Re: [Bacula-users] how to configure email notifications in bacula?
but it is not possible for any of the environment variables in the content of the mail only tell me that it was successful or failed? 2016-03-08 14:01 GMT-05:00 Dan Langille <d...@langille.org>: > On Mar 8, 2016, at 10:29 AM, Hector Javier Agudelo Corredor < > hej...@gmail.com> wrote: > > Hi. > I want to set the bacula for me only send the status of the backup as this > is satisfactory and where failed send a detailed error. Currently with > default settings send me a detailed backup done correctly, > > that changes can I make? > > --- > Messages { > Name = Standard > . > > > mailcommand = "/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s > \"Bacula: %t %e of %c %l\" %r" > operatorcommand = "/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s > \"Bacula: Intervention needed for %j\" %r" > mail = pru...@prueba.com= all, !skipped > operator = pru...@prueba.com = mount > console = all, !skipped, !saved > > append = "/opt/bacula/log/bacula.log" = all, !skipped > catalog = all > } > > --- > I receive the following information by email: > > 08-Mar 10:05 bacula74mysql.prueba.net-dir JobId 115: Start Backup JobId > 115, Job=Bkbacula74web.2016-03-08_10.05.18_06 > 08-Mar 10:05 bacula74mysql.prueba.net-dir JobId 115: Using Device > "FileChgr1-Dev1" to write. > 08-Mar 10:05 bacula74mysql.prueba.net-sd JobId 115: Volume > "Remoto_bacula74web-0002" previously written, moving to end of data. > 08-Mar 10:05 bacula74mysql.prueba.net-sd JobId 115: Ready to append to > end of Volume "Remoto_bacula74web-0002" size=153,738,358 08-Mar 10:05 > bacula74mysql.prueba.net-sd JobId 115: Spooling data ... > 08-Mar 10:05 bacula74mysql.prueba.net-sd JobId 115: Committing spooled > data to Volume "Remoto_bacula74web-0002". Despooling 76,882,385 bytes ... > 08-Mar 10:05 bacula74mysql.prueba.net-sd JobId 115: Despooling elapsed > time = 00:00:01, Transfer rate = 76.88 M Bytes/second 08-Mar 10:05 > bacula74mysql.prueba.net-sd JobId 115: Elapsed time=00:00:12, Transfer > rate=6.400 M Bytes/second 08-Mar 10:05 bacula74mysql.prueba.net-sd JobId > 115: Sending spooled attrs to the Director. Despooling 5,193 bytes ... > 08-Mar 10:05 bacula74mysql.prueba.net-dir JobId 115: Bacula > bacula74mysql.prueba.net-dir 7.2.0 (14Aug15): > Build OS: x86_64-unknown-linux-gnu redhat > JobId: 115 > Job:Bkbacula74web.2016-03-08_10.05.18_06 > Backup Level: Full > Client: "bacula74web.prueba.net-fd" 7.2.0 (14Aug15) > x86_64-unknown-linux-gnu,redhat, > FileSet:"Bkbacula74webremoto" 2016-02-08 18:44:51 > Pool: "Remote_bacula74web" (From Job resource) > Catalog:"MyCatalog" (From Client resource) > Storage:"File1" (From command line) > Scheduled time: 08-Mar-2016 10:05:18 > Start time: 08-Mar-2016 10:05:20 > End time: 08-Mar-2016 10:05:32 > Elapsed time: 12 secs > Priority: 10 > FD Files Written: 19 > SD Files Written: 19 > FD Bytes Written: 76,808,044 (76.80 MB) > SD Bytes Written: 76,810,105 (76.81 MB) > Rate: 6400.7 KB/s > Software Compression: None > Snapshot/VSS: no > Encryption: no > Accurate: no > Volume name(s): Remoto_bacula74web-0002 > Volume Session Id: 1 > Volume Session Time:1457449495 > Last Volume Bytes: 230,606,439 (230.6 MB) > Non-fatal FD errors:0 > SD Errors: 0 > FD termination status: OK > SD termination status: OK > Termination:Backup OK > > 08-Mar 10:05 bacula74mysql.prueba.net-dir JobId 115: Begin pruning Jobs > older than 6 months . > 08-Mar 10:05 bacula74mysql.prueba.net-dir JobId 115: No Jobs found to > prune. > 08-Mar 10:05 bacula74mysql.prueba.net-dir JobId 115: Begin pruning Files. > 08-Mar 10:05 bacula74mysql.prueba.net-dir JobId 115: No Files found to > prune. > 08-Mar 10:05 bacula74mysql.prueba.net-dir JobId 115: End auto prune\ > > > I take all the email, then filter them, based on 'Bacula: Backup OK' in > the subject. > > For example, you could do this with procmail or mailfilter. > > > > -- HECTOR -- Transform Data into Opportunity. Accelerate data analysis in your applications with Intel Data Analytics Acceleration Library. Click to learn more. http://makebettercode.com/inteldaal-eval___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] how to configure email notifications in bacula?
