[Bacula-users] Restores -- XP Client -- Bacula 1.38.8
I am having some problems with restores, or possible a mis-understanding of how restores work. I am running Bacula 1.38.8, both server (CentOS x86_64) and client. One of my clients is a Windows XP machine running the VSS enabled bacula client. Full backups run once weekly with incremental backups running the other days. All backups are done to disk storage device. When I tested restores orginally (only having on Full backup in the catalog), everything worked as expected. Now some time has passed and I have a catalog filled with several backups (full and incremental) for different clients. I tried using the wx-console app from the Windows XP machine to perform a restore. After selecting the tab for restores and going into restore mode, I entered all the information pertaining to the last full backup for this particular client including the FULL-pool and enterting a date one second after the Full backup in the Before: field. I marked several top-level sub-directories. Modified the job with the correct client, and kicked off the restore. Very few of the files actually restored. I tried this several times changing the directories, dates, Pools, etc., and I was never able to get all the files restored. I ran what I believe is the same restore from bconsole on the server and all files restored as expected. Is anyone else experiencing similar problems? If not, can you tell me what I am doing wrong? Thank You. -- --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Question: decision how tapes are choosed from a pool
Few days ago, I had almost the same question and Arno gave me the following volume cycle: because job count or size limit exceeded Append ---> Used ^ | | First Job writes to Retention time passed | | the volume and recycling takes | | place | | v Recycledwrote: Hi,I recently studied the Pool/Volumes section in the manual, but I didn'tfind a hint about which algorithm is running when bacula has to choosea tape from a pool for an actual job.Example (or my actual problem, you know ;-) - the system is an autochanger with barcode, 60 slots and 2 LTO-3 drives, Bacula version 1.38.7, running well with dozends of clients, in principle- there's a new pool with two freshly labeled, empty tapes - two jobs are scheduled at the same time, doing full backup in that pool the jobs have same priority et. al., only the client names differ- the first tape is loaded into drive 0, the first job completes successfully. The tape remains in the drive, with some 100 MBs written out and state "Append"- then, the second job unloads the tape, loads the other one in the same drive and writes to _that_ tape. Why? The first tape was OK and loaded! - finally I have both new tapes written, and will get some problems in future, because I want the two tapes used alternately using automatic volume retention and recycling. The parallel initial time stamp on the tapes will be confusing.I'm wondering if there's a clear algorithm in Bacula which decides tochoose some tape. I've got some more pools with similar configuration,and there, the tapes are (until today) used one after aneother. Regards,Robert++ German Research Center for Artificial Intelligence ++ Robert Wirth, Stuhlsatzenhausweg 3, D-66123 Saarbruecken@office: +49-681-302-5078/5572 ++ @fax: +49-681-302-5341mailto:[EMAIL PROTECTED] ++ http://www.dfki.de/~wirth---Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easierDownload IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642___Bacula-users mailing list Bacula-users@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Version error for database "bacula". Wanted 8, got 9
thank for your answer, but i think this is not the problem. I have create a new db on update time. So i don't have to update my database. ah, found the real problem. An old process, wasn't kill't. So my bacula runs on the old version. now all is fine thanks for help. maik Robert W Hartzell schrieb: > Maik Derstappen wrote: > >> hello, >> >> im upgrading my bacula from 1.36.2 to 1.38.9 on my debian machine. >> But i have the following error: >> >> Version error for database "bacula". Wanted 8, got 9 >> >> The Database was new created befor. >> >> can anyone help me pleas? >> >> cu maik > > > You probably need to update your database with > > update_bacula_tables > > There is a section in the manual concerning upgrading bacula versions. > > http://www.bacula.org/rel-manual/index.html > > -- > Robert > --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Re: Backuping Netware Server
Hello Heitor, Heitor Faria wrote: On the Red Hat Enterprise 4, i got a problem... (could not find the server). I search in the Internet and found the solution: # ipx_configure --auto_interface=on --auto_primary=on Than, i got another error - the Red Hat don´t recognize this command. Are you sure you are using IPX? ncpfs works well with TCP/IP, and most installations of Netware => 6 (maybe even 5.5) are using TCP/IP. Can anyone tell me how to solve this? I think there is a rpm package with ipx configurations tools that can save me... : / This is the command i'm using to mount our netware 6 server: ncpmount -t 300 -N NFS -y iso8859-15 -p cp850 -S \ -A -U the -A option swiches ncpmount into UDP mode, you must have a DNS entry for your server matching whatever you put in for DNS-servername because ncpmount still lacks SLP support. You can use the FQDN for DNS-servername if you wish. good luck, Nils --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] backing up snapshots?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I have not done it, but my assumption is that it's trivial. I have done it manually with other backup software. I would ClientRunBeforeJob to create the snapshot to a location, backup the location, and ClientRunAfterJob to destroy it. _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - User Support Spec. III |$&| |__| | | |__/ | \| _| |[EMAIL PROTECTED] - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/AST - NJMS Medical Science Bldg - C630 Alan Brown wrote: > > Has anyone used LVM/EVMS snapshots to get a stable image to backup? > > If so, how do you do it? > > AB > > > > --- > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job > easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > ___ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2.2 (MingW32) iD8DBQFEaK/pmb+gadEcsb4RAuLJAKCOIjt4X6G9WXdtIx2cK7Xi7Au7JQCeOE5d eZoaqpgF3SklN0Pv41VQq20= =vWOO -END PGP SIGNATURE- --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Bacula on SunFire280R / SPARC
Gabriele Bulfon wrote: Hello, I have bacula running on both recent Sun v20z / AMD64 and SunFire280R / SPARC. I recently discovered a different Bacula behaviour on the two platforms, with same OS, same Bacula version and same SCSI tape devices. - On v20z machines, the throughput of backups is generally around 4000-8000KB/s. - On 280R machines, the throughput of backups is much slower: around 2000KB/s on self backup (same SD/Director machine as the FD), 6000KB/s when backing up other Solaris FD machines, 100-400KB/s when backing up other Windows FD Machines! The low throughput happening when backing up the windows machines, causes the nightly jobs to finish too late (around 11AM) when these machines have a lot of GB of data. So I checked for differences between the v20z and the 280R configurations, and discovered this strange thing: - if I run "tapeinfo -f /dev/rmt/0" on a v20z, the first line shows "Product Type: Tape Drive". - if I run "tapeinfo -f /dev/rmt/0" on a 280R, the first line shows "Product Type: Disk Drive". How comes that the 280R returns such a wrong information? May the slow throughput be a consequence of this wrong setting? If not, what can be causing this slow throughput? bash-2.05# ./tapeinfo -f /dev/rmt/0 Product Type: Tape Drive Have you tried rebooting and running a probe-scsi-all from the OBP? Though on my Sun E220R I see only around 2000Kb/sec for a local backup due to the rather poor IO speeds. I see around 5000Kb/sec from slower machine across the network. The IO Speed on my 220R is only 40Mb/sec across the SCSI controller so take this into account. --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Version error for database "bacula". Wanted 8, got 9
hello, im upgrading my bacula from 1.36.2 to 1.38.9 on my debian machine. But i have the following error: Version error for database "bacula". Wanted 8, got 9 The Database was new created befor. can anyone help me pleas? cu maik --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] How to afront the error:263 Buffer discarded...?
Hi people. I have right now running bacula 1.38.5 on freebsd 5.4-p10, next week i will upgrade to 1.38.9, but right now ihas this little problem. On some tapes if i run the command "mount" on bconsole, give the error: MueblexBDC.2006-05-15_16.59.02 Error: block.c:263 Volume data error at 0:0! Wanted ID: "BB02", got "". Buffer discarded.15-May 16:59 bacula-sd: Labeled new Volume "FullTape-0003" on device "StorageWorks-232" (/dev/nsa0). They 2 tapes, the others dosent show me this message, i have read some mails where this error appear, but i want to know:1; Those tapes are already damage, send them to the garbage?2; Wish test process i can do on those tapes to check if i can trust my data on them...? They are only 2 tapes, but one of them have one Full Backup with 6 jobs and the amount of data is 106GB, i test the tape with the restore command and the files where ok, them all my data is ok..? This all my doubt, any suggestion about will be apreciate. Thanks all for your time, greetings.
Re: [Bacula-users] backup fails when scheduled, works when run by hand
On Fri, May 12, 2006 at 01:07:14PM +0100, Alex Finch wrote: > > bacula: 1.38.5 (18 January 2006) > > mysql: 3.23.58 Okay, that version of mysql is definately too old to be the glitch that was fixed in bacula 1.38.7. Your best bet is probably to run through some of the suggestions at http://dev.mysql.com/doc/refman/4.1/en/gone-away.html -- Frank Sweetser fs at wpi.edu | For every problem, there is a solution that WPI Network Engineer | is simple, elegant, and wrong. - HL Mencken GPG fingerprint = 6174 1257 129E 0D21 D8D4 E8A3 8E39 29E3 E2E8 8CEC --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
RE: [Bacula-users] backing up snapshots?
