subject:"\[Bacula\-users\] DDS4 DAT Tape Drive Failure\?"

Re: [Bacula-users] DDS4 DAT Tape Drive Failure?

2007-03-08 Thread Martin Simmons

> On Thu, 8 Mar 2007 12:06:45 +, Alan To said:
> 
>   Hi Dan, Hi All
> 
> It is slightly difficult to check [movement] as the server is on
> a separate site to where I am based.  Anyway I have just catalogued my scsi
> devices and yes, it is there/detected:
> # cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
>   Vendor: ADAPTEC  Model: AAR-2410SA RAID5 Rev: V1.0
>   Type:   Direct-AccessANSI SCSI revision: 02
> Host: scsi1 Channel: 00 Id: 00 Lun: 00
>   Vendor: ATA  Model: WDC WD400JD-00LS Rev: 06.0
>   Type:   Direct-AccessANSI SCSI revision: 05
> Host: scsi2 Channel: 00 Id: 03 Lun: 00
>   Vendor: HP   Model: C5683A   Rev: C111
>   Type:   Sequential-AccessANSI SCSI revision: 02
> 
> If it wasn't detected then I would not be able to do the mt command (I would
> get the error "No such device or address" instead) e.g. (I don't have a
> second tape drive so nst1 has nothing there):
> # mt -f /dev/nst0 rewind
> /dev/nst0: Input/output error
> # mt -f /dev/nst1 rewind
> /dev/nst1: No such device or address
> 
> What's next can I troubleshoot, prior to purchasing new hardware=20=
> or going to the site?

Is that /proc/scsi/scsi after rebooting?  If not, possibly it is old info and
the device is now not connected.  Any syslog/console messages when you run mt
rewind?

__Martin

-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Re: [Bacula-users] DDS4 DAT Tape Drive Failure?

2007-03-08 Thread Alan To

  Hi Dan, Hi All

It is slightly difficult to check [movement] as the server is on a separate 
site to where I am based.  Anyway I have just catalogued my scsi devices and 
yes, it is there/detected:
# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: ADAPTEC  Model: AAR-2410SA RAID5 Rev: V1.0
  Type:   Direct-AccessANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: ATA  Model: WDC WD400JD-00LS Rev: 06.0
  Type:   Direct-AccessANSI SCSI revision: 05
Host: scsi2 Channel: 00 Id: 03 Lun: 00
  Vendor: HP   Model: C5683A   Rev: C111
  Type:   Sequential-AccessANSI SCSI revision: 02

If it wasn't detected then I would not be able to do the mt command (I would 
get the error "No such device or address" instead) e.g. (I don't have a second 
tape drive so nst1 has nothing there):
# mt -f /dev/nst0 rewind
/dev/nst0: Input/output error
# mt -f /dev/nst1 rewind
/dev/nst1: No such device or address

What's next can I troubleshoot, prior to purchasing new hardware or going to 
the site?

-- Many Thanks
Alan To




From: HAWKER, Dan (external) [mailto:[EMAIL PROTECTED]
Sent: 08 March 2007 11:40
To: Alan To;bacula-users@lists.sourceforge.net
Subject: RE: [Bacula-users] DDS4 DAT Tape Drive Failure?



I have been happily doing nightly full backups on one of my Linux Servers for a 
few months now.  However, since the beginning of this week I have been getting 
the following errors.  Has my Tape Drive failed?  Has a cable got broken?  
Could somebody give me a How-To in order to Troubleshoot my tape drive please?

07-Mar 21:32 Server-dir: RunBefore: 3901 open device failed: ERR=dev.c:289 
stored: unable to open device /dev/nst0: ERR=Input/output error 07-Mar 21:32 
Server-dir: RunBefore:
07-Mar 21:32 Server-dir: RunBefore: You have messages.
07-Mar 21:32 Server-dir: RunBefore: exit 07-Mar 21:32 Server-dir: Start Backup 
JobId 900, Job=HaverhillJob.2007-03-07_21.30.00
07-Mar 21:34 Server-fd: HaverhillJob.2007-03-07_21.30.00 Fatal error: 
job.c:1665 Bad response to Append Data command. Wanted 3000 OK data , got 3903 
Error append data
07-Mar 21:34 Server-sd: HaverhillJob.2007-03-07_21.30.00 Fatal error: 
device.c:317 Unable to open device /dev/nst0. ERR=dev.c:289 stored: unable to 
open device /dev/nst0: ERR=Input/output error

Here is part of my "dmesg" with my Tape Drive detected:-

scsi2 : Initio INI-A100U2W SCSI device driver; Revision: 1.02d
Vendor: HP Model: C5683A Rev: C111
Type: Sequential-Access ANSI SCSI revision: 02
st: Version 20040403, fixed bufsize 32768, s/g segs 256
Attached scsi tape st0 at scsi2, channel 0, id 3, lun 0
st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 1048575


Note that mt commands (such as mt -f /dev/nst0 rewind or mt -f /dev/st0 rewind) 
also give me input/output errors, when I turn Bacula off.


