Re: [BackupPC-users] Premature end of script headers: index.cgi
When I do that I get the html page. You're right: so thats not the problem either.. Any other ideas? Sean On 07/09/2007, Les Mikesell <[EMAIL PROTECTED]> wrote: > > Sean Boran wrote: > > > And the backuppc user doesn't like the first perl lines: > > su backuppc /opt/backuppc/cgi-bin/index.cgi > > /opt/backuppc/cgi-bin/index.cgi: line 48: use: command not found > > /opt/backuppc/cgi-bin/index.cgi: line 49: no: command not found > > These are shell errors, not perl errors. Try su'ing to backuppc first, > then running /opt/backuppc/cgi-bin/index.cgi with perl. > > -- >Les Mikesell > [EMAIL PROTECTED] > > - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/___ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/backuppc-users http://backuppc.sourceforge.net/
Re: [BackupPC-users] Got fatal error during xfer (fileListReceive failed)
Is rsync installed on the second Ubuntu laptop? Are there any differences in the file /etc/ssh/sshd_config on the two laptops? -Rob Robert Saunders wrote: > I have successfully set up backuppc on a Ubuntu 7.04 box, and equally > successfully set up one Ubuntu 7.04 laptop as a client, using rsync. I > generated ssh keys on both the client (laptop) and host (backuppc), > exchanged public keys and appended to the authorized_keys2 and > known_hosts files. This first laptop backs up fine. > > I then tried to set up a second Ubuntu 7.04 laptop. I copied over the > host (backuppc)'s public key file (the same one generated above), and > appended it to the second client laptop's authorized_keys2 file. > > When logged in as backuppc on the host (backuppc) PC, executing > ssh -l root 192.168.0.9 whoami > gives the output > root > without being prompted for root's password. So at this point all looks > OK. When I try to initiate a backup, it fails, with the following error > message (I included -v to get errors listed): > > > Running: /usr/bin/ssh -q -v -l root robert-laptop /usr/bin/rsync > --server --sender --numeric-ids --perms --owner --group -D --links > --times --block-size=2048 --recursive -D --ignore-times . /home/ > Xfer PIDs are now 5370 > Got remote protocol 1852141647 > Fatal error (bad version): OpenSSH_4.3p2 Debian-8ubuntu1, OpenSSL 0.9.8c 05 > Sep 2006 > > Read EOF: > Tried again: got 0 bytes > fileListReceive() failed > Done: 0 files, 0 bytes > Got fatal error during xfer (fileListReceive failed) > Backup aborted (fileListReceive failed) > > I realise I'm probably a bit inexperienced with ssh - I googled and searched > this mailing list, > but found nothing that has sorted this issue out. I'd be very grateful for > any advice to sort this out. > > Robert > > - > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ > ___ > BackupPC-users mailing list > BackupPC-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/backuppc-users > http://backuppc.sourceforge.net/ > - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/backuppc-users http://backuppc.sourceforge.net/
Re: [BackupPC-users] restore hangs with permission denied - rsyncd on windows
Craig Barratt wrote: > Rob writes: > > >> BackupPC saved my butt today. I accidentally deleted about 10 GB of >> data from a network drive, and restored it in about 10 minutes. >> However, the restore process has hung and BackupPC says "backup in >> progress". >> >> I'm using rsyncd on Windows. I performed a direct restore. The last >> line of the rsyncd.log file shows "rsync: rename >> "path/to/file/.Thumbs.db.qfnb1B" -> "path/to/file/Thumbs.db": permission >> denied (13) >> >> Anything that I don't have permission to restore, I probably didn't have >> permission to delete in the first place. I suspect all the deleted >> files have been restored, but I'd like to convince BackupPC to continue >> through the rest of the restoration just in case. How can I do that? >> And how can I overcome the "permission denied" error in the future? >> > > Sorry about the delay in replying. I'm not sure what caused the > error. It's clouded by the fact that cygwin is trying to map the > windows attributes to their linux equivalents, and then back the > other way on restore. > > Does the RestoreLOG file show any errors? > > Craig > Craig, I got this one worked out already. It was a windows permissions problem. For the record, here is what I got in the restore log, although the log wasn't produced until after the restore had timed out 1223 minutes after starting it--not particularly helpful when I was trying to figure out why the restore was taking so long! Remote[1]: rsync: rename "c/WINDOWS/system32/D:/company/Chris Lapp/SolidWorks/PROJECTS-and-PARTS/WATERS/189M2-S1316/.Thumbs.db.qfnb1B" (in company) -> "Chris Lapp/SolidWorks/PROJECTS-and-PARTS/WATERS/189M2-S1316/Thumbs.db": Permission denied (13) exiting after signal ALRM restore failed: aborted by signal=ALRM -Rob - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/backuppc-users http://backuppc.sourceforge.net/
[BackupPC-users] yum package for latest release?