> I do it under CentOS-4 with xfs and ext3 filesystems using the > ClientRunBefore and ClientRunAfter directives in the job file. I mount > the snapshots under /mnt and have those mountpoints in the fileset. It > would be nice to be able to strip a path-prefix and and I believe that > this is on the list of features to be implimented. This is one feature that would enable me to restore a backup of a win32 C:\ drive to D:\, so would be very handy. I look forward to it! Thanks James --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid0709&bid&3057&dat1642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] backup (and restore) of ntfs filesystem under Linux
I think the answer is probably no, but is it possible using the current Linux NTFS driver to do a backup of an NTFS filesystem in such a way that it is indistinguishable from a win32 backup of the same drive? And more importantly, if NTFS writing actually worked properly, would it be possible to do a restore of a win32 (not in portable mode) backup under Linux? Thanks James --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid0709&bid&3057&dat1642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] contradicting volume requests
How can I resolve this situation? Volume 81 is currently loaded but it is not acceptable. Bacula somehow wants volume 84, which is also not acceptable for some reason... *m 13-May 10:07 yangtse-sd: Backup_yangtse-system.2006-05-13_01.05.00 Warning: Director wanted Volume "84" for device "Drive0" (/dev/ rmt/0cbn). Current Volume "81" not acceptable because: 1998 Volume "81" status is Full, but should be Append, Purged or Recycle. 13-May 10:07 yangtse-sd: Please mount Volume "81" on Storage Device "Drive0" (/dev/rmt/0cbn) for Job Backup_yangtse-system. 2006-05-13_01.05.00 This is bacula-1.38.6 -Sebastian --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] virus in winbacula-1.38.9.exe?
On 7 May 2006 at 19:10, Christian Buhtz wrote: > I downloaded winbacula-1.38.9.exe and tried to install it under Win98se. > > There is a AntiVir (searchengine: 7.00.00.08; virusdef: 6.34.01.44 > 5.5.06) installed. It told me that > > C:\BACULA\BIN\BACULA-FD.EXE > > has suspiciously code: HEURISTIC/Backdoor.Generic > > > What is about that? I think this is a repeat of post already dealt with. The report is a false postive. AFAIK. -- Dan Langille : Software Developer looking for work my resume: http://www.freebsddiary.org/dan_langille.php --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Filesystem library
Hello! How can i use filesystem library for traverse a file hierarchy? Could u give me some example? Thank You! --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
RE: [Bacula-users] tape drive recommendation
Be very wary about Linux and IDE Tape Drives. I bought a Sony SDX-560 (IDE, 80/208 GB, 12MB/s) for 800 US$. Unfortunately it would only work using PIO mode on Linux even though DMA mode worked fine on Windows. There is a SATA version of this drive that I haven't tried, but suspect it would work better than the IDE one. I ended up buying the SCSI version SDX-550 for about the same price as the IDE one. The SCSI one works great but cost me an additional 100 US$ for a Ultra 160 SCSI card. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mario Ohnewald Sent: Saturday, April 29, 2006 10:48 AM To: bacula-users@lists.sourceforge.net Subject: [Bacula-users] tape drive recommendation Hello List, i am looking for a cheap IDE Tape drive which holds about 20GB uncompressed data. It has to run smoothly with linux/bacula. Internal or external does not matter. Could anyone recommend me one? Do i need to provide more info? Thanks, Mario --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] backing up snapshots?
On Mon, 15 May 2006, Alan Brown wrote:
Has anyone used LVM/EVMS snapshots to get a stable image to backup?
If so, how do you do it?
I do it under CentOS-4 with xfs and ext3 filesystems using the
ClientRunBefore and ClientRunAfter directives in the job file. I mount
the snapshots under /mnt and have those mountpoints in the fileset. It
would be nice to be able to strip a path-prefix and and I believe that
this is on the list of features to be implimented.
For creating and deleting the snapshots I use a script that I install
in /usr/local/sbin on the clients. It could certainly be improved and
may have some things specific to RedHat-deerived distros. I am
appending my script. Comments are welcome.
In job directive:
# Create a snapshot with a 4G for COW space
ClientRunBeforeJob = \
"/usr/local/sbin/snapshot -L 4G /export/home /mnt/home"
FileSet = "mnt_home"
# Delete the snapshot
ClientRunAfterJob = \
"/usr/local/sbin/snapshot -d /mnt/home"
On the client as /usr/local/sbin/snapshot:
#!/bin/bash
# Create or delete a snapshot using LVM
# The logical-volume name has SS_ prependend to the target.
# e.g. A snapshot of /dev/vg0/home is created as /dev/vg0/SS_home
set -o errexit
PATH="/sbin:/bin:/usr/sbin:/usr/bin"
function GetLogVol()
{
local LOGVOL
# Determine the logical-volume path from the mount point
LOGVOL=$(mount | awk -v p=$1 '$3 == p {print $1}')
if [[ -z "$LOGVOL" ]]; then
echo "${0}: $1 not a mount point" 1>&2
exit 1
fi
if [[ $(dirname $LOGVOL) == "/dev/mapper" ]]; then
LOGVOL=$( find /dev -lname $LOGVOL )
fi
# Check that this is a LV
if ! lvs $LOGVOL > /dev/null 2>&1; then
echo "${0}: $LOGVOL is not a logical volume" 1>&2
exit 1
fi
echo "$LOGVOL"
}
# Default snapshot size of 2GB
SSSZ="2G"
CREATE_SNAP=true
if getopts L:d option
then
case $option in
L) SSSZ="$OPTARG"
shift 2
;;
d) CREATE_SNAP=false
;;
?) exit 1
;;
esac
fi
if (( $# != 2 )); then
echo "Usage: $0 [-L size] FileSystemPath SnapshotPath" 1>&2
echo "___or: $0 -d SnapshotPath" 1>&2
exit 1
fi
SSPATH="$2"
if $CREATE_SNAP ; then
FSPATH="$1"
FSLV=$(GetLogVol $FSPATH)
FSTY=$(mount | awk -v p=$FSPATH '$3 == p {print $5}')
[[ "$FSTY" == xfs ]] && FSTY="xfs -o nouuid"
SSNM=SS_$(basename $FSLV)
SSLV=$(dirname $FSLV)/$SSNM
modprobe dm-snapshot
lvcreate --size "$SSSZ" --snapshot --name $SSNM $FSLV
mkdir -p $SSPATH
mount -v -r -t $FSTY $SSLV $SSPATH
else
SSLV=$(GetLogVol $SSPATH)
# Check that this LV is a snapshot
SSLV_ATTR=$(lvs --noheadings -o lv_attr $SSLV)
if [[ "$SSLV_ATTR" != *s* ]]; then
echo "${0}: $SSPATH is not a snapshot" 1>&2
exit 1
fi
umount -v $SSPATH
lvremove -f $SSLV
rmdir --ignore-fail-on-non-empty $SSPATH
fi
---
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Re: make problem
Hi, On 5/16/2006 9:14 PM, Timo Neuvonen wrote: I was looking to change our backup software and ran accross Bacula. It looked interesting, so I thought I'd give it a try. Fresh install of FC5 My make fails in the dird, stored and tool directory. I've installed mysql and ran the bacula supplied scripts to set permissions and create database and tables. I would recommend you to use rpm packages, they should install nicely to FC5. If you definetely want to build by yourself, maybe you could leave this until (not if!) you've decided to seriously start using Bacula. Propably tomorrow? ;-) Seriously, I think it's not a good idea to install self-compiled non-rpm binaries, when you don't have to. I guess the "not have to" part is what can be discussed a lot... There are some software packages I usually install from source, and I think I have god reasons to do so (in well defined cases). But that's not what I wanted to discuss now :-) So, when it's time to build by yourself, maybe you should conseder building a rpm of your own instead? Bacula rpm source package contains everyting you need but a simple rpmbuild command with a couple of options (to define the use of FC4 and mysql4, yes it's ok for FC5 + mysql5 too) John, what we'd need is output showing the errors. I suspect that you have messages concenring libbac IIRC, and I suspect that you did 'configure; make install'. If that's the case, try 'configure && make && make install' instead. If thats been the problem I know the answer because this has been discussed more than once recently on this list. Arno -- TiN --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users -- IT-Service Lehmann[EMAIL PROTECTED] Arno Lehmann http://www.its-lehmann.de --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] RE: [Bacula-devel] [Fwd: SUBJECT: SourceForge.net: CVS service offering changes]
For those of you not that familiar with sed here are the commands.
You need to cd to the parent of the directory where you checked out the
bacula module.
Windows using GNUWin32 with cmd.exe as the shell
find bacula -name CVS -exec sed -ie "s/@cvs\./@bacula.cvs./" {}/Root
^;
*nix or Windows using cygwin
find bacula -name CVS -exec sed -ie "s/@cvs\./@bacula.cvs./" {}/Root
\;
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kern Sibbald
Sent: Tuesday, May 16, 2006 8:42 AM
To: [EMAIL PROTECTED];
[EMAIL PROTECTED]; bacula-users@lists.sourceforge.net
Subject: [Bacula-devel] [Fwd: SUBJECT: SourceForge.net: CVS service offering
changes]
Hello,
If you are currently using the CVS, please take a careful look at the
following email from Source Forge.
At the moment, I won't have time to try the CVS until after the 20th, but
I suspect for those of you who are a bit knowledgeable concerning CVS can
find a way to apply the appropriate sed command to the appropriate files
within all the CVS directories in an existing CVS tree, thus avoiding the
requirement to check out a new copy if you don't want
Original Message
Subject: SUBJECT: SourceForge.net: CVS service offering changes
From:"SourceForge.net Team" <[EMAIL PROTECTED]>
Date:Fri, May 12, 2006 2:06 am
To: [EMAIL PROTECTED]
--
Greetings,
You are receiving this mail because you are a project admin for
a SourceForge.net-hosted project. One of our primary services,
CVS, suffered a series of interrelated, critical hardware failures
in recent weeks. We understand how frustrating this CVS outage
must be to you and your users; however, our top priority remains
preservation of the integrity of your data.
The series of CVS hardware failures prompted us to expedite the
deployment of planed improvements to our CVS infrastructure,
drawing upon much of the knowledge that we gained from our
Subversion deployment. Our improved CVS service architecture,
which we plan to deploy tomorrow afternoon (2006-05-12), will
offer greater performance and stability and will eliminate several
single points of failure.