Hi Alan,

Sounds like its either dead or just unplugged. Done any moving around lately??? 
 What do you have in /proc/scsi/scsi ??? (# cat /proc/scsi/scsi)

It should list (depending upon your setup) the tape drive and maybe some 
SCSI/SATA/USB hard disks too, in fact anything that uses the generic SCSI 
kernel module.

If your tape drive isn't listed then the kernel knows nothing of it and it just 
ain't going to work (and hence why mt and bacula fail). If it is, then it could 
be something more difficult to pin down.

If it isn't listed, then you'll need to check the usual things (powered on or 
not, everything plugged in correctly, SCSI termination, etc, etc). Is there 
anything else plugged into the HBA that could have died??? Could the HBA be 
faulty or the drive??? Just try some usual checks, move the drive to another 
HBA to see if its OK or the HBA is dead, check its not been in-advertently 
powered off (cable unplugged, tripped over cable, etc, etc)...

And so on and so on...

HTH

Dan

--

Dan Hawker
Linux System Administrator
Astrium
http://www.astrium.eads.net

--
This email (including any attachments) may contain confidential and/or 
privileged information or information otherwise protected from disclosure.
If you are not the intended recipient, please notify the sender immediately, do 
not copy this message or any attachments and do not use it for any purpose or 
disclose its content to any person, but delete this message and any attachments 
from your system.
Astrium disclaims any and all liability if this email transmission was virus 
corrupted, altered or falsified.
-
Astrium Limited, Registered in England and Wales No. 2449259
Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to shar

Re: [Bacula-users] DDS4 DAT Tape Drive Failure?

2007-03-08 Thread HAWKER, Dan (external)




07-Mar 21:32 Server-dir: RunBefore: 3901 open device failed:
ERR=dev.c:289 stored: unable to open device /dev/nst0: ERR=Input/output
error 07-Mar 21:32 Server-dir: RunBefore:
07-Mar 21:32 Server-dir: RunBefore: You have messages.
07-Mar 21:32 Server-dir: RunBefore: exit 07-Mar 21:32
Server-dir: Start Backup JobId 900, Job=HaverhillJob.2007-03-07_21.30.00
07-Mar 21:34 Server-fd: HaverhillJob.2007-03-07_21.30.00 Fatal
error: job.c:1665 Bad response to Append Data command. Wanted 3000 OK
data , got 3903 Error append data
07-Mar 21:34 Server-sd: HaverhillJob.2007-03-07_21.30.00 Fatal
error: device.c:317 Unable to open device /dev/nst0. ERR=dev.c:289
stored: unable to open device /dev/nst0: ERR=Input/output error

Here is part of my "dmesg" with my Tape Drive detected:-

scsi2 : Initio INI-A100U2W SCSI device driver; Revision: 1.02d
Vendor: HP Model: C5683A Rev: C111
Type: Sequential-Access ANSI SCSI revision: 02
st: Version 20040403, fixed bufsize 32768, s/g segs 256
Attached scsi tape st0 at scsi2, channel 0, id 3, lun 0
st0: try direct i/o: yes (alignment 512 B), max page reachable
by HBA 1048575


Note that mt commands (such as mt -f /dev/nst0 rewind or mt -f
/dev/st0 rewind) also give me input/output errors, when I turn Bacula
off.



Hi Alan,

Sounds like its either dead or just unplugged. Done any moving around
lately???  What do you have in /proc/scsi/scsi ??? (# cat
/proc/scsi/scsi)

It should list (depending upon your setup) the tape drive and maybe some
SCSI/SATA/USB hard disks too, in fact anything that uses the generic
SCSI kernel module.

If your tape drive isn't listed then the kernel knows nothing of it and
it just ain't going to work (and hence why mt and bacula fail). If it
is, then it could be something more difficult to pin down.

If it isn't listed, then you'll need to check the usual things (powered
on or not, everything plugged in correctly, SCSI termination, etc, etc).
Is there anything else plugged into the HBA that could have died???
Could the HBA be faulty or the drive??? Just try some usual checks, move
the drive to another HBA to see if its OK or the HBA is dead, check its
not been in-advertently powered off (cable unplugged, tripped over
cable, etc, etc)...

And so on and so on...

