[Bacula-users] Pending jobs sequence skipped.
Hi, Due to holiday and having no one around to switch tapes for me, I have more than 10 jobs created and pending for backup. Normally when situation like this occur (though with lesser number of jobs), I will just put in the tapes one by one and let the jobs run in sequence one after another. This time I found that 2 jobs (Saturday and Sunday) were marked as 'fatal error'. Monday job should be next in sequence, but job Friday is listed instead of Monday. I canceled the Friday job, but then a newer job that is way down in the job list got to run first. How does this happen? Check out the jobid - 138, 139, 149, 151. jobid 140 got skipped. | 137 | W2W4 | 2014-07-25 13:00:03 | B| F | 38,805 | 6,073,467,421 | T | | 138 | SatSunW2 | 2014-07-26 13:00:03 | B| I |0 | 0 | f | | 139 | SatSunW2 | 2014-07-31 20:00:20 | B| F |0 | 0 | f | | 149 | FriW1| 2014-08-06 03:00:33 | B| F |0 | 0 | A | | 151 | SatSunW2 | 2014-08-07 10:54:28 | B| F |0 | 0 | R | | 140 | MonTueW1 | | B| I |0 | 0 | C | | 141 | MonTueW1 | | B| I |0 | 0 | C | | 142 | WedThuW1 | | B| I |0 | 0 | C | | 143 | WedThuW1 | | B| I |0 | 0 | C | | 144 | FriW1 | | B| F |0 | 0 | C | | 145 | SatSunW1 | | B| I |0 | 0 | C | | 146 | SatSunW1 | | B| I |0 | 0 | C | | 147 | MonTueW2 | | B| I |0 | 0 | C | | 148 | MonTueW2 | | B| I |0 | 0 | C | | 150 | WedThuW2 | | B| I |0 | 0 | C | | 152 | MonTueW1 | | B| I |0 | 0 | C | | 153 | MonTueW1 | | B| I |0 | 0 | C | +---+--+-+--+---+--+---+---+ -- -- Infragistics Professional Build stunning WinForms apps today! Reboot your WinForms applications with our WinForms controls. Build a bridge from your legacy apps to the future. http://pubads.g.doubleclick.net/gampad/clk?id=153845071iu=/4140/ostg.clktrk___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Director not running
Hello I need some help again... I've tried to run bconsole but no success. After doing some research I realize the director wasn't running... All passwords and names were checked, I also reinstalled bacula from BSD ports, there isn't any firewall running... Any help would be very appreciated... =) Best regards!! Here are some outputs: # bconsole Connecting to Director 192.168.0.10:9101 Director authorization problem. Most likely the passwords do not agree. If you are using TLS, there may have been a certificate validation error during the TLS handshake. Please see http://www.bacula.org/en/rel-manual/Bacula_Freque_Asked_Questi.html#SECTION00376 for help. # bacula restart Stopping the Bacula File daemon Stopping the Bacula Storage daemon Stopping the Bacula Director daemon Starting the Bacula Storage daemon Starting the Bacula File daemon Starting the Bacula Director daemon # ps aux | grep bacula bacula 1423 0.0 0.2 56132 6816 - Is 10:49AM 0:00.00 /usr/local/sbin/bacula-sd -u bacula -g operator -v -c /usr/local/et root 1430 0.0 0.2 56028 6432 - Is 10:49AM 0:00.00 /usr/local/sbin/bacula-fd -v -c /usr/local/etc/bacula/bacula-fd.con root 1559 0.0 0.1 18724 2156 0 S+ 10:55AM 0:00.00 grep bacula # bacula-dir -f -v -d 200 -c bacula-dir.conf bacula-dir: dird.c:198-0 Debug level = 200 bacula-dir: inc_conf.c:556-0 set wildbase 803c521e8 size=1 *.tmp bacula-dir: inc_conf.c:556-0 set wildbase 803c52568 size=1 *.tmp bacula-dir: inc_conf.c:556-0 set wildbase 803c52728 size=1 *.tmp bacula-dir: inc_conf.c:556-0 set wildbase 803c528e8 size=1 *.tmp bacula-dir: runscript.c:296-0 runscript: debug