The Site Status page (https://www.sf.net/docs/A04) will be
updated as soon as the new infrastructure is rolled out. In the
interim, please read the important information provided below
to learn about how these changes will affect your project.
Summary of changes, effective 2006-05-12:
1. Hostname for CVS service
Old: cvs.sourceforge.net
New: PROJECT_UNIX_NAME.cvs.sourceforge.net
This change will require new working copies to be checked out of all
repositories (so control files in the working copy will point to the
right place). We will be updating the instructions we supply, but
instructions that your team has written within documentation, etc. will
need to be updated.
cvs -d:pserver:[EMAIL PROTECTED]:/cvsroot/gaim co gaim
would be changed to
cvs -d:pserver:[EMAIL PROTECTED]:/cvsroot/gaim co gaim
2. ViewCVS
We are moving from ViewCVS to its successor, ViewVC. ViewVC is
currently in use for our Subversion service.
3. Sync delay
Old: CVS pserver, tarballs and ViewCVS provided against a separate
server which is a minimum of three hours behind developer CVS.
New: ViewVC will be provided against developer CVS (it will be current).
CVS pserver will be provided against a secondary server (not developer
server) with a maximum expected delay of two hours.
Follow-up work is planned (this infrastructure takes us 80% of the way)
to essentially eliminate the sync delay.
4. Read-only rsync service
As a new service offering, we are now providing read-only rsync access
against developer CVS. This allows projects to efficiently make
on-demand backups of their entire CVS repository.
All projects should be making regular backups of their CVS repository
contents using this service.
5. Nightly tarball service
Nightly tarball service is being dropped in lieu of read-only rsync
service. Projects which currently depend on nightly tarballs for
repository backups will need to begin using rsync to make a backup copy
of their repository contents.
We see this as a major functional improvement. For a number of reasons,
tarballs have fallen out of sync with the data in the repository at
times in the past few years. Tarballs required a substantial amount of
additional disk, and I/O to generate. The move to read-only rsync
allows backups to be produced on-demand, with an update frequency chosen
by the project.
6. Points of failure
In the past, developer CVS service for all projects was provided from a
single host. CVS pserver service was provided from individual backend
heads based on a split of the data.
Under our new design, developer CVS and most of our CVS-related services
are provided from one of ten CVS hosts (count subject to increase with
growth). Each host i
[Bacula-users] Public CVS on SourceForge
It looks like SourceForge has resolved the issues with the public CVS. I just checked and it appears it is now up to date.
[Bacula-users] Fatal Error
Hi Anybody know what this error means? "webserver.2006-05-12_09.13.25 Fatal error: authenticate.c:140 Storage daemon rejected Hello command". Tks. Jr. --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Bacula with Sony SDX700C AIT-3.
ke, 2006-05-03 kello 17:45 -0300, Rodrigo_Albert_Fedosi kirjoitti: > I'm thinking in it implement the bacula in the company that work, but > I have a doubts regarding the support to our tape device. > > The tape device is a Sony SDX700C AIT-3. The bacula support this > device? In the documentation says nothing about him. I'm using Bacula with Sony SDX700C (attached to Qualstar RLS-4445 autochanger) -- works fine, at least on Linux-platform. BR, Mika --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Re: make problem
> I was looking to change our backup software and ran accross Bacula. It looked > interesting, so I thought I'd give it a try. > > Fresh install of FC5 > > My make fails in the dird, stored and tool directory. > > I've installed mysql and ran the bacula supplied scripts to set permissions and > create database and tables. > I would recommend you to use rpm packages, they should install nicely to FC5. If you definetely want to build by yourself, maybe you could leave this until (not if!) you've decided to seriously start using Bacula. Propably tomorrow? ;-) Seriously, I think it's not a good idea to install self-compiled non-rpm binaries, when you don't have to. So, when it's time to build by yourself, maybe you should conseder building a rpm of your own instead? Bacula rpm source package contains everyting you need but a simple rpmbuild command with a couple of options (to define the use of FC4 and mysql4, yes it's ok for FC5 + mysql5 too) -- TiN --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] virus in winbacula-1.38.9.exe?
Hi Christian, same on my workstations, but this time you don´t need to worry about: bacula-fd opens port 9102. Backdoors and trojans using similar procedures, that´s why Antivir moaning a bit. Greetings Andreas Christian Buhtz schrieb: > I downloaded winbacula-1.38.9.exe and tried to install it under Win98se. > > There is a AntiVir (searchengine: 7.00.00.08; virusdef: 6.34.01.44 > 5.5.06) installed. It told me that > > C:\BACULA\BIN\BACULA-FD.EXE > > has suspiciously code: HEURISTIC/Backdoor.Generic > > > What is about that? > > > > --- > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > ___ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users > --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid0709&bid&3057&dat1642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Waiting for client that is offline
Hi,
I'm running a bacula director and storage daemon on a Gentoo Linux
system at home (version 1.38.8). I've also installed a file daemon on
one of my Windows XP workstations (version 1.38.8). Bacula is properly
configured to backup this workstation, which works great by the way.
Only, when this Windows workstation is powered off, after 40 minutes I
get an error report from Bacula telling me that it could not reach the
client's file daemon and that it canceled the job. I was wondering if
there's a possibility to wait for an unlimited amount of time for the
workstation, without blocking other jobs to be run in the meantime?
Then, when you would power on the Windows workstation, it would begin a
backup at that moment.
At work I'm using Retrospect in a similar setup since we have many
portables. Whenever one of our employees connects its portable into the
network, and when no backup has been executed for the last 24 hours, a
backup is automatically started. It also has a nice feature to pop up a
notification that stays open for 20 seconds, which allows to defer the
backup for an amount of time from the client side.
I've searched in the manuals and found a "Max Wait Time" property (and
resp property for Incremental and Differential backup), but setting them
doesn't seem to have any effect. I still get the error mail after 40
minutes.
I've included the settings for the job below:
Job {
name = "avathar-3200"
Enabled = yes
JobDefs = "WindowsClientDefs"
Client = avathar-fd
FileSet = "avathar-3200"
# Wait a maximum of 23 hours
Max Wait Time = 82800
Incremental Max Wait Time = 82800
Differential Max Wait Time = 82800
Write Bootstrap = "/var/lib/bacula/Avathar3200.bsr"
}
Another possibility would be to wake up the client using ether-wake. You
could ping the workstation to see if it's online... wake it up when it's
not... make a backup... and power it down again. This way the backup
would be guaranteed to run each day. Has anybody done a successful job
at setting up something like this?
thanks,
Dimitri
begin:vcard
fn:Dimitri Goethals
n:Goethals;Dimitri
adr:;;Van Gorplaan 32;Putte;;2580;Belgium
email;internet:[EMAIL PROTECTED]
tel;work:+32 3 890 46 15
tel;home:+32 15 75 37 34
tel;cell:+32 485 96 33 18
x-mozilla-html:TRUE
version:2.1
end:vcard
Re: [Bacula-users] backing up snapshots?
Hello,
On 5/16/2006 3:39 PM, Frank Sweetser wrote:
On Mon, May 15, 2006 at 12:07:48PM +0100, Alan Brown wrote:
Has anyone used LVM/EVMS snapshots to get a stable image to backup?
If so, how do you do it?
There's a generic example on how you can do this with linux LVM on the wiki.
http://paramount.ind.wpi.edu/wiki/doku.php?id=application_specific_backups#linux_lvm_snapshots
One minor disadvantage, is that bacula will store the paths of the snapshot
mount point (ie, '/snapshot/data/' rather than '/data/').
Indeed a problem, but IIRC there was a suggestion during the last
"feature vote"... well, I recalled incorrectly, it seems.
Anyway, suggesting an enhancement to the "Where" option during restore
to strip leading path elements before applying the actual restore
location seems useful.
A first idea:
Where = "{1}/" would remove the first path element, so '/.snapshot/var'
would become '/var' again.
Escaping the special chars should be possible, even though I don't
expect to see many paths starting with {...
Arno
--
IT-Service Lehmann[EMAIL PROTECTED]
Arno Lehmann http://www.its-lehmann.de
---
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] backing up snapshots?