Hi. I want to set the bacula for me only send the status of the backup as this is satisfactory and where failed send a detailed error. Currently with default settings send me a detailed backup done correctly, that changes can I make? --- Messages { Name = Standard . mailcommand = "/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: %t %e of %c %l\" %r" operatorcommand = "/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: Intervention needed for %j\" %r" mail = pru...@prueba.com= all, !skipped operator = pru...@prueba.com = mount console = all, !skipped, !saved append = "/opt/bacula/log/bacula.log" = all, !skipped catalog = all } --- I receive the following information by email: 08-Mar 10:05 bacula74mysql.prueba.net-dir JobId 115: Start Backup JobId 115, Job=Bkbacula74web.2016-03-08_10.05.18_06 08-Mar 10:05 bacula74mysql.prueba.net-dir JobId 115: Using Device "FileChgr1-Dev1" to write. 08-Mar 10:05 bacula74mysql.prueba.net-sd JobId 115: Volume "Remoto_bacula74web-0002" previously written, moving to end of data. 08-Mar 10:05 bacula74mysql.prueba.net-sd JobId 115: Ready to append to end of Volume "Remoto_bacula74web-0002" size=153,738,358 08-Mar 10:05 bacula74mysql.prueba.net-sd JobId 115: Spooling data ... 08-Mar 10:05 bacula74mysql.prueba.net-sd JobId 115: Committing spooled data to Volume "Remoto_bacula74web-0002". Despooling 76,882,385 bytes ... 08-Mar 10:05 bacula74mysql.prueba.net-sd JobId 115: Despooling elapsed time = 00:00:01, Transfer rate = 76.88 M Bytes/second 08-Mar 10:05 bacula74mysql.prueba.net-sd JobId 115: Elapsed time=00:00:12, Transfer rate=6.400 M Bytes/second 08-Mar 10:05 bacula74mysql.prueba.net-sd JobId 115: Sending spooled attrs to the Director. Despooling 5,193 bytes ... 08-Mar 10:05 bacula74mysql.prueba.net-dir JobId 115: Bacula bacula74mysql.prueba.net-dir 7.2.0 (14Aug15): Build OS: x86_64-unknown-linux-gnu redhat JobId: 115 Job:Bkbacula74web.2016-03-08_10.05.18_06 Backup Level: Full Client: "bacula74web.prueba.net-fd" 7.2.0 (14Aug15) x86_64-unknown-linux-gnu,redhat, FileSet:"Bkbacula74webremoto" 2016-02-08 18:44:51 Pool: "Remote_bacula74web" (From Job resource) Catalog:"MyCatalog" (From Client resource) Storage:"File1" (From command line) Scheduled time: 08-Mar-2016 10:05:18 Start time: 08-Mar-2016 10:05:20 End time: 08-Mar-2016 10:05:32 Elapsed time: 12 secs Priority: 10 FD Files Written: 19 SD Files Written: 19 FD Bytes Written: 76,808,044 (76.80 MB) SD Bytes Written: 76,810,105 (76.81 MB) Rate: 6400.7 KB/s Software Compression: None Snapshot/VSS: no Encryption: no Accurate: no Volume name(s): Remoto_bacula74web-0002 Volume Session Id: 1 Volume Session Time:1457449495 Last Volume Bytes: 230,606,439 (230.6 MB) Non-fatal FD errors:0 SD Errors: 0 FD termination status: OK SD termination status: OK Termination:Backup OK 08-Mar 10:05 bacula74mysql.prueba.net-dir JobId 115: Begin pruning Jobs older than 6 months . 