HTH

Dan

--

Dan Hawker
Linux System Administrator
Astrium
http://www.astrium.eads.net 

--



This email (including any attachments) may contain confidential and/or 
privileged information or information otherwise protected from disclosure.
If you are not the intended recipient, please notify the sender immediately, do 
not copy this message or any attachments and do not use it for any purpose or 
disclose its content to any person, but delete this message and any attachments 
from your system.
Astrium disclaims any and all liability if this email transmission was virus 
corrupted, altered or falsified.
-
Astrium Limited, Registered in England and Wales No. 2449259
Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Re: [Bacula-users] DDS4 DAT Tape Drive Failure?

2007-03-08 Thread Alan To

  Hi

My Scsi Card is an Adaptec ASC-19160, and I have a HP Surestore DAT 40i 
(C5686A).  Both items are over four years old (Oct 2002) so maybe either/both 
items do need replacing.  It's a last resort thing to do though.  Are there any 
troubleshooting tips first?

-- Regards
Alan To




From: Xeos Laenor [mailto:[EMAIL PROTECTED]
Sent: 08 March 2007 11:10
To: Alan To
Subject: Re: [Bacula-users] DDS4 DAT Tape Drive Failure?


Hi,
I have had the same error.
What is your scsi adapter? Adaptec?

Franck


2007/3/8, Alan To <[EMAIL PROTECTED]>:
  Hi All

I have been happily doing nightly full backups on one of my Linux Servers for a 
few months now.  However, since the beginning of this week I have been getting 
the following errors.  Has my Tape Drive failed?  Has a cable got broken?  
Could somebody give me a How-To in order to Troubleshoot my tape drive please?

My failed log is below:-

07-Mar 21:30 Server-dir: RunBefore: Connecting to Director localhost:9101
07-Mar 21:30 Server-dir: RunBefore: 1000 OK: Server-dir Version: 1.36.2 (28 
February 2005)
07-Mar 21:30 Server-dir: RunBefore: Enter a period to cancel a command.
07-Mar 21:30 Server-dir: RunBefore: mount storage=DDS4
07-Mar 21:30 Server-dir: RunBefore: Using default Catalog name=MyCatalog 
DB=bacula
07-Mar 21:32 Server-dir: RunBefore: 3901 open device failed: ERR=dev.c:289 
stored: unable to open device /dev/nst0: ERR=Input/output error 07-Mar 21:32 
Server-dir: RunBefore:
07-Mar 21:32 Server-dir: RunBefore: You have messages.
07-Mar 21:32 Server-dir: RunBefore: exit 07-Mar 21:32 Server-dir: Start Backup 
JobId 900, Job=HaverhillJob.2007-03-07_21.30.00
07-Mar 21:34 Server-fd: HaverhillJob.2007-03-07_21.30.00 Fatal error: 
job.c:1665 Bad response to Append Data command. Wanted 3000 OK data , got 3903 
Error append data
07-Mar 21:34 Server-sd: HaverhillJob.2007-03-07_21.30.00 Fatal error: 
device.c:317 Unable to open device /dev/nst0. ERR=dev.c:289 stored: unable to 
open device /dev/nst0: ERR=Input/output error
07-Mar 21:34 Server-dir: HaverhillJob.2007-03-07_21.30.00 Error: Bacula 1.36.2 
(28Feb05): 07-Mar-2007 21:34:09
JobId: 900
Job: HaverhillJob.2007-03-07_21.30.00
Backup Level: Full
Client: Server-fd
FileSet: "HaverhillFiles" 2006-11-18 00:08:52
Pool: "HaverhillPool"
Storage: "DDS4"
Start time: 07-Mar-2007 21:30:02
End time: 07-Mar-2007 21:34:09
FD Files Written: 0
SD Files Written: 0
FD Bytes Written: 0
SD Bytes Written: 0
Rate: 0.0 KB/s
Software Compression: None
Volume name(s):
Volume Session Id: 1
Volume Session Time: 1173289086
Last Volume Bytes: 1
Non-fatal FD errors: 0
SD Errors: 0
FD termination status: Error
SD termination status: Error
Termination: *** Backup Error ***


Here is part of my "dmesg" with my Tape Drive detected:-

scsi2 : Initio INI-A100U2W SCSI device driver; Revision: 1.02d
Vendor: HP Model: C5683A Rev: C111
Type: Sequential-Access ANSI SCSI revision: 02
st: Version 20040403, fixed bufsize 32768, s/g segs 256
Attached scsi tape st0 at scsi2, channel 0, id 3, lun 0
st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 1048575


Note that mt commands (such as mt -f /dev/nst0 rewind or mt -f /dev/st0 rewind) 
also give me input/output errors, when I turn Bacula off.