Hello, On 5/16/2006 6:56 AM, Silver Salonen wrote: Here comes the "client run after failed job" lacking feature again. Yes. I notice that a "Run after Failed Job" option exists - it should be possible to implement the client variant, too... I'm backing up FreeBSD snapshots and there have been cases where the server runs out of disk space after a failed job because of the snapshot that was not deleted. So I've been thinking to create some pseudo-job that would run after all the jobs (just like the job backing up catalog) and delete possibly existing snapshots with "client run before job" script. Interesting workaround, I never thought about that option. Arno On Monday 15 May 2006 19:44, Ryan Novosielski wrote: I have not done it, but my assumption is that it's trivial. I have done it manually with other backup software. I would ClientRunBeforeJob to create the snapshot to a location, backup the location, and ClientRunAfterJob to destroy it. _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - User Support Spec. III |$&| |__| | | |__/ | \| _| |[EMAIL PROTECTED] - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/AST - NJMS Medical Science Bldg - C630 Alan Brown wrote: Has anyone used LVM/EVMS snapshots to get a stable image to backup? If so, how do you do it? AB --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users -- IT-Service Lehmann[EMAIL PROTECTED] Arno Lehmann http://www.its-lehmann.de --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Directory /sd job strangeness
Is there any good command to figure out what's currently going on here? To me it looks like a deadlock, it's waiting for max Storage Jobs but nothing is running. [EMAIL PROTECTED]:/opt/bacula# echo stat dir|/opt/bacula/bconsole Connecting to Director sisko:9101 1000 OK: sisko-dir Version: 1.38.9 (02 May 2006) Enter a period to cancel a command. stat dir Using default Catalog name=MyCatalog DB=bacula sisko-dir Version: 1.38.9 (02 May 2006) x86_64-unknown-linux-gnu suse 10.0 Daemon started 15-May-06 11:13, 43 Jobs run since started. .. Running Jobs: JobId Level Name Status == 8345 FullBackup_diana.2006-05-15_12.00.56 has terminated 8354 Increme Backup_janeway.2006-05-16_03.05.00 has terminated 8355 FullBackup_diana.2006-05-16_03.05.01 has terminated 8356 Increme Backup_troy.2006-05-16_03.05.02 has terminated 8357 Increme Backup_yar.2006-05-16_03.05.03 is waiting on max Storage jobs 8358 Increme Backup_lister.2006-05-16_03.05.04 is waiting on max Storage jobs 8359 Increme Backup_kryten.2006-05-16_03.05.05 is waiting on max Storage jobs 8360 Increme Backup_smeghead.2006-05-16_03.05.06 is waiting on max Storage jobs 8361 Increme Backup_queeg.2006-05-16_03.05.07 is waiting on max Storage jobs 8362 Increme Backup_cat.2006-05-16_03.05.08 is waiting on max Storage jobs 8363 Increme Backup_picard.2006-05-16_03.05.09 is waiting on max Storage jobs 8364 Increme Backup_riker.2006-05-16_03.05.10 is waiting on max Storage jobs 8365 Increme Backup_w2jzgvnm02.2006-05-16_03.05.11 is waiting on max Storage jobs 8366 Increme Backup_sisko.2006-05-16_03.05.12 is waiting for higher priority jobs to finish 8367 FullBackupCatalog.2006-05-16_05.10.00 has been canceled 8368 FullBackup_picard.2006-05-16_07.16.18 is waiting on max Storage jobs *** [EMAIL PROTECTED]:/opt/bacula# echo stat storage=ADIC|/opt/bacula/bconsole Connecting to Director sisko:9101 1000 OK: sisko-dir Version: 1.38.9 (02 May 2006) Enter a period to cancel a command. stat storage=ADIC Using default Catalog name=MyCatalog DB=bacula Connecting to Storage daemon ADIC at sisko.intra.techwiz.ca:9103 sisko-sd Version: 1.38.9 (02 May 2006) x86_64-unknown-linux-gnu suse 10.0 Daemon started 15-May-06 11:13, 15 Jobs run since started. Running Jobs: No Jobs running. Jobs waiting to reserve a drive: Terminated Jobs: JobId Level Files Bytes Status FinishedName == 8347 Full347,430 8,067,260,320 OK 15-May-06 14:15 Backup_riker 8348 Full268,696 28,039,223,947 OK 15-May-06 15:14 Backup_troy 8345 Full 41,808601,713,239 OK 15-May-06 16:28 Backup_diana 8350 Full 60,421 15,146,696,425 OK 15-May-06 17:36 Backup_w2jzgvnm02 8351 Full609,439 65,517,813,718 Error15-May-06 20:17 Backup_picard 8352 Full609,290 66,381,971,655 Error16-May-06 02:42 Backup_picard 8355 Full 41,810602,160,391 OK 16-May-06 03:09 Backup_diana 8353 Full609,127 66,592,530,171 Error16-May-06 07:16 Backup_picard 8354 Incr344 32,257,457 OK 16-May-06 07:23 Backup_janeway 8356 Incr 1,022 1,518,039,696 OK 16-May-06 07:28 Backup_troy Device status: Autochanger "TL892" with devices: "TL0" (/dev/scsi/nsth5-1c0i4l0) Autochanger "ADIC" with devices: "DL0" (/dev/scsi/nsth6-2c0i1l0) Device "FileStorage" (/spare/bacula/File) is not open or does not exist. Device "DLT" (/dev/scsi/nsth5-1c0i4l0) is mounted with Volume="db0001" Pool="*unknown*" Total Bytes Read=0 Blocks Read=0 Bytes/block=0 Positioned at File=0 Block=0 Device "TL0" (/dev/scsi/nsth5-1c0i4l0) is not open or does not exist. Drive 0 is not loaded. Device "DL0" (/dev/scsi/nsth6-2c0i1l0) is mounted with Volume="INC001" Pool="Inc" Slot 20 is loaded in drive 0. Total Bytes=2,404,286,615 Blocks=37,271 Bytes/block=64,508 Positioned at File=3 Block=0 In Use Volume status: INC001 on device "DL0" (/dev/scsi/nsth6-2c0i1l0) db0001 on device "DLT" (/dev/scsi/nsth5-1c0i4l0) Data spooling: 0 active jobs, 0 bytes; 13 total jobs, 6,442,569,015 max bytes/job. Attr spooling: 0 active jobs, 0 bytes; 13 total jobs, 95,097,424 max bytes. -- --- Techwiz, Peter SjobergPGP key (12F506C8) on keyserver & homepage Key fingerprint = 3DC2 CEBA 1590 B41A 3780 955A DB42 02BB 12F5 06C8 mailto:peters AT techwiz.ca http://www.techwiz.ca/~peters --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.fal
[Bacula-users] ERR=Could not open file device .... No Volume name given.
Bacula Version: 1.32d ... I am testing an upgrade to the newest version on a test environmentOS: RedHat 7.3Backing up to a file on a harddriveI tried running a Backup Job, but recieved " Warning: device is BLOCKED due to user unmount."So I tried to mount the device, but received "ERR=Could not open file device /u01/backup/ky. No Volume name given. "Then I tried unmounting the device, but received "3901 Device /u01/backup/ky is already unmounted." I have also tried using the " add" command, but it didn't make any difference. I removed the device & volumes (from catalog + from harddisk), recreated the directory, and tried to label new volumes. I still get "3901 open device failed: ERR=Could not open file device /u01/backup/ky. No Volume name given."I have 22 servers configured the same way using Bacula, but this is the only one that is giving me this error. Any ideas? Has anyone had this issue before? This are the steps I followed:*Run KYUsing default Catalog name=MyCatalog DB=baculaRun Backup jobJobName: KYFileSet: KY Set Level: IncrementalClient: KY-fdStorage: KY-filePool: KY-poolWhen: 2006-05-16 09:38:14Priority: 10OK to run? (yes/mod/no): yesRun command submitted.*messages16-May-2006 09:38 NY-dir: No prior Full backup Job record found. 16-May-2006 09:38 NY-dir: No prior or suitable Full backup found. Doing FULL backup.16-May-2006 09:38 NY-dir: Start Backup JobId 3148, Job=KY.2006-05-16_09.38.2916-May-2006 09:38 KY-fd: ClientRunBeforeJob: Tue May 16 09:38:34 CDT 2006 16-May-2006 09:38 LA-sd: KY.2006-05-16_09.38.29 Warning: device is BLOCKED due to user unmount.*mountThe defined Storage resources are: 1: KY-file 2: LA-fileSelect Storage resource (1-2): 1 3901 open device failed: ERR=Could not open file device /u01/backup/ky. No Volume name given.*unmountUsing default Catalog name=MyCatalog DB=baculaThe defined Storage resources are: 1: KY-file 2: LA-fileSelect Storage resource (1-2): 13901 Device /u01/backup/ky is already unmounted.After deleting the device and the volumes, I tried recreating it. Here is the result:*labelThe defined Storage resources are: 1: KY-file 2: LA-fileSelect Storage resource (1-2): 1Enter new Volume name: KY1Defined Pools: 1: KY-pool 2: LA-poolSelect the Pool (1-2): 1Connecting to Storage daemon KY-file at LA:9103 ... Sending label command for Volume "KY1" Slot 0 ...3000 OK label. Volume=KY1 Device=/u01/backup/kyCatalog record for Volume "KY1", Slot 0 successfully created.Requesting mount KY-storage ... 3901 open device failed: ERR=Could not open file device /u01/backup/ky. No Volume name given.Do not forget to mount the drive!!!
Re: [Bacula-users] Problem with Python-Script "DirStartUp.py": Can't import "time"-module: Bacula disables python interpreter. -> Got around it! But thanks all the same!
Mit freundlichem Gruß i. A. Christoff Buch = [EMAIL PROTECTED] OneVision Software AG Dr.-Leo-Ritter-Str. 9 93049 Regensburg
Re: [Bacula-users] backing up snapshots?