08-Mar 10:05 bacula74mysql.prueba.net-dir JobId 115: No Jobs found to prune. 08-Mar 10:05 bacula74mysql.prueba.net-dir JobId 115: Begin pruning Files. 08-Mar 10:05 bacula74mysql.prueba.net-dir JobId 115: No Files found to prune. 08-Mar 10:05 bacula74mysql.prueba.net-dir JobId 115: End auto prune -- HECTOR -- Transform Data into Opportunity. Accelerate data analysis in your applications with Intel Data Analytics Acceleration Library. Click to learn more. http://makebettercode.com/inteldaal-eval___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Unable to connect to Director daemon on localhost:9101 Client Bacula
hi i am follow this web page https://www.digitalocean.com/community/tutorials/how-to-back-up-an-ubuntu-14-04-server-with-bacula because i want to remote backup. i configure the file that connect to client as follows file path on the server bacula: /etc/bacula/conf.d/bacula5.conf Client { Name = bacula5.prueba.net-fd Address = bacula5.prueba.net FDPort = 9102 Catalog = MyCatalog Password = "YWUxYzJmY2MxOWI0N2IxNjczYTYzZjQ4Y" # password for Remote FileDaemon File Retention = 30 days# 30 days Job Retention = 6 months# six months AutoPrune = yes # Prune expired Jobs/Files } Job { Name = "Backupbacula5remoto" JobDefs = "DefaultJob" Client = bacula5.prueba.net-fd Pool = RemoteFile FileSet="Home and Etc" } FileSet { Name = "Backupbacula5remoto" Include { Options { signature = MD5 compression = GZIP } File = /home File = /etc } Exclude { File = /home/bacula/ } } Pool { Name = RemoteFile Pool Type = Backup Label Format = Remote- Recycle = yes # Bacula can automatically recycle Volumes AutoPrune = yes # Prune expired volumes Volume Retention = 365 days # one year Maximum Volume Bytes = 50G # Limit Volume size to something reasonable Maximum Volumes = 100 # Limit number of Volumes in Pool } - at the end of file bacula-dir server bacula place the following line to load the bacula5.conf @|"find /etc/bacula/conf.d -name '*.conf' -type f -exec echo @{} \;" if I comment this line and restart the bacula the bconsole connected, so there is an error in the file bacula5.conf -- this is configuration bacula client fd Director { Name = bacula7.prueba.net-dir Password = "YWUxYzJmY2MxOWI0N2IxNjczYTYzZjQ4Y" } Director { Name = bacula-mon Password = "YWUxYzJmY2MxOWI0N2IxNjczYTY" Monitor = yes } FileDaemon { # this is me Name = bacula5.prueba.net-fd FDAddress = bacula5.prueba.net FDport = 9102 # where we listen for the director WorkingDirectory = /var/spool/bacula Pid Directory = /var/run Maximum Concurrent Jobs = 20 } # Send all messages except skipped files back to Director Messages { Name = Standard director = bacula7.prueba.net-dir = all, !skipped, !restored } How I can solve it? -- HECTOR -- Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151=/4140___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] TLS required but not configured in Bacula.