The yum pkg for BackupPC on the Fedora Extras is back level (2.1.2-7) with AFAICS no web UI? Is there a plan to pkg 3.x? If so, when? L.W.(Les) Dunaway 770-490-7546 Some men see things as they are and ask why. Others dream things that never were and ask why not. George Bernard Shaw - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/backuppc-users http://backuppc.sourceforge.net/
Re: [BackupPC-users] BackupPC-users Digest, Vol 17, Issue 12
I'm at work, so can't check on the rsync installation on the second laptop. I am pretty certain it is installed, but will check this evening. I can confirm that the /etc/ssh/sshd_config file is identical on both laptops, as I checked this last night while googling for a solution to this problem. Robert > Message: 7 > Date: Mon, 10 Sep 2007 07:27:41 -0400 > From: Rob Owens <[EMAIL PROTECTED]> > Subject: Re: [BackupPC-users] Got fatal error during xfer > (fileListReceive failed) > Cc: backuppc-users@lists.sourceforge.net > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset=ISO-8859-1 > > Is rsync installed on the second Ubuntu laptop? > > Are there any differences in the file /etc/ssh/sshd_config on the two > laptops? > > -Rob > > Robert Saunders wrote: > > I have successfully set up backuppc on a Ubuntu 7.04 box, and equally > > successfully set up one Ubuntu 7.04 laptop as a client, using rsync. I > > generated ssh keys on both the client (laptop) and host (backuppc), > > exchanged public keys and appended to the authorized_keys2 and > > known_hosts files. This first laptop backs up fine. > > > > I then tried to set up a second Ubuntu 7.04 laptop. I copied over the > > host (backuppc)'s public key file (the same one generated above), and > > appended it to the second client laptop's authorized_keys2 file. > > > > When logged in as backuppc on the host (backuppc) PC, executing > > ssh -l root 192.168.0.9 whoami > > gives the output > > root > > without being prompted for root's password. So at this point all looks > > OK. When I try to initiate a backup, it fails, with the following error > > message (I included -v to get errors listed): > > > > > > Running: /usr/bin/ssh -q -v -l root robert-laptop /usr/bin/rsync > > --server --sender --numeric-ids --perms --owner --group -D --links > > --times --block-size=2048 --recursive -D --ignore-times . /home/ > > Xfer PIDs are now 5370 > > Got remote protocol 1852141647 > > Fatal error (bad version): OpenSSH_4.3p2 Debian-8ubuntu1, OpenSSL 0.9.8c 05 > > Sep 2006 > > > > Read EOF: > > Tried again: got 0 bytes > > fileListReceive() failed > > Done: 0 files, 0 bytes > > Got fatal error during xfer (fileListReceive failed) > > Backup aborted (fileListReceive failed) > > > > I realise I'm probably a bit inexperienced with ssh - I googled and > > searched this mailing list, > > but found nothing that has sorted this issue out. I'd be very grateful for > > any advice to sort this out. > > > > Robert - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/backuppc-users http://backuppc.sourceforge.net/
Re: [BackupPC-users] Got fatal error during xfer (fileListReceive failed)
Robert writes: > OK. When I try to initiate a backup, it fails, with the following error > message (I included -v to get errors listed): > > Running: /usr/bin/ssh -q -v -l root robert-laptop /usr/bin/rsync > --server --sender --numeric-ids --perms --owner --group -D --links > --times --block-size=2048 --recursive -D --ignore-times . /home/ > Xfer PIDs are now 5370 > Got remote protocol 1852141647 > Fatal error (bad version): OpenSSH_4.3p2 Debian-8ubuntu1, OpenSSL 0.9.8c 05 > Sep 2006 The -v option to ssh is causing this error, since it causes ssh to emit this text: OpenSSH_4.3p2 Debian-8ubuntu1, OpenSSL 0.9.8c 05 Sep 2006 What happens without the -v? Craig - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/backuppc-users http://backuppc.sourceforge.net/
Re: [BackupPC-users] Problem with failed backups