bacula-dir: runscript.c:297-0 -- RunScript bacula-dir: runscript.c:298-0 -- Command=/usr/local/share/bacula/make_catalog_backup.pl Catalogo bacula-dir: runscript.c:299-0 -- Target= bacula-dir: runscript.c:300-0 -- RunOnSuccess=1 bacula-dir: runscript.c:301-0 -- RunOnFailure=0 bacula-dir: runscript.c:302-0 -- FailJobOnError=1 bacula-dir: runscript.c:303-0 -- RunWhen=2 bacula-dir: runscript.c:296-0 runscript: debug bacula-dir: runscript.c:297-0 -- RunScript bacula-dir: runscript.c:298-0 -- Command=/usr/local/share/bacula/delete_catalog_backup bacula-dir: runscript.c:299-0 -- Target= bacula-dir: runscript.c:300-0 -- RunOnSuccess=1 bacula-dir: runscript.c:301-0 -- RunOnFailure=0 bacula-dir: runscript.c:302-0 -- FailJobOnError=1 bacula-dir: runscript.c:303-0 -- RunWhen=1 bacula-dir: jcr.c:140-0 read_last_jobs seek to 192 bacula-dir: jcr.c:147-0 Read num_items=0 bacula-dir: dir_plugins.c:160-0 Load dir plugins bacula-dir: dir_plugins.c:162-0 No dir plugin dir! bacula-dir: postgresql.c:1126-0 db_init_database first time bacula-dir: postgresql.c:241-0 pg_real_connect done bacula-dir: postgresql.c:243-0 db_user=bacula db_name=bacula db_password=** bacula-dir: sql_create.c:357-0 In create mediatype bacula-dir: sql_create.c:361-0 selectmediatype: SELECT MediaTypeId,MediaType FROM MediaType WHERE MediaType='File' bacula-dir: dird.c:339-0 Start UA server bacula-dir: job.c:1334-0 wstorage=bacula-sd bacula-dir: job.c:1343-0 wstore=bacula-sd where=Job resource bacula-dir: bnet_server.c:112-0 Addresses host[ipv4:192.168.0.10:9101] bacula-dir: job.c:1034-0 JobId=0 created Job=*JobMonitor*.2014-08-07_10.51.23_01 bacula-dir: dird.c:352-0 wait for next job bacula-dir: scheduler.c:104-0 Enter wait_for_next_job bacula-dir: scheduler.c:273-0 enter find_runs() bacula-dir: scheduler.c:286-0 now = 53e3845b: h=10 m=7 md=6 wd=4 wom=0 woy=32 bacula-dir: scheduler.c:303-0 nh = 53e3926b: h=11 m=7 md=6 wd=4 wom=0 woy=32 bacula-dir: scheduler.c:312-0 Got job: SrvBaculaBackup bacula-dir: scheduler.c:355-0 run@803c1cb68: run_now=0 run_nh=0 bacula-dir: scheduler.c:355-0 run@803c1cc28: run_now=0 run_nh=0 bacula-dir: scheduler.c:312-0 Got job: CatalogBackup bacula-dir: scheduler.c:355-0 run@803c1ce68: run_now=0 run_nh=0 bacula-dir: scheduler.c:312-0 Got job: SrvLdapBackup bacula-dir: scheduler.c:355-0 run@803c1cb68: run_now=0 run_nh=0 bacula-dir: scheduler.c:355-0 run@803c1cc28: run_now=0 run_nh=0 bacula-dir: scheduler.c:312-0 Got job: SrvWebBackup bacula-dir: scheduler.c:355-0 run@803c1cb68: run_now=0 run_nh=0 bacula-dir: scheduler.c:355-0 run@803c1cc28: run_now=0 run_nh=0 bacula-dir: scheduler.c:312-0 Got job: SrvDnsBackup bacula-dir: scheduler.c:355-0 run@803c1cb68: run_now=0 run_nh=0 bacula-dir: scheduler.c:355-0 run@803c1cc28: run_now=0 run_nh=0 bacula-dir: scheduler.c:374-0 Leave find_runs() bacula-dir: scheduler.c:273-0 enter find_runs() bacula-dir: scheduler.c:286-0 now = 53e38497: h=10 m=7 md=6 wd=4 wom=0 woy=32 bacula-dir: scheduler.c:303-0 nh = 53e392a7: h=11 m=7 md=6 wd=4 wom=0 woy=32 bacula-dir: scheduler.c:312-0 Got job: SrvBaculaBackup bacula-dir: scheduler.c:355-0 run@803c1cb68: run_now=0 run_nh=0 bacula-dir: scheduler.c:355-0 run@803c1cc28: run_now=0 run_nh=0 bacula-dir: scheduler.c:312-0 Got job: CatalogBackup bacula-dir: scheduler.c:355-0
[Bacula-users] Bacula Loading Tape at the Wrong Library
Hello everybody,
I'm new to Bacula, and i'm having a problem using different storages in a
same pool.