hi Ana I did the steps you provided me however in the summary does not show me the active support TLS. is nomal? Configuration on Sat Jan 30 14:47:32 COT 2016: Host: x86_64-unknown-linux-gnu -- redhat Bacula version: Bacula 7.2.0 (14 August 2015) Source code location: . Install binaries: /sbin Install libraries:/usr/lib64 Install config files: /etc/bacula Scripts directory:/etc/bacula Archive directory:/tmp Working directory:/opt/bacula/working PID directory:/var/run Subsys directory: /var/lock/subsys Man directory:${datarootdir}/man Data directory: /usr/share Plugin directory: /usr/lib64 C Compiler: gcc 4.4.7 C++ Compiler: /usr/bin/g++ 4.4.7 Compiler flags:-g -O2 -Wall -fno-strict-aliasing -fno-exceptions -fno-rtti Linker flags: Libraries:-lpthread -ldl -ldl Statically Linked Tools: no Statically Linked FD: no Statically Linked SD: no Statically Linked DIR:no Statically Linked CONS: no Database backends:MySQL Database port: Database name:bacula Database user:bacula Job Output Email: root@localhost Traceback Email: root@localhost SMTP Host Address:localhost Director Port:9101 File daemon Port: 9102 Storage daemon Port: 9103 Director User: Director Group: Storage Daemon User: Storage DaemonGroup: File Daemon User: File Daemon Group: Large file support: yes Bacula conio support: no readline support: no TCP Wrappers support: no TLS support: no Encryption support: no ZLIB support: yes LZO support: no enable-smartalloc:yes enable-lockmgr: no bat support: no client-only: no build-dird: yes build-stored: yes Plugin support: yes AFS support: no ACL support: no XATTR support:yes systemd support: no Batch insert enabled: MySQL 2016-02-02 16:57 GMT-05:00 Ana Emília M. Arruda <emiliaarr...@gmail.com>: > Hello Hector, > > You can run ./configure --with-openssl (and all your previously options) > for enabling SSL support (then make and make install). This will not modify > or delete your conf files and catalog database. > > Best regards, > Ana > > On Tue, Feb 2, 2016 at 10:19 PM, Hector Javier Agudelo Corredor < > hej...@gmail.com> wrote: > >> hi. >> >> bacula already had installed 7.2, 9.3.9 and MySQL 7.0 webacula. But when >> I was setting my certificates for TLS I went the following error; >> >> [root @ bacula74mysql bacula-7.2.0] # sudo bacula-dir -tc >> /etc/bacula/bacula-dir.conf >> 29-Jan 20:47 bacula-dir JobId 0: Fatal error: TLS required but not >> configured in Bacula. >> >> I want to know if i can do without having to install bacula . or touch >> again compile ./configure --with-mysql --with-openssl >> >> I appreciate your help. >> >> -- >> HECTOR >> >> >> -- >> Site24x7 APM Insight: Get Deep Visibility into Application Performance >> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month >> Monitor end-to-end web transactions and take corrective actions now >> Troubleshoot faster and improve end-user experience. Signup Now! >> http://pubads.g.doubleclick.net/gampad/clk?id=267308311=/4140 >> ___ >> Bacula-users mailing list >> Bacula-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/bacula-users >> >> > -- HECTOR -- Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=267308311=/4140___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] TLS required but not configured in Bacula.
thaks heitor yum install openssl-devel work It worked perfect now I make my validations on the installation.I hope you do not have to re-install bacula. thanks for you help. 2016-02-03 11:48 GMT-05:00 Heitor Faria <hei...@bacula.com.br>: > Hello Hector: you must install the openssl devel package before configure. > > Regards, > === > > Heitor Medrado de Faria - LPIC-III | ITIL-F | Bacula Systems Certified > Administrator II > Do you need Bacula training? <http://bacula.us/video-classes> > http://bacula.us/video-classes/ > +55 61 8268-4220 > Site: <http://bacula.us>http://bacula.us FB: heitor.faria > === > > > Enviado por TypeApp <http://www.typeapp.com/r> > > Em 3 de fev de 2016, pelo 14:43, Hector Javier Agudelo Corredor < > hej...