Marty writes: > With one host I intermittently get the following error message with two > different servers running different versions of backuppc: > > Tar exited with error 256 () status > > Judging from the Xferlog contents, the failure seems to occur only after the > last files are transmitted successfully. I have seen rare intermittent > failures > before, but lately they seem to be more frequent, with one failing several > consecutive attempts. The client host has recently increased its size by > several gigabytes. The servers are Debian Sarge systems and the client is > running Debian Etch. There is plenty of spare disk space on the servers. > Thanks > in advance for any ideas or suggestions. Please look this up on the mail list. This was fixed in 3.0.0: * Fixes to lib/BackupPC/Xfer/Tar.pm for tar 1.16: allow 1 (ie: 256) as a successful exit status and match "Total bytes read" message for restores. First reported by Torsten Sadowski and debugged by Ralf Gross and Holger Parplies. Craig - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/backuppc-users http://backuppc.sourceforge.net/
[BackupPC-users] files already in pool are downloaded
I have been trying to get a good backup with backuppc (2.1.1) but it has been taking days. I ran a dump on the command line so I could see what is going on and I see the files that are in the pool are being downloaded. For example: pool 700 511/1008039 home/daler/My Documents/DRAWINGS/Lakeport/Pics/C_03.tif This is a large file and at 750kb/s takes a while. Is this expected? I thought if they are in the pool they do not need to be downloaded. Thanks in advance, David Koski [EMAIL PROTECTED] - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/backuppc-users http://backuppc.sourceforge.net/
[BackupPC-users] 3.1.0beta0
Just a note: I've installed the 3.1.0beta0 build on my system, everything seems to be backing up fine, I am able to traverse the tree, but the summary page is incorrect: _General Server Information_ * The servers PID is 32354, on host epibackup.com, version 3.1.0beta0, started at 9/6 09:31. * This status was generated at 9/9 10:20. * The configuration was last loaded at 9/6 09:31. * PCs will be next queued at 9/9 11:00. * Other info: o 0 pending backup requests from last scheduled wakeup, o 0 pending user backup requests, o 0 pending command requests, o Pool is 0.00GB comprising 0 files and 1 directories (as of 9/9 01:00), o Pool hashing gives 0 repeated files with longest chain 0, o Nightly cleanup removed 0 files of size 0.00GB (around 9/9 01:00), o Pool file system was recently at 86% (9/9 10:15), today's max is 86% (9/9 01:00) and yesterday's max was 86%. _The host summary shows_ * This status was generated at 9/9 10:22. * Pool file system was recently at 86% (9/9 10:15), today's max is 86% (9/9 01:00) and yesterday's max was 86%. Hosts with good Backups There are 150 hosts that have been backed up, for a total of: * 288 full backups of total size 1092.10GB (prior to pooling and compression), * 1633 incr backups of total size 1476.37GB (prior to pooling and compression). Doug -- Ben Franklin quote: "Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety." - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/backuppc-users http://backuppc.sourceforge.net/
Re: [BackupPC-users] files already in pool are downloaded
My understanding is that with tar and smb, all files are downloaded (and then discarded if they're already in the pool). Rsync is smart enough, though, not to download files already in the pool. -Rob David Koski wrote: > I have been trying to get a good backup with backuppc (2.1.1) but it has been > taking days. I ran a dump on the command line so I could see what is going > on and I see the files that are in the pool are being downloaded. For > example: > > pool 700 511/1008039 home/daler/My > Documents/DRAWINGS/Lakeport/Pics/C_03.tif > > This is a large file and at 750kb/s takes a while. Is this expected? I > thought if > they are in the pool they do not need to be downloaded. > > Thanks in advance, > David Koski > [EMAIL PROTECTED] > > - > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ > ___ > BackupPC-users mailing list > BackupPC-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/backuppc-users > http://backuppc.sourceforge.net/ > - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/backuppc-users http://backuppc.sourceforge.net/