I have two HP Tape Libraries installed on the Storage (LibHP08 and
LibHP09), i tried to configure some jobs to access both libraries, but I'm
having some trouble with bacula accessing the wrong library.
For example, bacula tries to access volume G00022L5 on slot 20 at
LibHP08, but it reaches the volume H00011L5 on slot 20 at LibHP09.
Basically, it tries to get a tape on the correct slot, but in the wrong
Library. It Generates the Following error:
LibHP 3307 Issuing autochanger unload slot 20, drive 1 command.
Warning: Director wanted Volume G00022L5.
Current Volume H00011L5 not acceptable because:
1998 Volume H00011L5 catalog status is Append, not in Pool.
Then, bacula unloads the drive, tries to find the correct tape, but loads
the wrong one, generates the error again, and so on.
The job never completes, since it doesn't find the correct tape.
Some of my Pools:
Pool {
Name = machine-Pool-Weekly
Pool Type = Backup
Storage = LibHP08, LibHP09
Recycle = yes
AutoPrune = yes
Volume Retention = 34 days
}
Pool {
Name = machine-Pool-Monthly
Pool Type = Backup
Storage = LibHP08, LibHP09
Recycle = yes
AutoPrune = yes
Volume Retention = 1825 days
}
Devices/Autochangers Config:
#
## An autochanger device with four drives
## Library HP (LibHP08)
##
Autochanger {
Name = LibHP08_Changer
Device = LibHP08-drive_1, LibHP08-drive_2, LibHP08-drive_3, LibHP08-drive_4
Changer Command = /usr/lib64/bacula/mtx-changer %c %o %S %a %d
Changer Device = /dev/tape/by-id/scsi-35001438016063c04
}
#
## An autochanger device with four drives
## Library HP (LibHP09)
##
Autochanger {
Name = LibHP09_Changer
Device = LibHP09-drive_1, LibHP09-drive_2, LibHP09-drive_3, LibHP09-drive_4
Changer Command = /usr/lib64/bacula/mtx-changer %c %o %S %a %d
Changer Device = /dev/tape/by-id/scsi-3500143801606395c
}
Device {
Name = LibHP08-drive_1 #
Drive Index = 0
Media Type = LTO-5
Archive Device = /dev/tape/by-id/scsi-35001438016063c05-nst
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
Alert Command = sh -c 'smartctl -H -l error %c'
Maximum Changer Wait = 600
Maximum Concurrent Jobs = 1
LabelMedia = yes
}
Device {
Name = LibHP08-drive_2 #
Drive Index = 1
Media Type = LTO-5
Archive Device = /dev/tape/by-id/scsi-35001438016063c08-nst
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
Alert Command = sh -c 'smartctl -H -l error %c'
Maximum Changer Wait = 600
Maximum Concurrent Jobs = 1
LabelMedia = yes
}
Device {
Name = LibHP08-drive_3 #
Drive Index = 2
Media Type = LTO-5
Archive Device = /dev/tape/by-id/scsi-35001438016063c0b-nst
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
Alert Command = sh -c 'smartctl -H -l error %c'
Maximum Changer Wait = 600
Maximum Concurrent Jobs = 1
LabelMedia = yes
}
Device {
Name = LibHP08-drive_4 #
Drive Index = 3
Media Type = LTO-5
Archive Device = /dev/tape/by-id/scsi-35001438016063c0e-nst
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
Alert Command = sh -c 'smartctl -H -l error %c'
Maximum Changer Wait = 600
Maximum Concurrent Jobs = 1
LabelMedia = yes
}
Device {
Name = LibHP09-drive_1 #
Drive Index = 0
Media Type = LTO-5
Archive Device = /dev/tape/by-id/scsi-3500143801606395d-nst
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
Alert Command = sh -c 'smartctl -H -l error %c'
Maximum Changer Wait = 600
Maximum Concurrent Jobs = 1
LabelMedia = yes
}
Device {
Name = LibHP09-drive_2 #
Drive Index = 1
Media Type = LTO-5
Archive Device = /dev/tape/by-id/scsi-35001438016063960-nst
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
Alert Command = sh -c 'smartctl -H -l error %c'
Maximum Changer Wait = 600
Maximum Concurrent Jobs = 1
LabelMedia = yes
}
Device {
Name = LibHP09-drive_3 #
Drive Index = 2
Media Type = LTO-5
Archive Device = /dev/tape/by-id/scsi-35001438016063963-nst
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
Alert Command = sh -c 'smartctl -H -l error %c'