Many Thanks
Alan To

Bernhard and Company Ltd
Bilton Road * Rugby * England * CV22 7DT
( +44 1788 811600 * Fax +44 1788 812640
( Toll Free (USA) 1-888 GRIND IT
Website:  http://www.bernhard.co.uk



-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users -
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

[Bacula-users] DDS4 DAT Tape Drive Failure?

2007-03-08 Thread Alan To

Hi   All  
   
I have been happily   doing nightly full backups on one of my Linux Servers for 
a few months now.However, since the beginning of this week I have been 
getting the following   errors.  Has my Tape Drive failed?  Has a cable got 
broken?  Could somebody give   me a How-To in order to Troubleshoot my tape 
drive please?  
   
My failed log is   below:-  
   
07-Mar 21:30 Server-dir: RunBefore:   Connecting to Director localhost:9101  
07-Mar 21:30 Server-dir: RunBefore: 1000   OK: Server-dir Version: 1.36.2 (28 
February 2005)  
07-Mar 21:30 Server-dir: RunBefore: Enter a   period to cancel a command.  
07-Mar 21:30 Server-dir: RunBefore: mount   storage=DDS4  
07-Mar 21:30 Server-dir: RunBefore: Using   default Catalog name=MyCatalog 
DB=bacula  
07-Mar 21:32 Server-dir: RunBefore: 3901   open device failed: ERR=dev.c:289 
stored: unable to open device /dev/nst0:   ERR=Input/output error 07-Mar 21:32 
Server-dir: RunBefore:   
07-Mar 21:32 Server-dir: RunBefore: You   have messages.  
07-Mar 21:32 Server-dir: RunBefore: exit   07-Mar 21:32 Server-dir: Start 
Backup JobId 900,   Job=HaverhillJob.2007-03-07_21.30.00  
07-Mar 21:34 Server-fd:   HaverhillJob.2007-03-07_21.30.00 Fatal error: 
job.c:1665 Bad response to Append   Data command. Wanted 3000 OK data , got 
3903 Error append data  
07-Mar 21:34 Server-sd:   HaverhillJob.2007-03-07_21.30.00 Fatal error: 
device.c:317 Unable to open device   /dev/nst0. ERR=dev.c:289 stored: unable to 
open device /dev/nst0:   ERR=Input/output error  
07-Mar 21:34 Server-dir:   HaverhillJob.2007-03-07_21.30.00 Error: Bacula 
1.36.2 (28Feb05): 07-Mar-2007   21:34:09  
JobId: 900  
Job:   HaverhillJob.2007-03-07_21.30.00  
Backup Level: Full  
Client: Server-fd  
FileSet: "HaverhillFiles" 2006-11-18   00:08:52  
Pool: "HaverhillPool"  
Storage: "DDS4"  
Start time: 07-Mar-2007   21:30:02  
End time: 07-Mar-2007 21:34:09  
FD Files Written: 0  
SD Files Written: 0  
FD Bytes Written: 0  
SD Bytes Written: 0  
Rate: 0.0 KB/s  
Software Compression: None  
Volume name(s):   
Volume Session Id: 1  
Volume Session Time:   1173289086  
Last Volume Bytes: 1  
Non-fatal FD errors: 0  
SD Errors: 0  
FD termination status: Error  
SD termination status: Error  
Termination: *** Backup Error   ***  
   
   
Here is part   of my "dmesg" with my Tape Drive detected:-  
   
scsi2 :   Initio INI-A100U2W SCSI device driver; Revision: 1.02d
Vendor: HP Model:   C5683A Rev: C111
Type: Sequential-Access ANSI SCSI revision: 02
st:   Version 20040403, fixed bufsize 32768, s/g segs 256
Attached scsi tape st0 at   scsi2, channel 0, id 3, lun 0
st0: try direct i/o: yes (alignment 512 B), max   page reachable by HBA 1048575 
 
   
   
Note that mt   commands (such as mt -f /dev/nst0 rewind or mt -f /dev/st0 
rewind) also give me   input/output errors, when I turn Bacula off.  
   
Many   Thanks  
Alan   To  

Bernhard and Company   Ltd
Bilton Road * Rugby * England * CV22 7DT
(   +44 1788 811600 * Fax +44 1788 812640
(   Toll Free (USA) 1-888 GRIND IT
Website:  http://www.bernhard.co.uk 
   
 -
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Re: [Bacula-users] DDS4 DAT Tape Drive Failure?

Re: [Bacula-users] DDS4 DAT Tape Drive Failure?

Re: [Bacula-users] DDS4 DAT Tape Drive Failure?

Re: [Bacula-users] DDS4 DAT Tape Drive Failure?

[Bacula-users] DDS4 DAT Tape Drive Failure?

5 matches

Site Navigation

Mail list logo

Footer information