On Mon, May 15, 2006 at 12:07:48PM +0100, Alan Brown wrote: > > Has anyone used LVM/EVMS snapshots to get a stable image to backup? > > If so, how do you do it? There's a generic example on how you can do this with linux LVM on the wiki. http://paramount.ind.wpi.edu/wiki/doku.php?id=application_specific_backups#linux_lvm_snapshots One minor disadvantage, is that bacula will store the paths of the snapshot mount point (ie, '/snapshot/data/' rather than '/data/'). -- Frank Sweetser fs at wpi.edu | For every problem, there is a solution that WPI Network Engineer | is simple, elegant, and wrong. - HL Mencken GPG fingerprint = 6174 1257 129E 0D21 D8D4 E8A3 8E39 29E3 E2E8 8CEC --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] OSx and backup levels
Did you ever get a response to your question? I am having the same problem, although it only is occurring on my Unix machines including Mac OS X. The windows machines have "incremental" recognized. -sarah -- View this message in context: http://www.nabble.com/OSx-and-backup-levels-t1092861.html#a4328772 Sent from the Bacula - Users forum at Nabble.com. --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] [Fwd: SUBJECT: SourceForge.net: CVS service offering changes]
Hello, If you are currently using the CVS, please take a careful look at the following email from Source Forge. At the moment, I won't have time to try the CVS until after the 20th, but I suspect for those of you who are a bit knowledgeable concerning CVS can find a way to apply the appropriate sed command to the appropriate files within all the CVS directories in an existing CVS tree, thus avoiding the requirement to check out a new copy if you don't want Original Message Subject: SUBJECT: SourceForge.net: CVS service offering changes From:"SourceForge.net Team" <[EMAIL PROTECTED]> Date:Fri, May 12, 2006 2:06 am To: [EMAIL PROTECTED] -- Greetings, You are receiving this mail because you are a project admin for a SourceForge.net-hosted project. One of our primary services, CVS, suffered a series of interrelated, critical hardware failures in recent weeks. We understand how frustrating this CVS outage must be to you and your users; however, our top priority remains preservation of the integrity of your data. The series of CVS hardware failures prompted us to expedite the deployment of planed improvements to our CVS infrastructure, drawing upon much of the knowledge that we gained from our Subversion deployment. Our improved CVS service architecture, which we plan to deploy tomorrow afternoon (2006-05-12), will offer greater performance and stability and will eliminate several single points of failure. The Site Status page (https://www.sf.net/docs/A04) will be updated as soon as the new infrastructure is rolled out. In the interim, please read the important information provided below to learn about how these changes will affect your project. Summary of changes, effective 2006-05-12: 1. Hostname for CVS service Old: cvs.sourceforge.net New: PROJECT_UNIX_NAME.cvs.sourceforge.net This change will require new working copies to be checked out of all repositories (so control files in the working copy will point to the right place). We will be updating the instructions we supply, but instructions that your team has written within documentation, etc. will need to be updated. cvs -d:pserver:[EMAIL PROTECTED]:/cvsroot/gaim co gaim would be changed to cvs -d:pserver:[EMAIL PROTECTED]:/cvsroot/gaim co gaim 2. ViewCVS We are moving from ViewCVS to its successor, ViewVC. ViewVC is currently in use for our Subversion service. 3. Sync delay Old: CVS pserver, tarballs and ViewCVS provided against a separate server which is a minimum of three hours behind developer CVS. New: ViewVC will be provided against developer CVS (it will be current). CVS pserver will be provided against a secondary server (not developer server) with a maximum expected delay of two hours. Follow-up work is planned (this infrastructure takes us 80% of the way) to essentially eliminate the sync delay. 4. Read-only rsync service As a new service offering, we are now providing read-only rsync access against developer CVS. This allows projects to efficiently make on-demand backups of their entire CVS repository. All projects should be making regular backups of their CVS repository contents using this service. 5. Nightly tarball service Nightly tarball service is being dropped in lieu of read-only rsync service. Projects which currently depend on nightly tarballs for repository backups will need to begin using rsync to make a backup copy of their repository contents. We see this as a major functional improvement. For a number of reasons, tarballs have fallen out of sync with the data in the repository at times in the past few years. Tarballs required a substantial amount of additional disk, and I/O to generate. The move to read-only rsync allows backups to be produced on-demand, with an update frequency chosen by the project. 6. Points of failure In the past, developer CVS service for all projects was provided from a single host. CVS pserver service was provided from individual backend heads based on a split of the data. Under our new design, developer CVS and most of our CVS-related services are provided from one of ten CVS hosts (count subject to increase with growth). Each host is independent, and makes a backup copy of the repository data of another host (which is used to provide the pserver CVS service). Failure of a single host will impact only the availability of data on that host. Since the data is split among a larger number of hosts, the size of data impacted by an individual host outage is substantially smaller, and the time required for us to restore service will be substantially shorter. This rapid architecture change has been made possible specifically using the research we performed for our recent launch of Subversion service. We've applied our best practices, produced a substantial amount of internal documentation, and kept an eye toward maintainability.
[Bacula-users] bacula-1.38.9 rpm packages released
Bacula-1.38 RPM Release Notes 06 May 2006 D. Scott Barninger The Gnome2 console currently will not build on older versions of Gtk2 (< 2.4) so you will see some missing gconsole packages. You _should_ be able to keep your gconsole package at 1.38.8 without problems if you upgrade since this release only incorporates minor bug fixes. If you are rebuilding the src rpm use the nobuild_gconsole switch. Release 1.38.9-1 This release incorporates a number of significant changes. These release notes refer to the rpm packaging only. Please refer to the release notes and changelog in the tarball or on sourceforge for complete information on all changes. *** * WXWindows console added * *** A new package bacula-wxconsole has been added. Building this requires wxGTK >=2.6 currently available on SuSE 10.0 and Fedora Core 4. * * Fix for daemon user/group problem * * Prior to the 1.38.8 release the pre-install scripts attempted to create the user bacula with primary group as both bacula and disk which failed. There was still a problem with these scripts in 1.38.8, noted in bug 605, on RedHat platforms which by default attempt to create a group with same name as the user (bacula) and failed because it had already been created. This has (I think) now been corrected with the addition of the -g parameter to the useradd commands and should work. ** * Build switch to turn off gnome console * ** If you do not wish to build gnome console --define "nobuild_gconsole 1" when rebuilding the srpm. ** * Mtx change * ** Mtx is no longer included in the server package, but is packaged separately for systems without an mtx package. *** * Database update * *** The 1.38 release requires an update to the bacula database structure from version 8 to version 9. A pre-install routine has been added to check for databases older than 8. In that event the install will exit with an error message indicating that the database must be updated to version 8 before installing this upgrade. Scripts for updating older database formats are available for download in the bacula-updatedb rpm package. In the event a version 8 database is detected a post-install routine will update the database after creating a backup file in the bacula working directory. * * Rescue package change * * The cdrom rescue scripts are now included in the 3 server and client packages and the bacula-rescue package is obsoleted. You should uninstall bacula-rescue if installed before upgrading. ** * Platform Notes * ** RedHat 7.x gconsole package is eliminated with this release due to the elimination of support for gnome 1. The spec file currently supports building on the following platforms: # RedHat builds --define "build_rh7 1" --define "build_rh8 1" --define "build_rh9 1" # Fedora Core build --define "build_fc1 1" --define "build_fc3 1" --define "build_fc4 1" # Whitebox Enterprise build --define "build_wb3 1" # RedHat Enterprise builds --define "build_rhel3 1" --define "build_rhel4 1" # CentOS build --define "build_centos3 1" --define "build_centos4 1" # SuSE build --define "build_su9 1" --define "build_su10 1" # Mandrake 10.x build --define "build_mdk 1" # Mandriva build --define "build_mdv 1" *** * Other build options * *** Database support (must select one) MySQL support: --define "build_mysql 1" # OR if using mysql 4.x define this # currently: Mandrake 10.x, SuSE 9.x & 10.x, RHEL4, fc4 --define "build_mysql4 1" PostgreSQL support: --define "build_postgresql 1" Sqlite support: --define "build_sqlite 1" Supress build of Gnome Console: --define "nobuild_gconsole 1" Enable X86-64 support --define "build_x86_64 1" Enable wxconsole: --define "build_wxconsole 1" --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] backup fails when scheduled, works when run by hand
I have one backup job which always failed when run by the scheduler, and works
fine if I run it by hand. Is that wierd or what?
When run by the scheduler I get:
12-May 10:30 lapf-dir: Roger_Jones_Laptop.2006-05-12_10.30.00 Fatal error:
sql_create.c:85 sql_create.c:85 insert I
NSERT INTO Job (Job,Name,Type,Level,JobStatus,SchedTime,JobTDate) VALUES
('Roger_Jones_Laptop.2006-05-12_10.30.00',
'Roger Jones Laptop','B','I','C','2006-05-12 10:30:00',1147426200) failed:
Lost connection to MySQL server during query
12-May 10:30 lapf-dir: sql_create.c:85 INSERT INTO Job
(Job,Name,Type,Level,JobStatus,SchedTime,JobTDate) VALUES ('
Roger_Jones_Laptop.2006-05-12_10.30.00','Roger Jones
Laptop','B','I','C','2006-05-12 10:30:00',1147426200)
12-May 10:30 lapf-dir: Roger_Jones_Laptop.2006-05-12_10.30.00 Fatal error:
sql_create.c:87 Create DB Job record INS
ERT INTO Job (Job,Name,Type,Level,JobStatus,SchedTime,JobTDate) VALUES
('Roger_Jones_Laptop.2006-05-12_10.30.00','R
oger Jones Laptop','B','I','C','2006-05-12 10:30:00',1147426200) failed.
ERR=Lost connection to MySQL server during
query
By hand it runs just fine.
I back up two users' laptops with the same job definition, the other one works
ok.
Relevant entries in bacula-dir.conf:
JobDefs {
Name = "DefaultLaptopJob"
Type = Backup
Level = Incremental
Client = lapf-fd
Schedule = "LaptopCycle"
Storage = "SONY Library"
Messages = Standard
Pool = Default
Priority = 10
#
# try to run every 15minues during the day
# if a previous backup of a higher level failed, run that instead
# i.e. if we are scheduled to run a differential but the last full
# failed run that instead
#
Rerun Failed Levels = yes
Reschedule On Error = yes
Reschedule Interval = 15m
Reschedule Times = 28
}
#
#Schedule that runs during the day, when laptops might be connected!
#
Schedule {
Name = "LaptopCycle"
Run = Full 1st Fri at 10:30
Run = Differential 2nd-5th Fri at 10:30
Run = Incremental mon-fri at 10:30
}
#
--
Alex Finch, Research Fellow, Physics Department, Lancaster University.
+44 (0) 1524 593618 http://www.lancs.ac.uk/depts/physics/staff/ajf.htm
---
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Problem with Python-Script "DirStartUp.py": Can't import "time"-module: Bacula disables python interpreter.