Maximum Changer Wait
Re: [Bacula-users] Bacula Loading Tape at the Wrong Library
Hi Vinicius,
You need to use a unique Media Type for each autochanger, e.g. “LTO5-Library1”
and “LTO5-Library2”. These are arbitrary string values, the exact name doesn’t
matter. Bacula believes a drive in library1 is suitable for loading a tape from
library2 because the same Media Type is used for each.
Regards,
Ben Roberts
From: Vinicius Alexandre Pereira de Souza [mailto:vinicius.apso...@gmail.com]
Sent: 07 August 2014 17:39
To: bacula-users@lists.sourceforge.net
Subject: [Bacula-users] Bacula Loading Tape at the Wrong Library
Hello everybody,
I'm new to Bacula, and i'm having a problem using different storages in a same
pool.
I have two HP Tape Libraries installed on the Storage (LibHP08 and LibHP09), i
tried to configure some jobs to access both libraries, but I'm having some
trouble with bacula accessing the wrong library.
For example, bacula tries to access volume G00022L5 on slot 20 at LibHP08,
but it reaches the volume H00011L5 on slot 20 at LibHP09. Basically, it tries
to get a tape on the correct slot, but in the wrong Library. It Generates the
Following error:
LibHP 3307 Issuing autochanger unload slot 20, drive 1 command.
Warning: Director wanted Volume G00022L5.
Current Volume H00011L5 not acceptable because:
1998 Volume H00011L5 catalog status is Append, not in Pool.
Then, bacula unloads the drive, tries to find the correct tape, but loads the
wrong one, generates the error again, and so on.
The job never completes, since it doesn't find the correct tape.
Some of my Pools:
Pool {
Name = machine-Pool-Weekly
Pool Type = Backup
Storage = LibHP08, LibHP09
Recycle = yes
AutoPrune = yes
Volume Retention = 34 days
}
Pool {
Name = machine-Pool-Monthly
Pool Type = Backup
Storage = LibHP08, LibHP09
Recycle = yes
AutoPrune = yes
Volume Retention = 1825 days
}
Devices/Autochangers Config:
#
## An autochanger device with four drives
## Library HP (LibHP08)
##
Autochanger {
Name = LibHP08_Changer
Device = LibHP08-drive_1, LibHP08-drive_2, LibHP08-drive_3, LibHP08-drive_4
Changer Command = /usr/lib64/bacula/mtx-changer %c %o %S %a %d
Changer Device = /dev/tape/by-id/scsi-35001438016063c04
}
#
## An autochanger device with four drives
## Library HP (LibHP09)
##
Autochanger {
Name = LibHP09_Changer
Device = LibHP09-drive_1, LibHP09-drive_2, LibHP09-drive_3, LibHP09-drive_4
Changer Command = /usr/lib64/bacula/mtx-changer %c %o %S %a %d
Changer Device = /dev/tape/by-id/scsi-3500143801606395c
}
Device {
Name = LibHP08-drive_1 #
Drive Index = 0
Media Type = LTO-5
Archive Device = /dev/tape/by-id/scsi-35001438016063c05-nst
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
Alert Command = sh -c 'smartctl -H -l error %c'
Maximum Changer Wait = 600
Maximum Concurrent Jobs = 1
LabelMedia = yes
}
Device {
Name = LibHP08-drive_2 #
Drive Index = 1
Media Type = LTO-5
Archive Device = /dev/tape/by-id/scsi-35001438016063c08-nst
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
Alert Command = sh -c 'smartctl -H -l error %c'
Maximum Changer Wait = 600
Maximum Concurrent Jobs = 1
LabelMedia = yes
}
Device {
Name = LibHP08-drive_3 #
Drive Index = 2
Media Type = LTO-5
Archive Device = /dev/tape/by-id/scsi-35001438016063c0b-nst
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
Alert Command = sh -c 'smartctl -H -l error %c'
Maximum Changer Wait = 600
Maximum Concurrent Jobs = 1
LabelMedia = yes
}
Device {
Name = LibHP08-drive_4 #
Drive Index = 3
Media Type = LTO-5
Archive Device = /dev/tape/by-id/scsi-35001438016063c0e-nst
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
Alert Command = sh -c 'smartctl -H -l error %c'
Maximum Changer Wait = 600
Maximum Concurrent Jobs = 1
LabelMedia = yes
}
Device {
Name = LibHP09-drive_1 #
Drive Index = 0
Media Type = LTO-5
Archive Device = /dev/tape/by-id/scsi-3500143801606395d-nst