@gmail.com> escrito: >> >> hi >> >> lready had installed the version openssl >> >> OpenSSL> versión >> de OpenSSL 1.0.1e-fips 11 de febrero 2013 >> >> again run ./configure --with-mysql --with-openssl but the summary leaves >> me again: >> >> TCP Wrappers support: no >> TLS support: no >> >> It validates when openssl tells me no >> >> checking varargs.h presence... no >> checking for varargs.h... no >> checking for socket... yes >> using libc's socket >> checking for OpenSSL... no >> checking for library containing dlopen... (cached) -ldl >> checking for PostgreSQL support... no >> checking for MySQL support... yes >> >> I change the following parameter in the file configure, before support >> tls and crypto had no, i change for yes. but neither changes to the file >> set change status check >> >> support_smartalloc=yes >> support_readline=yes >> support_lzo=yes >> support_conio=yes >> support_bat=no >> support_tls=yes >> support_crypto=yes >> support_static_tools=no >> support_static_fd=no >> support_static_sd=no >> support_static_dir=no >> support_static_cons=no >> build_client_only=no >> build_dird=yes >> build_stored=yes >> db_backends="" >> batch_insert_db_backends="" >> support_lockmgr=no >> >> what i can do? >> >> 2016-02-03 11:27 GMT-05:00 Michael Munger <mich...@highpoweredhelp.com>: >> >>> Just out of curiosity, have you done: >>> >>> >>> >>> yum-builddep bacula? >>> >>> >>> >>> >>> >>> Michael Munger, dCAP, MCPS, MCNPS, MBSS >>> High Powered Help, Inc. >>> Microsoft Certified Professional >>> Microsoft Certified Small Business Specialist >>> Digium Certified Asterisk Professional >>> mich...@highpoweredhelp.com >>> >>> >>> >>> *From:* Hector Javier Agudelo Corredor [mailto:hej...@gmail.com] >>> *Sent:* Wednesday, February 3, 2016 9:56 AM >>> *To:* Ana Emília M. Arruda <emiliaarr...@gmail.com> >>> *Cc:* Bacula-users@lists.sourceforge.net; Foro Bacula < >>> bacula-users...@lists.sourceforge.net> >>> *Subject:* Re: [Bacula-users] TLS required but not configured in Bacula. >>> >>> >>> >>> hi Ana >>> >>> >>> >>> I did the steps you provided me however in the summary does not show me >>> the active support TLS. is nomal? >>> >>> >>> >>> Configuration on Sat Jan 30 14:47:32 COT 2016: >>> >>> >>> >>>Host: x86_64-unknown-linux-gnu -- redhat >>> >>>Bacula version: Bacula 7.2.0 (14 August 2015) >>> >>>Source code location: . >>> >>>Install binaries: /sbin >>> >>>Install libraries:/usr/lib64 >>> >>>Install config files: /etc/bacula >>> >>>Scripts directory:/etc/bacula >>> >>>Archive directory:/tmp >>> >>>Working directory:/opt/bacula/working >>> >>>PID directory:/var/run >>> >>>Subsys directory: /var/lock/subsys >>> >>>Man directory:${datarootdir}/man >>> >>>Data directory: /usr/share >>> >>>Plugin directory: /usr/lib64 >>> >>>C Compiler: gcc 4.4.7 >&
Re: [Bacula-users] TLS required but not configured in Bacula.
hi lready had installed the version openssl OpenSSL> versión de OpenSSL 1.0.1e-fips 11 de febrero 2013 again run ./configure --with-mysql --with-openssl but the summary leaves me again: TCP Wrappers support: no TLS support: no It validates when openssl tells me no checking varargs.h presence... no checking for varargs.h... no checking for socket... yes using libc's socket checking for OpenSSL... no checking for library containing dlopen... (cached) -ldl checking for PostgreSQL support... no checking for MySQL support... yes I change the following parameter in the file configure, before support tls and crypto had no, i change for yes. but neither changes to the file set change status check support_smartalloc=yes support_readline=yes support_lzo=yes support_conio=yes support_bat=no support_tls=yes support_crypto=yes support_static_tools=no support_static_fd=no support_static_sd=no support_static_dir=no support_static_cons=no build_client_only=no build_dird=yes build_stored=yes db_backends="" batch_insert_db_backends="" support_lockmgr=no what i can do? 2016-02-03 11:27 GMT-05:00 Michael Munger <mich...