Dear users, as the subject says, bacula disables the python interpreter if I try to import the time - module (which I need). Has anyone any idea or experience with this? Thanks a lot! Best Regards, i. A. Christoff Buch = [EMAIL PROTECTED] OneVision Software AG Dr.-Leo-Ritter-Str. 9 93049 Regensburg
[Bacula-users] backing up snapshots?
Has anyone used LVM/EVMS snapshots to get a stable image to backup? If so, how do you do it? AB --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Re: Re: Examples on the website
"Manpreet Singh Nehra" <[EMAIL PROTECTED]> kirjoitti viestissä news:[EMAIL PROTECTED] > Timo Neuvonen wrote: > > >> So what I'm suggesting is that we submit some of our own configs (with > >> relevant secure data excluded) to the website so that they can build up > >> a good list of configurations for people to use. > >> > >> What do people think? Would they find this beneficial. > >> > >> > > I think there are some examples in the manual, but in my opinion this idea > > sounds excellent. Maybe this could be discussed as a part of a bigger > > project: how to develop Bacula's documentation in general? Currently, there > > is very much very precise and up-to-date information in the manual, but it > > is getting more and more difficult to find the correct piece of information > > from that manual -unless you don't exactly know beforehand, what you are > > looking for :-( > > > > Anyway, there needs to be sufficient explanation of the example confs too, a > > conf file alone is not of big help yet. Each conf (or a piece of conf) > > should be well-commented, either within the conf file or in a separate > > explanation. And absolutely not huge amount of alternate commented-out > > configurations (that maybe were tried some day) in the examples. > > > > > I have been using bacula for a year now, before setting up a small > config I started by reading the whole manual. Now I know where to look > for what when i need to. I think if we post our configs, it no doubt > will help people find it easier to setup bacula but in the end we are > going to face more questions "I followed such-n-such config but it > doesn't work" and the infamous RTFM reply. > > My 2 cents > > Manpreet Singh Nehra > Systems and Network Administrator. > > > > --- > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Version error for database "bacula". Wanted 8, got 9
Maik Derstappen wrote: hello, im upgrading my bacula from 1.36.2 to 1.38.9 on my debian machine. But i have the following error: Version error for database "bacula". Wanted 8, got 9 The Database was new created befor. can anyone help me pleas? cu maik --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users Did you read the directions? If so, you missed a rather clear indication that you need to run a database upgrade script before attempting to use your updated copy of bacula. If you already did run this script, you have a different problem, but it would have been helpful if you had mentioned that in your e-mail. -- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | | Ryan Novosielski - User Support Spec. III |$&| |__| | | |__/ | \| _| | [EMAIL PROTECTED] - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.| IST/AST - NJMS Medical Science Bldg - C630 begin:vcard fn:Ryan Novosielski n:Novosielski;Ryan org:UMDNJ;IST/Academic Systems and Technologies adr;dom:MSB C630;;185 South Orange Avenue;Newark;NJ;07103-2757 email;internet:[EMAIL PROTECTED] title:185 South Orange Avenue tel;work:(973) 972-0922 tel;fax:(973) 485-2612 x-mozilla-html:FALSE version:2.1 end:vcard
[Bacula-users] Retaining incremental with full backups
Good morning - I've not yet started using Bacula, but I'm getting ready to. I'm very impressed with how it works, and the documentation is clear and concise - even without having used bacula yet, I'm very impressed. One thing that I did not see in the documentation was how I could retain a set of incremental backups, with a full backup. What I'd like to do is do one full backup nightly, and then incremental backups every four hours, until the next nightly backup. I'd like to retain these incremental backups for as long as I retain their corresponding full backup. I'd like to have at least ten days' worth of these "sets". I did not see this type of setup in the documentation. If anyone would care to explain this to me, I would greatly appreciate it. Thanks! -dant --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Write Error
Am Montag, 15. Mai 2006 18:33 schrieben Sie: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > Did you ever do the 'btape' tests that are discussed in the manual and > tune your Device spec based on the returns from that command? Yes , of course. In the meantime I found that it is no bacula problem. There is only one possible constellation in FreeBSDs sa driver in this context. The driver asks for the Position (scsi_read_position) and the answer is : SA_RPOS_UNCERTAIN In this case the driver sets the error code : Invalid argument We are exchanging some hardware now. Thomas > > _ _ _ _ ___ _ _ _ > > |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - User Support Spec. III > |$&| |__| | | |__/ | \| _| |[EMAIL PROTECTED] - 973/972.0922 (2-0922) > > \__/ Univ. of Med. and Dent.|IST/AST - NJMS Medical Science Bldg - C630 > > Thomas Franz wrote: > > Hello, > > > > with about the half of my tapes , bacula doesn't write > > the full capacity and ends with something like this: > > > > 05-May 13:06 backup-sd: Backup.2006-05-05_11.05.00 Error: block.c:552 > > Write error at 1108:12049 on device /dev/nsa2. ERR=Invalid argument. > > 05-May 13:06 backup-sd: End of medium on Volume "A00010" > > Bytes=1,099,510,936,757 Blocks=17,043,520 at 05-May-2006 13:06. > > > > Are there any experiences with this behavior? Does it indicates to > > harware or a batch of corrupt tapes or still software? Any data lost? > > > > There are no other hints in /var/log/messages or other files. > > > > A second question: > > I tried to check such tapes with bls and bscan. With bscan I've got > > the following: > > . > > 09-May 15:36 bscan: Got EOF at file 98 on device /dev/nsa2, Volume > > "A8" 09-May 15:36 bscan: Got EOF at file 99 on device /dev/nsa2, > > Volume "A8" 09-May 15:36 bscan: Got EOF at file 100 on device > > /dev/nsa2, Volume "A8" 09-May 15:37 bscan: Got EOF at file 101 on > > device /dev/nsa2, Volume "A8" bscan: bscan.c:546 Could not find > > SessId=13 SessTime=1144758273 for EOS record. > > 09-May 15:37 bscan: Got EOF at file 102 on device /dev/nsa2, Volume > > "A8" bscan: bscan.c:462 3099377 "errors" ignored before first Start > > of Session record. > > bscan: bscan.c:472 SOS_LABEL: Found Job record for JobId: 0 > > 09-May 15:37 bscan: Got EOF at file 103 on device /dev/nsa2, Volume > > "A8" bscan: bscan.c:472 SOS_LABEL: Found Job record for JobId: 0 > > 09-May 15:37 bscan: Got EOF at file 104 on device /dev/nsa2, Volume > > "A8" 09-May 15:38 bscan: Got EOF at file 105 on device /dev/nsa2, > > Volume "A8" 09-May 15:38 bscan: Got EOF at file 106 on device > > /dev/nsa2, Volume "A8" 09-May 15:38 bscan: Got EOF at file 107 on > > device /dev/nsa2, Volume "A8" > > What does it mean? > > > > We are using bacula 1.36.3 on a FreeBSD 4.11 machine. The backup > > hardware is an EXABYTE Changer with an IBM LTO-3 drive. > > > > Thanks a lot. > > > > Thomas Franz > > > > > > > > --- > > Using Tomcat but need to do more? Need to support web services, security? > > Get stuff done quickly with pre-integrated technology to make your job > > easier Download IBM WebSphere Application Server v.1.0.1 based on Apache > > Geronimo http://sel.as-us.falkag.net/sel?cmd=k&kid0709&bid&3057&dat1642 > > ___ > > Bacula-users mailing list > > Bacula-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/bacula-users > > -BEGIN PGP SIGNATURE- > Version: GnuPG v1.4.2.2 (MingW32) > > iD8DBQFEaK13mb+gadEcsb4RAkqeAJ982+y2Yu3ANG0CmJ5mW++Iz/UcOgCfe2Jn > RrvIxHx4I14GWCMmGJtiBOo= > =ZSWj > -END PGP SIGNATURE- --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] OSx and backup levels
Sarah, Never saw a reply. I've not run into those problems running 1.38.x compiled on 10.4.x (3 machines) and one XP FD backing up to OS X box. What setup are you running? Erich On May 15, 2006, at 9:00 AM, sqe wrote: Did you ever get your problem fixed? I am having the same problem, and did not see a resolution posted anywhere? -sarah -- View this message in context: http://www.nabble.com/OSx-and-backup- levels-t1092861.html#a4392359 Sent from the Bacula - Users forum at Nabble.com. --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel? cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] backup fails when scheduled, works when run by hand
On Fri, May 12, 2006 at 10:56:36AM +0100, Alex Finch wrote:
>
> I have one backup job which always failed when run by the scheduler, and
> works fine if I run it by hand. Is that wierd or what?
>
> When run by the scheduler I get:
>
> 12-May 10:30 lapf-dir: Roger_Jones_Laptop.2006-05-12_10.30.00 Fatal error:
> sql_create.c:85 sql_create.c:85 insert I
> NSERT INTO Job (Job,Name,Type,Level,JobStatus,SchedTime,JobTDate) VALUES
> ('Roger_Jones_Laptop.2006-05-12_10.30.00',
> 'Roger Jones Laptop','B','I','C','2006-05-12 10:30:00',1147426200) failed:
> Lost connection to MySQL server during query
What version of bacula and what version of mysql are you running?
--
Frank Sweetser fs at wpi.edu | For every problem, there is a solution that
WPI Network Engineer | is simple, elegant, and wrong. - HL Mencken
GPG fingerprint = 6174 1257 129E 0D21 D8D4 E8A3 8E39 29E3 E2E8 8CEC
---
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Verify the backup before the latest one...