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
Alert Command = sh -c 'smartctl -H -l error %c'
Maximum Changer Wait = 600
Maximum Concurrent Jobs = 1
LabelMedia = yes
}
Device {
Name = LibHP09-drive_2 #
Drive Index = 1
Media Type = LTO-5
Archive Device =
[Bacula-users] Good web interface??
I was using Webacula on an older installation and am now trying to get it working on 7.0.5 While I can log in, and it displays existing data correctly, when I try to do anything with jobs, I get the following errors: [07-Aug-2014 14:16:44] PHP Notice: Trying to get property of non-object in /usr/share/webacula/application/layouts/default/header.phtml on line 25 [07-Aug-2014 14:16:44] PHP Notice: Trying to get property of non-object in /usr/share/webacula/application/layouts/default/header.phtml on line 25 [07-Aug-2014 14:16:44] PHP Notice: Trying to get property of non-object in /usr/share/webacula/application/layouts/default/header.phtml on line 28 [07-Aug-2014 14:16:44] PHP Notice: Trying to get property of non-object in /usr/share/webacula/application/layouts/default/header.phtml on line 28 [07-Aug-2014 14:16:44] PHP Notice: Trying to get property of non-object in /usr/share/webacula/application/layouts/default/header.phtml on line 29 [07-Aug-2014 14:16:44] PHP Notice: Trying to get property of non-object in /usr/share/webacula/application/layouts/default/header.phtml on line 29 [07-Aug-2014 14:16:44] PHP Notice: Trying to get property of non-object in /usr/share/webacula/application/layouts/default/header.phtml on line 30 [07-Aug-2014 14:16:44] PHP Notice: Trying to get property of non-object in /usr/share/webacula/application/layouts/default/header.phtml on line 30 [07-Aug-2014 14:16:44] PHP Notice: Trying to get property of non-object in /usr/share/webacula/application/layouts/default/header.phtml on line 31 [07-Aug-2014 14:16:44] PHP Notice: Trying to get property of non-object in /usr/share/webacula/application/layouts/default/header.phtml on line 31 [07-Aug-2014 14:16:44] PHP Notice: Trying to get property of non-object in /usr/share/webacula/application/layouts/default/header.phtml on line 38 [07-Aug-2014 14:16:44] PHP Notice: Trying to get property of non-object in /usr/share/webacula/application/layouts/default/header.phtml on line 38 [07-Aug-2014 14:16:44] PHP Notice: Trying to get property of non-object in /usr/share/webacula/application/layouts/default/header.phtml on line 39 [07-Aug-2014 14:16:44] PHP Notice: Trying to get property of non-object in /usr/share/webacula/application/layouts/default/header.phtml on line 39 [07-Aug-2014 14:16:44] PHP Notice: Trying to get property of non-object in /usr/share/webacula/application/layouts/default/header.phtml on line 44 [07-Aug-2014 14:16:44] PHP Notice: Trying to get property of non-object in /usr/share/webacula/application/layouts/default/header.phtml on line 44 [07-Aug-2014 14:16:44] PHP Notice: Trying to get property of non-object in /usr/share/webacula/application/layouts/default/main-menu.phtml on line 21 [07-Aug-2014 14:16:44] PHP Fatal error: Call to a member function isAllowed() on a non-object in /usr/share/webacula/application/layouts/default/main-menu.phtml on line 25 [07-Aug-2014 14:16:44] PHP Fatal error: Class 'Zend_Auth' not found in /usr/share/webacula/library/MyClass/Session/SaveHandler/DbTable.php on line 46 This is Webacula 5.5.1, on a CentOS 6.5 system, Bacula 7.0.5 and the database is Postgres 8.4 I am very open to using a different web interface, and would be interested in any recommendations. Of course, if you know how to fix this problem, that would be great as well. Thank in advance Jonathan Bayer -- Infragistics Professional Build stunning WinForms apps today! Reboot your WinForms applications with our WinForms controls. Build a bridge from your legacy apps to the future. http://pubads.g.doubleclick.net/gampad/clk?id=153845071iu=/4140/ostg.clktrk___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] List files associated with destroyed tape
