches the success SOAP message. Do you get an error from the OWM side when 
you use this policy at the client ? If so what is the error message ? The 
returning message may not say what the error is, but if you have access to the 
OWM logs, you will be able to find out what the error is. And can you attach 
the message generated with this policy in Axis2/Rampart client so we can 
compare it. 

thanks,
nandana 


On Wed, Feb 4, 2009 at 10:37 PM, m4rkuz  
wrote:


Hi Eeveryone,

I've trying for a while now to make a proper client for 
a web service made in oracle (OWM ) with Axis2 and Rampart, I had been able to 
overcome some issues about x509v3 and the hole signing process but now in the 
last part the Encription I just don't know how to declare it properly for the 
client to sussesfuly call the WS.

I had an example of a suscessfull soap message (oracle 
client generated) and a copy of my policy for someone to take a quick look and 
help me out.


The files are attached.

that same policy file and without the encription 
configuration works fine if the WS require only signing, so is not totally 
wrong.



If someone had an idea how to mimic that message from 
axis2, would help me a lot,


Marcus V. Sánchez D.
__
Enterprise Developer.
Sun Certified Java Programmer (SCJP)





-- 
Nandana Mihindukulasooriya  
WSO2 inc.

http://nandana83.blogspot.com/
http://www.wso2.org






-- 
Nandana Mihindukulasooriya  
WSO2 inc.

http://nandana83.blogspot.com/
http://www.wso2.org

Re: unsubscribe

[Demetris G]

Oops - sorry - testing something.

unsubscribe

[Demetris G]

unsubscribe

Re: Unsubscribe

[Andreas Veithen]

You need to send a mail to axis-user-unsubscr...@ws.apache.org.

On Sun, Jan 4, 2009 at 05:33, Harikrishna Imadabattina
 wrote:
> HI I want to unsubscribe from this group. Please let me know the way
>
>
>
> Thanks
>
> Harikrishna
>
>
>
> 
>
> From: Amila Suriarachchi [mailto:amilasuriarach...@gmail.com]
> Sent: Sunday, January 04, 2009 7:56 AM
> To: axis-user@ws.apache.org
> Subject: Re: SERVICE_ONJECT_SUPPLIER not specified
>
>
>
> have a look at here[1]. you need to specify a object supplier at the
> services.xml
>
> thanks,
> Amila.
>
>
> [1] http://ws.apache.org/axis2/1_4_1/spring.html
>
> On Sat, Jan 3, 2009 at 2:11 AM, robert lazarski 
> wrote:
>
> On Fri, Jan 2, 2009 at 5:26 PM, rabelenda  wrote:
>>>> [CODE]org.apache.axis2.AxisFault: The SERVICE_OBJECT_SUPPLIER parameter
>>>> is
>>>> not specified.
>>>
>>> You most likely have a bean name / service class mismatch. I'd look
>>> for typos. Here's the problem code from
>>>
>>> modules/kernel/src/org/apache/axis2/receivers/AbstractMessageReceiver.java
>>
>
>> I have search for any mistake and I didn't find anything. I tested
>> chenging
>> the SpringBeanName parameter in the services.xml file to an invalid one
>> and
>> the application gives me the same error. But if a put it in the correct
>> way,
>> it still gives me the error. I think that the problem isn't a mapping
>> between bean and service because if a put an invalid class name on the
>> bean
>> the server (tomcat) gives me an error when deploying saying that the class
>> doesn't exists. I don't kow if is this what you were thinking that could
>> be
>> wrong, thanks for the fast reply :-).
>>
>
> Perhaps its actually not finding the ServiceObjectSupplier . Make sure
> the name is correct there. Put axis2 / spring in debug and make sure
> that spring is loading correctly. You'll see warnings in the logs if
> axis2 can't find a bean name, ie, spring isn't getting loaded, before
> the exception.
>
> HTH,
> Robert
>
>
> --
> Amila Suriarachchi
> WSO2 Inc.
> blog: http://amilachinthaka.blogspot.com/

Unsubscribe

[Harikrishna Imadabattina]

HI I want to unsubscribe from this group. Please let me know the way

 

Thanks

Harikrishna

 

  _  

From: Amila Suriarachchi [mailto:amilasuriarach...@gmail.com] 
Sent: Sunday, January 04, 2009 7:56 AM
To: axis-user@ws.apache.org
Subject: Re: SERVICE_ONJECT_SUPPLIER not specified

 

have a look at here[1]. you need to specify a object supplier at the
services.xml

thanks,
Amila.


[1] http://ws.apache.org/axis2/1_4_1/spring.html

On Sat, Jan 3, 2009 at 2:11 AM, robert lazarski 
wrote:

On Fri, Jan 2, 2009 at 5:26 PM, rabelenda  wrote:
>>> [CODE]org.apache.axis2.AxisFault: The SERVICE_OBJECT_SUPPLIER parameter
>>> is
>>> not specified.
>>
>> You most likely have a bean name / service class mismatch. I'd look
>> for typos. Here's the problem code from
>>
modules/kernel/src/org/apache/axis2/receivers/AbstractMessageReceiver.java
>

> I have search for any mistake and I didn't find anything. I tested
chenging
> the SpringBeanName parameter in the services.xml file to an invalid one
and
> the application gives me the same error. But if a put it in the correct
way,
> it still gives me the error. I think that the problem isn't a mapping
> between bean and service because if a put an invalid class name on the
bean
> the server (tomcat) gives me an error when deploying saying that the class
> doesn't exists. I don't kow if is this what you were thinking that could
be
> wrong, thanks for the fast reply :-).
>

Perhaps its actually not finding the ServiceObjectSupplier . Make sure
the name is correct there. Put axis2 / spring in debug and make sure
that spring is loading correctly. You'll see warnings in the logs if
axis2 can't find a bean name, ie, spring isn't getting loaded, before
the exception.

HTH,
Robert




-- 
Amila Suriarachchi
WSO2 Inc.
blog: http://amilachinthaka.blogspot.com/