Re: [BackupPC-users] Got fatal error during xfer (fileListReceive failed)
On Mon, 2007-09-10 at 06:37 -0700, Craig Barratt wrote: > Robert writes: > > > OK. When I try to initiate a backup, it fails, with the following error > > message (I included -v to get errors listed): > > > > Running: /usr/bin/ssh -q -v -l root robert-laptop /usr/bin/rsync > > --server --sender --numeric-ids --perms --owner --group -D --links > > --times --block-size=2048 --recursive -D --ignore-times . /home/ > > Xfer PIDs are now 5370 > > Got remote protocol 1852141647 > > Fatal error (bad version): OpenSSH_4.3p2 Debian-8ubuntu1, OpenSSL 0.9.8c 05 > > Sep 2006 > > The -v option to ssh is causing this error, since it causes ssh to > emit this text: > > OpenSSH_4.3p2 Debian-8ubuntu1, OpenSSL 0.9.8c 05 Sep 2006 > > What happens without the -v? > > Craig I removed the -v option from config.pl, restarted backuppc, this is the log: Running: /usr/bin/ssh -q -l root robert-laptop /usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --times --block-size=2048 --recursive -D --ignore-times . /home/ Xfer PIDs are now 5985 Got remote protocol 1651076184 Fatal error (bad version): Xlib: connection to ":0.0" refused by server Xlib: Read EOF: Tried again: got 0 bytes fileListReceive() failed Done: 0 files, 0 bytes Got fatal error during xfer (fileListReceive failed) Backup aborted (fileListReceive failed) Robert - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/backuppc-users http://backuppc.sourceforge.net/
[BackupPC-users] using backuppc to backupc another backuppc server
I have backuppc running on my LAN, and I want to send the backups over a T1 line to a remote server. I have about 30Gig of data on my backuppc partition. I tried using an archive host and it's to slow to stream all that data. So I installed backuppc on the remote server and setup rsync between the two servers. The backups should "flow" in ca "cascade effect" to the remote server now. What do more experienced users think of this setup? - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/backuppc-users http://backuppc.sourceforge.net/
Re: [BackupPC-users] yum package for latest release?
On 9/10/07, Les Dunaway <[EMAIL PROTECTED]> wrote: > The yum pkg for BackupPC on the Fedora Extras is back level (2.1.2-7) > with AFAICS no web UI? > > Is there a plan to pkg 3.x? If so, when? You should probably open a bug in RedHat's bugzilla to get an answer to this, it's very likely that Craig does not maintain the Fedora BackupPC RPMs there. In fact, searching for backuppc reveals this bug: https://bugzilla.redhat.com/show_bug.cgi?id=232738 Which shows that the current maintainer is looking for a co-maintainer to help with updates and the like, meaning that backuppc is more or less unmaintained in Fedora right now. -Dave - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/backuppc-users http://backuppc.sourceforge.net/
Re: [BackupPC-users] using backuppc to backupc another backuppc server
I looked into doing this but: Nightly we're getting about 50-60 gigs of changed files (Oh, how I hate PST files!!). Figure a T1 will do 160kb/sec. 9 mb a minute. 13.8 gb a day. Oops! [EMAIL PROTECTED] wrote: > I have backuppc running on my LAN, and I want to send the backups over a > T1 line to a remote server. I have about 30Gig of data on my backuppc > partition. I tried using an archive host and it's to slow to stream all > that data. > > So I installed backuppc on the remote server and setup rsync between the > two servers. The backups should "flow" in ca "cascade effect" to the > remote server now. What do more experienced users think of this setup? > > > > - > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ > ___ > BackupPC-users mailing list > BackupPC-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/backuppc-users > http://backuppc.sourceforge.net/ > - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/backuppc-users http://backuppc.sourceforge.net/
[BackupPC-users] 3.1.0beta0 - CGI Column sorting