Hi Martin, I tried this after backing up the catalog. It worked in the sense that it purged the files from the destroyed media but it also purged all the rest of the files in the job... 8. Re: List files associated with destroyed tape (Martin Simmons) -- John Wallach Systems Administrator PGP Fingerprint: C089 65CA 1F30 8A02 86C5 6BC3 59E1 ACE4 F8B4 28DB Democracy Now! www.democracynow.org -- Infragistics Professional Build stunning WinForms apps today! Reboot your WinForms applications with our WinForms controls. Build a bridge from your legacy apps to the future. http://pubads.g.doubleclick.net/gampad/clk?id=153845071iu=/4140/ostg.clktrk ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] HEADS UP: FreeBSD port changes coming
On Jun 24, 2014, at 9:28 AM, Dan Langille d...@langille.org wrote: The FreeBSD port is about to change. I started work on a 7.x port back in March (http://comments.gmane.org/gmane.comp.sysutils.backup.bacula.devel/17729) but my time was taken over by BSDCan and PGCon. Andrey K has submitted a patch (https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=191311) and we plan to move quickly with this. The existing ports will be copied within the FreeBSD ports tree before the above patch is committed. Thus, sysutils/bacula-server will be copied to sysutils/bacula5-server. Also created will be bacula7-client, bacula5-docs, bacula5-bat, etc. FYI: Installing Bacula 5 and Bacula 7 on the same system will result in a conflict and the ports will be structure to not allow you to do that. For those that need to keep using Bacula 5, you can. Those on Bacula 7, the upgrade should be coming soon. Done. Bacula 7.0.4: http://www.freshports.org/commit.php?category=sysutilsport=bacula-serverfiles=yesmessage_id=53e3d25b.2da7.4e03a...@svn.freebsd.org And Bacula 5: http://www.freshports.org/commit.php?message_id=53e3d1ca.2d1d.3b112...@svn.freebsd.orgfiles=ye — Dan Langille signature.asc Description: Message signed with OpenPGP using GPGMail -- Infragistics Professional Build stunning WinForms apps today! Reboot your WinForms applications with our WinForms controls. Build a bridge from your legacy apps to the future. http://pubads.g.doubleclick.net/gampad/clk?id=153845071iu=/4140/ostg.clktrk___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Error when trying to configure bacula-gui-7.0.5
Hello, Yes, Baculum is only web application. It was designed to work in web server document root directory. I noticed on this mailing list that you are not only one person for which document root requirement makes problem. I tried to do something with this issue. I prepared changes that detect if Baculum files are placed in subdirectory. If yes, then for each HTTP request is added this subdirectory name (or subdirectories names) as prefix. This change will be available in next release. Best regards. Marcin 2014-08-05 14:34 GMT+02:00 Machiel mach...@integrat.co.za: Hi, Thank you for the reply. ok, two questions here. - I have only copied the baculum directory from the bacula-gui-7.0.5 source directory and to the /var/www/html/baculum directory. -- first question, am I supposed to copy the full bacula-gui directory or was this correct. - my current virtualhost config is as follows: VirtualHost *:80 DocumentRoot /var/www/html/baculum/ serveralias # hashed out info ServerName # hashed out info Directory /var/www/html/baculum RewriteEngine On AllowOverride All AuthType Basic AuthName MyPrivateFile AuthUserFile /var/www/html/baculum/passwords Require valid-user /Directory /VirtualHost This is the only site that will be running on the server so I have placed this virtualhost in the default file. If I need to put a rewrite