Afternoon, Is it possible to perform a VolumetoCatalog verify job of a backup other than the most recent one? My Bacula setup performs full backups on Friday nights and backs up 10 servers. It does incremental backups on the other nights of the week. I want to setup a scheduled verify job of some of the servers to confirm the data has been successfully written to tape. However, the time required to perform the backups and then verify some of them exceeds 24 hours - this impacts the scheduled start time of my incremental backups. I have a max wait time of 23hours set on all my jobs so they should abort before the incrementals begin, however if a long verify job is in progress this delays the incrementals - however that's another issue. My latest plan was to delay the verification of the full backups until Sunday after the incrementals have completed, however I cant find any way to specify that I want to verify the last full backup or the second last backup or even jobid = xx. Trying to run a verify thru bconsole I get the option to specify the job but not a specific instance of that job having run. The documentation all points to the VolumetoCatalog job verifying the last backup so suspect I'm grasping at straws but I was wondering if anyone knew anyway to specify a previous backup to verify. Any suggestions would be appreciated. Cheers, Troy. --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Sample Debian bacula-sd.conf for Autochanger?
Would someone running Debian be kind enough to send me the pertitent config elements for an Autochanger with 1.38.9 ? I've been unsuccessful thus far, and am sure it's something silly. (See "1.38.9-1 Autochanger statement causing 'Fatal Error'") Thanks in advance, Greg. --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid0709&bid&3057&dat1642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] backing up snapshots?
Here comes the "client run after failed job" lacking feature again. I'm backing up FreeBSD snapshots and there have been cases where the server runs out of disk space after a failed job because of the snapshot that was not deleted. So I've been thinking to create some pseudo-job that would run after all the jobs (just like the job backing up catalog) and delete possibly existing snapshots with "client run before job" script. On Monday 15 May 2006 19:44, Ryan Novosielski wrote: > I have not done it, but my assumption is that it's trivial. I have done > it manually with other backup software. I would ClientRunBeforeJob to > create the snapshot to a location, backup the location, and > ClientRunAfterJob to destroy it. > > _ _ _ _ ___ _ _ _ > |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - User Support Spec. III > |$&| |__| | | |__/ | \| _| |[EMAIL PROTECTED] - 973/972.0922 (2-0922) > \__/ Univ. of Med. and Dent.|IST/AST - NJMS Medical Science Bldg - C630 > > > Alan Brown wrote: > > > > Has anyone used LVM/EVMS snapshots to get a stable image to backup? > > > > If so, how do you do it? > > > > AB --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] DVD Writing problem
I just set dvd writing on a 64 bit amd64 box at work and I ran into the following error: 12-May 16:20 fileserver-sd: Remaining free space 2,172,223,488 on "DVD-WRITER" (/dev/dvd) 12-May 16:23 fileserver-dir: Distfiles-Job.2006-05-12_15.55.13 Error: sql_create.c:140 sql_create.c:140 update UPDATE Media SET EndFile=0, EndBlock=2999807958 WHERE MediaId=63 failed: ERROR: integer out of range 12-May 16:23 fileserver-dir: Distfiles-Job.2006-05-12_15.55.13 Fatal error: Catalog error creating JobMedia record. sql_create.c:142 Update Media record UPDATE Media SET EndFile=0, EndBlock=2999807958 WHERE MediaId=63 failed: ERR=ERROR: integer out of range 12-May 16:23 fileserver-sd: Distfiles-Job.2006-05-12_15.55.13 Fatal error: Error creating JobMedia record: 1991 Update JobMedia error 12-May 16:23 fileserver-sd: Distfiles-Job.2006-05-12_15.55.13 Fatal error: Could not create JobMedia record for Volume="DVD-0001" Job=Distfiles-Job.2006-05-12_15.55.13 12-May 16:25 fileserver-sd: Remaining free space 1,688,600,576 on "DVD-WRITER" (/dev/dvd) 12-May 16:25 fileserver-sd: Distfiles-Job.2006-05-12_15.55.13 Fatal error: append.c:207 Fatal append error on device "DVD-WRITER" (/dev/dvd): ERR=dvd.c:264 12-May 16:25 fileserver-fd: Distfiles-Job.2006-05-12_15.55.13 Fatal error: backup.c:500 Network send error to SD. ERR=Broken pipe 12-May 16:25 fileserver-dir: Distfiles-Job.2006-05-12_15.55.13 Error: Bacula 1.38.9 (02May06): 12-May-2006 16:25:43 JobId: 1424 Job:Distfiles-Job.2006-05-12_15.55.13 Backup Level: Full Client: "fileserver-fd" x86_64-pc-linux-gnu,gentoo,1.6.14 FileSet:"Distfiles" 2006-05-12 14:56:38 Pool: "DVD-Pool" Storage:"DVD-FILESERVER" Scheduled time: 12-May-2006 15:55:09 Start time: 12-May-2006 15:55:16 End time: 12-May-2006 16:25:43 Elapsed time: 30 mins 27 secs Priority: 10 FD Files Written: 7,584 SD Files Written: 7,584 FD Bytes Written: 2,996,692,410 (2.996 GB) SD Bytes Written: 2,997,365,237 (2.997 GB) Rate: 1640.2 KB/s Software Compression: None Volume name(s): DVD-0001 Volume Session Id: 1 Volume Session Time:1147463696 Last Volume Bytes: 2,999,807,960 (2.999 GB) Non-fatal FD errors:0 SD Errors: 0 FD termination status: Error SD termination status: Error Termination:*** Backup Error *** I am a little confused what the error is as there are two different errors. One error is a database problem that states "integer out of range" while the other is a network problem "Network send error to SD. ERR=Broken pipe" this is interesting because I have never had this error before on this box which I have backed up several TB of data... Any ideas? I checked and the SD is running and if I forgot to say this is on the same machine as the director and client in this case. Could this be caused by me using a nfs mount as the source instead of running the client on the remote machine. This was just a test so I did not want to bother with setting that up... Thanks in advance, John --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Problems with ADIC Autochanger
Hello!
I'm using Debian testing/unstable with bacula version 1.38.9.
The Autochanger is a ADIC FastStore 7 with a DLT-4000 device.
When I start bacula-sd with /etc/init.d/bacula-sd start I've get an Error.
server:/etc/bacula# /etc/init.d/bacula-sd start
Starting Bacula Storage daemon: 15-Mai 22:04 bacula-sd: Fatal Error
because: Bacula interrupted by signal 11: Segmentation violation
Kaboom! bacula-sd, bacula-sd got signal 11. Attempting traceback.
Kaboom! exepath=/usr/sbin/
Calling: /usr/sbin/btraceback /usr/sbin/bacula-sd 25680
Traceback complete, attempting cleanup ...
The debugging message:
(no debugging symbols found)
Using host libthread_db library "/lib/tls/libthread_db.so.1".
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
[Thread debugging using libthread_db enabled]
[New Thread -1213823296 (LWP 25680)]
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
0xb7e601fe in __waitpid_nocancel () from /lib/tls/libpthread.so.0
/etc/bacula/scripts/btraceback.gdb:1: Error in sourced command file:
No symbol table is loaded. Use the "file" command.
Not much :-(
This happens only when I configure the autochanger in the bacula-sd.conf
file.
Autochanger {
Name = ADIC #
Description = "ADIC VLS DLT400"
Device = AUTO-DLT
Changer Device = /dev/sg2
Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
}
Device {
Name = AUTO-DLT #
Description = "ADIC DLT4000"
Media Type = DLT-auto
Archive Device = /dev/nst0
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes;
LabelMedia = no;
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
Maximum Spool Size = 1895219200
Maximum Job Spool Size = 1695219200
Spool Directory = /var/spool/bacula
}
bacula-dir.conf :
Storage {
Name = ADIC
# Do not use "localhost" here
Address = server# N.B. Use a fully qualified name here
SDPort = 9103
Password = "" # password for
Storage daemon
Device = ADIC
Media Type = DLT-auto
Autochanger = yes
}
If I use Storage File everything is ok.
Thanks in advance for any help/tips
Marcus
---
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] bacula-gui beta release
Hello All, I've released bacula-gui-CVS20060514 to sourceforge to hopefully get some testing on a couple new features in the bimagemgr utility. Anyone using an SQLite catalog and backing up to volume files is encouraged to try it out. All the usual beta caveats apply, don't use it in production, don't put your first born at risk etc. But do send bug reports. Thanks. Regards, Scott --- bimagemgr Release Notes Release 0.3 Configuration information has been separated out of bimagemgr.pl into a new file config.pm. This file will not be overwritten by the installer when upgrading in the future. If you are upgrading from earlier releases you will need to transfer your configuration information out of bimagemgr.pl into the new config.pm file. Support for SQLite databases has been added. --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Version error for database "bacula". Wanted 8, got 9
Hi, Maik... On Sat, May 13, 2006 at 08:48:39PM +0200, Maik Derstappen wrote: > im upgrading my bacula from 1.36.2 to 1.38.9 on my debian machine. > But i have the following error: > > Version error for database "bacula". Wanted 8, got 9 > > The Database was new created befor. > > can anyone help me pleas? The Bacula package in Debian is currently undergoing a major remake. Due to the number of changes being done to the package the current versions may still be broken in some details. If you see more of these please use "reportbug bacula..." to inform us (the maintainers) about the problem. You didn't tell which database you use. But I can at least reproduce your problem with sqlite. A new package will probably be uploaded this weekend that fixes it. Until then you may want to use the upgrade scripts from /usr/share/bacula-director manually. Kindly Christoph --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] concurrent Backup for one job
Hello! I have a question concerning enabling concurrent backup for only one job: (a) I have several backup jobs backing up servers connected via a GBit LAN. These backups can go directly to tape, no spooling, one after the other. I don't want any concurrency between these backup jobs (b) I have one external server which I backup via a comparable slow connection. This backup is spooled to a local disk on the bacula machine. As the spooling of this backup is running very long, what I'd like to have is this job running and spooling to local disk concurrent with the others. I need to set "Maximum Concurrent Jobs = 2" on the director and the SD, I think, but I am not shure about the jobs: if I set both the (a) and (b) jobs to "Maximum Concurrent Jobs = 2", then, I think, the (a) jobs will run two at a time, too. On the other side, if I only set the (b) job to "Maximum Concurrent Jobs = 2", will it run concurrent with the (a) jobs, despite these are still set to "Maximum Concurrent Jobs = 1" ? Is there a way at all of having all local jobs (a) running individually and only the external spooled job (b) concurrent with the local (a) jobs? Thanks a lot! (Gerald) --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Storage Daemon ported to Windows
I've ported the Storage Daemon and related tools to Windows. Tested the tape with btape and all tests passed. WooHoo!! Next I need to get the Daemon running as a service and do some more backup / restore testing.