The numeric columns appear to sort alphabetically. For example: Full Size (GB) 0.81 1.82 14.77 2.55 3.93 Mike - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/backuppc-users http://backuppc.sourceforge.net/
Re: [BackupPC-users] using backuppc to backupc another backuppc server
Re-read your post. Thought you said 300gb (that's what we have, give or take). I wouldn't run BackupPC on the remote server. Just do an rsync from the local to the remote. Then you only need an incoming SSH port on the other side. Setup ssh with keys between the two (get it so you can type ssh [EMAIL PROTECTED] and not need to input a password. There are varying degrees of debate about whether or not this is secure, but with proper firewalling (exclude access to port 22 except from "whichever" ip address(es)... http://www.linux.com/articles/113847 (start with the section on Automatic Backups, to configure the above).. The following is a script that I found somewhere, modified for my use / situation / then sanitized from there :) Change everything in <> and also make sure your ~/PATH/TO/KEYFILE is correct. #!/bin/sh DEST="" USER="" BACKDIR="" DESTDIR="" # Does copy, but still gives a verbose display of what it is doing OPTS="-v -u -a --rsh=ssh -i ~/PATH/TO/KEYFILE --exclude-from=$EXCLUDES --stats" # Copies and does no display at all. #OPTS="-a -u --rsh=ssh -i ~/PATH/TO/KEYFILE --exclude-from=$EXCLUDES --quiet" # May be needed if run by cron? export PATH=$PATH:/bin:/usr/bin:/usr/local/bin /bin/nice -19 rsync $OPTS $BACKDIR [EMAIL PROTECTED]:$DESTDIR [EMAIL PROTECTED] wrote: > I have backuppc running on my LAN, and I want to send the backups over a > T1 line to a remote server. I have about 30Gig of data on my backuppc > partition. I tried using an archive host and it's to slow to stream all > that data. > > So I installed backuppc on the remote server and setup rsync between the > two servers. The backups should "flow" in ca "cascade effect" to the > remote server now. What do more experienced users think of this setup? > > > > - > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ > ___ > BackupPC-users mailing list > BackupPC-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/backuppc-users > http://backuppc.sourceforge.net/ > > - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/backuppc-users http://backuppc.sourceforge.net/
[BackupPC-users] I don't understand Error Messages
hi~~ all I get error messages, but I don't understand Error Messages incr backup started back to 2007-09-04 01:00:05 (backup #28) for directory payment_etc Connected to lo-payment:873, remote version 28 Negotiated protocol version 28 Connected to module payment_etc Sending args: --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive . . Xfer PIDs are now 12721 [ skipped 193 lines ] Parent read EOF from child: fatal error! Done: 0 files, 0 bytes Got fatal error during xfer (Child exited prematurely) Backup aborted by user signal why I get error ?? thank you _ 언제 어디서나 편리한 MSN SMS 서비스를 이용하세요. http://im.msn.co.kr/new/function/function_01_02.asp - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/backuppc-users http://backuppc.sourceforge.net/
Re: [BackupPC-users] Got fatal error during xfer (fileListReceive failed)
Robert writes: > I removed the -v option from config.pl, restarted backuppc, this is the > log: > > Running: /usr/bin/ssh -q -l root robert-laptop /usr/bin/rsync --server > --sender --numeric-ids --perms --owner --group -D --links --times > --block-size=2048 --recursive -D --ignore-times . /home/ > Xfer PIDs are now 5985 > Got remote protocol 1651076184 > Fatal error (bad version): Xlib: connection to ":0.0" refused by server Ssh is saying "Xlib: connection to ":0.0" refused by server". Add the -x option to rsync (to disable X11 port forwarding). Note that the user's and global ssh_config override the command-line options, so if you get the same error you should disable X11 port forwarding there too. Craig - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ BackupPC-users mailing list BackupPC-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/backuppc-users http://backuppc.sourceforge.net/