rule in, then my second question is what would it look like as I dont know how to write rewrite_rules at all. Regards On 05/08/2014 14:20, Marcin Haba wrote: Hello, It looks that your DocumentRoot option from VirtualHost does not indicate to directory with Baculum files. The most probably is that you used subdirectory for storing Baculum files. For example, if you are storing Baculum files in location: /some/dir/bacula-gui/baculum then according Apache configuration file part can look like below: VirtualHost *:80 DocumentRoot /some/dir/bacula-gui/baculum ServerName somehost.example.com Directory /some/dir/bacula-gui/baculum AllowOverride All AuthType Basic AuthName MyPrivateFile AuthUserFile /etc/apache2/some_password_file Require valid-user /Directory /VirtualHost In other words, Baculum files need to be located on top location of your web server document root. From this reason access to Baculum is by: http://yourhost/ but NOT by: http://yourhost/baculum/ I believe that this problem is easy to skip by modifing mod_rewrite rules. Best regards. Marcin 2014-08-05 10:30 GMT+02:00 Machiel mach...@integrat.co.za: Hi Guys Thank you for the response on this matter. I have now followed the instructions for installing baculum as per the INSTALL file, however now I a getting the following when I go to the web interface: The requested URL /wizard/ was not found on this server. I have done some web searches and everyone is noting that the authorisation needs to be configured and that mod_rewrite needs to be enabled. Both these have been done, however still getting that message. Any ideas on what might be wrong or how to fix this? I am by no means an apache or php expert. Regards On 31/07/2014 17:52, Marcin Haba wrote: 2014-07-31 15:05 GMT+02:00 Machiel mach...@integrat.co.za mach...@integrat.co.za: Hi Guys I have installed bacula7.0.5 from source as well as bacula-web today without any issues. I am however trying to install bacula-gui-7.0.5 , but when I run the configure script I get the following: ./configure --with-bacula=/installs/bacula-7.0.5/ configuring for Bacula source 7.0.5 01Jan13 29Feb12 4.8.4 (28 July 2014) checking for true... /bin/true checking for false... /bin/false checking for gawk... gawk checking for gawk... /usr/bin/gawk checking for a BSD-compatible install... /usr/bin/install -c checking for mv... /bin/mv checking for rm... /bin/rm checking for cp... /bin/cp checking for echo... /bin/echo checking for ar... /usr/bin/ar checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking for Operating System Distribution... done configure: creating ./config.status config.status: creating autoconf/Make.common sed: file ./confstatvUTcN2/subs-1.sed line 35: unterminated `s' command config.status: creating Makefile sed: file ./confstatvUTcN2/subs-1.sed line 35: unterminated `s' command config.status: creating bimagemgr/Makefile config.status: error: cannot find input file: bimagemgr/Makefile.in I tried the same on another machine running 7.0.4 and got the exact same thing.
Re: [Bacula-users] Good web interface??
This is Webacula 5.5.1, on a CentOS 6.5 system, Bacula 7.0.5 and the database is Postgres 8.4 Although I don't ever use Webacula, bconsole is so much easier for me, I do have the exact same setup on one system and it works fine. You likely have some local issue that could be resolved if you are preferential to Webacula. jlc -- Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Good web interface??
I’m using Webacula 5.5.1 with Bacula 7.0.4 on CentOS 6.5 without any problem, so I think it must be an issue on your local installation. Try to increase the log level in php.ini and log to a file to get a hint what the problem could be. Maybe a permission issue from your web process user to execute bconsole. Best, Rob -- Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
