Re: [Bacula-users] Error BB02. Volume created successfully?
> What should the timing look like? Something I can set in storage.conf in case > this is the issue? It should take at least 1 minute probably closer to 2 minutes to load the tape. Was worried that mtx-changer was completing before the volume was actually loaded. This was just a guess.. John -- The Palm PDK Hot Apps Program offers developers who use the Plug-In Development Kit to bring their C/C++ apps to Palm for a share of $1 Million in cash or HP Products. Visit us here for more details: http://ad.doubleclick.net/clk;226879339;13503038;l? http://clk.atdmt.com/CRS/go/247765532/direct/01/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Error BB02. Volume created successfully?
John, What should the timing look like? Something I can set in storage.conf in case this is the issue? Thanks, JJ -Original Message- From: John Drescher [mailto:dresche...@gmail.com] Sent: Monday, July 26, 2010 4:30 PM To: Jeremiah D. Jester Cc: bacula-users Subject: Re: [Bacula-users] Error BB02. Volume created successfully? 2010/7/26 Jeremiah D. Jester : > I'm getting a bunch of error messages stating a "Volume data error" when I > run 'label barcodes'. John Drescher advised me to rewind that tape and write > and eof to clear the data. However, in this case I did notice that the last > line of output states that it was the volume was created successfully. > Interesting enough the volume does not appear when I issue a 'status slots'. > Any thoughts on this? > > > > Here is the full error message output for one of the volumes. > > > > Thanks, > > JJ > > > > Sending label command for Volume "KL0433" Slot 14 ... > > 3307 Issuing autochanger "unload slot 13, drive 1" command. > > 3304 Issuing autochanger "load slot 14, drive 1" command. > > 3305 Autochanger "load slot 14, drive 1", status is OK. > > block.c:275 Volume data error at 0:0! Wanted ID: "BB02", got "". Buffer > discarded. > > 3000 OK label. VolBytes=64512 DVD=0 Volume="KL0433" Device="Drive2" > (/dev/nst1) > > Catalog record for Volume "KL0433", Slot 14 successfully created. > > Can you look in the log for the timing. Normally the time is listed by each message. I want to see if the system is giving the load enough time. John -- The Palm PDK Hot Apps Program offers developers who use the Plug-In Development Kit to bring their C/C++ apps to Palm for a share of $1 Million in cash or HP Products. Visit us here for more details: http://ad.doubleclick.net/clk;226879339;13503038;l? http://clk.atdmt.com/CRS/go/247765532/direct/01/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Error BB02. Volume created successfully?
For some reason these lines/errors aren't showing up in the log file. Could this be because they were being outputted to bconsole when I was logged in and not saved to the log? Seems unlikely but can't think of another reason. The log files modify date is today so it appears to be the correct file (specified in bacula-dir.conf) JJ -Original Message- From: John Drescher [mailto:dresche...@gmail.com] Sent: Monday, July 26, 2010 4:30 PM To: Jeremiah D. Jester Cc: bacula-users Subject: Re: [Bacula-users] Error BB02. Volume created successfully? 2010/7/26 Jeremiah D. Jester : > I'm getting a bunch of error messages stating a "Volume data error" when I > run 'label barcodes'. John Drescher advised me to rewind that tape and write > and eof to clear the data. However, in this case I did notice that the last > line of output states that it was the volume was created successfully. > Interesting enough the volume does not appear when I issue a 'status slots'. > Any thoughts on this? > > > > Here is the full error message output for one of the volumes. > > > > Thanks, > > JJ > > > > Sending label command for Volume "KL0433" Slot 14 ... > > 3307 Issuing autochanger "unload slot 13, drive 1" command. > > 3304 Issuing autochanger "load slot 14, drive 1" command. > > 3305 Autochanger "load slot 14, drive 1", status is OK. > > block.c:275 Volume data error at 0:0! Wanted ID: "BB02", got "". Buffer > discarded. > > 3000 OK label. VolBytes=64512 DVD=0 Volume="KL0433" Device="Drive2" > (/dev/nst1) > > Catalog record for Volume "KL0433", Slot 14 successfully created. > > Can you look in the log for the timing. Normally the time is listed by each message. I want to see if the system is giving the load enough time. John -- The Palm PDK Hot Apps Program offers developers who use the Plug-In Development Kit to bring their C/C++ apps to Palm for a share of $1 Million in cash or HP Products. Visit us here for more details: http://ad.doubleclick.net/clk;226879339;13503038;l? http://clk.atdmt.com/CRS/go/247765532/direct/01/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Error BB02. Volume created successfully?
2010/7/26 Jeremiah D. Jester : > I’m getting a bunch of error messages stating a “Volume data error” when I > run ‘label barcodes’. John Drescher advised me to rewind that tape and write > and eof to clear the data. However, in this case I did notice that the last > line of output states that it was the volume was created successfully. > Interesting enough the volume does not appear when I issue a ‘status slots’. > Any thoughts on this? > > > > Here is the full error message output for one of the volumes. > > > > Thanks, > > JJ > > > > Sending label command for Volume "KL0433" Slot 14 ... > > 3307 Issuing autochanger "unload slot 13, drive 1" command. > > 3304 Issuing autochanger "load slot 14, drive 1" command. > > 3305 Autochanger "load slot 14, drive 1", status is OK. > > block.c:275 Volume data error at 0:0! Wanted ID: "BB02", got "". Buffer > discarded. > > 3000 OK label. VolBytes=64512 DVD=0 Volume="KL0433" Device="Drive2" > (/dev/nst1) > > Catalog record for Volume "KL0433", Slot 14 successfully created. > > Can you look in the log for the timing. Normally the time is listed by each message. I want to see if the system is giving the load enough time. John -- The Palm PDK Hot Apps Program offers developers who use the Plug-In Development Kit to bring their C/C++ apps to Palm for a share of $1 Million in cash or HP Products. Visit us here for more details: http://ad.doubleclick.net/clk;226879339;13503038;l? http://clk.atdmt.com/CRS/go/247765532/direct/01/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Error BB02. Volume created successfully?
I'm getting a bunch of error messages stating a "Volume data error" when I run 'label barcodes'. John Drescher advised me to rewind that tape and write and eof to clear the data. However, in this case I did notice that the last line of output states that it was the volume was created successfully. Interesting enough the volume does not appear when I issue a 'status slots'. Any thoughts on this? Here is the full error message output for one of the volumes. Thanks, JJ Sending label command for Volume "KL0433" Slot 14 ... 3307 Issuing autochanger "unload slot 13, drive 1" command. 3304 Issuing autochanger "load slot 14, drive 1" command. 3305 Autochanger "load slot 14, drive 1", status is OK. block.c:275 Volume data error at 0:0! Wanted ID: "BB02", got "". Buffer discarded. 3000 OK label. VolBytes=64512 DVD=0 Volume="KL0433" Device="Drive2" (/dev/nst1) Catalog record for Volume "KL0433", Slot 14 successfully created. Jeremiah Jester Senior Informatics Specialist UW Microbiology - Katze Lab Box 357242 P: 206-732-6185 -- The Palm PDK Hot Apps Program offers developers who use the Plug-In Development Kit to bring their C/C++ apps to Palm for a share of $1 Million in cash or HP Products. Visit us here for more details: http://ad.doubleclick.net/clk;226879339;13503038;l? http://clk.atdmt.com/CRS/go/247765532/direct/01/___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users