[Bacula-users] bacula-tray-monitor error for directory
Hello. On a newly installed bacula server (version 1.38.9), I've been having problems using the bacula-tray-monitor (version 1.38.9). It works great for monitoring the FD and the SD, but on the DIR, it always displays 'You must specify a "use " command before continuing.'. I'm stumped how to get meaningful data from the dir using it. Any help? -- ___ Search for businesses by name, location, or phone number. -Lycos Yellow Pages http://r.lycos.com/r/yp_emailfooter/http://yellowpages.lycos.com/default.asp?SRC=lycos10 --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid0709&bid&3057&dat1642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] TL891 Autochanger madness
Keith Hopkins (Bacula) wrote:
Hi list,
I have two Compaq(Digital) StorageWorks TL892 mini-libraries
(TL892=TL891 with 2x DLT7000 drives). When I run the autochanger test
in btape, it always hangs while waiting for a tape to load. The tape
gets loaded, it spends a while calibrating in the drive (about 45
seconds), then the drive goes 'IDLE' (per the mini-lib's LCD). btape
doesn't seem to recognize the tape is ready, and instead times out.
The test falls into a loop, extending the time out 30 sec each time,
but it fails in the same spot (open/rewind) again and again. This
happens on both libs/all 4 drives. Any clues on how to work around this?
I'm using the bacula-mysql-1.38.9-1 rpm for SuSE10 dl from
sourceforge. The machine is a AMD K7 1.4G, 1.5G SDRAM, IDE. The
drives libs/drives are attached via two Adaptec 2944UW cards. Kernel
is 2.6.13-15.8-default from SuSE. The only unusual thing from dmesg
is "MTSETDRVBUFFER only allowed for root."
# btape -d 4 -c ./bacula-sd.conf DLT01 -v
(tape test runs without error)
=== Autochanger test ===
3301 Issuing autochanger "loaded" command.
Slot 2 loaded. I am going to unload it.
3302 Issuing autochanger "unload 2 1" command.
unload status=OK 0
3303 Issuing autochanger "load 1 1" command.
3303 Autochanger "load 1 1" status is OK.
08-May 19:12 btape: 3301 Issuing autochanger "loaded drive 1" command.
08-May 19:12 btape: 3302 Autochanger "loaded drive 1", result is Slot 1.
btape: btape.c:338 open device "DLT01" (/dev/nst1): OK
08-May 19:12 btape: 3301 Issuing autochanger "loaded drive 1" command.
08-May 19:12 btape: 3302 Autochanger "loaded drive 1", result is Slot 1.
btape: btape.c:1198 Bad status from rewind. ERR=dev.c:678 Rewind error
on "DLT01" (/dev/nst1). ERR=Input/output error.
While it is waiting with the drive in the idle state:
# lsof /dev/nst1
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
btape 6039 root3u CHR 9,129 15362 /dev/nst1
# mtst -f /dev/nst1
/dev/nst1: Device or resource busy
/etc/bacula/bacula-sd.conf
Autochanger {
Name = TL891Left
Device = DLT00
Device = DLT01
Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg0
}
Autochanger {
Name = TL891Right
Device = DLT02,DLT03
Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg3
}
Device {
Name = DLT00
Archive Device = /dev/nst0
Device Type = Tape
Media Type = DLT7000
AutoChanger = Yes
Drive Index = 0
AutoSelect = Yes
Maximum Changer Wait = 180
Maximum Rewind Wait = 180
Maximum Open Wait = 180
AlwaysOpen = Yes
Maximum Open Wait = 180
Removable media = Yes
Random access = No
Automatic Mount = Yes
}
Device {
Name = DLT01
Archive Device = /dev/nst1
Device Type = Tape
Media Type = DLT7000
AutoChanger = Yes
Drive Index = 1
AutoSelect = Yes
Maximum Changer Wait = 180
Maximum Rewind Wait = 180
Maximum Open Wait = 180
AlwaysOpen = Yes
Maximum Open Wait = 180
Removable media = Yes
Random access = No
Automatic Mount = Yes
}
Device {
Name = DLT02
Archive Device = /dev/nst2
Device Type = Tape
Media Type = DLT7000
AutoChanger = Yes
Drive Index = 0
AutoSelect = Yes
Maximum Changer Wait = 180
Maximum Rewind Wait = 180
Maximum Open Wait = 180
AlwaysOpen = Yes
Maximum Open Wait = 180
Removable media = Yes
Random access = No
Automatic Mount = Yes
}
Device {
Name = DLT03
Archive Device = /dev/nst3
Device Type = Tape
Media Type = DLT7000
AutoChanger = Yes
Drive Index = 1
AutoSelect = Yes
Maximum Changer Wait = 180
Maximum Rewind Wait = 180
Maximum Open Wait = 180
AlwaysOpen = Yes
Maximum Open Wait = 180
Removable media = Yes
Random access = No
Automatic Mount = Yes
}
I do see where someone has the TL891 working under FreeBSD
(http://www.freebsddiary.org/digital-tl891.php)
--
Keith
For what it's worth, the drive status during calibration is:
# mtst -f /dev/nst0 status
SCSI 2 tape drive:
File number=-1, block number=-1, partition=0.
Tape block size 0 bytes. Density code 0x0 (default).
Soft error count since last status=0
General status bits on (1):
IM_REP_EN
and after it does to an idle state, it is:
# mtst -f /dev/nst0 status
SCSI 2 tape drive:
File number=0, block number=0, partition=0.
Tape block size 0 bytes. Density code 0x1b (DLT 35GB).
Soft error count since last status=0
General status bits on (4101):
BOT ONLINE IM_REP_EN
--Keith
---
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] virus in winbacula-1.38.9.exe?
I downloaded winbacula-1.38.9.exe and tried to install it under Win98se. There is a AntiVir (searchengine: 7.00.00.08; virusdef: 6.34.01.44 5.5.06) installed. It told me that C:\BACULA\BIN\BACULA-FD.EXE has suspiciously code: HEURISTIC/Backdoor.Generic What is about that? --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Re: Examples on the website
> I have been using bacula for a year now, before setting up a small > config I started by reading the whole manual. Now I know where to look > for what when i need to. I think if we post our configs, it no doubt > So did I, read the whole manual, maybe a couple of years ago. I think 1.36 was the first release I seriously started to use, although there were some test runs before that. Number of pages in the documentation has increased a lot during that period of time. I'm not certain I would any more know where to look for information on some new features -without very much of browsing. I tried to re-read the manual maybe a year ago, but it was very frustrating: "I think I know this, no need to re-read". Oops, now I skipped 50 pages -wonder if there were something important new for me? Yes, there certainly was... The Bacula manual is very through and detailed, but it is a more like reference manual where you can check (or point it out to someone) what you already know, although it is mixed with examples etc. I sometimes have been thinking, that it might be worth splitting into two manuals: a detailed and precise reference manual, and introducory how to build / how to install & test run / how to configure your first (rather basic) backup system. The latter one might be enough to cover the latest version, the reference should also contain easy-to-see information since what release the feature in question has been available. And well indexed, too. > will help people find it easier to setup bacula but in the end we are > going to face more questions "I followed such-n-such config but it > doesn't work" and the infamous RTFM reply. > I agree. I think that kind of examples should be similar to ones currently in the manual: Verified and commented by someone skilled enough. Otherwise there exists the danger that "wild examples" guide to using some unwanted side effects, or features that are planned to be obsoleted in the releases to come. -- TiN --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Version error for database "bacula". Wanted 8, got 9
[my reply to this posting seems to be still in the moderator queue - repost] On Sat, May 13, 2006 at 08:48:39PM +0200, Maik Derstappen wrote: > im upgrading my bacula from 1.36.2 to 1.38.9 on my debian machine. > But i have the following error: > > Version error for database "bacula". Wanted 8, got 9 Unfortunately the migration scripts weren't properly in place yet. The Debian package for 1.38.9 is currently undergoing a major reworking by John Goerzen and me. The newer version 1.38.9-8 in incoming.debian.org should have this issue fixed already. To update your database please just run the update script in /usr/share/bacula-director Kindly Christoph --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Version error for database "bacula". Wanted 8, got 9
Maik Derstappen wrote: hello, im upgrading my bacula from 1.36.2 to 1.38.9 on my debian machine. But i have the following error: Version error for database "bacula". Wanted 8, got 9 The Database was new created befor. can anyone help me pleas? cu maik You probably need to update your database with update_bacula_tables There is a section in the manual concerning upgrading bacula versions. http://www.bacula.org/rel-manual/index.html -- Robert --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Fw: Problem with Python-Script "DirStartUp.py": Can't import "time"-module: Bacula disables python interpreter.
Dear users, as the subject says, bacula disables the python interpreter if I try to import the time - module (which I need). Has anyone any idea or experience with this? Thanks a lot! Best Regards, i. A. Christoff Buch = [EMAIL PROTECTED] OneVision Software AG Dr.-Leo-Ritter-Str. 9 93049 Regensburg
