A copy job will communicate using TCP between the Bacula daemons. A bsock
error could indicate that bacula-sd closed the connection unexpectedly and I
would expect media errors to be logged.
Your syslog did include some I/O errors. Any they caused by something else?
Do you have the complete job log (from the Bacula log, not the syslog)?
__Martin
> On Wed, 13 Sep 2017 09:35:07 -0700, Jerry Lowry said:
>
> Kern,
> My Offsite Backup just failed again on the same drive, different disk. It
> failed with the same bsock error. If the backup is working on the same
> system using the copy function, how far out of the network stack does it
> go. My thinking is it does not get out of the application layer. Is this
> right? Why would I get a bsock error?
>
> I have taken a look at the smart data for the disk and they seem to be
> running okay. I am getting some sector relocation errors, would that cause
> the bsock error during a remap? This procedure has been running flawlessly
> for many years ( except for human error ). I am wondering if I should
> delete the present disk files and let bacula recreate new ones.
>
> thanks for your help!
>
> jerry
>
>
> On Wed, Sep 6, 2017 at 11:26 PM, Kern Sibbald wrote:
>
> > Hello,
> >
> > If the job is marked as Incomplete in the catalog ("I" I think), then you
> > can simply restart it and it should pickup where it left off. If not you
> > must run it again from the beginning.
> >
> > If you are switching devices when one is full during a Job, it is unlikely
> > you can restore that job when it terminates. I recommend carefully testing
> > restores on your system.
> >
> > Best regards,
> >
> > Kern
> >
> > On 09/06/2017 05:38 PM, Jerry Lowry wrote:
> >
> > List,
> > I am running, bacula 9.0.3, Mariadb 12.2.8 on Centos 6.9. I got notice
> > last night that my Offsite backup failed due to a bsock error. My offsite
> > drives are attached to an ATTO raid card which gives me hot swap
> > capability. This configuration works great as it allows me to hot swap a
> > drive when it fills up with a new drive to continue with. The problem is
> > included below. The backup that I was doing is to the OffsiteMid drive
> > which is mounted as /dev/sde. Is there a way to restart this backup job or
> > am I left with an incomplete backup going forward.
> >
> > thanks for your help,
> >
> > jerry
> >
> >
> > Sep 5 08:46:01 kilchis bat[4339]: bsock.c:147 Unable to connect to
> > Director dae
> > mon on kilchis:9101. ERR=Connection refused
> > Sep 5 10:37:20 kilchis attocfgd: [CRIT] [ExpressSAS
> > R608,50:01:08:60:00:57:3d:c
> > 0] [FW] RAID Group state now Offline: OffsiteTop
> > Sep 5 10:39:06 kilchis kernel: scsi 5:0:1:0: Direct-Access ATTO
> > Offsite
> > Top00 0001 PQ: 0 ANSI: 5
> > Sep 5 10:39:06 kilchis kernel: sd 5:0:1:0: Attached scsi generic sg6 type
> > 0
> > Sep 5 10:39:06 kilchis kernel: sd 5:0:1:0: [sdd] 488366336 4096-byte
> > logical bl
> > ocks: (2.00 TB/1.81 TiB)
> > Sep 5 10:39:06 kilchis kernel: sd 5:0:1:0: [sdd] Write Protect is off
> > Sep 5 10:39:06 kilchis kernel: sd 5:0:1:0: [sdd] Write cache: enabled,
> > read cac
> > he: enabled, doesn't support DPO or FUA
> > Sep 5 10:39:06 kilchis kernel: sd 5:0:1:0: [sdd] 488366336 4096-byte
> > logical bl
> > ocks: (2.00 TB/1.81 TiB)
> > Sep 5 10:39:06 kilchis kernel: sdd: unknown partition table
> > Sep 5 10:39:06 kilchis kernel: sd 5:0:1:0: [sdd] 488366336 4096-byte
> > logical bl
> > ocks: (2.00 TB/1.81 TiB)
> > Sep 5 10:39:06 kilchis kernel: sd 5:0:1:0: [sdd] Attached SCSI disk
> > Sep 5 10:39:35 kilchis kernel: sd 5:0:1:0: [sdd] 488366336 4096-byte
> > logical bl
> > ocks: (2.00 TB/1.81 TiB)
> > Sep 5 10:39:35 kilchis kernel: sdd:
> > Sep 5 10:44:54 kilchis kernel: EXT4-fs (sdd): mounted filesystem with
> > ordered d
> > ata mode. Opts:
> > Sep 5 11:02:38 kilchis bacula-dir[4373]: bsock.c:537 Socket has errors=1
> > on cal
> > l to client:10.20.10.21:9101
> > Sep 5 11:02:38 kilchis bacula-dir[4373]: bsock.c:537 Socket has errors=1
> > on cal
> > l to client:10.20.10.21:9101
> > Sep 5 11:02:38 kilchis bacula-dir[4373]: bsock.c:537 Socket has errors=1
> > on cal
> > l to client:10.20.10.21:9101
> > Sep 5 11:02:38 kilchis bacula-dir[4373]: bsock.c:537 Socket has errors=1
> > on cal
> > l to client:10.20.10.21:9101
> > Sep 5 11:02:38 kilchis bacula-dir[4373]: bsock.c:537 Socket has errors=1
> > on cal
> > l to client:10.20.10.21:9101
> > Sep 5 11:02:38 kilchis bacula-dir[4373]: bsock.c:537 Socket has errors=1
> > on cal
> > l to client:10.20.10.21:9101
> > Sep 5 11:02:38 kilchis bacula-dir[4373]: bsock.c:537 Socket has errors=1
> > on cal
> > l to client:10.20.10.21:9101
> > Sep 5 13:45:48 kilchis attocfgd: [CRIT] [ExpressSAS
> > R608,50:01:08:60:00:57:3d:c
> > 0] [FW] RAID Group state now Offline: OffsiteMid
> > Sep 5 13:45:53 kilchis attocfgd: [CRIT] [ExpressSAS
> > R608,50:01:08:60:00:57:3d:c
> > 0] [FW] RAID Group state now Offline: OffsiteTop
> > Sep 5 13:47:52 kilch