@highpoweredhelp.com>: > Just out of curiosity, have you done: > > > > yum-builddep bacula? > > > > > > Michael Munger, dCAP, MCPS, MCNPS, MBSS > High Powered Help, Inc. > Microsoft Certified Professional > Microsoft Certified Small Business Specialist > Digium Certified Asterisk Professional > mich...@highpoweredhelp.com > > > > *From:* Hector Javier Agudelo Corredor [mailto:hej...@gmail.com] > *Sent:* Wednesday, February 3, 2016 9:56 AM > *To:* Ana Emília M. Arruda <emiliaarr...@gmail.com> > *Cc:* Bacula-users@lists.sourceforge.net; Foro Bacula < > bacula-users...@lists.sourceforge.net> > *Subject:* Re: [Bacula-users] TLS required but not configured in Bacula. > > > > hi Ana > > > > I did the steps you provided me however in the summary does not show me > the active support TLS. is nomal? > > > > Configuration on Sat Jan 30 14:47:32 COT 2016: > > > >Host: x86_64-unknown-linux-gnu -- redhat > >Bacula version: Bacula 7.2.0 (14 August 2015) > >Source code location: . > >Install binaries: /sbin > >Install libraries:/usr/lib64 > >Install config files: /etc/bacula > >Scripts directory:/etc/bacula > >Archive directory:/tmp > >Working directory:/opt/bacula/working > >PID directory:/var/run > >Subsys directory: /var/lock/subsys > >Man directory:${datarootdir}/man > >Data directory: /usr/share > >Plugin directory: /usr/lib64 > >C Compiler: gcc 4.4.7 > >C++ Compiler: /usr/bin/g++ 4.4.7 > >Compiler flags:-g -O2 -Wall -fno-strict-aliasing > -fno-exceptions -fno-rtti > >Linker flags: > >Libraries:-lpthread -ldl -ldl > >Statically Linked Tools: no > >Statically Linked FD: no > >Statically Linked SD: no > >Statically Linked DIR:no > >Statically Linked CONS: no > >Database backends:MySQL > >Database port: > >Database name:bacula > >Database user:bacula > > > >Job Output Email: root@localhost > >Traceback Email: root@localhost > >SMTP Host Address:localhost > > > >Director Port:9101 > >File daemon Port: 9102 > >Storage daemon Port: 9103 > > > >Director User: > >Director Group: > >Storage Daemon User: > >Storage DaemonGroup: > >File Daemon User: > >File Daemon Group: > > > >Large file support: yes > >Bacula conio support: no > >readline support: no > >TCP Wrappers support: no > >TLS support: no > >Encryption support: no > >ZLIB support: yes > >LZO support: no > >enable-smartalloc:yes > >enable-lockmgr: no > >bat support: no > >client-only: no > >build-dird: yes > >build-stored: yes > >Plugin support: yes > >AFS support: no > > ACL support: no > >XATTR support:yes > >systemd support: no > >Batch insert enabled: MySQL > > > > 2016-02-02 16:57 GMT-05:00
[Bacula-users] TLS required but not configured in Bacula.
hi. bacula already had installed 7.2, 9.3.9 and MySQL 7.0 webacula. But when I was setting my certificates for TLS I went the following error; [root @ bacula74mysql bacula-7.2.0] # sudo bacula-dir -tc /etc/bacula/bacula-dir.conf 29-Jan 20:47 bacula-dir JobId 0: Fatal error: TLS required but not configured in Bacula. I want to know if i can do without having to install bacula . or touch again compile ./configure --with-mysql --with-openssl I appreciate your help. -- HECTOR -- Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=267308311=/4140___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Error Director /usr/lib64/libbaccats-7.4.0.so: undefined symbol: mysql_init
HI team I installed centos 6.7. I have installed bacula 7.4 with postgres 5.7.10 but when I set the mysql password in the file director. Catalog { Name = MyCatalog dbname = "bacula"; dbuser = "root"; dbpassword = "Bacula2016.," } But when I test settings file manager with the command bacula-dir sudo -tc /etc/bacula/bacula-dir.conf get the following error: bacula-dir: symbol lookup error: /usr/lib64/libbaccats-7.4.0.so: undefined symbol: mysql_init previously install the following packages: gcc gcc-c ++ eadline-devel zlib-devel libacl mtx-devel and openssl-devel postfix How I can fix this error? that the director does not connect to the database. -- HECTOR -- Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=267308311=/4140___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users